Central Lane-based Life Time Routing Protocol in Vehicular Ad Hoc Network

Past few decades have witnessed large increase in number of vehicles on roads due to which the traffic safety needs have also become complex and hence necessary to be taken care of. Vehicular ad hoc networks (VANETs) are becoming an asset for achieving all these goals. VANETs provide applications like driver assistance, passenger comfort and vehicle safety. Apart from its general characteristics due to the dynamic nature of road environments and traffic patterns, communication linkage among vehicles in VANETs suffers breakage problem hence requires a very reliable routing protocol. To manage the communication efficiently many routing protocols are already available for MANETs which can be further used for routing and communication among vehicles in VANETs, but characteristics of these two networks (VANET and MANET) are very different, so there is requirement to enhance these MANET routing protocols so that those can be used in VANETs. When we use some existing routing protocols in VANET then number of link breakage are surprisingly high because mobility is higher in VANETs as compared to MANETs. So this paper presents advanced version of an existing MANET routing protocol for better performance in VANET environment. The new routing protocol has removed problem of large number of routing error messages which was existing in AODV routing protocol. Protocol proposed in this paper has better results as compared to AODV and paper has also shown results of simulation and also elaborated the findings.

Vehicular ad-hoc network (VANET) technology enables communication between vehicles, or vehicles and road-side units (RSUs) through wireless communication devices installed on the vehicles. One of the most important goals of VANETs is providing safety applications for passengers. In addition, VANETs provide comfort applications to users. Guaranteeing a reliable and stable routing protocol over VANETs is a very important step. The proposed research attempts to improve routing protocols that decrease the end-to-end delay to suit VANET communication characteristics. In addition, it proposes analysis of the end-to-end delay probability distribution. More specifically, we derive a closed-form expression for the probability distribution of the re-healing delay in a VANET conditioned on the distance between two VANET clusters. Furthermore, we propose a closed-form expression for the probability distribution of the unconditional re-healing delay. Moreover, we develop a mathematical model to calculate the probability distribution of the end-to-end delay. On the other hand, using Unmanned Aerial Vehicles (UAVs) or drones in wireless communications and Vehicular Ad-hoc Networks (VANETs) has started to attract attention. We propose a routing protocol that uses infrastructure drones for boosting VANET communications to achieve a minimum vehicle-to-drone packet delivery delay. In addition, we propose a closed-form expression for the probability distribution of the vehicle-to-drone packet delivery delay on a two-way highway. Moreover, based on that closed-form expression, we can calculate the minimum drone density (maximum separation distance between two adjacent drones) that stochastically limits the worst case of the vehicle-to-drone packet delivery delay. Furthermore, we propose a drones-active service (DAS) that is added to the location service in a VANET. This service dynamically and periodically obtains the required number of active drones based on the current highway connectivity state by obtaining the maximum distance between each two adjacent drones while satisfying a probabilistic constraint for vehicle-todrone packet delivery delay. Our analysis focuses on two-way highway VANET networks with low vehicular density. The simulation results show the accuracy of our analysis and reflect the relation between the drone density, vehicular density and speed, other VANET parameters, and the vehicle-to-drone packet delivery delay. In addition, we propose a new routing protocol called multi-copy intersection-based routing (MCIR) for vehicular ad-hoc networks (VANETs) in urban areas. MCIR is an intersectionbased routing protocol that forwards multiple copies of the packets in different road segments. Moreover, it is a beacon-less routing protocol with a carry-and-forward strategy. We show via simulation that the MCIR protocol is superior to other existing routing protocols, especially in low vehicular density scenarios. The results show that MCIR achieves a shorter end-to-end delay and a higher packet delivery ratio in urban VANET communications.

