Chapter 5 - Dealing with data: strategies of preprocessing data

Machine learning (ML) models provide more choices to patients with diabetes mellitus (DM) to more properly manage blood glucose (BG) levels. However, because of numerous types of ML algorithms, choosing an appropriate model is vitally important. In a systematic review and network meta-analysis, this study aimed to comprehensively assess the performance of ML models in predicting BG levels. In addition, we assessed ML models used to detect and predict adverse BG (hypoglycemia) events by calculating pooled estimates of sensitivity and specificity. PubMed, Embase, Web of Science, and Institute of Electrical and Electronics Engineers Explore databases were systematically searched for studies on predicting BG levels and predicting or detecting adverse BG events using ML models, from inception to November 2022. Studies that assessed the performance of different ML models in predicting or detecting BG levels or adverse BG events of patients with DM were included. Studies with no derivation or performance metrics of ML models were excluded. The Quality Assessment of Diagnostic Accuracy Studies tool was applied to assess the quality of included studies. Primary outcomes were the relative ranking of ML models for predicting BG levels in different prediction horizons (PHs) and pooled estimates of the sensitivity and specificity of ML models in detecting or predicting adverse BG events. In total, 46 eligible studies were included for meta-analysis. Regarding ML models for predicting BG levels, the means of the absolute root mean square error (RMSE) in a PH of 15, 30, 45, and 60 minutes were 18.88 (SD 19.71), 21.40 (SD 12.56), 21.27 (SD 5.17), and 30.01 (SD 7.23) mg/dL, respectively. The neural network model (NNM) showed the highest relative performance in different PHs. Furthermore, the pooled estimates of the positive likelihood ratio and the negative likelihood ratio of ML models were 8.3 (95% CI 5.7-12.0) and 0.31 (95% CI 0.22-0.44), respectively, for predicting hypoglycemia and 2.4 (95% CI 1.6-3.7) and 0.37 (95% CI 0.29-0.46), respectively, for detecting hypoglycemia. Statistically significant high heterogeneity was detected in all subgroups, with different sources of heterogeneity. For predicting precise BG levels, the RMSE increases with a rise in the PH, and the NNM shows the highest relative performance among all the ML models. Meanwhile, current ML models have sufficient ability to predict adverse BG events, while their ability to detect adverse BG events needs to be enhanced. PROSPERO CRD42022375250; https://www.crd.york.ac.uk/prospero/display_record.php?RecordID=375250.

BackgroundDespite the interest in machine learning (ML) algorithms for analyzing real-world data (RWD) in healthcare, the use of ML in predicting time-to-event data, a common scenario in clinical practice, is less explored. ML models are capable of algorithmically learning from large, complex datasets and can offer advantages in predicting time-to-event data. We reviewed the recent applications of ML for survival analysis using RWD in healthcare.MethodsPUBMED and EMBASE were searched from database inception through March 2023 to identify peer-reviewed English-language studies of ML models for predicting time-to-event outcomes using the RWD. Two reviewers extracted information on the data source, patient population, survival outcome, ML algorithms, and the Area Under the Curve (AUC).ResultsOf 257 citations, 28 publications were included. Random survival forests (N = 16, 57%) and neural networks (N = 11, 39%) were the most popular ML algorithms. There was variability across AUC for these ML models (median 0.789, range 0.6–0.950). ML algorithms were predominately considered for predicting overall survival in oncology (N = 12, 43%). ML survival models were often used to predict disease prognosis or clinical events (N = 27, 96%) in the oncology, while less were used for treatment outcomes (N = 1, 4%).ConclusionsThe ML algorithms, random survival forests and neural networks, are mainly used for RWD to predict survival outcomes such as disease prognosis or clinical events in the oncology. This review shows that more opportunities remain to apply these ML algorithms to inform treatment decision-making in clinical practice. More methodological work is also needed to ensure the utility and applicability of ML models in survival outcomes.

