- Research Article
57
- 10.1137/0706035
The Numerical Solution of Integral Equations on the Half-Line
- Sep 01, 1969
- SIAM Journal on Numerical Analysis
- Kendall Atkinson
The Numerical Solution of Integral Equations on the Half-Line
The study of ions in water by statistical mechanical methods has made a significant contribution to the authors understanding of solution chemistry and biological processes in saline solutions. Integral equation methods have been used recently by Pettitt and Rossky to study solvent-averaged forces and the effective interactions or the potentials of mean force (PMF) for the alkali halides in water at infinite dilution. In this communication, they report a quantitative study of the Cl/sup -/-Cl/sup -/ PMF in water with use of an umbrella sampling method and the same Hamiltonian as that used in the integral equation study. The system studied here consists of two chloride ions and 295 water molecules in a rectangular box with periodic boundary conditions and lengths of 25.4, 18.6, and 18.6 A in the x,y,z directions, respectively.
The Numerical Solution of Integral Equations on the Half-Line
The Numerical Solution of Integral Equations on the Half-Line
Mode Expansion in Equilibrium Statistical Mechanics. II. A Rapidly Convergent Theory of Ionic Solutions
The mode expansion theory, which was derived in a previous paper, is applied to the calculation of thermodynamic properties of an ionic solution. The specific system investigated is the 1–1 restricted primitive model aqueous electrolyte. In this model, the effective interactions (potentials of mean force at infinite dilution) between ions are a sum of pair potentials, and the pair potentials are hard-core repulsions (all with diameter 4.6 Å) plus a positive or negative Coulomb potential reduced by the dielectric constant of water. For this system, the mode expansion converges rapidly. At salt concentrations between 0.05 and 1.0M, only the first three terms in the expansion are needed to obtain osmotic coefficients and activity coefficients which agree very well with the accurate results obtained by integral equation methods. Due to the computational simplicity of the mode expansion, it is argued that the theory provides a convenient method for studying more realistic models for electrolytes.
Read moreFree energy calculation using molecular dynamics simulation combined with the three-dimensional reference interaction site model theory. II. Thermodynamic integration along a spatial reaction coordinate
We propose the thermodynamic integration along a spatial reaction coordinate using the molecular dynamics simulation combined with the three-dimensional reference interaction site model theory. This method provides a free energy calculation in solution along the reaction coordinate defined by the Cartesian coordinates of the solute atoms. The proposed method is based on the blue moon algorithm which can, in principle, handle any reaction coordinate as far as it is defined by the solute atom positions. In this article, we apply the present method to the complex formation process of the crown ether 18-Crown-6 (18C6) with the potassium ion in an aqueous solution. The separation between the geometric centers of these two molecules is taken to be the reaction coordinate for this system. The potential of mean force (PMF) becomes the maximum at the separation between the molecular centers being ∼4 Å, which can be identified as the free energy barrier in the process of the molecular recognition. In a separation further than the free energy barrier, the PMF is slightly reduced to exhibit a plateau. In the region closer than the free energy barrier, approach of the potassium ion to the center of 18C6 also decreases the PMF. When the potassium ion is accommodated at the center of 18C6, the free energy is lower by -5.7 ± 0.7 kcal/mol than that at the above mentioned plateau or converged state. By comparing the results with those from the free energy calculation along the coupling parameters obtained in our previous paper [T. Miyata, Y. Ikuta, and F. Hirata, J. Chem. Phys. 133, 044114 (2010)], it is found that the effective interaction in water between 18C6 and the potassium ion vanishes beyond the molecular-center-separation of 10 Å. Furthermore, the conformation of 18C6 is found to be significantly changed depending upon the 18C6-K(+) distance. A proper conformational sampling and an accurate solvent treatment are crucial for realizing the accurate PMF, and we believe that the proposed method is useful to evaluate the PMF in a solution. A discussion upon the PMF in terms of the three-dimensional distribution function for the solvent is also presented.
