Chapter 9 - Electrical

Guest Editorial: Situational awareness of integrated energy systems

Electrical power engineering education as career is continuously declining from last two decades all over the world. Utilities managers, electric equipment manufacturers, power professionals and electric engineering educationists are predicting an impending crisis of acute shortage of electrical engineers. Underground trend towards solid state electronics, telecommunication and biomedical engineering is manifestation of imminent predicament of electrical power professionals for operating and developing tomorrow's electric power industries. This article discusses the compelling reasons behind the continued decline in power engineering education and suggest potential strategies to attract enrolment to this profession as career. Surely, career is bright but leaders have no lantern to guide power engineers to sun way lagoon.

Naval Engineers JournalVolume 85, Issue 1 p. 43-49 THE NAVAL SHIP RESEARCH AND DEVELOPMENT CENTER ADVANCED STRUCTURE FACILITYxs LOUIS A. BECKER, LOUIS A. BECKER Louis A. Becker was born in New Rochelle, N.Y., in 1930, receiving his earlier education in the New Rochelle Public Schools. He completed his undergraduate studies at Manhattan College in 1952, receiving his BCE degree, during which time he was also engaged in land surveying. Following this he did postgraduate study at Virginia Polytechnic Institute, obtaining his MS in 1954. He joined Naval Ship Research and Development Center in 1953 as a Junior Engineer, and is currently the Head of the Engineering & Facilities Division, Structures Department. His field of specialization is Structural Research and Development.Search for more papers by this authorFRANKLIN I. SIEGRIST, FRANKLIN I. SIEGRIST Franklin I. Siegrist was born in Knoxville, Tenn., in 1937, receiving his earlier education in the Public Schools of Erie, Pa. He attended Pennsylvania State University, graduating in 1962 with a Bachelor of Science degree in Electrical Engineering, having prior to that time served four years in the U. S. Navy. He was a Junior Engineer in the AC Spark Plug Division of General Motors from 1962 until 1964, at which time he came to the David Taylor Model Basin as an Electrical Engineer in the Industrial Department. He is currently Supervisory Engineer for Electrical and Electronics Engineering, Structures Department, Naval Ship Research and Development Center. His field of specialization is Electrical Engineering, Control Systems, Data Collection Systems, Computer Applications to Structural Research, and Hydraulic System Design. In the last of these he holds Patent Rights on a “Hydraulic Supercharge and Cooling Circuit” granted in 1970.Search for more papers by this author LOUIS A. BECKER, LOUIS A. BECKER Louis A. Becker was born in New Rochelle, N.Y., in 1930, receiving his earlier education in the New Rochelle Public Schools. He completed his undergraduate studies at Manhattan College in 1952, receiving his BCE degree, during which time he was also engaged in land surveying. Following this he did postgraduate study at Virginia Polytechnic Institute, obtaining his MS in 1954. He joined Naval Ship Research and Development Center in 1953 as a Junior Engineer, and is currently the Head of the Engineering & Facilities Division, Structures Department. His field of specialization is Structural Research and Development.Search for more papers by this authorFRANKLIN I. SIEGRIST, FRANKLIN I. SIEGRIST Franklin I. Siegrist was born in Knoxville, Tenn., in 1937, receiving his earlier education in the Public Schools of Erie, Pa. He attended Pennsylvania State University, graduating in 1962 with a Bachelor of Science degree in Electrical Engineering, having prior to that time served four years in the U. S. Navy. He was a Junior Engineer in the AC Spark Plug Division of General Motors from 1962 until 1964, at which time he came to the David Taylor Model Basin as an Electrical Engineer in the Industrial Department. He is currently Supervisory Engineer for Electrical and Electronics Engineering, Structures Department, Naval Ship Research and Development Center. His field of specialization is Electrical Engineering, Control Systems, Data Collection Systems, Computer Applications to Structural Research, and Hydraulic System Design. In the last of these he holds Patent Rights on a “Hydraulic Supercharge and Cooling Circuit” granted in 1970.Search for more papers by this author First published: February 1973 https://doi.org/10.1111/j.1559-3584.1973.tb04777.x AboutPDF ToolsExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Volume85, Issue1February 1973Pages 43-49 RelatedInformation