The purpose of this analysis is to assess the use of machine learning (ML) algorithms in the prediction of postoperative outcomes, including complications, recurrence, and death in transsphenoidal surgery. Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, we systematically reviewed all papers that used at least one ML algorithm to predict outcomes after transsphenoidal surgery. We searched Scopus, PubMed, and Web of Science databases for studies published prior to May 12, 2021. We identified 13 studies enrolling 5,048 patients. We extracted the general characteristics of each study; the sensitivity, specificity, area under the curve (AUC) of the ML models developed as well as the features identified as important by the ML models. We identified 12 studies with 5,048 patients that included ML algorithms for adenomas, three with 1807 patients specifically for acromegaly, and five with 2105 patients specifically for Cushing's disease. Nearly all were single-institution studies. The studies used a heterogeneous mix of ML algorithms and features to build predictive models. All papers reported an AUC greater than 0.7, which indicates clinical utility. ML algorithms have the potential to predict postoperative outcomes of transsphenoidal surgery and can improve patient care. Ensemble algorithms and neural networks were often top performers when compared with other ML algorithms. Biochemical and preoperative features were most likely to be selected as important by ML models. Inexplicability remains a challenge, but algorithms such as local interpretable model–agnostic explanation or Shapley value can increase explainability of ML algorithms. Our analysis shows that ML algorithms have the potential to greatly assist surgeons in clinical decision making.

Aim: The majority of machine learning (ML) models in healthcare are built on retrospective data, much of which is collected without explicit patient consent for use in artificial intelligence (AI) and ML applications. The primary aim of this study was to evaluate whether clinicians and scientific researchers themselves consent to provide their own data for the training of ML models. Materials and Methods: This survey was conducted through an anonymous online survey, utilizing platforms such as Telegram, LinkedIn, and Viber. The target audience comprised specific international groups, primarily Russian, German, and English-speaking, of clinicians and scientific researchers. These participants ranged in their levels of expertise and experience, from beginners to veterans. The survey centered on a singular, pivotal question: “Do You Consent to the Use of Your Biological and Private Data for Training Machine Learning and AI Models?” Respondents had the option to choose from three responses: “Yes” and “No”. Results: The survey was conducted in January 2024. A total of 119 unique and verified individuals participated in the survey. The results revealed that only 50% of respondents (63 persons) expressed consent to provide their own data for the training of ML and AI models. Conclusion: In the development of ML and AI models, particularly open-source ones, it is crucial to ascertain whether participants are willing to provide their private data. While ML algorithms can transform the nature of data, it is important to remember that the primary owner of this data is the individual. Our findings show that in 50% of the cases, even participants from scientific research and clinical backgrounds – individuals typically accountable for ensuring data quality in AI and ML model development – do not consent to the use of their data in AI and ML settings. This highlights the need for more stringent consent processes and ethical considerations in the utilization of personal data in AI and ML research.

12074 Background: Skeletal-related events (SREs) are detrimental clinical events in bone metastasis from advanced cancer, defined by pathologic fracture, spinal cord compression, and inevitable surgical or radiational intervention to the bone. Given their negative impact on quality of life and prognosis and interpatient heterogeneity in the SRE risk, accurate identification of patients with high SRE risk is critical. Methods: The patient-level data from three randomized clinical trials that administered zoledronic acid (ZA) to patients with bone-metastatic breast cancer, castration-resistant prostate cancer (CRPC), and other types of cancer were analyzed. (N = 460, 452, and 315, respectively) Machine learning (ML) models to predict SREs within 18 months (breast cancer), 12 months (CRPC), and 9 months (other cancers) were developed based on more than 40 baseline clinical and laboratory data. Seven ML algorithms and five feature selection methods were utilized to develop multiple models. The ML model with the best performance was identified based on the F1 score and the area under the receiver operating characteristic curve (AUC-ROC) for each cancer type and interrogated for important features with Shapley additive explanations. Lastly, the ML models’ ability to stratify patients by the cumulative SRE risk was evaluated by calculating hazard ratio (HR) with Cox-proportional hazards models. Results: Among the multiple ML models developed with different algorithms and feature selection methods, the model developed utilizing the random forests algorithm and the Boruta method for selecting features demonstrated the best performance in all types of cancer (F1 0.70, 0.67, and 0.67, and AUC-ROC 0.72, 0.68, and 0.73 for breast cancer, CRPC, and other cancers, respectively). In the ML model for breast cancer, performance status (PS), history of SRE, serum alkaline phosphatase (ALP), history of anti-neoplastic surgery, radiation therapy, and pathologic fracture were included as important features. Serum ALP, albumin, sodium, Gleason scores, and geographic regions were shown to be relevant in the CRPC model. For other cancers, serum ALP, albumin, total protein, phosphorus, red blood cell count, white blood cell count, visceral metastases, and history of arthritis were incorporated in the ML model. The ML model prediction successfully stratified the patients for cumulative SRE risk in all three cohorts. (HR with 95% confidence interval: 2.43 [1.86 – 3.18], 1.92 [1.51 – 2.45], and 3.06 [2.29 – 4.09] for breast cancer, CRPC, and other types of cancer, respectively). Conclusions: ML models incorporating baseline clinical and laboratory data can identify patients with bone metastasis on ZA harboring a high SRE risk.

