CheckSim: A Reference-Based Identity Document Verification by Image Similarity Measure

In this paper, the Convolutional Neural Network (CNN) architecture, which is one of the deep learning architectures, is used to classify the basic circuit components drawn by hand. During the training and testing stages of the model, a new dataset containing images of 863 circuit components manually drawn by different people is created. The data set contains images of four different classes of circuit components such as resistor, inductor, capacitor and voltage source. All images have been fixed to the same size and converted to grayscale to increase recognition performance and reduce process complexity. In the study, training for four classes is performed with CNN architecture. Based on the CNN architecture, four new CNN models are employed with different the number of layers. The training and validation results of these models are compared separately, the model with the highest training and validation performance is observed with four layer CNN model (CNN-4). This model obtained 84.41% accuracy rate at classification task.

Bangla handwritten character recognition is a popular research topic as its difficulty is higher than the recognition of other languages because of multiple formats of compound characters. State of the art Convolutional neural network (CNN) architectures are very much useful in computer vision applications. Some works have been carried out in Bangla handwritten character recognition but most of them either not very efficient or they can not classify a lot of characters. In this work, state of art pre-trained CNN architectures is used to classify 231 different Bangla handwritten characters using CMATERdb dataset. The images were first converted to B&W form with white as the foreground color. The size of the images is reduced to 28 × 28 form. These images are used as input to the CNN architectures. The weights of the state-of-the-art CNN models are kept as it was. The training learning rate was set to 0.001 and categorical cross-entropy as the error function. After 50 epochs, InceptionResNetV2 achieved the best accuracy (96.99%). DenseNet121 and InceptionNetV3 also provided remarkable recognition accuracy (96.55 and 96.20%, respectively). We also considered combination of trained InceptionResNetV2, InceptionNetV3 and DenseNet121 architectures which provided better recognition accuracy (97.69%) than other single CNN architectures but it is not feasible for using as it requires a lot of computation power and memory. The models were tested in the cases where characters look confusing to humans, but all the architectures showed equal capability in recognizing these images. Considering computational complexity, memory and capability of recognizing confused characters, InceptionResNetV2 can be said as the best performing model.

Recognition of human activity based on convolutional neural network has received the interest of researchers in recent years due to its significant improvement in accuracy. A large number of algorithms based on the deep learning approach have been proposed for activity recognition purpose. However, with the increasing advancements in technologies having limited computational resources, it needs to design an efficient deep learning-based approaches with improved utilization of computational resources. This paper presents a simple and efficient 2-Dimensional convolutional neural network (2-D CNN) architecture with very small size convolutional kernel for human activity recognition. The merit of the proposed CNN architecture over standard deep learning architectures is fewer trainable parameters and lesser memory requirement which enables it to train the proposed CNN architecture on low GPU memory-based devices and also works well with smaller as well as larger size datasets. The proposed approach consists of mainly four stages: namely (1) creation of dataset and data augmentation, (2) designing 2-D convolutional neural network (CNN) architecture, (3) the proposed 2-D CNN architecture trained from scratch up to optimum stage, and (4) evaluation of the trained 2-D CNN architecture. To illustrate the effectiveness of the proposed architecture several extensive experiments are conducted on three publicly available datasets, namely IXMAS, YouTube, and UCF101 dataset. The results of the proposed method and its comparison with other state-of-the-art methods [8-12,14,18-26,29-33] demonstrate the usefulness of the proposed method.

In this paper, we study the performance of variants of well-known Convolutional Neural Network (CNN) architectures on different audio tasks. We show that tuning the Receptive Field (RF) of CNNs is crucial to their generalization. An insufficient RF limits the CNN's ability to fit the training data. In contrast, CNNs with an excessive RF tend to over-fit the training data and fail to generalize to unseen testing data. As state-of-the-art CNN architectures - in computer vision and other domains - tend to go deeper in terms of number of layers, their RF size increases and therefore they degrade in performance in several audio classification and tagging tasks. We study well-known CNN architectures and how their building blocks affect their receptive field. We propose several systematic approaches to control the RF of CNNs and systematically test the resulting architectures on different audio classification and tagging tasks and datasets. The experiments show that regularizing the RF of CNNs using our proposed approaches can drastically improve the generalization of models, out-performing complex architectures and pre-trained models on larger datasets. The proposed CNNs achieve state-of-the-art results in multiple tasks, from acoustic scene classification to emotion and theme detection in music to instrument recognition, as demonstrated by top ranks in several pertinent challenges (DCASE, MediaEval).