Intelligent Transportation Systems (ITS) is an integrated approach being developed to exchange relevant information to increase the safety and efficiency of the road transportation systems. Vehicular Ad hoc Network (VANET), a variant of mobile ad hoc networks (MANET), is a core component of ITS. Performance of this smart ITS mainly owes to the design of efficient routing protocols in VANETs. Distinct features of VANETs like unsteady connectivity, high mobility and partitioning of the network have made routing of the information in VANETs difficult and challenging, hence dictating the development of efficient routing protocols. The computation of the best route measures the performance of communication whereas routing protocols takes care of communication & routing of the data. Provision of smart communication, necessitates the analysis of routing protocols in VANET. Accordingly in this paper we have reviewed various types of existing routing protocols in VANET, listing their advantages and disadvantages. Lastly possible inclinations of forthcoming research linked to VANET routing are discussed.

HyBR: A Hybrid Bio-inspired Bee swarm Routing protocol for safety applications in Vehicular Ad hoc NETworks (VANETs)

Vehicular ad hoc networks (VANETs) present an intriguing platform for several applications on e.g., intelligent transportation system (ITS) and infotainment applications aspire to be the main pattern of communication among vehicles while travelling. This can significantly impact on the amount of data exchanged by vehicles, increasing the contention on communication links and thus, degrading the quality of service of these applications. So, discrimination of data becomes imperative and forwarding critical information on suitable routes becomes decisive. Hence, a quality of service (QoS)-driven mechanism is needed to handle and assign network resources according to the stringent application data traffic demands. But, VANETs high node mobility and frequent link failure, stuck a big challenge in implementing an effective policy to meet and enforce these QoS requirements. A promising way to tackle this issue is to enforce QoS at the network layer, since it is the crucial point in VANETs’ communication. So, over the years, many QoS-aware routing protocols were specifically conceived for VANETs. In this paper, we present a comprehensive survey of QoS-aware routing protocols in VANETs’ literature. We examined the protocols based on their ability to support ITS infotainment services, their multi-constraint path problem (MCP), protocol’s functionality and weakness, objectives and design challenges. This way, we outline future directions for VANETs QoS-aware protocol research.

VANET (Vehicular Ad Hoc Network) is a significant term in ITS (intelligent transportation systems). VANETs are also mentioned as ITN (intelligent transportation Networks), which are used to enhance road safety in growing technology. The connectivity of nodes is a challenging one because of its high mobility and the sparse network connectivity must be handled properly during its initial deployment of a VANET for avoiding accidents. Quality of service (QoS) in VANET becomes a significant term because of its increasing dare about unique features, like poor link quality, high mobility, and inadequate transporting distance. Routing is the foremost issue in the wireless ad hoc network, which is used to transmit data packets significantly. This paper provides a crucial review of the classification of existing QoS routing protocols, cross-layer design approach and classification, and various performance parameters used in QoS routing protocols. The corresponding cross-layer protocols are overviewed, followed by the major techniques in cross-layer protocol design. Moreover, VANET is presented with many exclusive networking research challenges in precise areas such as security, QoS, mobility, effective channel utilization, and scalability. Finally, the paper concluded by various comparison discussion, issues, and challenges of several routing protocols for VANET. No. of publications over the period from 2010 to 2019 in various scientific sources also showed in this review. This survey provided the technical direction for researchers on routing protocols for VANET using QoS.

SummaryIn a vehicular ad‐hoc network (VANET), each vehicle is equipped with an on‐board unit to communicate vehicle to vehicle or vehicle to fixed infrastructure. VANET technology is offered to provide many facilities to passengers and drivers, including safety, entertainment, mobile commerce, driver assistance, and emergency alarms. VANET has unique features such as high‐speed node mobility and network topology dynamics. These special features cause many problems such as increased transmission delays and packet loss. On the other hand, providing a good routing plan for VANET is a critical issue. Therefore, this article proposes a cluster‐based routing using in‐vehicle meta‐heuristic algorithms (CRMHA‐VANET) which has two phases. In the first stage, the vehicles are clustered and the most suitable cluster head (CH) is selected using the gray wolf optimization algorithm (GWO). In the next step, the next suitable CH is selected for data transmission in direct paths using the technique for order of preference by similarity to ideal solution (TOPSIS). The performance of the proposed method is analyzed through several criteria such as package delivery rate, end‐to‐end delay and throughput. CRMHA‐VANET results in a 10% to 25% improvement over all performance metrics, that is, packet delivery rate, latency, and throughput, over CRBP (clustering routing based on PSO [particle swarm optimization]), WCV (weight based clustering for VANET), and AODV‐CD methods.

