Comparative analysis of classification algorithms on the breast cancer recurrence using machine learning

According to statistics from the Global Burden of Cancer Study (Globocon) of the World Health Organization (WHO), cancer, particularly breast cancer, is a severe health issue in Indonesia with 68,858 new cases and 22,000 deaths recorded in 2020. Ultrasonography (USG) technology is acknowledged as one of the potentials to support early detection, which is vital in reducing mortality from breast cancer. This study focuses on classifying ultrasound images using the Support Vector Machine (SVM) algorithm, GLCM feature extraction, Min-Max normalization, and Mutual Information with SelectKBest Feature Selection. From several experiments using the SVM algorithm with various combinations of parameter values that have been set and different Tests, namely using a Train/Test Split with a proportion of 80/20 and K-Fold Cross Validation, it shows that the SVM algorithm is capable of classifying ultrasound images of breast cancer. into two categories (Benign Tumor and Malignant Tumor) with the same maximum accuracy of 79% after applying the SMOTE Balancing Data technique or without using the Balancing Data technique. As a result, the Support Vector Machine (SVM) algorithm has the potential to be an effective model for identifying breast cancer ultrasound images, both on data from the original set that has not been balanced and data from the set that has been balanced.

To analyze the effect of macular choroidal thickness (MCT) and peripapillary choroidal thickness (PPCT) on the classification of obese and healthy children by comparing the performance of the random forest (RF), support vector machine (SVM), and multilayer perceptrons (MLP) algorithms. Fifty-nine obese children and 35 healthy children aged 6 to 15 years were studied in this prospective comparative study using optical coherence tomography. MCT and PPCT were measured at distances of 500 μm, 1,000 μm, and 1,500 μm from the fovea and optic disc. Three different feature selection algorithms were used to determine the most prominent features of all extracted features. The classification efficiency of the extracted features was analyzed using the RF, SVM, and MLP algorithms, demonstrating their efficacy for distinguishing obese from healthy children. The precision and reliability of measurements were assessed using kappa analysis. The correlation feature selection algorithm produced the most successful classification results among the different feature selection methods. The most prominent features for distinguishing the obese and healthy groups from each other were PPCT temporal 500 μm, PPCT temporal 1,500 μm, PPCT nasal 1,500 μm, PPCT inferior 1,500 μm, and subfoveal MCT. The classification rates for the RF, SVM, and MLP algorithms were 98.6%, 96.8%, and 89%, respectively. Obesity has an effect on the choroidal thicknesses of children, particularly in the subfoveal region and the outer semi-circle at 1,500 μm from the optic disc head. Both the RF and SVM algorithms are effective and accurate at classifying obese and healthy children.

The main problem in producing high accuracy software defect prediction is if the data set has an imbalance class and dichotomous characteristics. The imbalanced class problem can be solved using a data level approach, such as resampling methods. While the problem of software defects predicting if the data set has dichotomous characteristics can be approached using the classification method. This study aimed to analyze the performance of the proposed software defect prediction method to identify the best combination of resampling methods with the appropriate classification method to provide the highest accuracy. The combination of the proposed methods first is the resampling process using oversampling, under-sampling, or hybrid methods. The second process uses the classification method, namely the Support Vector Machine (SVM) algorithm and the Logistic Regression (LR) algorithm. The proposed, tested model uses five NASA MDP data sets with the same number attributes of 37. Based on the t-test, the < = 0.0344 < 0.05 and the > = 3.1524 > 2.7765 which indicates that the combination of the proposed methods is suitable for classifying imbalanced class. The performance of the classification algorithm has also improved with the use of the resampling process. The average increase in AUC values using the resampling in the SVM algorithm is 17.19%, and the LR algorithm is at 7.26% compared to without the resampling process. Combining the three resampling methods with the SVM algorithm and the LR algorithm shows that the best combining method is the oversampling method with the SVM algorithm to software defects prediction in imbalanced class with an average accuracy value of 84.02% and AUC 91.65%.