It was a great pleasure to welcome all the participants from different countries to the 2021 6th International Symposium on Advances in Electrical, Electronics and Computer Engineering (ISAEECE 2021) in Nanjing, China during March 12-14, 2021. ISAEECE 2021 is to bring together innovative academics and industrial experts in the field of electrical, electronics and computer engineering to a common forum. The primary goal of the conference is to promote research and developmental activities in electrical, electronics and computer engineering and another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working all around the world. The conference will be held every year to make it an ideal platform for people to share views and experiences in electrical, electronics and computer engineering and related areas.The conference model was divided into two sessions, including oral presentations and keynote speeches. In the first part, some scholars, whose submissions were selected as the excellent papers, were given 15 minutes to perform their oral presentations one by one. Then in the second part, keynote speakers were each allocated 30-45 minutes to hold their speeches. In this conference, we were greatly honor to have invited four outstanding researchers to serve as our Conference Chairman.During the conference, we invited three industry elites to present their insightful speeches. The first keynote speaker, Dr. Sunil Kumar Jha, from Nanjing University of Information Science and Technology, China. He presented a speech: Data Fusion Approaches in Human Body Odor Data Mining. The objective of the present research talk is to introduce audience about the data fusion and human body odor and to demonstrate research results related to search for an optimal subset of VOCs in body odor, which can produce differentiation in an individual by using the combination of analytical methods and chemometric analysis. The second keynote speaker, Prof. Chunbo Xiu, from Tiangong University, China. He shared a speech on his specialty related to Memristive Cellular Neural Network & Its Dynamic Characteristic Analysis. He demonstrated that chaotic memristive CNN system can be used in the secure communication by the chaos synchronization based on sliding mode control. Assoc. Prof. Pavel Loskot, from Zhejiang University-University of Illinois at Urbana-Champaign Institute (ZJUI), our third keynote speakers. He presented a speech: Monte Carlo Simulations Revisited. Their insightful speeches made every participant praised this conference for disseminating useful knowledge.We were glad to share with you that we received lots of submissions from the conference and we selected a bunch of high-quality papers and compiled them into the proceedings after rigorously reviewed them. These papers feature following topics but are not limited to: Electronics Engineering, Electrical Engineering, Computer Engineering and other related topics. All the papers have been through rigorous review and process to meet the requirements of International publication standard.We were grateful to the International/National advisory committee, keynote speakers, session chairs, organising committee members, student volunteers and administrative assistance of the management section of University, including accounts section, digital media and publication house. Also, we were thankful to all the authors for contributing large number of papers in the conference, because of which the conference became a story of success. It was the quality of their presentations and their passion to communicate with the other participants that really make this conference series a great success.The Organizing Committee of ISAEECE 2021List of Committee member are available in this pdf.