Every year, new Convolutional Neural Network (CNN) architectures appear to deal with different problems in the activity of image and video recognition. These architectures usually work along the ImageNet dataset for looking for the best performance of the CNNs without taking into account the video task where they are used. This can represent a problem if the task is Human Action Recognition (HAR) in video, since the CNN architectures are pre-trained with an image dataset that can practically contain any object, while HAR problem requires consecutive frames of people doing actions. To prove the idea that using CNNs pre-trained on an image dataset does not always achieve the best performance on a video dataset and that, therefore, it is worth comparing the performance of different CNNs under similar circumstances for the HAR problem, this work proposes an analysis between eight different CNN architectures. Each one of the CNN was exclusively trained with RGB images, which were extracted from the frames of the different classes of videos of HMDB51 dataset. To make the classification of an activity in video, we average the predictions taking into account the successes. We also made some ensembles with the best performance CNNs to measure the improvement in accuracy. Our results suggest that Xception is a strong baseline model that could be used by the community to make their comparisons of their proposals more robust.

Accurate segmentation and delineation of the sub-tumor regions are very challenging tasks due to the nature of the tumor. Traditionally, convolutional neural networks (CNNs) have succeeded in achieving most promising performance for the segmentation of brain tumor; however, handcrafted features remain very important in identification of tumor's boundary regions accurately. The present work proposes a robust deep learning-based model with three different CNN architectures along with pre-defined handcrafted features for brain tumor segmentation, mainly to find out more prominent boundaries of the core and enhanced tumor regions. Generally, automatic CNN architecture does not use the pre-defined handcrafted features because it extracts the features automatically. In this present work, several pre-defined handcrafted features are computed from four MRI modalities (T2, FLAIR, T1c, and T1) with the help of additional handcrafted masks according to user interest and fed to the convolutional features (automatic features) to improve the overall performance of the proposed CNN model for tumor segmentation. Multi-pathway CNN is explored in this present work along with single-pathway CNN, which extracts simultaneously both local and global features to identify the accurate sub-regions of the tumor with the help of handcrafted features. The present work uses a cascaded CNN architecture, where the outcome of a CNN is considered as an additional input information to next subsequent CNNs. To extract the handcrafted features, convolutional operation was applied on the four MRI modalities with the help of several pre-defined masks to produce a predefined set of handcrafted features. The present work also investigates the usefulness of intensity normalization and data augmentation in pre-processing stage in order to handle the difficulties related to the imbalance of tumor labels. The proposed method is experimented on the BraST 2018 datasets and achieved promising results than the existing (currently published) methods with respect to different metrics such as specificity, sensitivity, and dice similarity coefficient (DSC) for complete, core, and enhanced tumor regions. Quantitatively, a notable gain is achieved around the boundaries of the sub-tumor regions using the proposed two-pathway CNN along with the handcrafted features. Graphical Abstract This data is mandatory. Please provide.

The convolutional neural network (CNN) architecture has shown remarkable success in image classification and segmentation. Its popularity has increased promptly due to various factors such as exponential growth in computational resources, availability of benchmark datasets, supporting libraries, and open-source software. The efficiency of CNN architecture majorly depends on the complexity of the architecture, availability of datasets, and hyperparameter selection. But, due to the huge number of parameters in CNN architecture, its selection has completely remained ad hoc in the past works. In this article, a novel encoding technique has been proposed that can represent complex CNN architecture effectively. The article defines basic building blocks to represent CNN architecture such as the genesis block, transit block, agile block, and output block. This encoding structure is used to generate dynamic length chromosome structure and initialized using evolutionary algorithms. A comparative analysis is also presented that shows compared its effectiveness with existing encoding representations on the basis of the number of encoding parameters, training cost, and efficiency.