Propofol is a widely used sedative-hypnotic agent for critically-ill patients requiring invasive mechanical ventilation (IMV). Despite its clinical benefits, propofol is associated with increased risks of hypertriglyceridemia. Early identification of patients at risk for propofol-associated hypertriglyceridemia is crucial for optimizing sedation strategies and preventing adverse outcomes. Machine learning (ML) models offer a promising approach for predicting individualized patient risks of propofol-associated hypertriglyceridemia. We propose the development of a ML model aimed at predicting the risk of propofol-associated hypertriglyceridemia in ICU patients receiving IMV. The study will utilize retrospective data from four Mayo Clinic sites. Nested cross-validation (CV) will be employed, with a 10-fold inner CV loop for model tuning and selection as well as an outer loop using leave-one-site-out CV for external validation. Feature selection will be conducted using Boruta and LASSO-penalized logistic regression. Data preprocessing steps include missing data imputation, feature scaling, and dimensionality reduction techniques. Six ML algorithms will be tuned and evaluated. Bayesian optimization will be used for hyperparameter selection. Global model explainability will be assessed using permutation importance, and local model explainability will be assessed using SHapley Additive exPlanations (SHAP). The proposed ML model aims to provide a reliable and interpretable tool for clinicians to predict the risk of propofol-associated hypertriglyceridemia in ICU patients. The final model will be deployed in a web-based clinical risk calculator. The model development process and performance measures obtained during nested cross-validation will be described in a study publication to be disseminated in a peer-reviewed journal. The proposed study has received ethics approval from the Mayo Clinic Institutional Review Board (IRB #23-007416). Robust external validation using a nested cross-validation (CV) framework will help assess the generalizability of models produced from the modeling pipeline across different hospital settings.A diverse set of machine learning (ML) algorithms and advanced hyperparameter tuning techniques will be employed to identify the most optimal model configuration.Integration of feature explainability will enhance the clinical applicability of the ML models by providing transparency in predictions, which can improve clinician trust and encourage adoption.Reliance on retrospective data may introduce biases due to inconsistent or erroneous data collection, and the computational intensity of the validation approach may limit replication and future model expansion in resource-constrained settings.

Summary A meticulous interpretation of steady-state or unsteady-state relative permeability (Kr) experimental data is required to determine a complete set of Kr curves. In this work, different machine learning (ML) models were developed to assist in a faster estimation of these curves from steady-state drainage coreflooding experimental runs. These ML algorithms include gradient boosting (GB), random forest (RF), extreme gradient boosting (XGB), and deep neural network (DNN) with a main focus on and comparison of the two latter algorithms (XGB and DNN). Based on existing mathematical models, a leading-edge framework was developed where a large database of Kr and capillary pressure (Pc) curves were generated. This database was used to perform thousands of coreflood simulation runs representing oil-water drainage steady-state experiments. The results obtained from these simulation runs, mainly pressure drop along with other conventional core analysis data, were used to estimate analytical Kr curves based on Darcy’s law. These analytically estimated Kr curves along with the previously generated Pc curves were fed as features into the ML model. The entire data set was split into 80% for training and 20% for testing. The k-fold cross-validation technique was applied to increase the model’s accuracy by splitting 80% of the training data into 10 folds. In this manner, for each of the 10 experiments, nine folds were used for training and the remaining fold was used for model validation. Once the model was trained and validated, it was subjected to blind testing on the remaining 20% of the data set. The ML model learns to capture fluid flow behavior inside the core from the training data set. In terms of applicability of these ML models, two sets of experimental data were needed as input; the first was the analytically estimated Kr curves from the steady-state drainage coreflooding experiments, while the other was the Pc curves estimated from centrifuge or mercury injection capillary pressure (MICP) measurements. The trained/tested model was then able to estimate Kr curves based on the experimental results fed as input. Furthermore, to test the performance of the ML model when only one set of experimental data is available to an end user, a recurrent neural network (RNN) algorithm was trained/tested to predict Kr curves in the absence of Pc curves as an input. The performance of the three developed models (XGB, DNN, and RNN) was assessed using the values of the coefficient of determination (R2) along with the loss calculated during training/validation of the model. The respective crossplots along with comparisons of ground truth vs. artificial intelligence (AI)-predicted curves indicated that the model is capable of making accurate predictions with an error percentage between 0.2% and 0.6% on history-matching experimental data for all three tested ML techniques. This implies that the AI-based model exhibits better efficiency and reliability in determining Kr curves when compared to conventional methods. The developed ML models by no means replace the need to conduct drainage coreflooding or centrifuge experiments but act as an alternative to existing commercial platforms that are used to interpret experimental data to predict Kr curves. The two main advantages of the developed ML models are their capability of predicting Kr curves within a matter of a few minutes as well as with limited intervention from the end user. The results also include a comparison between classical ML approaches, shallow neural networks, and DNNs in terms of accuracy in predicting the final Kr curves. The research presented here is an extension of the state-of-the-art framework proposed by Mathew et al. (2021). However, the two main aspects of the current study are the application of deep learning for the prediction of Kr curves and the application of feature engineering. The latter not only reduces the training/testing time for the ML models but also enables the end user to obtain the final predictions with the least set of experimental data. The various models discussed in this research work currently focus on the prediction of Kr curves for drainage steady-state experiments; however, the work can be extended to capture the imbibition cycle as well.