In this study, a data-driven fault diagnosis method was developed for solid oxide fuel cell (SOFC) systems. First, the complete experimental data was obtained following the design of the SOFC system experiments. Then, principal component analysis (PCA) was performed to reduce the dimensionality of the obtained experimental data. Finally, the fault diagnosis algorithms were designed by support vector machine (SVM) and BP neural network to identify and prevent the reformer carbon deposition and heat exchanger rupture faults, respectively. The research results show that both SVM and BP fault diagnosis algorithms can achieve online fault identification. The PCA + SVM algorithm was compared with the SVM algorithm, BP algorithm, and PCA + BP algorithm, and the results show that the PCA + SVM algorithm is superior in terms of running time and accuracy, the diagnosis accuracy reached more than 99%, and the running time was within 20 s. The corresponding system optimization scheme is also proposed.

Dilihat dari sisi konsumen, ada berbagai aspek yang mempengaruhi konsumen untuk membeli suatu kendaraan bermotor. Hal ini karena masing-masing orang memiliki minat dan kebutuhan yang berbeda. Oleh karena itu, tujuan dari penelitian ini adalah untuk mengetahui kelompok umur dan profesi apa saja yang menjadi pelanggan potensial di SPS Motor Honda Lombok Timur. Metode penelitian yang digunakan adalah metode analitik deskriptif, dimana peneliti mengambil data-data penjualan sepeda motor dari SPS Motor Honda Lombok Timur, yang selanjutnya diolah dan dianalisis menggunakan software Rapidminer 5. Hasil analisis data tersebut selanjutnya dideskripsikan dengan detail mengenai kelompok pelanggan potensial. Berdasarkan analisis yang telah dilakukan, dapat ditarik kesimpulan bahwa kelompok yang termasuk dalam pelanggan potensial dari SPS Motor Honda Lombok Timur adalah kelompok dengan kriteria umur berkisar 33-46 tahun yang berprofesi sebagai wiraswasta dan petani, Hal ini disebabkan karena, pelanggan tersebut memiliki penghasilan dengan usia produktif. Sedangkan kelompok pelanggan yang tidak potensial ada 2 irisan yaitu yang pertama apabila kategori usia produktif tapi tidak memiliki penghasilan dengan rentang umur 17-32 tahun dengan profesi pelajar dan wiraswasta. Kedua yaitu, apabila kategori usia tidak produktif dengan rentang usia 47-73 tahun dan tidak memiliki penghasilan dengan profesi petani dan wiraswata.DOI : 10.29408/jit.v2i2.1447

In order to improve the accuracy of the prediction model of lung tuberculosis, a prediction model of lung tuberculosis based on grayscale mixed nucleus AR-SVM model is proposed in the Thesis. First, early warning model of the incidence trend of lung tuberculosis was constructed by using support vector machine (SVM) algorithm which includes two circumstances. One is that there is no extreme risk preference; the other is that there is extreme risk preference. And the searching was conducted in the optimum sorting process in training set based on SVM algorithm; Secondly, aimed at the problem that early warning of extreme risk preference of SVM model is easily out of order in the prediction of incidence trend of lung tuberculosis, data record of incidence trend of lung tuberculosis was preprocessed by using improved SVM model and SVM algorithm was improved by polynomial kernel SVM, which achieved improvement of prediction performance of autoregression model of sample data; finally, the effectiveness of algorithm is verified by positive analysis.

