Challenges in bridging the gap between protein structure prediction and functional interpretation.

Proteins are essential parts of our life and participate in virtually every process within a cell. The understanding of protein structures is vital to determine the function of a protein. Protein structure prediction (PSP) from amino acid sequence is one of the high focus problems in bioinformatics today. This is due to the fact that the biological function of the protein is determined by its three dimensional structure. Thus, protein structure prediction is a fundamental area of computational biology. Its importance is intensed by large amounts of sequence data coming from PDB (Protein Data Bank) and the fact that experimentally methods such as X-ray crystallography or Nuclear Magnetic Resonance (NMR)which are used to determining protein structures remains very expensive and time consuming. For minimizing the time, computational methods are used for protein folding and structure prediction problem. In this paper results of protein p53 are discussed.

Protein structure prediction (PSP) problems are a major biocomputing challenge, owing to its scientific intrinsic that assists researchers to understand the relationship between amino acid sequences and protein structures, and to study the function of proteins. Although computational resources increased substantially over the last decade, a complete solution to PSP problems by computational methods has not yet been obtained. Using only one energy function is insufficient to characterize proteins because of their complexity. Diverse protein energy functions and evolutionary computation algorithms have been extensively studied to assist in the prediction of protein structures in different ways. Such algorithms are able to provide a better protein with less computational resources requirement than deep learning methods. For the first time, this study proposes a many-objective PSP (MaOPSP) problem with four types of objectives to alleviate the impact of imprecise energy functions for predicting protein structures. A many-objective evolutionary algorithm (MaOEA) is utilized to solve MaOPSP. The proposed method is compared with existing methods by examining 34 proteins. An analysis of the objectives demonstrates that our generated conformations are more reasonable than those generated by single/multiobjective optimization methods. Experimental results indicate that solving a PSP problem as an MaOPSP problem with four objectives yields better PSPs, in terms of both accuracy and efficiency. The source code of the proposed method can be found at <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://toyamaailab.github.io/sourcedata.html</uri> .

