Classification and Trends in Adaptive Beamforming Techniques of MIMO Radar

A multiple input multiple output (MIMO) radar is an emerging field which has attracted many researchers recently. In this type of radar, unlike an standard phased array radar, one can choose transmitted probing signals freely to maximize the power around the locations of the targets of interest, or more generally to approximate a given transmit beam-pattern, or to minimize the cross-correlation of the signals reflected back to the radar by the targets of interest. These signals can be correlated to each other or noncorrelated. Many papers have investigated beampattern design and waveforming in MIMO radars. One of the most famous approaches for beampattern design is named covariance based method which design cross-correlation matrix of transmitted signals instead of the signals. On the other hand, many papers have investigated beamforming of an standard phased array radar in different ways. In this paper it is desirable to design beampattern of a phased array radar by means of the MIMO radar covariance based beampattern design method, as a special case of general MIMO radar. Although many approaches are available for beamforming of phased array radar this approach would have less complexity compare to them. MATLAB software is being employed for simulations. (6 pages)

Addressed with bistatic multiple-input and multiple- output (MIMO) radar, a joint estimator of both Doppler frequency and angle is proposed. The angle of the target are estimated using beamforming technique after the Doppler frequency is estimated via MUSIC or ESPRIT approach, which are automatically paired with- out extra computation burden. The method has better angle resolu- tion than conventional subspace decomposition algorithms. The si- mulation results demonstrate its effectiveness and robustness. Index Terms - Array signal processing, MIMO radar, bistatic, beamforming, Doppler frequency estimation, angle estimation

By comparing the disadvantages and advantages of conventional algorithms of adaptive beamformer, we put forward an adaptive beamformer based on weight iterative algorithm for suppressing RFI according to the distributing properties of radio frequency interference (RFI) in different range cell. We get the initial weight vector of the adaptive beamformer by using the algorithm of minimum variance distortionless response (MVDR). The other weight vectors are computed by the algorithm of linearly constrained minimum variance (LCMV) based on the last time weight vector. The covariance matrix of the two algorithms, i.e. MVDV and LCMV, are constructed with the array snapshots in the far range cells which have not useful radar echo. Thus the free degree of antenna array is increased. The feasibility of the adaptive beamformer is proved by using it to process the actual radar data.

Multiple Input Multiple Output (MIMO) radar is a new radar technique. It has many advantages over conventional phased radar in many ways such as anti-intercept of radar signal, low velocity target detection, and resolution. The signal transmit matrix of MIMO radar has much information such as target angle. In this paper, we analyze the signal model for MIMO radar. And then we present a new method to estimate the target angle from the matrix. At last, we show the efficiency by some simulations.

Direction of arrival (DOA) estimation is an essential problem in the radar systems. In this paper, the problem of DOA estimation is addressed in the multiple-input and multiple-output (MIMO) radar system for the fast-moving targets. A virtual aperture is provided by orthogonal waveforms in the MIMO radar to improve the DOA estimation performance. Different from the existing methods, we consider the DOA estimation method with only one snapshot for the fast-moving targets and achieve the super-resolution estimation from the snapshot. Based on a least absolute shrinkage and selection operator (LASSO), a denoise method is formulated to obtain a sparse approximation to the received signals, where the sparsity is measured by a new type of atomic norm for the MIMO radar system. However, the denoise problem cannot be solved efficiently. Then, by deriving the dual norm of the new atomic norm, a semidefinite matrix is constructed from the denoise problem to formulate a semidefinite problem with the dual optimization problem. Finally, the DOA is estimated by peak-searching the spatial spectrum. Simulation results show that the proposed method achieves better performance of the DOA estimation in the MIMO radar system with only one snapshot.

Visible Light Communication (VLC) has emerged as a powerful technique for wireless communication systems. Providing high data rate and increasing capacity are the major problems in VLC. Recent evidence suggests that Multiple Input Multiple Output (MIMO) technique can offers improved data rates and increased link range. This paper describes the design and implementation of visible light communication system in indoor environment exploring the benefits of MIMO. The specific objective of this research was to implement a 4×4 Multiple Input (LEDs) Multiple Output (photodetectors)-VLC communication system, where a 16 white power LEDs in four arrays are setting up at transmitter and four RX modules are setting up at receiver side without the need for additional power or bandwidth as well as analyze a mathematical model for a VLC- 4×4 MIMO with different modes such as the suitable angles to cover the entire room. The research designs practically an electronic circuit for the transmitter and receiver with inexpensive components. The power distribution of different propagation modes is calculated for Single Input Single Output (SISO) and MIMO channels in typical room dimensions. The results in this paper indicate that the power is distributed uniformly for entire room when implemented VLC-MIMO as compared to VLC-SISO. Furthermore, a 4×4 MIMO implementing VLC is compared in term of BER vs. SINR with SISO communication system for both Line of Sight (LOS) and Non Line of Sight (NLOS) propagation modes. Comparing the two results of LOS and NLOS, it can be seen that a 4×4 MIMO implementing VLC for LOS perform better than the same system with NLOS due to decreasing in the received power resulted from the multipath effect.