Background Machine learning (ML) algorithm support vector machine (SVM) performed better than Thrombolysis in Myocardial Infarction (TIMI) score for ASIAN STEMI patients. However, Deep Learning (DL) effectiveness in the multiethnic ASIAN population has yet to be determined. DL has automatic learning of the feature from a given dataset without the need to conduct feature selection. However, the selected features by the algorithm is black box. Identifying features associated with mortality is essential to recognize characteristics of patients with high risk for better patient management. Purpose To develop a DL algorithm for in-hospital mortality in multiethnic STEMI patients using predictors identified from the SVM algorithm. To investigate DL performance constructed using predictors from SVM feature extraction and expert-recommended predictors. Methods We constructed four algorithms; a) DL and SVM algorithms with predictors identified from the SVM variable importance b) DL and SVM using predictors based on expert recommendation. We used registry data from the National Cardiovascular Disease Database of 11397 patient's. Fifty parameters including demographics, cardiovascular risk, medications and clinical variables were considered. The Area under the curve (AUC) is the performance evaluation metric. Algorithms were validated against the TIMI and tested using the same validation data. SVM variable importance with backward elimination was used to select and rank important variables. Results DL algorithms outperform SVM and TIMI on the validation dataset; i) DL with SVM selected predictors (15 predictors, AUC = 0.97), ii) DL with expert-recommended predictors (16 predictors, AUC = 0.96), iii) SVM with selected predictors (15 predictors, AUC = 0.92), iv) SVM with expert-recommended predictors (AUC = 0.89) and TIMI (AUC = 0.82). Common predictors across SVM feature selection, expert-recommendation and TIMI are: age, heart rate, Killip class, fasting blood glucose, systolic blood pressure, comorbid diseases and ST-elevation. SVM feature selection also identified diuretics, PCI and pharmacotherapy drugs as predictors that improve mortality prediction in STEMI patients. Our findings suggest that the TIMI score underestimates patients risk of mortality. DL algorithm using selected predictors classified 35% of nonsurvival patients as high risk (risk probabilities >50%) compared to only 12.7% nonsurvival patients by TIMI (score >5) (Figure below). Conclusions In the ASIAN population, patients with STEMI can be better classified using the DL algorithm compared to the ML and TIMI score. Combining ML feature selection with DL allows the identification of distinct factors in a unique ASIAN population for better mortality prediction than relying solely on an expert recommendation as it is a very subjective approach. Continuous validation on population-specific algorithms using DL and ML is needed before implementing in a real clinical setting. Funding Acknowledgement Type of funding sources: Public grant(s) – National budget only. Main funding source(s): Technology Development Fund 1 TIMI performance on validation setDL performance on validation set

Aim: prediction of coronary disease using novel support vector machine and comparing its accuracy with logistic regression algorithm. Materials and methods: Two social affairs are proposed for predicting the accuracy (%) of coronary disease. To be explicit, the novel supports vector machine and logistic regression algorithms. Here we take 20 samples each for appraisal and compare. The sample size was calculated using G power with pretest power at 80% and the alpha of 0.05 value. Result: The logistic regression gives better precision (87.82%) than the novel support vector machine (SVM) accuracy (81.30%). Thus the real significance of logistic regression is better than novel support vector machine algorithms. Conclusion: From the result, it might be gathered that logistic regression helps in expecting the coronary sickness with more accuracy to appear differently in relation to novel support vector machine algorithms.

Improving forecasts, particularly the accuracy, efficiency, and precision of time-series forecasts, is becoming critical for authorities to predict, monitor, and prevent the spread of the Coronavirus disease. However, the results obtained from the predictive models are imprecise and inefficient because the dataset contains linear and non-linear patterns, respectively. Linear models such as autoregressive integrated moving average cannot be used effectively to predict complex time series, so nonlinear approaches are better suited for such a purpose. Therefore, to achieve a more accurate and efficient predictive value of COVID-19 that is closer to the true value of COVID-19, a hybrid approach was implemented. Therefore, the objectives of this study are twofold. The first objective is to propose intelligence-based prediction methods to achieve better prediction results called autoregressive integrated moving average-least-squares support vector machine. The second objective is to investigate the performance of these proposed models by comparing them with the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine. Our investigation is based on three COVID-19 real datasets, i.e., daily new cases data, daily new death cases data, and daily new recovered cases data. Then, statistical measures such as mean square error, root mean square error, mean absolute error, and mean absolute percentage error were performed to verify that the proposed models are better than the autoregressive integrated moving average, support vector machine model, least-squares support vector machine, and autoregressive integrated moving average-support vector machine. Empirical results using three recent datasets of known the Coronavirus Disease-19 cases in Malaysia show that the proposed model generates the smallest mean square error, root mean square error, mean absolute error, and mean absolute percentage error values for training and testing datasets compared to the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine models. This means that the predicted value of the proposed model is closer to the true value. These results demonstrate that the proposed model can generate estimates more accurately and efficiently. Compared to the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine models, our proposed models perform much better in terms of percent error reduction for both training and testing all datasets. Therefore, the proposed model is possibly the most efficient and effective way to improve prediction for future pandemic performance with a higher level of accuracy and efficiency.

