Characteristics of Wind Power Fluctuations

With the increasing integration of the wind power into the power system, wind farm are required to be controlled as a single unit and have all the same control tasks as conventional power plants. The wind farm central controller receives control orders from Transmission System Operator (TSO), then dispatch the wind power reference to each wind turbine. One of the most commonly used dispatch methods is to dispatch the wind power reference to each wind turbine proportional to each wind turbine's available wind power without the consideration of the wake effect. The wake which depends on the thrust efficient of upstream wind turbines in the wind farm influences the downstream wind speed which determines the available wind power of the downstream wind turbine. Optimize the wind power production of each wind turbine in the wind farm by the optimization of the pitch angle and tip-speed-ratio of each turbine can increase the total available wind power of the wind farm. This paper proposed a new dispatch method which dispatches the wind power reference to each wind turbine proportional to each wind turbine's optimal wind power to increase the available wind power of the whole wind farm. Particle Swarm Optimization (PSO) is used to obtain the optimal wind power for each wind turbine. A case study is carried out. The available wind power of the wind farm was compared between the traditional dispatch method and the proposed dispatch method with the consideration of the wake effect.

During recent years, wind energy has moved from an emerging technology to a nearly competitive technology. This fact, coupled with an increasing global focus on environmental concern and a political desire of a certain level of diversification in the energy supply, ensures wind energy an important role in the future electricity market. For this challenge to be met in a cost-efficient way, a substantial part of new wind turbine installations is foreseen to be erected in big onshore or offshore wind farms. This fact makes the production, loading and reliability of turbines operating under such conditions of particular interest.

Researching on interaction between wind farm and power system, it usually uses simple model to describe the wind farm. The wind turbines in a wind farm always suppose as a coherent generator group, every wind turbines have identical wind speed. As wind turbine locates in the different site in the wind farm, the wind speed at each wind turbines will not change simultaneously. Wake effect is another factor that should take into consideration. So, it needs to get wind speed equivalent model. The equivalent model of wind speed in the wind farm is based on output of power. Gust wind and ramp wind are discussed. Wind farm will change gust wind into step varying wind and make ramp wind into different type wind. The arrangement of wind turbines will also affect equivalent model of wind speed. The result show that the length of wind farm will smooth the power output. It explains why the power output fluctuation of wind farm is smaller than single wind turbine. The onshore wind farm located in Dongtai Jiangsu province is proposed as an example. The equivalent wind speed model and equivalent impedance connected to grid are calculated. The results illustrate the impact of wind speed model on wind farm output.

This study explores the smoothing effect on the uncertainty of the wind power fluctuations that affect a power system at points of common coupling. Set pair analysis is applied to evaluate the similarity between the power fluctuations of a single wind turbine and those of all aggregated wind turbines, based on which a quantitative index describing the wind power smoothing effect is proposed. The smoothing effect characteristics of a wind farm cluster are investigated for different numbers of wind turbines, different wind speeds, different seasons, and multiple sampling intervals. A significant smoothing effect is usually observed at a shorter sampling interval and a higher wind speed, and the smoothing effect index increases with an increase in the numbers of wind turbines and farms. Additionally, the correlation between the smoothing effect of aggregated wind farms and the forecast accuracy for the corresponding aggregated power output is examined. The experimental results indicate that the wind power forecast accuracy varies with the smoothing effect index, which is influenced by the number of wind farms. Furthermore, the aggregated output from a wind farm cluster with a higher smoothing effect index exhibits better forecasting performance than that from a single wind farm, showing that the trend of the wind power series becomes smoother due to the smoothing effect, thus enabling one-step-ahead wind power forecasting with higher accuracy.

