Classification technique for real-time emotion detection using machine learning models

Anemia is one of the common adverse reactions after hip fracture surgery. The traditional method to solve anemia is allogeneic transfusion. However, the transfusion may lead to some complications such as septicemia and fever. So far, few studies have reported roles of machine learning in predicting whether blood transfusion is needed or not after hip fracture surgery. Therefore, the purpose of this study is to develop machine learning models to predict the likelihood of postoperative blood transfusion in patients undergoing hip fracture surgery. This study enrolled 1355 patients who underwent hip fracture surgery at the Affiliated Hospital of Qingdao University from January 2016 to December 2021. Among all patients, 210 cases received postoperative blood transfusion. All patients were randomly divided into a training group and a testing group at a ratio of 7:3. In the training group, univariate and multivariate logistic regression analyses were used to determine independent risk factors for the postoperative transfusion. Then, based on these independent risk factors, tenfold cross-validation method was utilized to develop five machine learning models, including logistic, multilayer perceptron (MLP), extreme gradient boosting (XGBoost), random forest (RF), and support vector machine (SVM). The receiver operating characteristic (ROC) curve, area under ROC curve (AUC), and Matthews correlation coefficient (MCC) were generated to evaluate the performance of the models. Calibration plot and decision curve analysis (DCA) were used to test the performance, stability, and clinical applicability of the models. The models were validated using the testing group; and the ROC curve, MCC, calibration plot, and DCA curves were also generated to validate the performance, stability, and clinical applicability of the models. To further verify the robustness of the model, we randomly grabbed 70% of the samples in the testing set, performed 1000 iterations, and calculated the AUC and confidence interval of the five models. Finally, we used SHapley Additive exPlanations (SHAP) to explain these models. Multivariate logistic regression analysis showed that there were 8 independent risk factors, including age, blood transfusion history, albumin (ALB), globulin (GLO), total bilirubin (TBIL), indirect bilirubin (IBIL), hemoglobin (HB), and blood loss > 200ml. We finally selected five independent risk factors including HB, GLO, age, IBIL, and blood loss > 200ml. Based on these five independent risk factors, we generated six characteristic variables, namely HB, HB × HB, HB × blood loss, GLO × HB, age, age × IBIL, and established five machine learning models using a tenfold cross-validation method. In the training group, the AUC values of logistic, RF, MLP, SVM, and XGB were 0.9320, 0.8911, 0.9327, 0.9225, and 0.8825, respectively, and the average AUC was 0.9122 ± 0.0212. The MCC values were 0.65, 0.77, 0.65, 0.66, and 0.68, respectively, and the calibration plot and DCA performed well. In the testing group the AUC values of logistic, RF, MLP, SVM, and XGB were 0.8483, 0.7978, 0.8576, 0.8598, and 0.8216, respectively. The average AUC was 0.8370 ± 0.0238, and the MCC values were 0.41, 0.35, 0.40, 0.41, and 0.41, respectively. The calibration plot and DCA in the testing group also showed good performance. The AUC values and confidence intervals of the 1000-iteration model were: logistic (AUC, min confidence interval [CI]-max confidence interval [CI] 0.848, 0.804-0.903), RF (AUC, minCI-maxCI 0.797, 0.734-0.857), MLP (AUC, minCI-maxCI 0.858, 0.812-0.902), SVM (AUC, minCI-maxCI 0.859, 0.819-0.910), and XGB (AUC, minCI-maxCI 0.821, 0.764-0.894). The model performed well. Finally, according to SHAP, among all five models, HB played the most important role in model prediction and interpretation. The five models we developed all performed well in predicting the likelihood of blood transfusion after hip fracture surgery. Therefore, we believed that the prediction model based on machine learning had great application prospects in clinical practice, which could help clinicians better predict the risk of blood transfusion after hip fracture surgery.

Indonesia holds vast tourism potential, including Nusa Penida, Bali, renowned for its natural beauty. However, the adoption of modern technology to support tourism promotion and management remains limited. This study aims to compare the performance of Support Vector Machine (SVM) with Radial Basis Function (RBF) kernel and Random Forest algorithms in classifying images of three main tourist attractions in Nusa Penida: Angel’s Billabong, Broken Beach, and Kelingking Beach. The dataset consists of 450 images processed using the Histogram of Oriented Gradients (HOG) method for feature extraction. Two data split scenarios (80:20 and 70:30) were applied to evaluate the algorithms based on accuracy, precision, recall, and F1-score metrics. The experimental results revealed that SVM with RBF kernel outperformed Random Forest in all scenarios, achieving the best results in the 70% training and 30% testing data split with an accuracy of 0.967, precision of 0.969, recall of 0.967, and F1-score of 0.967. While Random Forest demonstrated stable performance, it remained inferior to SVM with RBF kernel. This study concludes that SVM with RBF kernel is superior for image classification tasks, offering opportunities for implementing artificial intelligence technologies to advance the tourism sector in Indonesia.