Classification performance based on ImageNet is the de-facto standard metric for CNN development. In this work we challenge the notion that CNN architecture design solely based on ImageNet leads to generally effective convolutional neural network (CNN) architectures that perform well on a diverse set of datasets and application domains. To this end, we investigate and ultimately improve ImageNet as a basis for deriving such architectures. We conduct an extensive empirical study for which we train 500 CNN architectures, sampled from the broad AnyNetX design space, on ImageNet as well as 8 additional well-known image classification benchmark datasets from a diverse array of application domains. We observe that the performances of the architectures are highlydataset dependent. Some datasets even exhibit a negative error correlation with ImageNet across all architectures. We show how to significantly increase these correlations byutilizing ImageNet subsets restricted to fewer classes. These contributions can have a profound impact on the way we design future CNN architectures and help alleviate the tilt we see currently in our community with respect to over-reliance on one dataset.

The Part 1 prequel to this review evaluated the evolution of modelling techniques used in evaluation of fruit quality over the past three decades and noted a progression towards the use of artificial neural networks (ANNs) and convolutional neural networks (CNNs). In this review, Part 2, the use of CNNs for NIR fruit quality evaluation is explored, given the success of CNNs in various other fields, such as image, video, speech, and audio processing, and the availability of large (open source) datasets of fruit spectra and reference quality attribute, which is required for the training of CNN models. The review provides an overview of deep learning and the CNN architectures and techniques used in NIR spectroscopy for regression modelling, with advantages and disadvantages identified. Studies using CNN for NIR based fruit quality evaluation are then critically examined. Eight publications have presented on models using the same open-source mango dry matter calibration and test set, enabling inter-method comparisons. CNN models have been demonstrated to be accurate, precise and robust. Techniques of transfer learning for CNN models offer an alternative solution to model updating and calibration transfer methods applied in traditional chemometrics. The review has highlighted crucial areas that require resolution and exploration in this application through future research, including, (i) data requirements for training a CNN (ii) optimal spectral pre-processing for CNN (iii) CNN architecture and hyper-parameter selection and tuning for fruit quality evaluation (iv) CNN model interpretability and explainability. Future studies must conduct clearer comparison to partial least squares (PLS) regression and shallow ANNs to better assess the prospective benefit of using CNN, a more complex model. The potential for visualisation of spectra relevance to the CNN model using techniques such as GradCam, currently employed in visualising 2D-CNN models, remains to be explored.

Convolutional Neural Network (CNN) architectures for the classification of remote sensing images have been in use for the last 6 years. These CNN architectures are preferred over other standard classifiers, such as SVM and Multilayer perceptron, due to their ability to automatically extract features from image patches. Recently, attention-based models have been used for remote sensing classification because of their ability to concentrate on a few relevant features while ignoring others. To mimic the behavior of the human retina’s ganglia neuron, the concept of On-Off Center-Surround (OOCS) filters has recently been introduced with CNN. This study is an attempt to use both OOCS and attention based deep learning architecture with CNN using two remote sensing datasets. Results suggest that the use of both OOCS and the attention layer does not improve classification accuracy in comparison to the CNN model only.

An in-depth analysis of Convolutional Neural Network architectures with transfer learning for skin disease diagnosis

BackgroundThe images of different flower species had small inter-class variations across different classes as well as large intra-class variations within a class. Flower classification techniques are mainly based on the features of color, shape and texture, however, the procedure always involves too many heuristics as well as manual labor to tweak parameters, which often leads to datasets with poor qualitative and quantitative measures. The current study proposed a deep architecture of convolutional neural network (CNN) for the purposes of improving the accuracy of identifying the white flowers of Fragaria × ananassa from other three wild flower species of Androsace umbellata (Lour.) Merr., Bidens pilosa L. and Trifolium repens L. in fields.ResultsThe explored CNN architecture consisted of eightfolds of learnable weights including 5 convolutional layers and 3 fully connected layers, which received a true color 227 × 227 pixels flower image as its input. The developed CNN detector was able to classify the instances of flowers at overall average accuracies of 99.2 and 95.0% in the training and test procedure, respectively. The state-of-the-art CNN model was compared with the classical models of the scale-invariant feature transform (SIFT) features and the pyramid histogram of orientated gradient (PHOG) features combined with the multi-class support vector machine (SVM) algorithm. The proposed model turned out to be much more accurate than the traditional models of SIFT + SVM at overall average accuracies of 82.9 and 55.6% in the training and test procedure and PHOG + SVM at overall average accuracies of 78.3 and 63.1%, respectively.ConclusionsThe proposed state-of-the-art CNN method demonstrates that artificial intelligence is capable of precise classification of the white flower images, whose accuracy is comparable to traditional algorithms. The presented algorithm can be further used for the discrimination of white wild flowers in fields.