Fusion of diverse data sources for flood extent mapping and risk assessment in Sindh: A comparative study of inundation mapping approaches

BackgroundMachine learning (ML) algorithm support vector machine (SVM) performed better than Thrombolysis in Myocardial Infarction (TIMI) score for ASIAN STEMI patients. However, Deep Learning (DL) effectiveness in the multiethnic ASIAN population has yet to be determined. DL has automatic learning of the feature from a given dataset without the need to conduct feature selection. However, the selected features by the algorithm is black box. Identifying features associated with mortality is essential to recognize characteristics of patients with high risk for better patient management.PurposeTo develop a DL algorithm for in-hospital mortality in multiethnic STEMI patients using predictors identified from the SVM algorithm. To investigate DL performance constructed using predictors from SVM feature extraction and expert-recommended predictors.MethodsWe constructed four algorithms; a) DL and SVM algorithms with predictors identified from the SVM variable importance b) DL and SVM using predictors based on expert recommendation. We used registry data from the National Cardiovascular Disease Database of 11397 patient's. Fifty parameters including demographics, cardiovascular risk, medications and clinical variables were considered. The Area under the curve (AUC) is the performance evaluation metric. Algorithms were validated against the TIMI and tested using the same validation data. SVM variable importance with backward elimination was used to select and rank important variables.ResultsDL algorithms outperform SVM and TIMI on the validation dataset; i) DL with SVM selected predictors (15 predictors, AUC = 0.97), ii) DL with expert-recommended predictors (16 predictors, AUC = 0.96), iii) SVM with selected predictors (15 predictors, AUC = 0.92), iv) SVM with expert-recommended predictors (AUC = 0.89) and TIMI (AUC = 0.82). Common predictors across SVM feature selection, expert-recommendation and TIMI are: age, heart rate, Killip class, fasting blood glucose, systolic blood pressure, comorbid diseases and ST-elevation. SVM feature selection also identified diuretics, PCI and pharmacotherapy drugs as predictors that improve mortality prediction in STEMI patients. Our findings suggest that the TIMI score underestimates patients risk of mortality. DL algorithm using selected predictors classified 35% of nonsurvival patients as high risk (risk probabilities >50%) compared to only 12.7% nonsurvival patients by TIMI (score >5) (Figure below).ConclusionsIn the ASIAN population, patients with STEMI can be better classified using the DL algorithm compared to the ML and TIMI score. Combining ML feature selection with DL allows the identification of distinct factors in a unique ASIAN population for better mortality prediction than relying solely on an expert recommendation as it is a very subjective approach. Continuous validation on population-specific algorithms using DL and ML is needed before implementing in a real clinical setting.Funding AcknowledgementType of funding sources: Public grant(s) – National budget only. Main funding source(s): Technology Development Fund 1TIMI performance on validation setDL performance on validation set

Abstract. Cloud fraction as a vital component of meteorological satellite products plays an essential role in environmental monitoring, disaster detection, climate analysis and other research areas. Random forest (RF) and multilayer perceptron (MLP) algorithms were used in this paper to retrieve the cloud fraction of AGRI (Advanced Geosynchronous Radiation Imager) on board the Fengyun-4A (FY-4A) satellite based on its full-disk level-1 radiance observation. Corrections have been made subsequently to the retrieved cloud fraction in areas where solar glint occurs using a correction curve fitted with sunglint angle as weight. The algorithm includes two steps: the cloud detection is conducted firstly for each AGRI field of view to identify whether it is clear sky, partly cloudy or overcast within the observation field. Then, the cloud fraction is retrieved for the scene identified as partly cloudy. The 2B-CLDCLASS-lidar cloud fraction product from the CloudSat and CALIPSO active remote sensing satellite is employed as the truth to assess the accuracy of the retrieval algorithm. Comparison with the operational AGRI level-2 cloud fraction product is also conducted at the same time. The results indicate that both the RF and MLP cloud detection models achieved high accuracy, surpassing that of operational products. However, both algorithms demonstrated weaker discrimination capabilities for partly cloudy conditions compared to clear-sky and overcast situations. Specifically, they tended to misclassify fields of view with low cloud fractions (e.g., cloud fraction = 0.16) as clear sky and those with higher cloud fractions (e.g., cloud fraction = 0.83) as overcast. Between the two models, RF exhibited higher overall accuracy. Both RF and MLP models performed well in cloud fraction retrieval, showing lower mean error (ME), mean absolute error (MAE) and root mean square error (RMSE) compared to operational products. The ME for both RF and MLP cloud fraction retrieval models was close to zero, while RF had slightly lower MAE and RMSE than MLP. During daytime, the high reflectance in sunglint areas led to larger retrieval errors for both RF and MLP algorithms. However, after correction, the retrieval accuracy in these regions improved significantly. At night, the absence of visible light observations from the AGRI instrument resulted in lower classification accuracy compared to daytime, leading to higher cloud fraction retrieval errors during nighttime.