Guest Editorial

International Journal of Computational Engineering ScienceVol. 05, No. 01, pp. 81-89 (2004) No AccessEVOLUTIONARY PROGRAMMING BASED ECONOMIC DISPATCH WITH LINE FLOW CONSTRAINTSP. SOMASUNDARAM, K. KUPPUSAMY, and R. P. KUMUDINI DEVIP. SOMASUNDARAMSchool of Electrical and Electronics Engineering, Anna University, Chennai, Tamil Nadu 600 025, India Search for more papers by this author , K. KUPPUSAMYSchool of Electrical and Electronics Engineering, Anna University, Chennai, Tamil Nadu 600 025, India Search for more papers by this author , and R. P. KUMUDINI DEVISchool of Electrical and Electronics Engineering, Anna University, Chennai, Tamil Nadu 600 025, India Search for more papers by this author https://doi.org/10.1142/S1465876304002277Cited by:1 PreviousNext AboutSectionsPDF/EPUB ToolsAdd to favoritesDownload CitationsTrack CitationsRecommend to Library ShareShare onFacebookTwitterLinked InRedditEmail AbstractThis paper presents an efficient, simple and new method for solving Economic Dispatch (ED) problem with line flow constraints through the application of Evolutionary Programming (EP). The controllable system quantities in the base-case state are optimized to minimize some defined objective function subject to the base-case operating constraints. A 10-bus system is taken for investigation. The ED results obtained using EP are compared with those obtained using quadratic programming. The investigations reveal that the proposed algorithm is relatively simple, reliable, efficient and suitable for on-line applications.Keywords:Power System OptimizationEconomic DispatchEvolutionary ProgrammingLine Flow Constraints References B. H. Chowdhury and S. Rahman, IEEE Transaction on power systems 5(4), 1248 (1990). Crossref, Google Scholar Nanda, L. Hari and M. L. Kothari, IEE Proceedings-C 141(1), 1 (1994). Google ScholarJ. Nandaet al., IEE Proceedings-C 139(1), 39 (1992). Google ScholarJ. Y. Fan and L. Zhang, IEEE Transactions on Power Systems 13(2), 320 (1998). Crossref, Google ScholarP. K. Hota, R. Chakrabarti and P. K. Chattopadhyay, Institute of Engineers (India) Journal-EL 81, 21 (2000). Google ScholarJ. Nanda and R. Badri Narayanan, Electrical Power and Energy Systems 24, 723 (2002). Crossref, Google Scholar D. B. Fogel , Evoluationary Computation: Toward a New Philosophy of Machine Intelligence ( IEEE Press , USA , 1995 ) . Google ScholarL. L. Lai and J. T. Ma, IEEE Transactions on Power Systems 12(1), 198 (1997). Crossref, Google ScholarH. T. Yang, P. C. Yang and C. L. Huang, IEEE Transactions on Power Systems 11(1), 112 (1996). Crossref, Google ScholarK. P. Wong and J. Yuryevich, IEEE Transactions on Power Systems 13(2), 301 (1998). Google ScholarT. Jayabarathi, G. Sadasivam and V. Ramachandran, Electric Power Systems Research 52, 261 (1999). Crossref, Google ScholarT. Jayabarathi and G. Sadasivam, European Transaction on Electrical Power 10(3), 167 (2000). Crossref, Google ScholarP. Attaviriyanupapet al., IEEE Transactions on Power Systems 17(2), 411 (2002). Crossref, Google Scholar FiguresReferencesRelatedDetailsCited By 1FDR PSO-based Transient Stability Constrained Optimal Power Flow Solution for Deregulated Power IndustryM. Anitha, S. Subramanian and R. Gnanadass28 Aug 2007 | Electric Power Components and Systems, Vol. 35, No. 11 Recommended Vol. 05, No. 01 Metrics History KeywordsPower System OptimizationEconomic DispatchEvolutionary ProgrammingLine Flow ConstraintsPDF download

Welcome to the special issue on selected papers from the ELECO-2013 Conference!, the 8th International Conference on Electrical and Electronics Engineering, held 28–30 November 2013, in Bursa-Turkey. ELECO conferences go back to 1986, when it was initially organized as national ELMEKSEM Electromechanical Conference by the Chamber of Electrical Engineers (EMO) Bursa Branch and upon that success repeated in 1988 and 1993 and 1997. The Bursa Branch has further gone on to organize a series of Electrical and Electronics Engineering Conferences in Bursa. ELECO conferences are organized at international level in odd numbered years and as national conferences in even numbered years, such as ELECO’2013 is the eight international conference which participants coming from various countries, presenting papers from the wide spectrum of electrical and electronics engineering. ELECO 2013 is jointly organized by Uludag University, Bursa; Istanbul Technical University (ITU), Istanbul and the Chamber of Turkish Electrical Engineers (EMO) Bursa Branch. The IEEE Region 8, IEEE Circuits and Systems (CAS) Turkey section and The Scientific and Technological Research Council of Turkey are co-sponsors of ELECO 2013. Taking the broad scope of the technical program, it is probably the largest electrical and electronics engineering conference ever held in Turkey. The scope of the conference covers topics ranging over electric power systems, electrical machines and drives, power electronics, high voltage techniques, electrical materials, electronics, circuits and systems, signal processing, electromagnetics, antennas and propagation, microwave theory, communication systems, mechatronics, control theory, control applications, automation systems, robotics and intelligent control systems. Two hundred and thirty five papers have been submitted for presentation and 138 papers have been accepted. If we look at the contributions with respect to geographical point of view, it is seen that ELECO 2013 contributions are coming from 17 different countries. Selected papers from previous international ELECO Conferences were invited to be published in extended form in special ELECO issues of international journals, under peer review. Three special ELECO issues appeared in the journal Analog Integrated Circuits and Signal Processing containing selected papers from ELECO’2001, ELECO’2007 and ELECO’2011. Furthermore, four special ELECO issues appeared in the journal TJEECS: Turkish Journal of Electrical Engineering and Computer Sciences where selected papers from ELECO’2003, ELECO’2005, ELECO’2007, and ELECO’2009 were published in extended form, respectively. This special issue on selected papers from ELECO’2013 contains extended versions of 12 papers presented at the conference, chosen among 19 recipients of the call for the papers for the special issue. All papers had to undergo the usual ALOG review process before they were finally accepted for this special issue. One of these papers is selected from invited talks given by world-known scientists during the conference. Six papers are selected from the papers presented in Special Session on Advances and New Design Possibilities for Analog Signal Processing. The other five are chosen from regular submitted manuscripts. H. H. Kuntman (&) S. Ozoguz O. Cicekoglu Istanbul Technical University, Istanbul, Turkey e-mail: kuntman@itu.edu.tr

