以CIDOC CRM為基礎的推論平台–整合異質性影像資料庫的詮釋性與概念性知識

The theme of the work presented here is image retrieval using texture patterns generated from Haar transform matrix and image bitmaps. Different texture patterns namely '4-pattern', '16-pattern', '64-pattern', '256-pattern' and '1024-pattern' are generated using Haar transform matrix and then compared with the bitmap of an image to generate the feature vector as the matching number of ones and minus ones per texture pattern. The proposed content based image retrieval (CBIR) techniques are tested on a generic image database having 1000 images spread across 11 categories. For each proposed CBIR technique 55 queries (randomly selected 5 per category) are fired on the image database. To compare the performance of image retrieval techniques, crossover point of average precision and recall values of all the queries are computed per image retrieval technique. Ameliorated performance (higher precision and recall values) has been observed with the proposed methods compared to the colour averaging based image retrieval techniques. Further the performance of proposed image retrieval methods is enhanced using the combination of original image and even image part. In the discussed image retrieval methods, the combination of original and even image part for 256-pattern texture gives the highest crossover point of precision and recall reflecting better performance.

In the field of computer vision and image processing CBIR (Content based image retrieval) system become an active research area. The CBIR technique involves feature extraction based on image features (like color, shape and texture) and defining rules for comparing image. A classifier is also used by authors for image classification. For this purpose an image database taken from James Z. Wang research group website is used by many authors. Due to enormous increase in the size of database traditional methods of image retrieval by using keywords does not provide accurate result. Thus the concept of CBIR system is emerged. In last couple of years many method of feature extraction is developed but since now researcher are not able to develop a system which has gained high accuracy of human visual perception in distinguishing pictures. Therefore earlier researchers have concentrated to increase the retrieval accuracy of CBIR system by using different combination of features. The objective of this paper is to present review on a CBIR technique which combined four kinds of features set including every kind of feature for developing feature vector. Color based features (histogram), statistical features (mean, median and standard deviation), spatial features (Gabor feature and wavelet features) and texture features (GLCM) is used for forming feature vector. A SVM classifier is used with CBIR system to increase retrieval accuracy. SVM (support vector machine) is a machine learning classifier which provides good classification accuracy. Keywords: CBIR, SVM, NN, GLCM, HSV Color space, Euclidean distance matrix.

As the use of digital media increases, effective retrieval and management techniques become more important. In order to extract useful information from this huge amount of data, many content based image retrieval (CBIR) systems have been developed. A typical CBIR system captures image features such as color, texture, or shape of objects in the query image and tries to retrieve images from the database with similar features. The main advantage of CBIR systems with relevance feedback is that these systems take into account the gap between the high-level concepts and low-level features and subjectivity of human perception of visual content. In this paper, a CBIR system based on color histogram has been presented and a new approach for image storage and retrieval called association-based image retrieval (ABIR) has been studied. The results of both systems have been shown.

In recent years, secure image archival and retrieval model in cloud computing (CC) received significant attention to ensure data confidentiality and secured data transmission among cloud server and clients cloud storage and users. Traditional secure image retrieval (IR) techniques are not applicable to adapt with a large-scale IR in cloud environment. In order to overcome these issues, this article introduces an effective secure IR scheme using Inception with ResNet v2 (SIRS-IR) and Multiple Share Creation (MSC) scheme. The proposed method uses Inception with ResNet v2 model based feature extraction process. At the same time, the MSC process is utilized for multiple share generation and then encryption of shares takes place using double chaotic logistic map (DLCM) technique. Besides, the encrypted shares and the respective feature vectors are saved in the cloud server with the corresponding image identification number. During the IR process for the applied QI, the SIRS-IR model extracts the feature vectors and performs similarity measurement to retrieve the related images from the database interms of encrypted shares. Finally, the share decryption process is carried out for the reconstruction of original images with no loss of quality. Extensive experimentations were performed to verify the retrieval performance and image quality of the reconstructed images using Corel10K dataset. The obtained results stated that the presented SIRS-IR model is found to be superior to other methods in a considerable way.

Image retrieval is a critical task in many fields such as indexing and Content-Based Image Retrieval is a tried and tested method for image retrieval. With advances in graphics and visualization techniques, image retrieval should be easy, quick and flexible. The aim of this work is to develop an efficient image indexing and retrieval system to collate similar images or images based on conditioned queries in the form of an image itself. The indexing method has been performed using wavelet transform and related mechanisms. Its detailing can easily entail description from a broad range to a narrow range. The indexing algorithm applies a Haar Wavelet-Based Perceptual Similarity Index (HaarPSI) for Image Quality Assessment. The HaarPSI utilizes the coefficients obtained from a Haar wavelet decomposition to assess local similarities between two images, as well as the relative importance of image areas. Results show that the algorithm used is able to retrieve and display images with high retrieval accuracy and medium relevance.The proposed methodology has been tested against known image retrieval techniques and was found to be comparable and in some cases better than most prior known techniques. The testing was performed on images of varied types, from multiple datasets and sizes. The accuracy was found to be 99% in most cases. All in all, this study introduces a simple and convenient way of offline image searches on desktop computers and provides a stepping stone to future content-based image retrieval systems built for similar purposes.