Chronic hepatitis B (CHB) infection represents a significant global public health issue, often leading to hepatitis B virus (HBV)-related liver cirrhosis (HBV-LC) with poor prognoses. Early identification of HBV-LC risk is essential for timely intervention. This study develops and compares nine machine learning (ML) models to predict HBV-LC risk in CHB patients using routine clinical and laboratory data. A retrospective analysis was conducted involving 777 CHB patients, with 50.45% (392/777) progressing to HBV-LC. Admission data consisted of 52 clinical and laboratory variables, with missing values addressed using multiple imputation. Feature selection utilized Least Absolute Shrinkage and Selection Operator (LASSO) regression and the Boruta algorithm, identifying 24 key variables. The evaluated ML models included XGBoost, logistic regression (LR), LightGBM, random forest (RF), AdaBoost, Gaussian naive Bayes (GNB), multilayer perceptron (MLP), support vector machine (SVM), and k-nearest neighbors (KNN). The data set was partitioned into an 80% training set (n = 621) and a 20% independent testing set (n = 156). Cross-validation (CV) facilitated hyperparameter tuning and internal validation of the optimal model. Performance metrics included the area under the receiver operating characteristic curve (AUC), Brier score, accuracy, sensitivity, specificity, and F1 score. The RF model demonstrated superior performance, with AUCs of 0.992 (training) and 0.907 (validation), while the reconstructed model achieved AUCs of 0.944 (training) and 0.945 (validation), maintaining an AUC of 0.863 in the testing set. Calibration curves confirmed a strong alignment between observed and predicted probabilities. Decision curve analysis indicated that the RF model provided the highest net benefit across threshold probabilities. The SHAP algorithm identified RPR, PLT, HBV DNA, ALT, and TBA as critical predictors. This interpretable ML model enhances early HBV-LC prediction and supports clinical decision-making in resource-limited settings.

Enhancing wastewater treatment efficiency through machine learning-driven effluent quality prediction: A plant-level analysis

Emotion recognition plays a pivotal role in advancing Human-Computer Interaction (HCI) by enabling systems to understand and respond to human emotional states. Among various modalities, Speech Emotion Recognition (SER) stands out as a non-invasive, cost-effective, and temporally efficient approach for detecting emotions. This study leverages the RAVDESS dataset, which provides high-quality audio recordings for emotion classification. The proposed methodology involves preprocessing audio signals to remove noise, extracting temporal and spectral features in both time and frequency domains, and implementing machine learning models for multi-class emotion classification. The study evaluates and compares the performance of several classification models, including Random Forest (RF), Multilayer Perceptron (MLP), Support Vector Machine (SVM), Convolutional Neural Networks (CNN), and Decision Trees (DT). Experimental results demonstrate promising accuracy levels, highlighting the potential of these machine learning techniques in SER. This research contributes to the integration of SER within Brain-Computer Interfaces (BCI) and other emotion-aware applications, paving the way for enhanced interactive systems. Keywords – Speech Emotion Recognition -Machine Learning - Random Forest -Multilayer Perceptron - Support Vector Machine - Convolutional Neural Networks - Decision Tree - RAVDESS Dataset

Machine learning (ML) models offer advantages over process-based models for real-time reservoir operation modelling, yet the impact of input variable selection (IVS) and data pre-processing on model performance remains underexplored. This study investigates various input variables for simulating daily reservoir outflow, using the Sirikit reservoir in Thailand as a case study. The datasets include daily Sirikit storage and inflow, outflow of Bhumibol (neighbouring reservoir), downstream discharge, and temporal factors (month and day of the week). Time series decomposition and correlation analyses were used to assess data relationships. We tested seven ML models: multiple linear regression, support vector machine, K-nearest neighbour, classification and regression tree, random forest, multi-layer perceptron, and recurrent neural network (RNN). The optimal input set comprised the previous day’s storage, inflow from 2 days before to 2 days after, and month. With these inputs, all ML models simulated outflow adequately (KGEtraining = 0.42–1.0 and KGEtesting = 0.46–0.56), with RNN showing the most potential for improvement. Input scaling significantly enhanced model performance, reducing RMSEtraining by 44 m3 s-1 and RMSEtesting by 14 m3 s-1. This study’s novelty lies in its comprehensive insights of IVS and data scaling, highlighting their critical roles in enhancing ML model application for operational reservoir simulations.

