Comparison of CNN Architectures using RP Algorithm for Burst Signal Detection

Every year, new Convolutional Neural Network (CNN) architectures appear to deal with different problems in the activity of image and video recognition. These architectures usually work along the ImageNet dataset for looking for the best performance of the CNNs without taking into account the video task where they are used. This can represent a problem if the task is Human Action Recognition (HAR) in video, since the CNN architectures are pre-trained with an image dataset that can practically contain any object, while HAR problem requires consecutive frames of people doing actions. To prove the idea that using CNNs pre-trained on an image dataset does not always achieve the best performance on a video dataset and that, therefore, it is worth comparing the performance of different CNNs under similar circumstances for the HAR problem, this work proposes an analysis between eight different CNN architectures. Each one of the CNN was exclusively trained with RGB images, which were extracted from the frames of the different classes of videos of HMDB51 dataset. To make the classification of an activity in video, we average the predictions taking into account the successes. We also made some ensembles with the best performance CNNs to measure the improvement in accuracy. Our results suggest that Xception is a strong baseline model that could be used by the community to make their comparisons of their proposals more robust.

In this paper, we study the performance of variants of well-known Convolutional Neural Network (CNN) architectures on different audio tasks. We show that tuning the Receptive Field (RF) of CNNs is crucial to their generalization. An insufficient RF limits the CNN's ability to fit the training data. In contrast, CNNs with an excessive RF tend to over-fit the training data and fail to generalize to unseen testing data. As state-of-the-art CNN architectures - in computer vision and other domains - tend to go deeper in terms of number of layers, their RF size increases and therefore they degrade in performance in several audio classification and tagging tasks. We study well-known CNN architectures and how their building blocks affect their receptive field. We propose several systematic approaches to control the RF of CNNs and systematically test the resulting architectures on different audio classification and tagging tasks and datasets. The experiments show that regularizing the RF of CNNs using our proposed approaches can drastically improve the generalization of models, out-performing complex architectures and pre-trained models on larger datasets. The proposed CNNs achieve state-of-the-art results in multiple tasks, from acoustic scene classification to emotion and theme detection in music to instrument recognition, as demonstrated by top ranks in several pertinent challenges (DCASE, MediaEval).

Recently, many researches have been conducted on recognition of facial emotion using convolutional neural networks (CNNs), which show excellent performance in computer vision. To obtain a high classification accuracy, a CNN architecture with many parameters and high computational complexity is required. However, this is not suitable for embedded systems where hardware resources are limited. In this paper, we present a lightweight CNN architecture optimized for embedded systems. The proposed CNN architecture has a small memory footprint and low computational complexity. Furthermore, a novel hardware-friendly quantization method that uses only integer-arithmetic is proposed. The proposed hardware-friendly quantization method maps the scale factors to power-of-two terms and replaces multiplication and division operations using scale factors with shift operations. To improve the generalization and classification performance of the CNN, we create the FERPlus-A dataset. This is a new training dataset created using a variety of image processing algorithms. After training with FERPlus-A, quantization has been performed. The size of a quantized CNN parameter is about 0.39 MB, and the number of operations is about 28 M integer operations (IOPs). By evaluating the performance of the quantized CNN that uses only integer-arithmetic on the FERPlus test dataset, the classification accuracy is approximately 86.58%. It achieved higher accuracy than other lightweight CNNs in prior studies. The proposed CNN architecture that uses only integer-arithmetic is implemented on the Xilinx ZC706 SoC platform for real-time facial emotion recognition by applying parallelism strategies and efficient data caching strategies. The FPGA-based CNN accelerator implemented for real-time facial emotion recognition achieves about 10 frame per second (FPS) at 250 MHz and consumes 2.3 W.

Computer vision is becoming an increasingly trendy word in the area of image processing. With the emergence of computer vision applications, there is a significant demand to recognize objects automatically. Deep CNN (convolution neural network) has benefited the computer vision community by producing excellent results in video processing, object recognition, picture classification and segmentation, natural language processing, speech recognition, and many other fields. Furthermore, the introduction of large amounts of data and readily available hardware has opened new avenues for CNN study. Several inspirational concepts for the progress of CNN have been investigated, including alternative activation functions, regularization, parameter optimization, and architectural advances. Furthermore, achieving innovations in architecture results in a tremendous enhancement in the capacity of the deep CNN. Significant emphasis has been given to leveraging channel and spatial information, with a depth of architecture and information processing via multi-path. This survey paper focuses mainly on the primary taxonomy and newly released deep CNN architectures, and it divides numerous recent developments in CNN architectures into eight groups. Spatial exploitation, multi-path, depth, breadth, dimension, channel boosting, feature-map exploitation, and attention-based CNN are the eight categories. The main contribution of this manuscript is in comparing various architectural evolutions in CNN by its architectural change, strengths, and weaknesses. Besides, it also includes an explanation of the CNN’s components, the strengths and weaknesses of various CNN variants, research gap or open challenges, CNN applications, and the future research direction.