Speech enhancement is an important pre-processing step in a wide diversity of practical fields related to speech signals, and many signal-enhancement methods, such as fixed beamforming and adaptive beamforming, have already been proposed for speech enhancement. However, lack of comprehensive and quantitative performance evaluation of current enhancement methods when multi-speeches exist simultaneously, it is difficult to choose an appropriate enhancement method in a practical application. This work aims to study the implementation of several enhancement methods for multi-speech enhancement in indoor environment of T60 = 0 s and T60 = 0.3 s. We first propose and compare two types of enhancement approaches. The first type is the basic enhancement methods, including the delay-and-sum beamforming (DSB), minimum variance distortionless response (MVDR), linearly constrained minimum variance (LCMV), and independent component analysis (ICA); The second type is the improved enhancement methods, including the robust MVDR and LCMV, realized by eigen decomposition and diagonal loading. In addition, the online enhancement performance based on the iteration of single-frame speech signals is then researched. The experimental results show that the enhancement effect of LCMV and ICA is relatively more stable in the case of the basic enhancement methods; in the case of the improved enhancement algorithms, the methods which employed diagonal loading iterations are better. In the case of the online enhancement, the DSB with frequency masking yields the best performance on the signal-to-interferences ratio (SIR) and possesses the capacity to suppress interferences.

The distributed MIMO radar system is presented on the basis of theory and technology of multiple input and multiple output (MIMO) radars. Firstly, the node radar in the distributed MIMO radar systems is introduced. Secondly, some technologies are analyzed such as antenna array, waveform design and precise simultaneous detection. Finally, simple analysis shows that this distributed MIMO radar system has good performance.

In real-world environments, the signals captured by a set of microphones in a speech communication system are mixtures of the desired signal, interference, and ambient noise. A promising solution for proper speech acquisition (with reduced noise and interference) in this context consists in using the linearly constrained minimum variance (LCMV) beamformer to reject the interference, reduce the overall mixture energy, and preserve the target signal. The minimum variance distortionless response beamformer (MVDR) is also commonly known to reduce the interference-plus-noise energy without distorting the desired signal. In either case, it is of paramount importance to accurately quantify the achieved noise and interference reduction. Indeed, it is quite reasonable to ask, for instance, about the price that has to be paid in order to achieve total removal of the interference without distorting the target signal when using the LCMV. Besides, it is fundamental to understand the effect of the MVDR on both noise and interference. In this correspondence, we investigate the performance of the MVDR and LCMV beamformers when the interference and ambient noise coexist with the target source. We demonstrate a new relationship between both filters in which the MVDR is decomposed into the LCMV and a matched filter (MVDR solution in the absence of interference). Both components are properly weighted to achieve maximum interference-plus-noise reduction. We investigate the performance of the MVDR, LCMV, and matched filters and elaborate new closed-form expressions for their output signal-to-interference ratio (SIR) and output signal-to-noise ratio (SNR). We theoretically demonstrate the tradeoff that has to be made between noise reduction and interference rejection. In fact, the total removal of the interference may severely amplify the residual ambient noise. Conversely, totally focussing on noise reduction leads to increased level of residual interference. The proposed study is finally supported by several numerical examples.

This paper deals with the problem of two-dimensional (2-D) adaptive array beamforming with multiple beam constraints (MBC) using a generalized sidelobe canceller (GSC). We present a method for the construction of signal blocking matrix required by the 2-D GSC. The resulting 2-D adaptive beamformer can provide almost the same performance as conventional 2-D adaptive beamformers based on a linearly constrained minimum variance (LCMV) criterion. The effectiveness of the proposed GSC is that the construction of the required signal blocking matrix requires only the computation of a few entries from analytical formulas. In comparison with conventional methods, the proposed technique gets rid of the computational complexity due to the eigendecomposition required for finding the 2-D signal blocking matrix. For dealing with the performance degradation due to coherent interference, we present a 2-D weighted spatial smoothing scheme to effectively alleviate the coherent jamming effect. Several simulation examples are provided for illustration and comparison.