Read moreThe multiscale coarse-graining method. I. A rigorous bridge between atomistic and coarse-grained models.
Coarse-grained (CG) models provide a computationally efficient method for rapidly investigating the long time- and length-scale processes that play a critical role in many important biological and soft matter processes. Recently, Izvekov and Voth introduced a new multiscale coarse-graining (MS-CG) method [J. Phys. Chem. B 109, 2469 (2005); J. Chem. Phys. 123, 134105 (2005)] for determining the effective interactions between CG sites using information from simulations of atomically detailed models. The present work develops a formal statistical mechanical framework for the MS-CG method and demonstrates that the variational principle underlying the method may, in principle, be employed to determine the many-body potential of mean force (PMF) that governs the equilibrium distribution of positions of the CG sites for the MS-CG models. A CG model that employs such a PMF as a "potential energy function" will generate an equilibrium probability distribution of CG sites that is consistent with the atomically detailed model from which the PMF is derived. Consequently, the MS-CG method provides a formal multiscale bridge rigorously connecting the equilibrium ensembles generated with atomistic and CG models. The variational principle also suggests a class of practical algorithms for calculating approximations to this many-body PMF that are optimal. These algorithms use computer simulation data from the atomically detailed model. Finally, important generalizations of the MS-CG method are introduced for treating systems with rigid intramolecular constraints and for developing CG models whose equilibrium momentum distribution is consistent with that of an atomically detailed model.
Read moreIntegral equation method for 3‐D modeling of electromagnetic fields in complex structures with inhomogeneous background conductivity in marine CSEM applications
We present a new formulation of the integral equation (IE) method for models with variable background conductivity. This method overcomes the standard limitation of the conventional IE method related to the use of a horizontally layered background only. The new IE method still employs the Green's functions for a horizontally layered 1‐D model. However, the new method allows us to use an inhomogeneous background with the IE method. The method was carefully tested for modeling the electromagnetic (EM) field for complex structures with known variable background conductivity. It can find wide application in modeling EM data for multiple geological models with some common geoelectrical features. As an example, we consider marine controlled source EM (MCSEM) application for simulating EM response of a petroleum reservoir in the presence of a salt dome structure.
Read moreTheoretical Study of Base-Catalyzed Amide Hydrolysis: Gas- and Aqueous-Phase Hydrolysis of Formamide
Base-catalyzed hydrolysis of formamide in the gas phase and in aqueous solution has been studied using a combination of quantum chemical and statistical mechanical methods. A three-step procedure has been applied which comprises the determination of a gas-phase reaction path by high-level ab initio calculations, the calibration of empirical solute−solvent potentials, and classical Monte Carlo simulations of the solute immersed in a bath of solvent molecules. These simulations yield the solvent effect as a potential of mean force along the predetermined reaction coordinate. Each of the three consecutive steps of base-catalyzed hydrolysis has been analyzed in detail: the formation of a tetrahedral intermediate, its conformational isomerization, and the subsequent breakdown to products. The reaction is very exothermic in the gas phase and involves only moderate barriers for the latter two steps. Aqueous solvent, however, induces a significant barrier toward formation of the intermediate. On the other hand, ...