Bangla handwritten character recognition is a popular research topic as its difficulty is higher than the recognition of other languages because of multiple formats of compound characters. State of the art Convolutional neural network (CNN) architectures are very much useful in computer vision applications. Some works have been carried out in Bangla handwritten character recognition but most of them either not very efficient or they can not classify a lot of characters. In this work, state of art pre-trained CNN architectures is used to classify 231 different Bangla handwritten characters using CMATERdb dataset. The images were first converted to B&W form with white as the foreground color. The size of the images is reduced to 28 × 28 form. These images are used as input to the CNN architectures. The weights of the state-of-the-art CNN models are kept as it was. The training learning rate was set to 0.001 and categorical cross-entropy as the error function. After 50 epochs, InceptionResNetV2 achieved the best accuracy (96.99%). DenseNet121 and InceptionNetV3 also provided remarkable recognition accuracy (96.55 and 96.20%, respectively). We also considered combination of trained InceptionResNetV2, InceptionNetV3 and DenseNet121 architectures which provided better recognition accuracy (97.69%) than other single CNN architectures but it is not feasible for using as it requires a lot of computation power and memory. The models were tested in the cases where characters look confusing to humans, but all the architectures showed equal capability in recognizing these images. Considering computational complexity, memory and capability of recognizing confused characters, InceptionResNetV2 can be said as the best performing model.

Recognition of human activity based on convolutional neural network has received the interest of researchers in recent years due to its significant improvement in accuracy. A large number of algorithms based on the deep learning approach have been proposed for activity recognition purpose. However, with the increasing advancements in technologies having limited computational resources, it needs to design an efficient deep learning-based approaches with improved utilization of computational resources. This paper presents a simple and efficient 2-Dimensional convolutional neural network (2-D CNN) architecture with very small size convolutional kernel for human activity recognition. The merit of the proposed CNN architecture over standard deep learning architectures is fewer trainable parameters and lesser memory requirement which enables it to train the proposed CNN architecture on low GPU memory-based devices and also works well with smaller as well as larger size datasets. The proposed approach consists of mainly four stages: namely (1) creation of dataset and data augmentation, (2) designing 2-D convolutional neural network (CNN) architecture, (3) the proposed 2-D CNN architecture trained from scratch up to optimum stage, and (4) evaluation of the trained 2-D CNN architecture. To illustrate the effectiveness of the proposed architecture several extensive experiments are conducted on three publicly available datasets, namely IXMAS, YouTube, and UCF101 dataset. The results of the proposed method and its comparison with other state-of-the-art methods [8-12,14,18-26,29-33] demonstrate the usefulness of the proposed method.

In this paper, the Convolutional Neural Network (CNN) architecture, which is one of the deep learning architectures, is used to classify the basic circuit components drawn by hand. During the training and testing stages of the model, a new dataset containing images of 863 circuit components manually drawn by different people is created. The data set contains images of four different classes of circuit components such as resistor, inductor, capacitor and voltage source. All images have been fixed to the same size and converted to grayscale to increase recognition performance and reduce process complexity. In the study, training for four classes is performed with CNN architecture. Based on the CNN architecture, four new CNN models are employed with different the number of layers. The training and validation results of these models are compared separately, the model with the highest training and validation performance is observed with four layer CNN model (CNN-4). This model obtained 84.41% accuracy rate at classification task.

The Part 1 prequel to this review evaluated the evolution of modelling techniques used in evaluation of fruit quality over the past three decades and noted a progression towards the use of artificial neural networks (ANNs) and convolutional neural networks (CNNs). In this review, Part 2, the use of CNNs for NIR fruit quality evaluation is explored, given the success of CNNs in various other fields, such as image, video, speech, and audio processing, and the availability of large (open source) datasets of fruit spectra and reference quality attribute, which is required for the training of CNN models. The review provides an overview of deep learning and the CNN architectures and techniques used in NIR spectroscopy for regression modelling, with advantages and disadvantages identified. Studies using CNN for NIR based fruit quality evaluation are then critically examined. Eight publications have presented on models using the same open-source mango dry matter calibration and test set, enabling inter-method comparisons. CNN models have been demonstrated to be accurate, precise and robust. Techniques of transfer learning for CNN models offer an alternative solution to model updating and calibration transfer methods applied in traditional chemometrics. The review has highlighted crucial areas that require resolution and exploration in this application through future research, including, (i) data requirements for training a CNN (ii) optimal spectral pre-processing for CNN (iii) CNN architecture and hyper-parameter selection and tuning for fruit quality evaluation (iv) CNN model interpretability and explainability. Future studies must conduct clearer comparison to partial least squares (PLS) regression and shallow ANNs to better assess the prospective benefit of using CNN, a more complex model. The potential for visualisation of spectra relevance to the CNN model using techniques such as GradCam, currently employed in visualising 2D-CNN models, remains to be explored.