This article proposes a method to detect vocal signals and the corresponding locations of multiple humans using a multiple-input and multiple-output (MIMO) frequency-modulated continuous-wave (FMCW) radar system. The signals of multiple humans are extracted with digital beamforming by the virtual array generated by MIMO radar processing. To remove body motion artifacts that distort the speech information detected by the radar, a body motion effect cancellation method is proposed. The technique allows recovering vocal signals from detected distorted signals by estimating phase variations due to body motions. A combination of the proposed vocal signal detection algorithm with a human localization one enables to detect speaking humans by means of the MIMO radar. Experiments verify that the proposed method can accurately locate and detect speaking humans based on their vocal vibration signals.

Multiple input multiple output (MIMO) radars have been intensively studied for their superior performance merits compared to conventional radars including improved spatial resolution and parameter estimation. To achieve these merits, the transmitted waveforms from the MIMO transmitting antennas should be mutually orthogonal. Herein, the orthogonality is attained in the Doppler domain, namely Doppler division multiple access (DDMA), as it enjoys the simplest structure among other orthogonality schemes. Heretofore, the research in MIMO radars has focused on optimizing MIMO radar performance from different aspects including efficient waveform design, antenna beam-forming, and adaptive processing techniques. However, MIMO radars have been also a target of deliberate jamming scenarios. In this paper, the focus is turned to the evaluation of the detection performance of DDMA MIMO radars in jamming environments by creating a two-sided engagement scenario. On the jammer side, a jamming technique is proposed, Doppler-range block jamming (DRBJ), to deny the detection of a DDMA MIMO radar equipped with a moving target detector (MTD). On the radar side, a comparative detection performance analysis of two different MIMO radar detectors, normalized adaptive matched filter (NAMF) and fast 3D constant false alarm rate (CFAR), is conducted using Monte Carlo simulations. This analysis unveils divergent design philosophies of the two detectors, with each prioritizing distinct performance objectives.

Multiple Input - Multiple Output (MIMO) is a new communications paradigm which brings significant benefits to future communication systems. In contrast to conventional wireless communication systems, MIMO systems exploit the spatial diversity available in multipath propagation to create parallel channels within a common bandwidth. The multiple channels can be used for capacity enhancement, coverage improvement, lower radiated power spectral density, interference/jammer suppression, multi-beam communication and battery power savings. Research, development and exploitation of MIMO technology for tactical communication systems is significantly limited by lack of mobile, real-time MIMO testbeds to verify and validate extensive theoretical results. We report a 4x4 mobile, wideband, real-time MIMO-OFDM testbed designed and developed by the team of San Diego Research Center (SDRC) and Brigham Young University (BYU). Using this testbed we have successfully demonstrated the feasibility of peer-to-peer Mobile MIMO by closing 1000m links, at 50 mph speeds, at 12 bps/Hz spectral efficiency.

Distributed multiple input multiple output (MIMO) radar has attracted much attention for its improved detection and estimation performance as well as enhanced Electronic Counter-Counter Measures (ECCM) ability. In order to protect the target from being detected and tracked by such radar, we consider a barrage jamming strategy orienting towards a distributed MIMO. We first derive the Cramer-Rao bound (CRB) of target parameters estimation using a distributed MIMO under barrage jamming environments. We then set maximizing the CRB as the criterion for jamming resource allocation, aiming at degrading the accuracy of target parameters estimation. Particle swarm optimization is utilized to solve the maximizing problem. Simulation results demonstrate the advantages of the the proposed strategy over traditional jamming methods.

The problem of tracking the direction of arrivals (DOA) and the direction of departure (DOD) of multiple moving targets is considered in bistatic multiple input multiple output (MIMO) radar. A low complexity angle tracking algorithm in bistatic MIMO radar is proposed. The proposed algorithm derived the difference between previous and current covariance matrices. And the relationship between the different of covariance matrices and the different of target angle is derived. The performance of the proposed algorithm is improved by averaging the covariance matrix elements. Last DOD and DOA are got by least square method. This algorithm avoids the decomposition of the covariance matrix and reduces the computational complexity, which realizes DOA and DOD of the adjacent moment automatic association. The simulation results demonstrate effectiveness of the proposed algorithm. The algorithm provides the technical support for the practical application of MIMO radar.