Multi-joint histogram based modelling for image indexing and retrieval

Content-based image retrieval (CBIR) techniques will be part of the next generation of search engines. However, even with a suitable retrieval method, real-time image retrieval from a large image database still requires extremely high computational power. In this paper, a Web-based image database indexing and retrieval system is described. It uses fast CBIR with Beowulf-Class parallel computing engine (Super Abacus) to efficiently and effectively shorten the retrieval time. Content-based image retrieval with several parallel algorithms for images which query different color spaces and the compressed-domain of the images are developed to achieve higher efficiency. Text-based query is also supported for images using a conventional annotation approach.

This paper presents an image representation and matching framework for image categorization in medical image archives. Categorization enables one to determine automatically, based on the image content, the examined body region and imaging modality. It is a basic step in content-based image retrieval (CBIR) systems, the goal of which is to augment text-based search with visual information analysis. CBIR systems are currently being integrated with picture archiving and communication systems for increasing the overall search capabilities and tools available to radiologists. The proposed methodology is comprised of a continuous and probabilistic image representation scheme using Gaussian mixture modeling (GMM) along with information-theoretic image matching via the Kullback-Leibler (KL) measure. The GMM-KL framework is used for matching and categorizing X-ray images by body regions. A multidimensional feature space is used to represent the image input, including intensity, texture, and spatial information. Unsupervised clustering via the GMM is used to extract coherent regions in feature space that are then used in the matching process. A dominant characteristic of the radiological images is their poor contrast and large intensity variations. This presents a challenge to matching among the images, and is handled via an illumination-invariant representation. The GMM-KL framework is evaluated for image categorization and image retrieval on a dataset of 1500 radiological images. A classification rate of 97.5% was achieved. The classification results compare favorably with reported global and local representation schemes. Precision versus recall curves indicate a strong retrieval result as compared with other state-of-the-art retrieval techniques. Finally, category models are learned and results are presented for comparing images to learned category models.

Introduction: Content-based image retrieval (CBIR) retrieves the images from the vast image repositories. Research in the CBIR domain gets attention due to the massive number of images generated by the mobiles and various image-capturing machines. Objectives: Any image retrieval system’s primary goal is to reduce the semantic gap between low-level features and high-level perception. Methods: The CBIR techniques are classified into multiple categories based on the feature extraction and retrieval mechanism. These categories are feature-based, machine-learning-based, and deep-learning-based methods. The pioneer techniques for each category are explained in detail in this chapter. Results: The comparative analysis has been done to highlight the advantages of techniques over others. Conclusion: The various application area of the CBIR has been described. The most evolving application is the content-based medical image retrieval (CBMIR) system. The applicability of the CBMIR system in different medical science domains is explained in detail.

As we all know, the content-based image retrieval (CBIR) is very time-consuming due to the extraction and matching of high dimensional and complex features. The traditional CBIR systems could not respond to a very large number of retrieval requests at mean time, which are submitted from the Internet. In this paper, we propose a content-based parallel image retrieval system to achieve high responding ability. Our system is developed on cluster architectures. It has several retrieval servers to supply the service of content-based image retrieval. Our system adopts the Browser/Server (B/S) mode. The users could visit our system though web pages. Our system uses the Symmetrical Color-Spatial Features (SCSF)[25] to represent the content of an image. The SCSF is effective and efficient for image matching because it is independent of image distortion such as rotation and flip as well as it increases the matching accuracy. The SCSF was organized by M-tree[16], which could speedup the searching procedure. Our experiments show that the image matching is quickly and efficiently with the use of SCSF. And with the support of several retrieval servers, the system could respond to many users at mean time. (Abstract)