Abstract. As air pollution is regarded as the single largest environmental health risk in Europe it is important that communication to the public is up to date and accurate and provides means to avoid exposure to high air pollution levels. Long- and short-term exposure to outdoor air pollution is associated with increased risks of mortality and morbidity. Up-to-date information on present and coming days' air quality helps people avoid exposure during episodes with high levels of air pollution. Air quality forecasts can be based on deterministic dispersion modelling, but to be accurate this requires detailed information on future emissions, meteorological conditions and process-oriented dispersion modelling. In this paper, we apply different machine learning (ML) algorithms – random forest (RF), extreme gradient boosting (XGB), and long short-term memory (LSTM) – to improve 1, 2, and 3 d deterministic forecasts of PM10, NOx, and O3 at different sites in Greater Stockholm, Sweden. It is shown that the deterministic forecasts can be significantly improved using the ML models but that the degree of improvement of the deterministic forecasts depends more on pollutant and site than on what ML algorithm is applied. Also, four feature importance methods, namely the mean decrease in impurity (MDI) method, permutation method, gradient-based method, and Shapley additive explanations (SHAP) method, are utilized to identify significant features that are common and robust across all models and methods for a pollutant. Deterministic forecasts of PM10 are improved by the ML models through the input of lagged measurements and Julian day partly reflecting seasonal variations not properly parameterized in the deterministic forecasts. A systematic discrepancy by the deterministic forecasts in the diurnal cycle of NOx is removed by the ML models considering lagged measurements and calendar data like hour and weekday, reflecting the influence of local traffic emissions. For O3 at the urban background site, the local photochemistry is not properly accounted for by the relatively coarse Copernicus Atmosphere Monitoring Service ensemble model (CAMS) used here for forecasting O3 but is compensated for using the ML models by taking lagged measurements into account. Through multiple repetitions of the training process, the resulting ML models achieved improvements for all sites and pollutants. For NOx at street canyon sites, mean squared error (MSE) decreased by up to 60 %, and seven metrics, such as R2 and mean absolute percentage error (MAPE), exhibited consistent results. The prediction of PM10 is improved significantly at the urban background site, whereas the ML models at street sites have difficulty capturing more information. The prediction accuracy of O3 also modestly increased, with differences between metrics. Further work is needed to reduce deviations between model results and measurements for short periods with relatively high concentrations (peaks) at the street canyon sites. Such peaks can be due to a combination of non-typical emissions and unfavourable meteorological conditions, which are rather difficult to forecast. Furthermore, we show that general models trained using data from selected street sites can improve the deterministic forecasts of NOx at the station not involved in model training. For PM10 this was only possible using more complex LSTM models. An important aspect to consider when choosing ML algorithms is the computational requirements for training the models in the deployment of the system. Tree-based models (RF and XGB) require fewer computational resources and yield comparable performance in comparison to LSTM. Therefore, tree-based models are now implemented operationally in the forecasts of air pollution and health risks in Stockholm. Nevertheless, there is big potential to develop generic models using advanced ML to take into account not only local temporal variation but also spatial variation at different stations.