Naval Engineers JournalVolume 76, Issue 4 p. 543-546 WHAT IS A VALUE SPECIALIST AND THE JOB HE DOES? A. CLYDE FLACKBERT, A. CLYDE FLACKBERT THE AUTHOR: A. CLYDE FLACKBERT served in the Naval Reserve as a Lt(jg) during World War II with duty at the Naval Research Laboratory, later joining the Office of Naval Research as a civilian. He is currently Manager of Engineering Operations for the Automatic Test Systems Laboratory of Hughes Aircraft Company, Culver City, California. Prior to this he was an engineering manager at the Aeronutronic Division of the Ford Motor Company, and a manager for a major program at the Airborne Instruments Laboratory Division of Cutler-Hammer. He received his Bachelor's degree in Electrical Engineering at Purdue University and continued with his studies at M.I.T. and Adelphi College. He is a Registered Professional Engineer, a Senior Member of the Institute of Electrical and Electronic Engineers, and a Member of the Operations Research Society of America.Search for more papers by this author A. CLYDE FLACKBERT, A. CLYDE FLACKBERT THE AUTHOR: A. CLYDE FLACKBERT served in the Naval Reserve as a Lt(jg) during World War II with duty at the Naval Research Laboratory, later joining the Office of Naval Research as a civilian. He is currently Manager of Engineering Operations for the Automatic Test Systems Laboratory of Hughes Aircraft Company, Culver City, California. Prior to this he was an engineering manager at the Aeronutronic Division of the Ford Motor Company, and a manager for a major program at the Airborne Instruments Laboratory Division of Cutler-Hammer. He received his Bachelor's degree in Electrical Engineering at Purdue University and continued with his studies at M.I.T. and Adelphi College. He is a Registered Professional Engineer, a Senior Member of the Institute of Electrical and Electronic Engineers, and a Member of the Operations Research Society of America.Search for more papers by this author First published: August 1964 https://doi.org/10.1111/j.1559-3584.1964.tb04473.x AboutPDF ToolsExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Volume76, Issue4August 1964Pages 543-546 RelatedInformation

Since 1999, the Bursa Branch of the Chamber of Electrical Engineers of Turkey, together with Uludag University and Istanbul Technical University, have organized an international conference (the 8th International Conference on Electrical and Electronics Engineering, ELECO) in Bursa, a historical city in Turkey where the Ottoman Empire was established. This year, on October 28?30, 2013, the ELECO conference hosted more than 200 engineers, academicians, and experts in electrical and electronics engineering. It was full of sessions and invited speakers on recent developments in electrical energy, smart-grid applications, electronic circuits, high-frequency micro chip circuits, and new technologies in computer science (Figure 1).

In 1974, Aalborg University (Denmark) introduced the project organised problem based learning concept. The experience since then has proven this to be an important innovation in higher education. This presentation focuses on the experiences from implementing this pedagogical concept in engineering education. The main part of the curriculum is engineering project work, which is discussed, including results from a recent evaluation of electrical and electronic engineering in Denmark. An international board evaluated all Danish engineering programs within Electronic and Electrical Engineering (five schools and two universities) and published their report in June 1998. This evaluation shows in very clear terms the superiority of project organised problem based learning compared to more traditional learning strategies.