Chronic pain around the temporomandibular joint (TMJ) and masticatory muscles is a primary symptom of temporomandibular disorders (TMD). However, the clinical significance of magnetic resonance imaging (MRI) features in predicting TMD-related pain remains unclear. This study aimed to develop and interpret machine learning (ML) models based on MRI characteristics for predicting pain severity in patients with TMD. The present retrospective study included 584 patients with TMD between January 2022 and December 2024, yielding a total of 755 TMJ MRI data sets. Pain severity was classified using the visual analogue scale (VAS). Demographic variables (age, sex) and MRI features-including lesion side, disc position, disc morphology, disc signal, disc perforation, bilaminar zone tear, joint space, joint effusion, condylar movement, bony changes and morphology/signal of the lateral pterygoid muscle-were collected. Eleven ML models based on demographic and MRI features were developed: logistic regression (LR), support vector machine (SVM), random forest (RF), extreme gradient boosting (XGBoost), light gradient boosting machine (LightGBM), adaptive boosting (AdaBoost), gradient boosting classifier (GBC), bagging classifier (BC), extremely randomised trees (ETC), decision tree classifier (DTC) and multilayer perceptron (MLP). Model performance was evaluated using multiple metrics, including the area under the receiver operating characteristic curve (AUC), accuracy, sensitivity, specificity and F1 score. Precision-recall (PR) curves and calibration curves were plotted to assess discrimination and model calibration. Decision curve analysis (DCA) was conducted to evaluate the clinical net benefit across a range of threshold probabilities. Model interpretability was enhanced using Shapley Additive Explanations (SHAP), which quantified the contribution of each feature to individual predictions. Feature selection was conducted based on mean SHAP values, and separate LightGBM models were constructed using the Top 3, 5, and 9 most important features, as well as the full-feature set, for performance comparison. The data set was randomly divided into a training set (n = 604) and a test set (n = 151). Among the 11 ML models, the LightGBM model demonstrated the best predictive performance, with an AUC of 0.899, and was therefore identified as the optimal model. SHAP analysis identified age, disc position and condylar movement as the top three contributing features. Feature selection analysis indicated that selecting the top nine SHAP-ranked variables led to the highest diagnostic performance, with an AUC of 0.829. This study developed an interpretable, high-performing MRI-based ML model incorporating SHAP analysis to integrate imaging and clinical features for objective pain assessment, which may help identify high-risk TMD patients and guide personalised treatment strategies.

Periodontitis is increasingly associated with heart failure, and the goal of this study was to develop and validate a prediction model based on machine learning algorithms for the risk of heart failure in middle-aged and elderly participants with periodontitis. We analyzed data from a total of 2876 participants with a history of periodontitis from the National Health and Nutrition Examination Survey (NHANES) 2009 to 2014, with a training set of 1980 subjects with periodontitis from the NHANES 2009 to 2012 and an external validation set of 896 subjects from the NHANES 2013 to 2014. The independent risk factors for heart failure were identified using univariate and multivariate logistic regression analysis. Machine learning algorithms such as logistic regression, k-nearest neighbor, support vector machine, random forest, gradient boosting machine, and multilayer perceptron were used on the training set to construct the models. The performance of the machine learning models was evaluated using 10-fold cross-validation on the training set and receiver operating characteristic curve (ROC) analysis in the validation set. Based on the results of univariate logistic regression and multivariate logistic regression, it was found that age, race, myocardial infarction, and diabetes mellitus status were independent predictors of the risk of heart failure in participants with periodontitis. Six machine learning models, including logistic regression, K-nearest neighbor, support vector machine, random forest, gradient boosting machine, and multilayer perceptron, were built on the training set, respectively. The area under the ROC for the 6 models was obtained using 10-fold cross-validation with values of 0 848, 0.936, 0.859, 0.889, 0.927, and 0.666, respectively. The areas under the ROC on the external validation set were 0.854, 0.949, 0.647, 0.933, 0.855, and 0.74, respectively. K-nearest neighbor model got the best prediction performance across all models. Out of 6 machine learning models, the K-nearest neighbor algorithm model performed the best. The prediction model offers early, individualized diagnosis and treatment plans and assists in identifying the risk of heart failure occurrence in middle-aged and elderly patients with periodontitis.