Background: The Mycobacterium tuberculosis complex (MTBC) bacteria include the slowly growing, host-associated bacteria Mycobacterium tuberculosis, Mycobacterium Bovis, Mycobacterium microti, Mycobacterium africanum, Mycobacterium pinnipedii. Aim: Comparative Functional Genomics Studies for understanding the Hypothetical Proteins in Mycobacterium tuberculosis variant microti 12. Objective: A computational genomics study was performed to understand the 247 hypothetical protein genes. Functional annotation of virtual proteins was performed on different servers to maximize confidence level. Methods: Sequence Retrieval. The whole genome sequences for the Mycobacterium tuberculosis micro variant 12 were retrieved from the KEGG database ( http://www.genome.jp/kegg/) and were used for screening 247 hypothetical proteins (Fig. 1 ). Functional Annotation and Sub-cellular localization. The Mycobacterium tuberculosis micro variant 12 hypothetical proteins were screened and sorted out from the genome and were individually analyzed for the presence of conserved functional domains by using computational biology tools like CDD-BLAST ( https://www.ncbi.nlm.nih.gov/Structure/cdd/wrpsb.cgi) ;Pfam ( http://pfam.xfam.org/ncbiseq/398365647); The subcellular localization of hypothetical proteins was determined by CELLO2GO ( http://cello.life.nctu.edu.tw). These web tools can search the defined conserved domains in the sequences available in the online servers or databases and assist in the classification of proteins in the appropriate families. Protein Structure Prediction. The in-silico structure predictions of the hypothetical protein sequences showing functional properties were carried out by using the PS2 Protein Structure Prediction Server ( http://www.ps2.life.nctu.edu.tw/). The online server helps to generate the 3D structures of the hypothetical proteins. The server accepts the sequences in FASTA format as a query to generate resultant proteins 3D structures. The structure determination is completely based on the conserved template regions detected during functional annotations. Protein-protein interaction through String database: The interaction of each hypothetical protein analyzed for functional characteristics was subjected to a protein-protein interaction server for the prediction of a possible functional role in interaction amongst the available known proteins ( https://string-db.org/). This information can help us to further validated the functional role of such hypothetical proteins and their possible role in the Mycobacterium Tuberculosis micro variant. Protein secondary structure prediction through JPred4: The secondary structure prediction of all the hypothetical proteins was determined through JPred4 ( http://www.compbio.dundee.ac.uk/jpred4/index.html) and served to identify the available secondary structures in the unknown hypothetical protein sequences. These further help us to understand the available templates in the uncharacterized protein sequences for the prediction of novel functions associated with these proteins. The predictions were further characterized by the Phyre2 server for structural modeling and prediction of templates based on comparative analysis based on conserved domains. Protein modeling, prediction, and analysis through Phyre2. The hypothetical proteins which were identified to have functional properties were further characterized by the Phyre2 server ( http://www.sbg.bio.ic.ac.uk/phyre2) for structural modeling and prediction of templates based on comparative analysis based on conserved domains. Results: A computational genomics study was performed to understand the 247 hypothetical protein genes Functional annotation of virtual proteins, and was performed on different servers to maximize confidence level. The functional prediction was performed by CDD-Blast and Pfam. The gene sequences of proteins have probably been successfully functionally annotated, characterized, and their subcellular localization and 3-D structural predictions have been predicted computationally. Online automated bioinformatics tools such as CDD-Blast, Pfam, CELLO2GO and PS2-Server were used for the structural and functional characterization of screened hypothetical proteins. The structure, function, and subcellular localization of a hypothetical protein from Mycobacterium tuberculosis variant microti 12 have been obtained and presented (Fig. 2 ). Also, the three-dimensional structure generated after using the template with the highest score was displayed as the template ID in the structure column of the respective hypothetical protein. However, as systems biology denies hypothetical protein functions, the structures of such proteins can be tested through biological processes and experiments, making them suitable for understanding their role in the life cycle, pathogenesis, and drug development. We can further explore these predictive possibilities in pharmaceuticals, and other clinically relevant studies. This study by HP helped find structure-function relationships in Mycobacterium tuberculosis variant microti 12 using a variety of bioinformatics tools. The string database made predictions about protein-protein interactions and the template helped us predict a hypothetical protein structure and even helped us find its 3D protein structure. Protein profiling can be performed on structures retrieved from these servers. This is useful for proteomics studies, including protein-protein interactions, protein expression of specific hypothetical proteins, and post-translational modifications of protein-coding genes. Further understanding of these hypothetical proteins can help us to know more about the Mycobacterium tuberculosis complex (MTBC) and may assist in Drugs and inhibitors against different pathogens within this complex. Conclusion: The all-inclusive bioinformatic study has helped to functionally elucidate 247 hypothetical proteins, which have resulted and made it easier to understand many functional proteins available in the Mycobacterium tuberculosis micro variant 12. The subcellular localization of the 247 sorted hypothetical proteins was also carried &amp;amp; which further helped us understand the localization of identified enzymes or proteins. We have successfully characterized the 247 unknown proteins of hypothetical protein sequences from Mycobacterium tuberculosis micro variant 12 to validate their structure and functions of the gene products. These predicted functions and three-dimensional structures may lead to establishing their role in the life cycle of the bacterium. This computationally generated data can also be further used for developing new protocols for new vaccines against Mycobacterium tuberculosis micro variant 12 that are essential for preventing infection, diseases, and transmission. This complete result of Hypothetical Protein is needed for further studies of the whole genomic of the Mycobacterium Tuberculosis micro variant 12 for their function interpretation which further help in the understanding of its functions as well as structure. Moreover, this interpretation would help us to study the evolution of Mycobacterium Tuberculosis micro variant 12 which further helps in the process of discovering the drugs to inhibit the causes of diseases.

BackgroundAs genome sequencing is becoming routine in biomedical research, the total number of protein sequences is increasing exponentially, recently reaching over 108 million. However, only a tiny portion of these proteins (i.e. ~75,000 or < 0.07%) have solved tertiary structures determined by experimental techniques. The gap between protein sequence and structure continues to enlarge rapidly as the throughput of genome sequencing techniques is much higher than that of protein structure determination techniques. Computational software tools for predicting protein structure and structural features from protein sequences are crucial to make use of this vast repository of protein resources.ResultsTo meet the need, we have developed a comprehensive MULTICOM toolbox consisting of a set of protein structure and structural feature prediction tools. These tools include secondary structure prediction, solvent accessibility prediction, disorder region prediction, domain boundary prediction, contact map prediction, disulfide bond prediction, beta-sheet topology prediction, fold recognition, multiple template combination and alignment, template-based tertiary structure modeling, protein model quality assessment, and mutation stability prediction.ConclusionsThese tools have been rigorously tested by many users in the last several years and/or during the last three rounds of the Critical Assessment of Techniques for Protein Structure Prediction (CASP7-9) from 2006 to 2010, achieving state-of-the-art or near performance. In order to facilitate bioinformatics research and technological development in the field, we have made the MULTICOM toolbox freely available as web services and/or software packages for academic use and scientific research. It is available at http://sysbio.rnet.missouri.edu/multicom_toolbox/.