Although font recognition is a fundamental issue in the field of document analysis and recognition, it was usually ignored in the past. With the development of optical character recognition (OCR), font recognition becomes more and more important. This paper proposed a well-designed convolutional neural network (CNN) architecture for traditional Mongolian font recognition by means of a single word. To be specific, the whole word image is regarded as input of CNN. Hence, the word images should be normalized into the same size before being inputted into CNN. By comparison, an appropriate aspect ratio for the traditional Mongolian word images has been determined. Experimental results demonstrate that the proposed CNN architecture outperforms three classic CNN architectures, including LeNet-5, AlexNet and GoogLeNet. Therefore, the proposed CNN is much more suitable for the task of the traditional Mongolian font recognition in the way of a single word.

Ultrasound (US) is the preferred modality for fatty liver disease diagnosis due to its noninvasive, real-time, and cost-effective imaging capabilities. However, traditional B-mode US is qualitative, and therefore, the assessment is very subjective. Computer-aided diagnostic tools can improve the specificity and sensitivity of US and help clinicians to perform uniform diagnoses. In this work, we propose a novel deep learning model for nonalcoholic fatty liver disease classification from US data. We design a multi-feature guided multi-scale residual convolutional neural network (CNN) architecture to capture features of different receptive fields. B-mode US images are combined with their corresponding local phase filtered images and radial symmetry transformed images as multi-feature inputs for the network. Various fusion strategies are studied to improve prediction accuracy. We evaluate the designed network architectures on B-mode in vivo liver US images collected from 55 subjects. We also provide quantitative results by comparing our proposed multi-feature CNN architecture against traditional CNN designs and machine learning methods. Quantitative results show an average classification accuracy above 90% over tenfold cross-validation. Our proposed method achieves a 97.8% area under the ROC curve (AUC) for the patient-specific leave-one-out cross-validation (LOOCV) evaluation. Comprehensive validation results further demonstrate that our proposed approaches achieve significant improvements compared to training mono-feature CNN architectures ([Formula: see text]). Feature combination is valuable for the traditional classification methods, and the use of multi-scale CNN can improve liver classification accuracy. Based on the promising performance, the proposed method has the potential in practical applications to help radiologists diagnose nonalcoholic fatty liver disease.

Porosity severely reduces the mechanical performance of composite laminates and methods for automatic segmentation of void phases are growing. This study investigates porosity in composite materials that take the form of interlaminar voids and dry tow areas. Deep Learning was used for the segmentation of X-ray micrographs via the implementation of eight state-of-the-art Convolutional Neural Network (CNN) architectures trained with data sets containing twenty-five, fifty, and one-hundred images. The combination of hyperparameters providing the highest accuracy for each architecture and training set size was achieved through the optimisation of six relevant hyperparameters, including the cut-off probability applied to output probability maps. Additionally, the properties of the CNN architectures ( e.g., layer typology, connections, density…) were found to play a determining role, not only in the segmentation results but also in the associated computing effort. U-Net and FCDenseNet outperformed the FCN-8s, FCN-16, SegNet, LinkNet, ResNet18 and Xception CNN architectures. However, the CNNs generally outperformed the standard thresholding approaches, especially in sub-volumes containing low porosity (1.07%) where the influence on strength is very sensitive in high-performance composites. In low porosity samples, U-Net and FCDenseNet consistently segmented voids to 85% + accuracy, whereas thresholding was only half as accurate, at around 40%. The results provide a strong motivation to replace thresholding as a segmentation method for composite X-ray micrographs. In terms of efficiency, the reduced complexity of the U-Net network allowed for an average reduction of the training time (−36%) and prediction time (−17%) when compared to FCDenseNet.