Classification of Epileptic EEG Signal Using MSLD Entropy

This paper analyzes the underlying complexity and non-linearity of electroencephalogram (EEG) signals by computing a novel multi-scale entropy measure for the classification of seizure, seizure-free and normal EEG signals. The quality factor (Q) based multi-scale entropy measure is proposed to compute the entropy of the EEG signal in different frequency-bands of interest. The Q -based entropy (QEn) is computed by decomposing the signal with the tunable-Q wavelet transform (TQWT) into the number of sub-bands and estimating K-nearest neighbor (K-NN) entropies from various sub-bands cumulatively. The optimal selection of Q and the redundancy parameter (R) of TQWT showed better robustness for entropy computation in the presence of high- and low-frequency components. The extracted features are fed to the support vector machine (SVM) classifier with the wrapper-based feature selection method. The proposed method has achieved accuracy of 100% in classifying normal (eyes-open and eyes-closed) and seizure EEG signals, 99.5% in classifying seizure-free EEG signals (from the hippocampal formation of the opposite hemisphere of the brain) from seizure EEG signals and 98% in classifying seizure-free EEG signals (from the epileptogenic zone) from seizure EEG signals, respectively, using the SVM classifier. We have also achieved classification accuracies of 99% and 98.6% in classifying seizure versus non-seizure EEG signals and the individual three classes, namely normal, seizure-free and seizure EEG signals, respectively. The performance measure of the proposed multi-scale entropy has been found to be comparable with the existing state of the art epileptic EEG signals classification methods studied using the same database.

Epilepsy is a neurological disorder that affects people of any age, which can be detected by Electroencephalogram (EEG) signals. This paper proposes a novel method called Volume of Phase Space Representation (VOPSR) to classify seizure and seizure-free EEG signals automatically. Primarily, the recorded EEG signal is disintegrated into several Intrinsic Mode Functions (IMFs) using the Empirical Mode Decomposition (EMD) method and the three-dimensional phase space have been reconstructed for the obtained IMFs. The volume is measured for the obtained 3D-PSR for different IMFs called VOPSR, which is used as a feature set for the classification of Epileptic seizure EEG signals. Support vector machine (SVM) is used as a classifier for the classification of epileptic and epileptic-free EEG signals. The classification performance of the proposed method is evaluated under different kernels such as Linear, Polynomial and Radial Basis Function (RBF) kernels. Finally, the proposed method outperforms noteworthy state-of-the-art classification methods in the context of epileptic EEG signals, achieving 99.13% accuracy (average) with the Linear, Polynomial, and RBF kernels. The proposed technique can be used to detect epilepsy from the EEG signals automatically without human intervention.

Classification of epileptic EEG signals using PSO based artificial neural network and tunable-Q wavelet transform

Epileptic seizure detection on a compressed EEG signal using energy measurement

The classification of electroencephalogram (EEG) signals is a key technique of brain–computer interface (BCI) system. In view of the complexity of EEG signals and the low accuracy in EEG signals recognition, a motor imagery EEG signals classification method with multi-domain fusion based on Dempster–Shafer (D-S) evidence theory is presented in this paper. Firstly, time domain statistics (TDS), autoregressive (AR) model and discrete wavelet transform (DWT) are used to extract features from EEG signals, respectively, and three probabilistic output support vector machine (SVM) classification models are trained based on these three feature sets. Secondly, using the output of each SVM, we construct basic probability assignment (BPA) function and get fusion BPA through D-S evidence theory. Finally, determining the class of test samples based on decision rules. Four databases from BCI competition are employed to evaluate the proposed approach, and the highest classification accuracy reaches 92.83%. Results show that this method acquires higher accuracy and has strong individual adaptability.

Epilepsy is a common phenomenon formed by abnormal discharges between brain neurons. The seizures of epilepsy are sudden and irregular. As a non-stationary signal, EEG signals can express its characteristics to a certain extent, and makes a significant difference in the monitoring and treatment of epilepsy diseases. This study employs empirical mode decomposition (EMD) to decompose the interictal and epileptic EEG signals into multiple eigenmode functions (IMF), and combines the correlation coefficient to screen the main IMF and extract its variance, fluctuation coefficient and Coefficient of variation and other features, combined with support vector machines for classification. Compared with the traditional empirical mode decomposition, this method has higher accuracy in the identification and classification of epileptic signals. The combination of this method not only provides a theoretical method for disease diagnosis and treatment, but also verifies the research and application value of EEG signals to a certain extent.