Inter-residue interactions play an essential role in driving protein folding, and analysis of these interactions increases our understanding of protein folding and stability and facilitates the development of tools for protein structure and function prediction. In this work, we systematically characterized the change of inter-residue interactions at various sequence separation cutoffs using two protein datasets. The first set included 100 diverse, nonredundant and high-resolution soluble protein structures, covering all four major structural classes, all-alpha, alpha/beta, alpha+beta, and all-beta; and the second set included 20 diverse, nonredundant and high-resolution membrane protein structures, representing 19 unique superfamilies. It was shown that the average number of inter-residue interactions in structures of both datasets displays the power-law behavior. Fitting parameters of the power-law function are directly related to the structural classes analyzed. These findings provided further insight into the distribution of short-, medium-, and long-range inter-residue interactions in both soluble and membrane proteins and could be used for protein structure prediction.

ProteinShop Gives Researchers a Hands-On Tool for Manipulating, Visualizing Protein Structures. The Human Genome Project and other biological research efforts are creating an avalanche of new data about the chemical makeup and genetic codes of living organisms. But in order to make sense of this raw data, researchers need software tools which let them explore and model data in a more intuitive fashion. With this in mind, researchers at Lawrence Berkeley National Laboratory and the University of California, Davis, have developed ProteinShop, a visualization and modeling program which allows researchers to manipulate protein structures with pinpoint control, guided in large part by their own biological and experimental instincts. Biologists have spent the last half century trying to unravel the ''protein folding problem,'' which refers to the way chains of amino acids physically fold themselves into three-dimensional proteins. This final shape, which resembles a crumpled ribbon or piece of origami, is what determines how the protein functions and translates genetic information. Understanding and modeling this geometrically complex formation is no easy matter. ProteinShop takes a given sequence of amino acids and uses visualization guides to help generate predictions about the secondary structures, identifying alpha helices and flat beta strands, and the coil regions that bind them. Once secondary structures are in place, researchers can twist and turn these pre-configurations until they come up with a number of possible tertiary structure conformations. In turn, these are fed into a computationally intensive optimization procedure that tries to find the final, three-dimensional protein structure. Most importantly, ProteinShop allows users to add human knowledge and intuition to the protein structure prediction process, thus bypassing bad configurations that would otherwise be fruitless for optimization. This saves compute cycles and accelerates the entire process, so that more and larger problems can be attempted. Currently, the program designers are working to make ProteinShop more applicable and adaptable to different protein folding methodologies. If users could manipulate structures from a biological point of view, and then put them back in the queue for more optimization, the process of experimentation and discovery in protein research could be greatly enhanced. The group is also investigating the use of stereoscopic rendering and three-dimensional input devices to remove the limitations of a two-dimensional interface. Clearly, protein-folding research will have far-reaching ramifications. It could lead to new insights about diseases ranging from Alzheimer's to Cystic fibrosis, which scientists believe are caused by protein folding gone wrong. A better understanding of protein structures could also lead to the engineering of altogether new proteins, and shed light on how drugs bind proteins to alter their structure and function. Above all, ProteinShop is an important tool that will help scientists unravel one of the most challenging problems that theoretical and computational chemistry has to offer.

Protein structure prediction is defined as predicting the tertiary structure from the primary structure of the protein sequence. Because the real protein structure is very complex, it is necessary to adopt the simplified structure model for studying protein 3D space structure. In this paper, we introduce a kind of 3D AB off-lattice model for protein structure prediction, and the amino acids are labeled as two hydrophobic amino acids and hydrophilic amino acids. When the protein model is simplified, the optimization algorithm is also needed to use for searching the lowest energy conformation of the protein sequence based on the hypothesis theory. In this paper, a hybrid algorithm which combines PSO algorithm based on local adjust strategy (LAPSO) and genetic algorithm, was proposed to search the space structure of the protein with AB off-lattice model. Experimental results show that the minimal energy values obtained by the improved LAPSO are lower than those obtained by previous methods. The performance of our improved algorithm is better, and it can effectively solve the search problem of the protein space folding structure.