Satellite-based aerosol optical property retrieval over land, especially size-related parameters, is challenging. This study proposed a novel two-stage machine learning (ML) algorithm for retrieving aerosol optical depth (AOD), Ångström exponent (AE), fine mode fraction (FMF), and fine mode AOD (FAOD)) over land using MODIS observed reflectance. The new ML algorithm consists of three steps: (1) first, all samples extracted from AERONET measurements were used to train the ML model, (2) then, to reduce the extreme estimation bias of the model, divided low-value and high-value samples were used to train low-value and high-value ML models, respectively, and (3) finally, the three ML models were integrated into the final retrieval based on the weight interpolation. Independent site network validation results show that the new ML algorithm has a Pearson correlation coefficient (R) of 0.894 (0.638, 0.661, 0.865) and root mean square error (RMSE) of 0.146 (0.258, 0.245, 0.153) for the AOD (AE, FMF, FAOD) retrieval, which significantly outperforms the validation metrics of MODIS operational products, with AOD (AE, FMF, FAOD) RMSE of 0.130-0.156 (0.536-0.569, 0.313, 0.191). The inter-comparison of aerosol products shows that the spatial patterns of AOD, AE, FMF, and FAOD of the new ML algorithm are in good agreement with those of the MODIS and POLDER products. These results illustrate that the new ML algorithm has good performance and transferability and indicate the ability of ML methods to be applied to multispectral instruments (such as MODIS) to retrieve multiple aerosol properties.

The integration of machine learning (ML) algorithms into audit processes represents a significant advancement in the field of auditing, offering substantial benefits in terms of efficiency, accuracy, and risk management. This review examines the transformative potential of ML in auditing, highlighting its key benefits and the challenges that must be addressed to fully leverage its capabilities. Machine learning algorithms, with their ability to analyze large datasets and identify patterns, enhance the accuracy and thoroughness of audits. Traditional auditing methods often rely on sampling and manual checks, which can miss anomalies and fraudulent activities. In contrast, ML algorithms can process entire datasets, uncovering subtle patterns and irregularities that may indicate fraud or errors. This comprehensive analysis reduces the risk of oversight and improves the reliability of audit findings. One of the primary benefits of ML in auditing is its capacity for anomaly detection. ML models can be trained on historical data to understand normal financial behavior and flag deviations that might signify irregularities. This ability to detect anomalies in real-time enables auditors to identify potential issues promptly, reducing the time lag between occurrence and detection of fraud. Predictive analytics, powered by ML, further enhances audit processes by forecasting future risks based on historical data. This proactive approach allows auditors to anticipate and mitigate risks before they materialize, contributing to more robust risk management strategies. Despite these advantages, integrating ML into audit processes presents several challenges. Ensuring data quality and integrity is crucial, as ML algorithms are only as good as the data they analyze. Poor-quality data can lead to inaccurate predictions and conclusions. Additionally, the "black box" nature of some ML algorithms can pose transparency issues, making it difficult for auditors to explain how specific conclusions were reached, which is critical for stakeholder trust and regulatory compliance. Another significant challenge is the potential for algorithmic bias. ML models can inadvertently perpetuate existing biases in the data, leading to unfair or skewed audit outcomes. Continuous monitoring and validation of ML algorithms are necessary to detect and mitigate such biases. In conclusion, while integrating machine learning algorithms into audit processes offers substantial benefits in terms of accuracy, efficiency, and risk management, it also necessitates careful attention to data quality, transparency, and bias mitigation. Addressing these challenges is essential to fully realize the potential of ML in enhancing audit practices. Keywords: Benefits, Challenges, Audit Processes, Algorithms, ML.