Research on vehicular ad hoc networks (VANETs) has focused primarily on efficient routing protocol design under conditions where there are relatively large numbers of closely spaced vehicles, typical of major highways and urban areas. These routing protocols are designed principally for fully connected networks and are not suitable for packet delivery in a sparse, partially connected VANET. In rural areas, vehicle densities are low and roadway communication infrastructure is scarce, leading to long periods where vehicle-to-vehicle or vehicleto- roadside communications is infrequent, interrupted, or simply not possible. These attributes characterize a sparse VANET, and are characteristic of delay tolerant networks (DTNs). In this paper, we examine the challenges of VANETs in sparse network conditions, review alternatives including epidemic routing and propose a Border node Based Routing (BBR) protocol for partially connected VANETs. Unlike many VANET protocols that assume location awareness or mobility patterns to aid in routing decisions, BBR is designed to function in domains where location and mobility information is not available, as is typical in rugged terrain conditions. The BBR protocol can tolerate network partition due to low node density and high node mobility. The performance of this protocol is evaluated in OPNET TM with a Random Waypoint mobility model and a Geographic and Traffic Information (GTI) based mobility model that captures typical highway conditions. The simulation results are compared with those obtained using the Dynamic Source Routing (DSR) protocol and with an epidemic routing protocol. The simulation results show that BBR performs well for partially connected VANETs where other protocols fail and provides the advantage of not relying on a location service required by other protocols proposed for VANETs.

Vehicular communication ad hoc routing protocols: A survey

Vehicular ad hoc networks (VANETs) are a new emerging recently developed advanced technology that allows a wide group of applications related to providing more safety on roads, more convenience for passengers, self-driven vehicles, and intelligent transportation systems (ITS). There are various routing protocol categories used in VANETs, like unicast, multicast, and broadcast protocols. In unicast position-based protocols, the routing decisions are based on the geographic position of the vehicles. This does not require establishment or maintenance of routes but needs location services to determine the position of the destination. Non-delay-tolerant network protocols (non-DTN), also identified as minimum delay protocols, are aimed at minimizing the delivery time of the information. Delay-tolerant protocols (DTN) are used in a variety of operating environments, including those that are subject to failures and interruptions and those with high delay, such as VANETs. This paper discusses the comparison between non-DTN and DTN routing protocols belonging to the unicast delay-tolerant position-based category. The comparison was conducted using the NS2 simulator, and the simulations of three non-DTN routing protocols and three DTN routing protocols were recorded. Simulation results show that the DTN routing protocols outperform in delivery ratio compared to the non-DTN routing protocols, but they lead to more average delay due to buffering, the processing algorithm, and priority calculation. In conclusion, non-DTN protocols are more suitable for the city environment since the distance between nodes is relatively smaller and the variations in the network topology are slower than they are on highways. On the other hand, DTN protocols are more suitable for highways due to the buffering of packets until a clear route to destination is available.

Intelligent Transportation System (ITS) is a critical factor for Vehicular Ad hoc Networks (VANET). Even though VANET belongs to the class of Mobile Ad hoc Network (MANET), none of the MANET routing protocol applies to VANET. VANET network is dynamic, due to increased vehicle speed and mobility. Vehicle mobility of VANET affects conventional routing algorithm performance, which deals with the dynamicity of the network node. The evaluation of the existing research stated that Ad hoc On-Demand Distance Vector (AODV) is an effective MANET protocol to adopt network changes for significant resource utilization and also provides effective adaptation in the network change. Due to the effective performance of the AODV protocol, it is considered as an effective routing protocol for VANET. This paper proposed an ad hoc TROPHY (TAD-HOC) routing protocol for the VANET network for increasing efficiency and effective resource utilization of the network. To improve the overall performance, ad hoc network is combined with Trustworthy VANET ROuting with grouP autHentication keYs (TROPHY) protocol. The proposed TAD-HOC protocol transmits data based on time demand in the VANET network with the desired authentication. Results of the proposed approach show the increased performance of the VANET network with packet delay, transmission range, and end-to-end delay. The comparative analysis of the proposed approach with I-AODV, AODV-R, and AODV-L shows that the proposed TAD-HOC exhibited effective performance.