The seminal work of Bowie, Lüthy, and Eisenberg (Bowie et al., 1991) on “the inverse protein folding problem” laid the foundation of protein structure prediction by protein threading. By using simple measures for fitness of different amino acid types to local structural environments defined in terms of solvent accessibility and protein secondary structure, the authors derived a simple and yet profoundly novel approach to assessing if a protein sequence fits well with a given protein structural fold. Their follow-up work (Elofsson et al., 1996; Fischer and Eisenberg, 1996; Fischer et al., 1996a,b) and the work by Jones, Taylor, and Thornton (Jones et al., 1992) on protein fold recognition led to the development of a new brand of powerful tools for protein structure prediction, which we now term “protein threading.” These computational tools have played a key role in extending the utility of all the experimentally solved structures by X-ray crystallography and nuclear magnetic resonance (NMR), providing structural models and functional predictions for many of the proteins encoded in the hundreds of genomes that have been sequenced up to now.

One of the main research problems in Structural Bioinformatics is related to the prediction of three-dimensional structures (3-D) of polypeptides or proteins. The rate at which amino acid sequences are identified is increasing faster than the 3-D protein structure determination by experimental methods. Computational prediction methods have been developed during the last years, but the problem still remains challenging because of the complexity and high dimensionality of a protein conformational search space. In this article we present a hybrid genetic algorithm for the Protein Structure Prediction (PSP) Problem. A genetic algorithm is combined with a structured population, and it is hybridized with a path-relinking procedure that helps the algorithm to scape from local minima. We perform a set of experiments and show that the proposed hybrid genetic algorithm is effective in finding good quality solutions for the PSP Problem.

Most computational protein structure prediction methods are designed for either template based or template-free (ab initio) structure prediction. The approaches that integrate the prediction capabilities of both template-based modeling and template-free modeling are needed to synergistically combine the two kinds of methods to improve protein structure prediction. In this work, we develop a new method to integrate several protein structure prediction methods including our template-based MULTICOM server, our ab initio contact-based protein structure prediction method CONFOLD, our multi-template-based model generation tool MTMG, and locally installed external Rosetta, I-TASSER and RaptorX protein structure prediction tools to improve protein structure prediction of a fullspectrum difficulty ranging from easy, to medium and to hard. Our method participated in the 11(th) community-wide Critical Assessment of Techniques for Protein Structure Prediction (CASP11) in 2014 as MULTICOM-NOVEL server. It was ranked among top 10 methods for protein tertiary structure prediction according to the official CASP11 assessment, which demonstrates that integrating complementary modeling methods is useful for advancing protein structure prediction.

The abundance of different protein variants generated by alternative splicing (AS) is not fully represented in the Protein Structure Database (PDB). Among the already limited set of proteins with experimentally determined structures deposited in PDB, only a small fraction have structures ofmore than one splicing variant. In the absence of experimental data, computational methods can be used to predict the structure of protein isoforms. In this chapter, the established approaches to computational protein structure prediction will be briefly described, and their use for studying differences that result from AS will be detailed. In particular, it will be noted when a reliable structural model can be obtained for a given protein sequence. Topics of finding the best template structures for modeling individual protein domains, predicting the structure of long, multidomain proteins, and assessing the quality of theoretical models, together with error correction, will also be addressed. The suggested protocol will be illustrated by the structure prediction of isoform C of phosphotyrosine phosphatase (LMPTP-C). 54.1 Theoretical Background In 1961, based on studies with ribonuclease A, Christian Anfinsen hypothesized that the structure of a protein in its native environment would be determined by the protein’s amino acid sequence, and that this native conformation is the one in which the Gibbs free energy of the system is lowest [1]. Since then, the prediction of a protein’s structure from its amino acid sequence has become the “holy grail” of computational biology. However, despite great efforts having been made, a universal algorithm with which to infer protein structure has not yet been developed. Nonetheless, several methods have been developed that can provide useful models, depending on a variety of conditions. There are two major approaches for protein structure prediction. The first approach, termed “comparative modeling” or “template-based modeling,” is based on the experimental observation that evolutionarily related proteins usually retain similar structures, despite an accumulation of substitutions at the level of amino acid sequence, and that the structure changes very slowly compared to the sequence [2]. Thus, an experimentally determined structure of one protein can be used as a template to model the structure of another related protein (a modeling target) by simulating the process of evolution at the sequence level.Modification of the template to “transmute” it into the target requires only limited computation. Therefore, comparative modeling does not require special computer resources, and can be easily carried out on a personal workstation using computer programs that are simple to install and use. Template-based modeling requires that, for a given target sequence, a structurally similar template is identified, and a correct target–template sequence alignment is Alternative pre-mRNA Splicing: Theory and Protocols, First Edition. Edited by Stefan Stamm, Chris Smith, and Reinhard Luhrmann. 2012 Wiley-VCH Verlag GmbH & Co. KGaA. Published 2012 by Wiley-VCH Verlag GmbH & Co. KGaA. j 583