Shale caprocks, often organic-rich, play a significant role in hydrogen sequestration, but their wettability is typically altered from water-wet to H2-wet due to the organic matter, compromising their sealing performance. Silica nanofluids can restore water-wet conditions, which is vital for effective containment of H2 in geological formations. However, laboratory experiments to test the effects of nanomaterials on wettability and interfacial tension (IFT) are resource-intensive and time-consuming. To address this challenge, data-driven machine learning (ML) models offer a promising alternative, allowing for the prediction of key UHS parameters—such as advancing and receding contact angles without the need for extensive laboratory testing. We have applied multiple ML models, including gradient boosting, extreme gradient boosting (XGboost), Catboost, random forest, and extra trees to predict the wettability of organic rich shale samples treated with silica nanofluids. The ML models were trained on a comprehensive dataset generated through laboratory experiments conducted under a wide range of pressure (0.5 – 1600psi) and temperature (298-323 K) conditions, using brine (1 wt.% KCl + 2 wt.% NaCl) and varying silica nanofluid concentrations (0.05–1.0 wt.%). Advanced visualization techniques, including swarm maps, box plots, and heatmap plots, were utilized to analyze the experimental dataset thoroughly. To enhance the generalization capabilities of the ML models, we employed Bayesian optimization for hyperparameter tuning, along with k-fold cross-validation and grid-search optimization techniques. Both statistical and graphical analyses were performed to show the reliability and performance of the models. The results demonstrated that the implemented ML models, particularly the XGboost and Catboost, accurately predicted the wettability behavior under various operating conditions. The training and testing average R² scores were above 0.998 and 0.949, respectively, confirming the high accuracy of the predictions. These findings highlight the reliability of the ML algorithms in predicting the complex interaction between shale, brine, and H2. Further investigation into the feature importance revealed that nanomaterials had the greatest influence on the wettability of the ternary system. The silica nanofluid concentrations played a key role in modifying wettability, with varying impacts on the receding contact angles, emphasizing the effect of nanomaterial treatment. The model's predictions were consistent with experimental results, suggesting that geological conditions, including pressure and temperature, have a profound influence on rock mineral wettability, directly impacting H2 geo-storage capacity. This study is the first to employ data-driven ML models to predict critical UHS parameters in organic-rich shales treated with silica nanofluids. The ability of the ML models to predict UHS parameters across a wide range of conditions provides a valuable tool for optimizing UHS system designs, offering a more efficient and scalable approach compared to traditional experimental methods.

The introduction of various technologies in the context of Industry 4.0 allowed collecting monitoring data for various fields in manufacturing. Shop-floor and production data can be used for further analysis to extract knowledge. In this paper, an extensive evaluation of ten Machine Learning (ML) models for anomaly detection in manufacturing is conducted. The evaluation is conducted on multiple distinct ML algorithms, including conventional ML and a representative of Deep Neural Network (DNN) based algorithms. The ML models are trained on real production schedules to detect anomalous behavior in the overall system efficiency as well as violations in the delivery date of jobs. Multiple combinations of relevant features are tested during the training of the models. In essence, the objective of the ML models is to detect anomalous unknown breakdowns in the machines that lead to disruption in the overall performance of the system. The evaluation of the ML models is conducted on independent datasets with artificially injected machine breakdowns to establish the ground truth. These schedules with machine breakdowns are obtained through a simulation model. The results point to the high performance of a conventional ML algorithm, KNN. The performance demonstrated by a DNN-based AutoEncoder, conventional Local Outlier Factor-based Feature Bagging, and a recent Copula-Based Outlier Detection (COPOD) algorithms suggest limited applicability, which strongly depends on the shape of the data.

The ongoing Russia–Ukraine conflict has exacerbated the global crisis of natural gas supply, particularly in Europe. During the winter season, major importers of liquefied natural gas (LNG), such as South Korea and Japan, were directly affected by fluctuating spot LNG prices. This study aimed to use machine learning (ML) to predict the Japan Korea Marker (JKM), a spot LNG price index, to reduce price fluctuation risks for LNG importers such as the Korean Gas Corporation (KOGAS). Hence, price prediction models were developed based on long short-term memory (LSTM), artificial neural network (ANN), and support vector machine (SVM) algorithms, which were used for time series data prediction. Eighty-seven variables were collected for JKM prediction, of which eight were selected for modeling. Four scenarios (scenarios A, B, C, and D) were devised and tested to analyze the effect of each variable on the performance of the models. Among the eight variables, JKM, national balancing point (NBP), and Brent price indexes demonstrated the largest effects on the performance of the ML models. In contrast, the variable of LNG import volume in China had the least effect. The LSTM model showed a mean absolute error (MAE) of 0.195, making it the best-performing algorithm. However, the LSTM model demonstrated a decreased in performance of at least 57% during the COVID-19 period, which raises concerns regarding the reliability of the test results obtained during that time. The study compared the ML models’ prediction performances with those of the traditional statistical model, autoregressive integrated moving averages (ARIMA), to verify their effectiveness. The comparison results showed that the LSTM model’s performance deviated by an MAE of 15–22%, which can be attributed to the constraints of the small dataset size and conceptual structural differences between the ML and ARIMA models. However, if a sufficiently large dataset can be secured for training, the ML model is expected to perform better than the ARIMA. Additionally, separate tests were conducted to predict the trends of JKM fluctuations and comprehensively validate the practicality of the ML models. Based on the test results, LSTM model, identified as the optimal ML algorithm, achieved a performance of 53% during the regular period and 57% d during the abnormal period (i.e., COVID-19). Subject matter experts agreed that the performance of the ML models could be improved through additional studies, ultimately reducing the risk of price fluctuations when purchasing spot LNG.