647 Background: The primary treatment of most mNSTC is chemotherapy followed by surgery if the residual disease (RD) is >1 cm. However, conventional imaging lacks the specificity to characterize the tissue, often leading to overtreatment. This study hypothesizes that integrating CT-driven radiomics features with plasma miR371 and miR375 will enhance the predictive accuracy of Machine Learning (ML) models to predict teratoma, viable germ cell (vGCT) and fibrosis/necrosis (F/N) in mNSTC patients with RD. Methods: 111 lesions from52 patients, including residual teratoma (n=57), F/N (n=33), vGCT (n=10), and additional seminoma (n=11) for training purposes were included, split into training (N=78) and test cohorts (N=33). Lesions were lymph nodes (n=87), lung (n=21), and brain (n=3) with a median size of 1.6 cm (Q1-Q3 interval=1.2-2.73 cm). 3D Slicer version 5.6.1 was used to segment the RD > 1 cm (short axis) and extract radiomics features. Plasma miRNA levels before resection were measured by RT-PCR. Random Forest (RF), Support Vector Machine (SVM), Gradient Boosting (GB), and CatBoost (CB) ML models were evaluated to define the operating characteristics of radiomics alone (R-only) and in combination with miR371 (371) and/or miR375 (375) levels in predicting teratoma, vGCT and F/N. Results: For predicting teratoma, the best models were RF (R+375 and R+371+375), CB (R+371+375), and GB (R+371 and R+371+375). While adding miR371 or miR375 to R-only slightly improved AUC across models, the best results were achieved with the R+375+371 dataset. CB achieved AUCs ranging from 0.94 to 0.97 in training and 0.81 to 0.93 in test sets, with its highest AUC of 0.93 (95% CI: 0.78-0.97) on the R+375+371 dataset to differentiate all three classes. Similarly, GB demonstrated strong performance, achieving its highest AUC of 0.93 (95% CI: 0.79-0.96) on the R+375+371 dataset (Table). Conclusions: Integration of plasma miR371, miR375 and radiomics improved accuracy of predicting histologies across all ML models. These methods could be used to characterize the histology of RD in mNSTC patients to better inform treatment decisions. Further refinement, including incorporation of histological findings of the primary tumor, will be reported. AUC values of different ML algorithms on training and test sets. TRAINING SET TEST SET Model ±SD R R+375 R+371 R+375+371 Model (95% CI) R R+375 R+371 R+375+371 RF 0.93±0.05 0.95±0.04 0.95±0.03 0.96±0.04 RF 0.8(0.59-0.89) 0.85(0.72-0.93) 0.87(0.76-0.95) 0.91(0.78-0.95) SVM 0.84±0.06 0.84±0.09 0.89±0.11 0.89±0.09 SVM 0.72(0.54-0.80) 0.74(0.56-0.82) 0.83(0.69-0.92) 0.84(0.76-0.94) GB 0.94±0.04 0.91±0.08 0.95±0.05 0.97±0.03 GB 0.84(0.61-0.96) 0.89(0.77-0.97) 0.89(0.79-0.96) 0.93(0.79-0.96) CB 0.95±0.03 0.94±0.03 0.94±0.04 0.97±0.03 CB 0.81(0.6-0.93) 0.86(0.73-0.94) 0.89(0.78-0.97) 0.93(0.78-0.97)