Proteins are cellular macromolecules made up of linear chains of amino acids that adopt a unique three-dimensional structure to carry out specific biological functions. Amongst various computational approaches developed for Protein Structure Prediction (PSP), ab initio methods perform the prediction without prior knowledge of known structures. However, due to huge computational complexity incurred by these methods, simplified hydrophobic-polar (HP) models are often used for the investigations. Despite this simplicity, PSP continues to be a hard combinatorial optimization problem requiring development of efficient heuristic search techniques. Memetic algorithm (MA), with its flexible architecture, encompasses the strength of both local and global search and has shown promise in solving problems with complex search landscape, including PSP. This thesis is focused on developing an effective ab initio technique under a suitable MA framework for solving the PSP problem using low resolution HP models. To enhance the effectiveness of the MA, a mechanism is devised to include knowledge from the problem domain by exploiting the concept of hydrophobic-core (H-core) formation. The size of the maximal possible H-core is estimated and the approximation is validated by our proposed deterministic search technique. Further, a new knowledge-based initial population generation technique ensures generating conformations which are not only valid, but also maintain diversity in the population. This helps to commence the search with good seeds leading towards faster convergence. While solving the PSP problem using MA, the greatest intricacy arises from the complex nature of its multi-modal landscape. Like all the evolutionary algorithms (EAs), MAs have the tendency to get trapped into local minima due to selection pressure and genetic drift induced by the genetic operators, and techniques are necessary to surmount this difficulty. A novel parental selection technique called “Adaptive Strategy for Assortative Mating” is developed that dynamically distributes the re production opportunity among the individuals of the population to boost the effectiveness of cross-over. Further, a new survival selection strategy, namely “Sib-based Survival Selection”, prevents the rapid spread of genetic material from a particular individual to other members in the population, ensuring the concurrent preservation of several potential solutions, and restricting premature convergence. A new diversification mechanism, namely “Memory-based Diversification”, systematically diversifies the population by introducing new genetic material whenever it gets stuck at local peaks and allows it to proceed for further progress. An extensive experimental analysis is also reported on the influence of all three techniques proposed to maintain the diversity of population. Furthermore, in order to carry out the conformational search efficiently, especially with the increase in sequence length, the optimization technique is designed such that it provides an effective balance between exploration and exploitation. A robust Multimodal Memetic Framework has been developed where optimization is accomplished in hierarchical stages. The population of each stage is partitioned into three different states: an Exploratory state to locate promising peaks, an Exploitative state to fine-tune the solutions found in the Exploratory state of the previous stage, and finally, a Central state to carry out the formation of potential solutions to explore the undiscovered regions. Non-identical genetic operators have been implemented in each state to balance the exploration and exploitation by employing necessary selection pressure and diversity. A non-isomorphic encoding based technique has been developed to capture the sub-structures that are representing a particular region. Furthermore, a novel local search technique exploits already explored fit individuals by employing the knowledge of sub-structures. The efficacy of the proposed framework is demonstrated with an adequate number of distinctive data sets and comparison with state-of-the-art methods.