Machine learning (ML) algorithms are increasingly used to predict outcomes in orthopaedic surgery, but their utility in hip arthroscopy remains unclear. This study aimed to (1) evaluate ML models for predicting outcomes, complications, and resource use following hip arthroscopy, (2) compare ML performance to traditional statistical methods, and (3) critically appraise the quality of existing literature. A systematic search of PUBMED, MEDLINE, EMBASE and the Cochrane Central Register of Controlled Trials was conducted on 4 April 2023. Included studies used ML models for clinical prediction in hip arthroscopy. Data on study design, outcomes, model development, validation and adherence to TRIPOD guidelines were extracted. Seventeen studies involving 37,549 patients (52.8% female; mean age 34.4 ± 6.1 years) were included. ML was used to predict clinical outcomes (47.1%), adverse events (47.1%) and resource utilisation (5.9%). The median area under the curve was 0.66 (range 0.5-0.94) for clinical outcomes and 0.7 (range 0.6-0.9) for adverse events. Resource utilisation was reported with a root-mean-square error of $3800, a logarithmic error of 0.2, and R² of 0.8. Only four studies compared ML to traditional regression; two found no difference, while two favoured ML. On average, studies met 12.3 of the 22 TRIPOD criteria, with only 29.4% meeting more than two-thirds. ML models in hip arthroscopy show variable performance in predicting outcomes and complications. Furthermore, most studies comparing ML models to traditional regression did not report any significant difference. Lastly, variability in adherence to TRIPOD guidelines highlights the need for future studies to improve transparency and reporting in the development of ML algorithms for hip arthroscopy. Given the potential of ML models in enhancing clinical decision-making for hip arthroscopy, along with the findings of the current study, their application should be used with caution. Level IV, systematic review of level II-IV studies.

This study highlights drought forecasting for understanding the semi-arid area in India, where drought phenomena play vital role in the irrigation, drinking water supplies, and sustaining the ecological with economic balance for every nation. Therefore, drought forecasting is important for the future drought planning based on the machine learning (ML) models. Hence, The Standardized Precipitation Index (SPI) at 3- and 6-month periods have been selected and used for future drought forecasting scenarios in area. The combinations of ten inputs SPI-1- and SPI-10 were used for predicting modeling for SPI-3 and SPI-6 timescales, that modeling developed based on the historical SPI datasets from 1989 to 2019 years. The SPI-3 and SPI-6 maximum and minimum values are shown SPI-3 (2.03 and -5.522) and SPI-6 (1.94 and -6.93). The SPI is a popular method for estimating the drought analysis and has been used everywhere at global level. The developed models have been compared with each other, with the best combination of input variables selected using subset regression models and sensitivity studies. After that, the active input parameters were used for forecasting of SPI-3 and SPI-6 values to understanding of drought in semi-arid area. The finest input variables combination have been used in the Ml models and established the novel five models such as robust linear regression, bagged trees, boosted trees, support vector regression (SVM-Linear), and Matern Gaussian Process Regression (Matern GPR) models. Such kind of models first time has been applied for the forecasting of future drought conditions. Whole models were fine and improved modeling by using hyperparameters tuning, bagging, and boosting models. Entire ML models’ accuracy was compared using different statistical metrics. Compared with five ML models accuracy, we have found that the Matern GPR model better accuracy than other ML models. The best model accuracy is R2 = 0.95 and 0.93, RMSE, MSE, MAE, MARE, and NSE values, respectively, for predicting SPI-3 and SPI-6 values in the area. Therefore, the Matern GPR model was identified as the finest ML algorithm for predicting SPI-3 and SPI-6 associated with other algorithms. This research demonstrates the Matern GPR model's efficacy in predicting multiscale SPI-3 and SPI-6 under climate variations. It can be helpful in soil and water resource conservation planning and management and understanding droughts in the entire basin areas of the country India.