Difference between grid connections of large-scale wind power and conventional synchronous generation

Hourly modeled wind turbine power output time series – modeled from outputs from the mesoscale numerical weather prediction system WRF – are used to examine the spatial smoothing of various wind farm portfolios located on a complex isolated island group with a surface area of 1400 km2. Power spectral densities (PSD), hourly step change functions, and duration curves are generated, and the 5th and 95th percentiles of the step change functions are calculated. The spatial smoothing is identified from smaller high frequency PSD values, less hourly fluctuations, and more flat duration curves per installed wind power capacity, compared to single wind turbine outputs. A discussion on the limitation of the spatial smoothing for the region is included, where a smoothing effect is clear for periods up to 1–2 days, although most evident at the higher frequencies. By maximizing the smoothing effect, optimal wind farm portfolios are presented with the intention to minimize the overall wind power fluctuations. The focus is mainly on the smoothing effect in highest resolvable frequencies. Optimizing wind farm capacities at fourteen pre-defined good wind farm site locations has a minimal improvement on the hourly fluctuations. However, choosing good combinations of the individual wind farm site locations decrease the 1–3 hourly fluctuations considerably; the optimized wind farm portfolios consist of distant wind farms, while poor portfolios consist of clustered wind farms. The 5th and 95th percentiles are 15 % less for an optimized portfolio with four wind farms compared to a poor combination of four wind farms.

This paper proposes a coordinated operational strategy of energy storage system (ESS) and wind farm to reduce wind power spillage and alleviate wind power fluctuation. Firstly, power curve of a wind farm, in the form of an equivalent wind turbine, is determined by least square fitting. Based on the power output characteristic of the wind farm and historic operating data, the statistical properties of wind power spillage and fluctuation can be obtained. Secondly, the target for wind farm and ESS power output is calculated. Power generation/absorption capabilities of ESS and available power output reducing range of the wind farm are quantified as well, considering the operational constraints of ESS and dispatched wind power output. Finally, a coordinated operational strategy is developed not only to adjust the combined ESS and wind farm to meet the dispatch requirement, but also to ensure ESS and the wind farm to satisfy operational constraints. Case studies are conducted on a practical wind farm with battery energy storage system installed, which demonstrate that the coordination of ESS can greatly boost the revenue and improve power quality of wind farm.

With increasing installation capacity and wind farms penetration, wind power plays more important role in power systems, and the modeling of wind farms has become an interesting research topic. In this paper, a coherency-based equivalent model has been discussed for the doubly fed induction generator (DFIG). Firstly, the dynamic models of wind turbines, DFIG and the mechanisms are briefly introduced. Some existing dynamic equivalent methods such as equivalent wind model, variable speed wind turbine model, parameter identification method and modal equivalent method to be used in wind farm aggregation are discussed. Then, considering wind power fluctuations, a new equivalent model of a wind farm equipped with doubly-fed induction generators is proposed to represent the interactions of the wind farm and grid. The method proposed is based on aggregating the coherent group wind turbines into an equivalent one. Finally, the effectiveness of the equivalent model is demonstrated by comparison with the wind farm response obtained from the detailed model. The dynamic simulations show that the present model can greatly reduce the computation time and model complexity.

Large scale wind power penetration has a significant impact on the reliability of the electric generation systems. A wind farm consists of a large number of wind turbine generators (WTGs). A major difficulty in modeling wind farms is that the WTG not have an independent capacity distribution due to the dependence of the individual turbine output on the same energy source, the wind. In this paper, a model of the wind farm output power considering multi-wake effects is established according to the probability distribution of the wind speed and the characteristic of the wind generator output power: based on the simple Jenson wake effect model, the wake effect with wind speed sheer model and the detail wake effect model with the detail shade areas of the upstream wind turbines are discussed respectively. Compared to the individual wake effect model, this model takes the wind farm as a whole and considers the multi-wakes effect on the same unit. As a result the loss of the velocity inside the wind farm is considered more exactly. Furthermore, considering the features of sequentially and self-correlation of wind speed, an auto-regressive and moving average (ARMA) model for wind speed is built up. Also the reliability model of wind farm is built when the output characteristics of wind power generation units, correlation of wind speeds among different wind farms, outage model of wind power generation units, wake effect of wind farm and air temperature are considered. Simulation results validate the effectiveness of the proposed models. These models can be used to research the reliability of power grid containing wind farms, wind farm capacity credit as well as the interconnection among wind farms