Analysis of brain activities and remote control are among the current issues that are being studied. Analysis of signals arising during brain functions is electroencephalography (EEG). EEG signals have intellectual, visual stimulation, and motion resultant forms. Especially, EEG signals generated by visual stimulus are within the scope of this study. In this study, research was carried out on the classification of EEG signals formed in a person looking at visual figures. For these studies, first of all, EEG signals from the brain were recorded with images and filtered to remove noise. Then, the features were extracted from the signals. In this study, Moment 5 feature was also used in addition to the features used in many studies such as mean, median, standard deviation and entropy. Then, classification was made using Support Vector Machine (SVM), k Nearest Neighbor (KNN), and Decision Tree (DT) algorithms. Classification was made for 4 different visual shapes used, since these shapes are square, circle, triangle, and star, and the same categorical names were used in the classification stage. As a result of the classification of EEG signals; SVM and KNN algorithms have determined which shape is viewed with 99.99% accuracy. These results show that different signals are produced in the brain according to the structure of the shape viewed. This situation shows that it can be used as a method to give patients the opportunity to express their requests just by looking or thinking.

EEG-based human recognition is increasingly becoming a popular modality for biometric authentication. Two important features of EEG signals are liveliness and the robustness against falsification. However, a comprehensive study on human authentication using EEG signal is still remains. On the other hand, low-cost wireless EEG recording devices are now growing in the market places. Although these devices have the potential to many applications, researches have yet to be done to find the feasibility of these devices. In this study, we propose a method for human identification using EEG signals obtained from such low-cost devices. EEG signal is first preprocessed to remove noise and artifacts using Bandpass FIR filter. These signals are then divided into disjoint segments. Three feature extraction methods, namely multiscale shape description (MSD), multiscale wavelet packet statistics (WPS) and multiscale wavelet packet energy statistics (WPES) are then applied. These features are finally used to train a supervised error-correcting output code multiclass model (ECOC) using support vector machine (SVM) classifier, which ultimately can recognize humans from test EEG signals. A preliminary experiment with 9 EEG records from 9 subjects shows the true positive rate of 94.44% of the proposed method.

EEG signal classification using universum support vector machine

Brain-Computer Interface (BCI) systems establish a control and communication relationship between the human brain and computers including robots or other devices to help individuals with severe motor disabilities. The classification of motor and mental imagery electroencephalogram (EEG) signals is complicated because these signals are usually case-specific and distinct models must be trained for each subject to process and classify his/her EEG signals. Moreover, in BCI systems EEG signals are processed online, so the time latency must be very low. In this paper, we have proposed a method based on signal-to-image conversion to investigate image processing techniques in the pair-wise classification of motor and mental imagery EEG signals. We first decomposed EEG signals of each trial into four sub-bands. Then, for each sub-band, we converted EEG time series to 2-dimensional (2D) images using covariance between signals of all channels. Then, statistical, textural and PCA-based features were extracted from these images and fed to a support vector machine (SVM) classifier. Our results were promising in the offline processing and achieved an average classification accuracy of 79.57%.

Epilepsy is a persistent neurological condition of the brain in which the activity of the brain goes out of normal state. Classification and Analysis of EEG signal is the early approach for epilepsy diagnosis. During this paper, we have a tendency to propose an EEG signal classification approach based on Support Vector Machine (SVM) classifier. In extracting features from the raw EEG data we applied the Hilbert Transform method and used its coefficients. Then, after the PCA dimension reduction a two-class SVM classifier is used for EEG signals automatic classification, one class for healthy subjects and another for subjects with epilepsy. In SVM classifier we need to divide the EEG signals into a training dataset and testing dataset for classification. We have used five sets of EEG signals which are publicly accessible on EEG time series database. The evaluation and comparison of SVM based classifier with two other classification methods such as KNN and LVQ based classifier was done. The average classification accuracy of our study is 95.33%.