Undernutrition among children under the age of five is a major public health concern, especially in developing countries. This study aimed to use machine learning (ML) algorithms to predict undernutrition and identify its associated factors. Secondary data analysis of the 2017 Multiple Indicator Cluster Survey (MICS) was performed using R and Python. The main outcomes of interest were undernutrition (stunting: height-for-age (HAZ) < -2 SD; wasting: weight-for-height (WHZ) < -2 SD; and underweight: weight-for-age (WAZ) < -2 SD). Seven ML algorithms were trained and tested: linear discriminant analysis (LDA), logistic model, support vector machine (SVM), random forest (RF), least absolute shrinkage and selection operator (LASSO), ridge regression, and extreme gradient boosting (XGBoost). The ML models were evaluated using the accuracy, confusion matrix, and area under the curve (AUC) receiver operating characteristics (ROC). In total, 8564 children were included in the final analysis. The average age of the children was 926 days, and the majority were females. The weighted prevalence rates of stunting, wasting, and underweight were 17%, 7%, and 12%, respectively. The accuracies of all the ML models for wasting were (LDA: 84%; Logistic: 95%; SVM: 92%; RF: 94%; LASSO: 96%; Ridge: 84%, XGBoost: 98%), stunting (LDA: 86%; Logistic: 86%; SVM: 98%; RF: 88%; LASSO: 86%; Ridge: 86%, XGBoost: 98%), and for underweight were (LDA: 90%; Logistic: 92%; SVM: 98%; RF: 89%; LASSO: 92%; Ridge: 88%, XGBoost: 98%). The AUC values of the wasting models were (LDA: 99%; Logistic: 100%; SVM: 72%; RF: 94%; LASSO: 99%; Ridge: 59%, XGBoost: 100%), for stunting were (LDA: 89%; Logistic: 90%; SVM: 100%; RF: 92%; LASSO: 90%; Ridge: 89%, XGBoost: 100%), and for underweight were (LDA: 95%; Logistic: 96%; SVM: 100%; RF: 94%; LASSO: 96%; Ridge: 82%, XGBoost: 82%). Age, weight, length/height, sex, region of residence and ethnicity were important predictors of wasting, stunting and underweight. The XGBoost model was the best model for predicting wasting, stunting, and underweight. The findings showed that different ML algorithms could be useful for predicting undernutrition and identifying important predictors for targeted interventions among children under five years in Ghana.

Background: Dental caries is a prevalent, complex, chronic illness that is avoidable. Better dental health outcomes are achieved as a result of accurate and early caries risk prediction in children, which also helps to avoid additional expenses and repercussions. In recent years, artificial intelligence (AI) has been employed in the medical field to aid in the diagnosis and treatment of medical diseases. This technology is a critical tool for the early prediction of the risk of developing caries. Aim: Through the development of computational models and the use of machine learning classification techniques, we investigated the potential for dental caries factors and lifestyle among children under the age of five. Design: A total of 780 parents and their children under the age of five made up the sample. To build a classification model with high accuracy to predict caries risk in 0–5-year-old children, ten different machine learning modelling techniques (DT, XGBoost, KNN, LR, MLP, RF, SVM (linear, rbf, poly, sigmoid)) and two assessment methods (Leave-One-Out and K-fold) were utilised. The best classification model for caries risk prediction was chosen by analysing each classification model’s accuracy, specificity, and sensitivity. Results: Machine learning helped with the creation of computer algorithms that could take a variety of parameters into account, as well as the identification of risk factors for childhood caries. The performance of the classifier is almost unbiased, making it generalizable. Among all applied machine learning algorithms, Multilayer Perceptron and Random Forest had the best accuracy, with 97.4%. Support Vector Machine with RBF Kernel (with an accuracy of 97.4%) was better than Extreme Gradient Boosting (with 94.9% accuracy). Conclusion: The outcomes of this study show the potential of regular screening of children for caries risk by experts and finding the risk scores of dental caries for any individual. Therefore, in order to avoid dental caries, it is possible to concentrate on each individual by utilizing machine learning modelling.

The prediction of wind energy generation is important to enhance the performance and dependability of renewable energy systems due to the rising demand for wind-generated electricity and advancements in wind energy technology competitiveness. This study leverages advanced machine learning (ML) and some other statistical and deep learning based time series forecasting models to enhance the accuracy of wind energy predictions. This comprehensive analysis includes nine ML models—Linear Regression, Random Forests (RF), Gradient Boosting Machines (GBM), Support Vector Machines (SVM), K-Nearest Neighbors (KNN), AdaBoost, XGBoost, Support Vector Regression (SVR), and Neural Networks—as well as Four time-series forecasting models—ARIMA, Temporal Convolutional Networks (TCNs), Long Short-Term Memory (LSTM) networks and GRU. Each ML model underwent rigorous cross-validation to ensure optimal performance. The assessment criteria utilized here comprised the Mean Squared Error (MSE), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), and the R² Score. It was found that among the nine ML models, Random Forests, GBM and KNN consistently provided superior accuracy and robustness, making them the top choices for wind energy prediction whereas the performance of linear regression, SVM and SVR were very poor for the considered dataset. From the experiment, Random Forest, GBM, and KNN showed the best performance with low MSE values of 0.77, 1.95, and 1.51 respectively, while other models had MSEs above 7.5, with AdaBoost reaching 30. Their RMSEs (0.88, 1.40, 1.23) and MAEs (0.093, 0.73, 0.10) also indicate strong predictive accuracy compared to the rest.In this paper, time series forecasting, TCNs, LSTM and GRU networks showed strong capabilities in capturing temporal dependencies and trends within the wind energy data. Visualization techniques were employed to compare model performances comprehensively, providing clear insights into their predictive power. Therefore, this present study offers a robust framework for researchers and practitioners aiming to leverage machine learning and time series forecasting in the realm of renewable energy prediction.