Read moreNumerial Methods for Volterra Integral Equations with Singular Kernels
Numerial Methods for Volterra Integral Equations with Singular Kernels
Computational and Experimental Investigations of the Role of Water and Alcohols in the Desorption of Heterocyclic Aromatic Compounds from Kaolinite in Toluene
Nonaqueous extraction is an attractive alternative to the currently employed warm water process for extraction of bitumen from oil sands, as it could use less energy and water. Hydroxylated cosolvents, such as alcohols, that compete for the adsorptive clay surfaces and help release bitumen components could help improve bitumen recovery. The water naturally present in oil sand also affects oil–mineral interactions. Electronic structure methods and the statistical-mechanical 3D-RISM-KH molecular theory of solvation as well as experimental desorption measurements are employed to study the effects of water and aliphatic alcohol cosolvents in toluene solvent on the desorption of fused pyridinic heterocycles (ArN) from kaolinite. The geometries of phenanthridine and acridine (representative of pyridinic heterocycles of petroleum asphaltenes) adsorbed on the kaolinite clay surface are optimized in periodic boundary conditions using density functional theory. The 3D-RISM-KH method is employed to calculate the solvation free energy and potential of mean force for adsorption of the heterocycles on kaolinite in pure and alcohol-containing toluene. The potentials of mean force show that the adsorption of the fused pyridines on kaolinite is stronger in pure toluene than in toluene mixed with aliphatic alcohol. Analysis of the mechanism of desorption of phenanthridine and acridine from kaolinite in toluene containing alcohol reveals that the alcohol stabilizes both the pyridinic moiety and kaolinite platelet by hydrogen bonding, thus disrupting the ArN···HO–Al(kaolinite) hydrogen bond. A mechanism for retention of toluene on kaolinite is also highlighted. Experimental studies of the desorption of fused pyridines from an ArN–kaolinite aggregate show that in water-saturated toluene the rate of desorption of the phenanthridine from kaolinite is twice as high as that in dry toluene. The experimental and computational results show that water and aliphatic alcohols in toluene help desorb pyridinic heterocycles from kaolinite, a clay mineral abundant in the oil sands. The presented insights are valuable for understanding the molecule-clay interactions in solution and relevant to improving the nonaqueous extraction of bitumen from oil sand.
Read moreIntegral equation theory study on the structure and effective interactions in star polymer nanocomposite melts
The polymer reference interaction site model theory is used to investigate the radial distribution function, potential of mean force, depletion force, and second virial coefficient in star polymer nanocomposite melts. The contact aggregation of nanoparticles for relatively weak nanoparticle-monomer attraction and the bridging aggregation of nanoparticles for very large nanoparticle-monomer attraction are observed. The star architecture can well suppress the organization states of direct contact and bridging structure for the moderate nanoparticle-monomer attraction, and promote the bridging-type organization for relatively large nanoparticle-monomer attraction. At constant particle volume fraction, the arm length quantitatively affects the organization states of star polymer nanocomposite melt, and larger repulsive barriers are existent to prevent the contact aggregation of larger nanoparticles. These observations provide useful information for the development of new nanocomposite materials.
Read moreTheory of the Miscibility of Fullerenes in Random Copolymer Melts
We combine polymer integral equation theory and computational chemistry methods to study the interfacial structure, effective interactions, miscibility and spatial dispersion mechanism of fullerenes dissolved in specific random AB copolymer melts characterized by strong noncovalent electron donor–acceptor interactions with the nanofiller. A statistical mechanical basis is developed for designing random copolymers to optimize fullerene dispersion at intermediate copolymer compositions. Pair correlation calculations reveal a strong sensitivity of interfacial packing near the fullerene to copolymer composition and adsorption energy mismatch. The potential of mean force between fullerenes displays rich trends, often nonmonotonic with copolymer composition, reflecting a nonadditive competition between direct filler attractions and polymer-mediated bridging and steric stabilization. The spinodal phase diagrams are in qualitative agreement with recent solubility limit experimental observations on three systems, and testable predictions are made for other random copolymers. The distinctive nonmonotonic variation of miscibility with copolymer composition is found to be primarily a consequence of composition-dependent, spatially short-range attractions between the A and B monomers with the fullerene and nontrivial pair correlations. A remarkably rich, polymer-specific temperature dependence of the spinodal diagram is predicted, which reflects the thermal sensitivity of spatial correlations which can result in fullerene miscibility either increasing or decreasing with cooling. The calculations are contrasted with a simpler effective homopolymer model and the random structure Flory–Huggins model. The former appears to be qualitatively reasonable but can incur large quantitative errors since it misses preferential packing of monomers near nanoparticles, while the latter appears to fail qualitatively due to its neglect of all spatial correlations.