Government policy regarding the discourse on the use of renewable energy in electricity, this discourse is widely discussed in the community, especially on social media twitter. The public's response to the implementation of the use of renewable energy varies, there are positive, negative and neutral responses to this government policy. Sentiment analysis is part of Machine Learning which aims to identify responses in the form of text. The data used in this study amounted to 1,367 tweets. The purpose of this study is to determine the sentiment analysis of government discourse related to the use of renewable energy using an optimisation-based Support Vector Machine (SVM) algorithm approach. This research involves several stages including data collection, data pre-processing, experiments and modelling and evaluation. The data is divided into 3 classes, 120 positive, 1221 neutral and 26 negative. In this research, there are five optimisation models used namely Forward Selection, Backward Elimination, Optimised Selection, Bagging and AdaBoost. The results obtained are the use of Optimised Selection (OS) optimisation with the Support Vector Machine (SVM) algorithm obtained an increase in accuracy from 93% to 96%. The increase in the use of SVM using selection optimization obtained the highest increase, because other optimization techniques only reached 1% and 2% of the original results using the SVM algorithm, namely the accuracy value of 93% to 96% (high accuracy). From the research that has been done, it is certainly important to understand public sentiment towards renewable energy policies, especially renewable energy electricity, the hope is that this research will become a reference for the government.

For a commodity, in addition to its quality, its external package is also very essential. This paper briefly introduced the intelligent support vector machine (SVM) algorithm for color design of paper packaging. The features were extracted from photos of packages using scale-invariant feature transform (SIFT), and the intelligent algorithm was trained and tested using photos of paper packaging for ceramic products collected at the ceramic crafts market as a sample set. Two paper package schemes designed in this study were used for further test. The SVM algorithm was compared with the back-propagation (BP) algorithm and the convolutional neural network (CNN) algorithm. The results showed that the three intelligent algorithms could evaluate the color design of paper packages, but the SVM algorithm was more accurate than the BP and CNN algorithms in evaluating the imagery of color design, both for the samples collected in the craft market and for the paper packaging scheme designed in this paper.

Maize (Zea mays subsp. mays) is a staple food crop in the world. Drought is one of the most common abiotic challenges that maize faces when it comes to growth, development, and production. Further knowledge of drought tolerance could aid with maize production. However, there has been less study focused on investigating in depth the drought tolerance of inbred maize lines using artificial intelligence techniques. In this study, multi-layer perceptron (MLP), support vector machine (SVM), genetic algorithm-based multi-layer perceptron (MLP-GA), and genetic algorithm-based support vector machine (SVM-GA) hybrid artificial intelligence algorithms were used for the prediction of drought tolerance and stress tolerance indices in teosinte maize lines. Correspondingly, the gamma test technique was applied to determine efficient input and output vectors. The potential of the developed models was evaluated based on statistical indices and graphical representations. The results of the gamma test based on the least value of gamma and standard error indices show that days of anthesis (DOA), days of silking (DOS), yield index (YI), and gross yield per plant (GYP) information vector arrangements were determined to be an efficient information vector combination for the drought-tolerance index (DTI) as well as the stress-tolerance index (STI). The MLP, SVM, MLP-GA, and SVM-GA algorithms’ results were compared based on statistical indices and visual interpretations that have satisfactorily predict the drought-tolerance index and stress-tolerance index in maize crops. The genetic algorithm-based hybrid models (MLP-GA and SVM-GA) were found to better predict the drought-tolerance index and stress-tolerance index in maize crops. Similarly, the SVM-GA model was found to have the highest potential to forecast the DTI and STI in maize crops, compared to the MLP, SVM, and MLP-GA models.