Diabetic retinopathy (DR) is a prevalent microvascular complication of diabetes mellitus, and early detection is crucial for effective management. Metabolomics profiling has emerged as a promising approach for identifying potential biomarkers associated with DR progression. This study aimed to develop a hybrid explainable artificial intelligence (XAI) model for targeted metabolomics analysis of patients with DR, utilizing a focused approach to identify specific metabolites exhibiting varying concentrations among individuals without DR (NDR), those with non-proliferative DR (NPDR), and individuals with proliferative DR (PDR) who have type 2 diabetes mellitus (T2DM). A total of 317 T2DM patients, including 143 NDR, 123 NPDR, and 51 PDR cases, were included in the study. Serum samples underwent targeted metabolomics analysis using liquid chromatography and mass spectrometry. Several machine learning models, including Support Vector Machines (SVC), Random Forest (RF), Decision Tree (DT), Logistic Regression (LR), and Multilayer Perceptrons (MLP), were implemented as solo models and in a two-stage ensemble hybrid approach. The models were trained and validated using 10-fold cross-validation. SHapley Additive exPlanations (SHAP) were employed to interpret the contributions of each feature to the model predictions. Statistical analyses were conducted using the Shapiro-Wilk test for normality, the Kruskal-Wallis H test for group differences, and the Mann-Whitney U test with Bonferroni correction for post-hoc comparisons. The hybrid SVC + MLP model achieved the highest performance, with an accuracy of 89.58%, a precision of 87.18%, an F1-score of 88.20%, and an F-beta score of 87.55%. SHAP analysis revealed that glucose, glycine, and age were consistently important features across all DR classes, while creatinine and various phosphatidylcholines exhibited higher importance in the PDR class, suggesting their potential as biomarkers for severe DR. The hybrid XAI models, particularly the SVC + MLP ensemble, demonstrated superior performance in predicting DR progression compared to solo models. The application of SHAP facilitates the interpretation of feature importance, providing valuable insights into the metabolic and physiological markers associated with different stages of DR. These findings highlight the potential of hybrid XAI models combined with explainable techniques for early detection, targeted interventions, and personalized treatment strategies in DR management.

Harmful Algal Blooms (HABs), driven by environmental pollution, pose significant threats to water quality, public health, and aquatic ecosystems. This study aims to enhance the prediction of HABs in Lake Erie, part of the Great Lakes system, by utilizing ensemble machine learning (ML) models coupled with explainable artificial intelligence (XAI) for interpretability. Using water quality data from 2013 to 2020, various physical, chemical, and biological parameters were analyzed to predict chlorophyll-a (Chl-a) concentrations, a proxy for algal blooms. The study employed multiple ensemble ML models, including Random Forest (RF), Deep Forest (DF), Gradient Boosting (GB), and XGBoost, and compared their performance against individual models such as Support Vector Machine (SVM), Decision Tree (DT), and Multi-Layer Perceptron (MLP). The findings reveal that ensemble models, particularly XGBoost and Deep Forest (DF), achieve superior predictive accuracy with R² values of 0.8517 and 0.8544, respectively. The application of SHapley Additive exPlanations (SHAP) provided insights into the relative importance of input features, identifying Particulate Organic Nitrogen (PON), Particulate Organic Carbon (POC), and Total Phosphorus (TP) as critical factors influencing Chl-a concentrations. This research demonstrates the effectiveness of integrating ensemble ML models with XAI to improve HAB prediction accuracy and interpretability. The results support the development of proactive water quality management strategies and highlight the potential of advanced ML techniques in environmental monitoring.

Machine learning approach to predict susceptible growth regions of Moringa peregrina (Forssk)