In vehicular ad hoc networks (VANETs), because of the nonexistence of end-to-end connections, it is essential that nodes take advantage of connection opportunities to forward messages to make end-to-end messaging possible. Thus, it is crucial to make sure that nodes have incentives to forward messages for others, despite the fact that the routing protocols in VANETs are different from traditional end-to-end routing protocols. In this paper, we study how to stimulate message forwarding in VANETs. Our approach is based on coalitional game theory. In particular, we propose an incentive scheme for VANETs and rigorously show that with our scheme, faithfully following the routing protocol is in the best interest of each node. In addition, we extend our scheme to taking the limited storage space of each node into consideration. Experiments on testbed trace data verify that our scheme is effective in stimulating cooperation of message forwarding in VANETs.

A Vehicular Ad-hoc Network (VANET) is an essential component of intelligent transportation systems in the building of smart cities. A VANET is a self-configure high mobile and dynamic potential wireless ad-hoc network that joins all vehicle nodes in a smart city to provide in-vehicle infotainment services to city administrators and residents. In the smart city, the On-board Unit (OBU) of each vehicle has multiple onboard sensors that are used for data collection from the surrounding environment. One of the main issues in VANET is energy efficiency and balance because the small onboard sensors can’t be quickly recharged once installed on On-board Units (OBUs). Moreover, conserving energy stands out as a crucial challenge in VANET which is primarily contingent on the selection of Cluster Heads (CH) and the adopted packet routing strategy. To address this issue, this paper proposes distance and energy-aware clustering algorithms named SOMNNDP, which use a Self-Organizing Map Neural Network (SOMNN) machine learning technique to perform faster multi-hop data dissemination. Individual Euclidean distances and residual node energy are considered as mobility parameters throughout the cluster routing process to improve and balance the energy consumption among the participating vehicle nodes. This maximizes the lifetime of VANET by ensuring that all intermediate vehicle nodes use energy at approximately the same rate. Simulation findings demonstrate that SOMNNDP improves Quality of Service (QoS) better and consumes 17% and 14% less energy during cluster routing than distance and energy-aware variation of K-Means (KM) and Fuzzy C-Means (FCM) called KMDP and FCMDP respectively.

Vehicular ad hoc network (VANET) has attracted more attention for providing safe and efficient traffic management in the modern roads. Performance of the VANET depends on proper routing protocol, mobility management, and efficient inter-vehicular communications. To ensure the optimal data forwarding and energy efficiency in VANET, a suitable network hierarchy is required. In this paper, we propose a new optical network-based clustering hierarchy (ONCH) to improve the quality of services of the VANET. In the proposed scheme, the road side units (RSUs) of a VANET will be divided into several small groups called clusters. In each cluster, an RSU will act as gateway node and each gateway node will be connected to the WiMAX base station through optical fiber. We have analyzed the performance of the proposed ONCH scheme by numerical simulations. The simulated results prove that the ONCH scheme of VANET provides higher energy efficiency than the conventional wireless network-based clustering hierarchy (WNCH) scheme of VANET.

Vehicular ad hoc network (VANET) is a type of mobile ad hoc network (MANET) that forms vehicles as nodes. Routing is the basic fundamental requirement of VANET applications. Therefore, it is necessary to devise a routing protocol that fits well for rapid topology changes and disconnected network conditions. To address these specific needs of VANET, we present a novel greedy routing protocol for vehicular networks called VRPTA that suite well for both city environment and the high way environment. With the help of localisation system named global positioning system (GPS), the proposed protocol is designed to efficiently relay the data in the network by considering different scenarios like road traffic variation and various environment characteristics. The protocol communicates in between vehicles as well as vehicle to infrastructure whichever is applicable, thereby ensuring reliable transmission. In addition, we also consider the information about vehicles speed, direction and density of a city traffic configuration consisting of double direction roads, multi lanes and highway scenario. The work is implemented using NS2 simulator.