Purpose Due to the worldwide growth of digital image sharing and the maturity of the tourism industry, the vast and growing collections of digital images have become a challenge for those who use and/or manage these image data across tourism settings. To overcome the image indexing task with less labour cost and improve the image retrieval task with less human errors, the content-based image retrieval (CBIR) technique has been investigated for the tourism domain particularly. This paper aims to review the relevant literature in the field to understand these previous works and identify research gaps for future directions. Design/methodology/approach A systematic and comprehensive review of CBIR studies in tourism from the year 2010 to 2019, focussing on journal articles and conference proceedings in reputable online databases, is conducted by taking a comparative approach to critically analyse and address the trends of each fundamental element in these research experiments. Findings Based on the review of the literature, the trends of CBIR studies in tourism is to improve image representation and retrieval by advancing existing feature extraction techniques, contributing novel techniques in the feature extraction process through fine-tuning fusion features and improving image query of CBIR systems. Co-authorship, tourist attraction sector and fusion image features have been in focus. Nonetheless, the number of studies in other tourism sectors and available image databases could be further explored. Originality/value The fact that no existing academic review of CBIR studies in tourism makes this paper a novel contribution.

In a content-based image retrieval (CBIR) system, indexing feature vectors and the similarity measure between feature vectors are two key factors for retrieval performance. We present a new CBIR system with statistical-model based image feature extraction in the wavelet domain and a Kullback divergence based similarity measure. A two component Gaussian mixture model (GMM) in the wavelet domain is employed and the model parameters are used to form features for image indexing. A new Kullback divergence based similarity measure is then presented for image retrieval. The experimental results demonstrate that the similarity measure based on the Kullback divergence is more effective than conventional similarity measures, such as the city-block distance and the Euclidean distance. It is shown that the new CBIR system, with the combination of the GMM and the new Kullback divergence based similarity measure, outperforms most other methods in retrieval performance for texture images, while keeping a comparable level of computational complexity.

There is a growing trend for using content‐based image retrieval (CBIR) systems these days because of the constantly growing interest in digital content. Therefore, the ability of the CBIR to perform the CBIR process will depend on the feature extraction process and its basis, for the retrieval will be done on. Numerous researchers put forward various techniques for feature extraction to enhance the nature of the system. Since features play a very key role in enhancing performance, various features can be used collectively to attain the requisite goal. To retain this in mind, we present in this paper a multifeature fusion system, where three features are integrated and form one feature to improve the situation of retrieval. For this purpose, scale‐invariant feature transform (SIFT), speeded‐up robust features (SURF), and histogram of oriented gradients (HOG) features are adopted. These features are common features that deliver information about the shape of the object and for matching purposes, two techniques of distance matching such as Euclidean and Hausdrauff distance are adopted. To assess the performance of the proposed multifeature‐based CBIR approach, experiments were conducted with the usage of a MATLAB simulator. The Corel‐1000 dataset, consisting of 10,000 images in 100 semantic classes, turned into applied, with each magnificence containing 100 images. A subset of 2500 images across 50 semantic classes was used to train the system. This research aligns with industry, innovation, and infrastructure by contributing to advancements in image processing and retrieval systems. Key characteristic descriptors, along with SIFT, SURF, HOG, texture, and multicharacteristic combinations, were extracted for retrieval functions. The results display that the usage of the Hausdrauff distance as a similarity degree outperforms Euclidean distance, accomplishing retrieval accuracies of 80.02% for HOG, 77.9% for SIFT, 79. 8% for SURF, 77.2% for texture, and 84.2% for multicharacteristic combinations, surpassing Euclidean distance results via 1.7%–3.6% across capabilities. These findings underscore the effectiveness of Hausdrauff distance in enhancing retrieval precision within the CBIR framework.

Indexing chromatic and achromatic patterns for content-based colour image retrieval

Due to the dramatically increased volume of remote sensing (RS) image archives, images are usually stored in a compressed format to reduce the storage size. Existing content-based RS image retrieval (CBIR) systems require as input fully decoded images, thus resulting in a computationally demanding task in the case of large-scale CBIR problems. To overcome this limitation, in this article, we present a novel CBIR system that achieves a coarse-to-fine progressive RS image description and retrieval in the partially decoded Joint Photographic Experts Group (JPEG) 2000 compressed domain. The proposed system initially: 1) decodes the code blocks associated only to the coarse wavelet resolution and 2) discards the most irrelevant images to the query image based on the similarities computed on the coarse resolution wavelet features of the query and archive images. Then, the code blocks associated with the subsequent resolution of the remaining images are decoded and the most irrelevant images are discarded by computing similarities considering the image features associated with both resolutions. This is achieved by using the pyramid match kernel similarity measure that assigns higher weights to the features associated with the finer wavelet resolution than to those related to the coarse wavelet resolution. These processes are iterated until the codestreams associated with the highest wavelet resolution are decoded. Then, the final retrieval is performed on a very small set of completely decoded images. Experimental results obtained on two benchmark archives of aerial images point out that the proposed system is much faster while providing a similar retrieval accuracy than the standard CBIR systems.