Reliability-based cost-benefit optimization formulations for wind turbines are presented. Some of the important aspects for stochastic modeling of loads, strengths and models uncertainties for wind turbines are described. Single wind turbines and wind turbines in wind farms with wake effects are discussed. Limit state equations are presented for fatigue limit states and for ultimate limit states with extreme wind load, and illustrated by bending failure. Illustrative examples are presented, and as a part of the results optimal reliability levels are obtained which corresponds to an annual reliability index equal to 3. An example with fatigue failure indicates that the reliability level is almost the same for single wind turbines and for wind turbines in wind farms if the wake effects are modeled equivalently in the design equation and in the limit state equation.1 INTRODUCTION

In large wind farms, the interaction of atmospheric turbulence and wind turbine wakes leads to complex vortex dynamics and energy dissipation, resulting in reduced wind velocity and subsequent loss of wind power. This study investigates the influence of vortex stretching on wind power fluctuations within wind turbine wakes using scale-adaptive large eddy simulation. The proper orthogonal decomposition method was employed to extract the most energetic contributions to the wind power spectra. Vertical profiles of mean wind speed, Reynolds stresses, and dispersive stresses were analyzed to assess energy dissipation rates. Our simulation results showed excellent agreement when compared with wind tunnel data and more advanced numerical models, such as the actuator line model and the actuator line model with hub and tower effects. This highlights the important role of coherent and energetic flow components in the spectral behavior of wind farms. The findings indicate a persistent energy cascading length scale in the wake of wind turbines, emphasizing the vertical transport of energy to turbine blades. These results complement existing literature and provide new insights into the dynamics of wind turbine wakes and their impact on wind farm performance.

The risk assessment of frequency deviation in power systems caused by the wind power fluctuations is an essential issue on wind power integration, thus a more realistic wind power fluctuation simulation is necessary. To construct wind power fluctuations, not only time scale but also wind direction should be considered for the wind speed model with spatial correlation in a wind farm. In this paper, wind direction is added to the wind speed model on the basis of the second level wind speed with spatial correlation. Based on the Von Mises distribution and the Weibull distribution, the correlation of wind speed and direction is analyzed, and the sequences are obtained according to Monte Carlo Sampling, describing the correlation between wind speed and wind direction clearly. Then the wind power fluctuations with spatial correlation is available. Therefore, the frequency deviation resulted from the uncertainty of wind power fluctuations can be evaluated more accurately.

Instability is one of shortcomings for wind power. Along with the increasing of the number of wind farms, power instability also increased. The fluctuation of wind power will cause the variation of voltage in access point .The impact of this fluctuation to power grid is more and more bigger. To reduce this impact, we should smooth and filter the output power. Therefore, a detailed analysis of the characteristics of output power is very necessary. This paper starts with the study of stationary principle. Then study second-time-scale output power. We find the power is non-stationary random signal sequence. This sequence does not have the concept of spectrum, so we choose wavelet analysis, which is commonly used in non-stationary random signal analysis, to do the time-frequency analysis of the output power. Keywords-output power of wind turbine, stationary test, wavelet analysis

Improvement of wind power utilization through flexible operation of data center in wind parks

The anti-peak shaving characteristics of wind power is an important factor that limits the consumption of wind power. The use of the space-time translation capability of a battery energy storage system is one of the effective means for promoting wind power consumption. Thus, this study proposes an energy storage system smoothing wind power fluctuation control strategy considering wind power consumption to improve the utilization level and economy of an energy storage system. First, the statistical characteristics of wind power are analyzed, and the scene division principle of a multiscenario regulation of an energy storage system is formulated using a correlation coefficient. On this basis, the charging and discharging intervals of the energy storage system in each scenario are determined by comprehensively considering the wind power and the time domain distribution law of load. Then, the control strategy of energy storage system based on inter-zone control is proposed based on the division of charging and discharging intervals. During the charging interval, smoothing the upward fluctuation of wind power or reducing the amount of abandoned wind power is aimed at storing electricity. During the discharge interval, electricity is released to smooth the downward fluctuation of wind power. Finally, considering the real-time state of charge and wind power consumption of the energy storage system, a method of charging and discharging power correction based on fuzzy control is proposed. Taking the actual data of a wind farm as an example, a test is performed on a simulation platform of a combined wind storage power generation system to verify the feasibility and superiority of the proposed control strategy.