Chapter 1 of this thesis provides an overview of the structure and function of proteins as well as their investigation via NMR spectroscopy. Proteins are one of the most important building blocks of life. They are part of every organism and fulfill a variety of functions including, for example, the catalysis of many chemical reactions, which is the reason various processes in an organism become possible in the first place. Proteins are made up of amino acids, which are linked together via peptide bonds during the protein biosynthesis. The 22 proteinogenic amino acids result in an almost unlimited number of sequential combinations that give proteins their versatility. The sequence of amino acids in a protein is also called the primary structure. From this, locally limited structural motifs such as α-helices and β-sheets are formed, representing the secondary structure. Further intramolecular interactions create the tertiary structure of a protein, which can be seen as the overall three-dimensional structure of the protein. Furthermore, several individual proteins can assemble into a larger complex to form a quaternary structure. There are various methods for investigating the structure of proteins, including nuclear magnetic resonance (NMR) spectroscopy. In NMR spectroscopy, atomic nuclei with a non-zero nuclear spin are polarized by a constant magnetic field and then excited using radio frequency pulses. The emitted resonance frequencies are detected in the form of a free induction decay (FID) and converted into an NMR spectrum by a Fourier transformation. Many NMR experiments are available for researching proteins. By default, a two-dimensional 1H15N-HSQC spectrum is measured, which provides signals for each N-H bond in a protein meaning that one signal is obtained for each N-H in the backbone of the amino acids. Using 3D NMR experiments, these signals can then be assigned to the respective amino acids in the protein sequence. This makes it possible to investigate the dynamics of proteins as well as the formation of complexes with a ligand or another biomacromolecule if they interact. Further 3D NMR experiments also make it possible to assign the side-chains of the protein. With the help of the determined resonance assignments and spatial information from various NOESY spectra, a protein structure can then be calculated using a suitable computer program. Recently, the prediction of protein structures using AI (artificial intelligence)-supported programs has also become more prevalent. In particular, the artificial neural network AlphaFold has been extremely successful in predicting correct structures without any experimental data provided by the user. Chapter 2 of this thesis introduces the research field of small proteins. These are proteins with a length of usually less than 100 amino acids, although definitions in literature vary and upper limits of, for example, 50 or 200 amino acids exist as well. Various other names are also used to describe small proteins, such as μ-proteins or sORF-encoded peptides. The field of small proteins is still relatively new, as they were overlooked in research for many years. One reason for this was the lower limit of 100 codons that was set for the identification of open reading frames (ORFs) in genome projects. This served to exclude numerous biologically irrelevant ORFs from genome annotation. However, this meant that functional ORFs coding for small proteins were also ignored. Another reason was that experimental methods were not designed for the analysis of small proteins, meaning they could often not be detected at all. However, new analytical methods such as ribosome profiling and a generally increased focus on the detection of small proteins have led to their detection in all domains of life. In the research group of Prof. Dr. Schwalbe, small proteins of various prokaryotes were structurally characterized as part of a special priority program by the DFG. NMR spectroscopy was primarily used for this purpose, as it is the method of choice for the investigation of small proteins. The results of this research were published in several articles, two of which are part of this dissertation.

More than sixty years have passed since it has disclosed that protein can be developed from amino acid sequence. Structures of protein have proven to be a key piece of information for designing a drug, synthetic biology, and diagnosis of diseases. By knowing the protein structure, one can predict its function, find out how molecules or drugs skillfully bind with proteins and structural behavior of protein can help us to diagnose diseases and to invent new drugs. Due to the fast growth of protein sequence from the amino acid, it finds to be much more difficult with experimental techniques to obtain three-dimensional protein structures. Hence protein structure prediction (PSP) is still seen to be more important. Here in this paper, we are presenting a review about the formation of protein, different protein structure, factors affecting the tertiary structure, the importance of protein structure prediction, structural database, experimental and recent computational approaches for PSP, and similarity measures.

Sequence-based prediction of one dimensional structural properties of proteins has been a long-standing subproblem of protein structure prediction. Recently, prediction accuracy has been significantly improved due to the rapid expansion of protein sequence and structure libraries and advances in deep learning techniques, such as residual convolutional networks (ResNets) and Long-Short-Term Memory Cells in Bidirectional Recurrent Neural Networks (LSTM-BRNNs). Here we leverage an ensemble of LSTM-BRNN and ResNet models, together with predicted residue-residue contact maps, to continue the push towards the attainable limit of prediction for 3- and 8-state secondary structure, backbone angles (θ, τ, ϕ and ψ), half-sphere exposure, contact numbers and solvent accessible surface area (ASA). The new method, named SPOT-1D, achieves similar, high performance on a large validation set and test set (≈1000 proteins in each set), suggesting robust performance for unseen data. For the large test set, it achieves 87% and 77% in 3- and 8-state secondary structure prediction and 0.82 and 0.86 in correlation coefficients between predicted and measured ASA and contact numbers, respectively. Comparison to current state-of-the-art techniques reveals substantial improvement in secondary structure and backbone angle prediction. In particular, 44% of 40-residue fragment structures constructed from predicted backbone Cα-based θ and τ angles are less than 6 Å root-mean-squared-distance from their native conformations, nearly 20% better than the next best. The method is expected to be useful for advancing protein structure and function prediction. SPOT-1D and its data is available at: http://sparks-lab.org/. Supplementary data are available at Bioinformatics online.