Coupling Of Synthesis And Layout: Challenges And Solutions

Click to increase image sizeClick to decrease image size Additional informationNotes on contributorsM Jagadesh KumarM Jagadesh Kumar (SM'99) was born in Mamidala, Nalgonda District, Andhra Pradesh, India. He received the MS and PhD degrees in electrical engineering from the Indian Institute of Technology, Madras, India. From 1991 to 1994, he performed post-doctoral research in modeling and processing of high-speed bipolar transistors with the Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada. While with the University of Waterloo, he also did research on amorphous silicon TFTs. From July 1994 to December 1995, he was initially with the Department of Electronics and Electrical Communication Engineering, Indian Institute of Technology, Kharagpur, India, and then joined the Department of Electrical Engineering, Indian Institute of Technology, Delhi, India, where he became an Associate Professor in July 1997 and a Full Professor in January 2005. His research interests are in VLSI device modeling and simulation for nanoscale applications, integrated-circuit technology, and power semiconductor devices. He has published extensively in the above areas with more than 115 publications in refereed journals and conferences and has filed five patent applications. His teaching has often been rated as outstanding by the Faculty Appraisal Committee, IIT Delhi.Dr Kumar is a Fellow of Institution of Electronics and Telecommunication Engineers (IETE), India. He has been awarded the 29th IETE Ram Lal Wadhwa Gold Medal for distinguished contribution in the field of semi-conductor device design and modeling. He is an editor of IEEE Transactions on Electron Devices. He is also on the editorial board of (i) Recent Patents on Nanotechnology, (ii) Journal of Nanoscience and Nanotechnology and (iii) IETE Journal of Research as a subject area Honorary Editor for Electronic Devices and Components. He has reviewed extensively for different journals including IEEE Trans on Electron Devices, IEEE Trans on Device and Materials Reliability, IEE Proc on Circuits, Devices and Systems, Electronics Letters and Solid-state Electronics. He was Chairman, Fellowship Committee, The Sixteenth International Conference on VLSI Design, January 4–8, 2003, New Delhi, India. He was Chairman of the Technical Committee for High Frequency Devices, International Workshop on the Physics of Semiconductor Devices, December 13–17, 2005, New Delhi, India.

This study aims to determine the level of feasibility of practical facilities and equipment in the Private Vocational High School Electrical Engineering in the East Jakarta environment. The research method used is the Discrepancy Evaluation Model. The problems raised in this study are the extent of the feasibility of the space and equipment of the practice of electric power installation programs in Private Vocational High Schools in the East Jakarta region if examined from the National Standards for Vocational High School Facilities and Infrastructure in Indonesia. The research samples were 4 schools; determination Sample schools are conducted by proportional random sampling. The research was conducted in the 2017/2018 school year. The results showed that: (1) All (100%, N = 4) sample schools had a facility of electrical Power engineering installation the form of instructional space and practice space in conditions worthy. (2) All sample schools did not have a Basic Electrical Engineering laboratory. (3) When viewed from the standards of the Vocational High School practice equipment available in the basic installation practice room for Electric Power, in all sample schools were inadequate. Conclusion This study: shows that private Vocational High Schools in East Jakarta already have the facilities electrical practice is in the form of instructor rooms and practicum rooms, but it is not full supported by adequate practice equipment. The implication of this study is that private vocational schools in the East Jakarta environment need to meet the additional Electrical power plant installation equipment according the regulation Minister of Education and Culture Republic Indonesian number 34 of 2018 about National standard of vocational high school’s facilities.

It is an important and challenging task to develop concepts and skills of undergraduate engineering students in computer programming course and hence their evaluation on higher order skills. Already several methods are developed to evaluate the students of this course for various engineering programs, but a method for undergraduate electrical and electronic engineering (EEE) program was not found in the literature. In this paper, a simple evaluation method for the students of computer programming course of undergraduate EEE (BSc in EEE) program has been reported using result-oriented learning. Detail methodology, course syllabus design, course outcomes (COs) and mapping it with program outcomes (POs) of BSc in EEE, question setting following Bloom’s taxonomy, laboratory experiment, assessment plan, course and PO evaluation data and graphs have been presented along with relevant statistics. All data are presented for a cohort of students who took this course in summer 2019 Semester at EEE Department of Southeast University. It has been observed that the target set by the course teacher has been achieved by the students. Recommendations of the course teacher for further improvement of the COs’ achievement have also been presented. Keywords: CO evaluation, programming course, OBE

Repurposing Electricity Access Research for the Global South: A Tale of Many Disconnects