Read moreEffect of Solutes on the Structure and Energetics of a Model Solvent
The effect of solutes on the energetics of the solvent and the propagation of structural effects through the solvent are studied in a model one-dimensional liquid solution. The molecular origins of the difference between inserting a solute molecule into the solvent at fixed volume and at fixed pressure are illuminated. The relation between the potential of mean force between solutes at infinite dilution and the correlation function in the pure solvent is illustrated in the model.
Read moreLangevin and molecular dynamics simulations of Lennard-Jones liquids
Simulations by Langevin dynamics technique are compared with molecular dynamics simulations. The potential of mean force and the self-diffusion coefficients at infinite dilution are obtained from suitable molecular dynamics simulations. A very simple case is studied: pure liquid krypton at three different thermodynamic states. Radial distribution functions obtained by both methods are in good agreement but marked discrepancies in time correlation functions and in self-diffusion coefficients are observed. These discrepancies may be attributed to hydrodynamic interactions and memory effects, which are ignored in our Langevin dynamics simulations.
Read moreOn attractive interaction of a colloid pair of like charge at infinite dilution
Numerical data on the potential of mean force W(r) at infinite dilution of a highly charged colloid pair embedded in a 1:1 electrolyte are reported. The authors obtain attractive minima (W<0) at short interparticle distance in these potential functions in hypernetted chain (HNC) approximation, as salt concentration is increased. These minima, however, disappear in all system sets studied when a self-consistent Zerah-Hansen (ZH) closure is used. The authors infer that the attractive minima obtained in a HNC closure are spurious and result from the neglect of bridge diagrams in HNC approximation. An expression of bridge function, which the ZH closure in effect incorporates in W(r) to remove attractive minima, is derived in terms of modification of correlation functions. Features of repulsive pair potentials obtained using the ZH closure, their dependence on particle charge and salt concentration, and their agreement with those of the Derajguin-Landau-Verwey-Overbeek theory are investigated.
Read moreThe computation of a potential of mean force: Choice of the biasing potential in the umbrella sampling technique
Generally, the conformational equilibrium of flexible molecules changes upon solvation. The equilibrium distribution of conformers is determined by the potential of mean force for the relevant degrees of freedom. However, the determination of the potential of mean force by straightforward computer simulation is often impracticable owing to the presence of large energy barriers which prevent efficient sampling. A frequently chosen technique to overcome the problems associated with such barriers is the umbrella sampling technique. Using molecular dynamics simulation of 1,2-dichloroethane solvated in water as a model case, we have investigated the influence of the choice of the biasing potential in the umbrella sampling technique on the computation of the dihedral angle potential of mean force. The efficiencies of one- and multiple-window techniques are compared. For short simulation periods (25 ps) the latter technique performs better than the former. For longer simulation periods the performance difference is obscured by fluctuations caused by insufficient sampling of other slow processes occurring in the system, induced by the anisotropy of the periodic boundary conditions.
Read moreA treatment of solvent effects in the potential theory of electrolyte solutions
The potential theory of electrolyte solutions is extended to non-ideal solvents using the Kirkwood hierarchy of integral equations. Two closures are considered in the statistical mechanical analysis. The first closure, which is equivalent to that of Debye and Hückel, implies a dielectric constant of 1 + x (x = 4π∑σμσ 2ρσ kT, μσ dipole moment, ρσ dipole number density) and Debye shielding in the ion-dipole, dipole-dipole potentials of mean force. The second closure leads to the Onsager expression for the dielectric constant and predicts that the primitive model potential of mean force at infinite solute dilution is modified by a damped oscillatory term. Within this closure the analysis given here is restricted to those values of x such that Onsager's dielectric constant is less than 5·603.
Read more