Using electroencephalogram (EEG) signals to control intelligent wheelchairs is one of the new control methods for controlling intelligent wheelchairs. The most serious problem in the control process is recognition and classification of EEG signals, especially a variety of EEG signals. To improve the accuracy of EEG classification, improved-common spatial patterns and a deep-belief network algorithm are proposed and used for recognition and classification of EEG signals. A variety of different EEG signals were collected by an Emotiv EPOC+ EEG collector, and the characteristic signals were extracted by improved-common spatial patterns and identified and classified by a deep-belief network algorithm. Simulation results show that the classification accuracy of improved-common spatial patterns and the deep-belief network algorithm is higher than that of the traditional classification method, and a research perspective is provided for the classification of various EEG signals in the future.

In clinical practice, study of brain functions is fundamental to notice several diseases potentially dangerous for the health of the subject. Electroencephalography (EEG) can be used to detect cerebral disorders but EEG study is often difficult to implement, taking into account the multivariate and non-stationary nature of the signals and the invariable presence of noise. In the field of Signal Processing exist many algorithms and methods to analyze and classify signals reducing and extracting useful information. Support Vector Machine (SVM) based algorithms can be used as classification tool and allow to obtain an efficient discrimination between different pathology and to support physicians while studying patients. In this paper, we report an experience on designing and using an SVM based algorithm to study and classify EEG signals. We focus on Creutzfeldt-Jakob disease (CJD) EEG signals. To reduce the dimensionality of the dataset, principal component analysis (PCA) is used. These vectors are used as inputs for the SVM classifier with two classification classes: pathologic or healthy. The classification accuracy reaches 96.67% and a validation test has been performed, using unclassified EEG data.

Electroencephalogram (EEG) is often used in clinical epilepsy treatment to monitor electrical signal changes in the brain of patients with epilepsy. With the development of signal processing and artificial intelligence technology, artificial intelligence classification method plays an important role in the automatic recognition of epilepsy EEG signals. However, traditional classifiers are easily affected by impurities and noise in epileptic EEG signals. To solve this problem, this paper develops a noise robustness low-rank learning (NRLRL) algorithm for EEG signal classification. NRLRL establishes a low-rank subspace to connect the original data space and label space. Making full use of supervision information, it considers the local information preservation of samples to ensure the low-rank representation of within-class compactness and between-classes dispersion. The asymmetric least squares support vector machine (aLS-SVM) is embedded into the objective function of NRLRL. The aLS-SVM finds the maximum quantile distance between the two classes of samples based on the pinball loss function, which further improves the noise robustness of the model. Several classification experiments with different noise intensity are designed on the Bonn data set, and the experiment results verify the effectiveness of the NRLRL algorithm.

By 2021, WHO projects over a billion incapacitated people, with 20% facing daily functional impairments.Brain-Computer Interface (BCI) offers effortless machine control via direct brain-computer interaction, with Motor Imagery (MI) Electroencephalogram (EEG) as the key BCI foundation.The MI EEG signals were collected from the BNCI horizon2020 database for nine participants.The MI EEG data includes four tasks: imaginative movement of the left hand, right hand, feet, and tongue.There are 22 EEG channels with a sampling rate of 250Hz in the data.The MI EEG signals were band-pass filtered with a lower cut-off frequency of 0.5 Hz and an upper cut-off frequency of 100 Hz.Based on the energy count threshold approach (ECTA) nine channels were identified as dominating channels from the filtered MI EEG signals.Energy values for each channel were extracted in the ECTA method for the 3-sec window.And if the energy value of a channel for a particular window is greater than 60% of the maximum channel's energy, then the energy count value will be incremented by one.Finally whichever channels had larger energy counts were identified as a dominant channel.On these nine dominant MI EEG signals discrete wavelet transform using Daubechies 4 mother wavelet a four-level decomposition is applied, and Mu and beta rhythms were extracted.For a 3-sec window from the nine dominant channels, the energy and entropy feature values from the Mu and Beta rhythms were extracted.From the extracted features, 80% of the data is used for training Linear Discriminant Analysis (LDA) and Support Vector Machine (SVM) and 20% for testing classifier models.Both the models performed well on the test data and the results obtained had a highest accuracy 91.72.7 for subject-9 and these results were compared with the existing methods.The obtained results of MI EEG signals classification using BCI holds potential for revolutionizing assistive technology, stroke rehabilitation, virtual reality gaming,