Although font recognition is a fundamental issue in the field of document analysis and recognition, it was usually ignored in the past. With the development of optical character recognition (OCR), font recognition becomes more and more important. This paper proposed a well-designed convolutional neural network (CNN) architecture for traditional Mongolian font recognition by means of a single word. To be specific, the whole word image is regarded as input of CNN. Hence, the word images should be normalized into the same size before being inputted into CNN. By comparison, an appropriate aspect ratio for the traditional Mongolian word images has been determined. Experimental results demonstrate that the proposed CNN architecture outperforms three classic CNN architectures, including LeNet-5, AlexNet and GoogLeNet. Therefore, the proposed CNN is much more suitable for the task of the traditional Mongolian font recognition in the way of a single word.

Convolutional Neural Networks (CNNs) are used for the sound signal classification successfully due to their capabilities of deep architecture with pooling schemes. Since the pooling methods in CNN work as regularization to minimize the effect of overfitting which further improves the performance of CNN. Various pooling techniques are proposed to enhance the performance of CNN for classification, but mostly all pooling approaches are considered for the classification of images. Sound samples are of a different nature from the static images and the temporal sequences of sounds play a crucial role in the digitalization of sound samples. The presented work of this paper considered the different pooling schemes with convolutional neural networks to improve the classification accuracy for environment sounds. In this approach, two different CNN architectures are implemented and analyzed with various pooling schemes at local and global levels. Further, the paper presented a new pooling scheme at the local and global pooling aspects to improve the performance. This new pooling scheme is considered as max-min difference pooling. The simulated results are obtained on the UrbanSound8k dataset with different optimizers and proposed pooling schemes. The experimental results indicate improved performance of CNN model with max-min difference pooling with global aspect

Aims: This study aimed to explore the effect of training set diversity on the performance of deep learning models for predicting early gastric cancer (EGC) under endoscopy. Methods: Images of EGC and non-cancerous lesions under narrow-band imaging (ME-NBI) and magnifying blue laser imaging (ME-BLI) were retrospectively collected. Training set 1 was composed of 150 non-cancerous and 309 EGC ME-NBI images, training set 2 was composed of 1505 non-cancerous and 309 EGC ME-BLI images, and training set 3 was the combination of training set 1 and 2. Test set 1 was composed of 376 non-cancerous and 1052 EGC ME-NBI images, test set 2 consisted of 529 non-cancerous and 71 EGC ME-BLI images, and test set 3 was the combination of test set 1 and test set 2. Three deep learning models, convolutional neural network (CNN) 1, CNN 2 and CNN 3 (CNN 1, CNN 2 and CNN 3 were independently trained using training set 1, training set 2 and training set 3, respectively), were constructed, and their performances on each test set were respectively evaluated. One hundred and thirty-eight ME-NBI videos and 17 ME-BLI videos were further collected to evaluate and compare the performance of each model in real time. Results: On the whole, the performance of CNN 3 was the best. The accuracy (Acc), sensitivity (Sn), specificity (Sp) and area under the curve (AUC) of test set 1 in CNN 3 were 87.89% (1255/1428), 90.96% (342/376), 86.79% (913/1052) and 94.60%, respectively. The Acc, Sn, Sp and AUC of test set 2 in CNN 3 were 95% (570/600), 97.92% (518/529), 73.24% (52/71) and 90.93% respectively. The Acc, Sn, Sp and AUC of test set 3 in CNN 3 were 89.99% (1825/2028), 95.03% (860/905), 85.93% (965/1123) and 94.89%, respectively. The performance of CNN 3 was also the best in videos test set. The Acc, Sn and Sp of videos test set in CNN 3 were 91.03% (142/156), 90.58% (125/138) and 94.44% (17/18), respectively. Conclusions: The deep learning model with the most diverse training data has the best diagnostic effect.

In the current study of steganalysis, Convolutional Neural Network (CNN) have attracted many scholars’ attention. Recently, some effective CNN architectures have been proposed with better results than traditional Rich Models with Ensemble Classifiers. Inspired by the idea that Rich Models use various types of sub-models to enlarge different characteristics between cover and stego features, a scheme based on multi-channels filtered residuals is proposed for digital image steganalysis in this paper. This paper mainly focus on the stage of image processing, 3 high-pass filtered image residuals are fed to a deep CNN architecture to make full use of the great nonlinear curve fitting capability. As known, deep learning is powerful in pattern recognition, most previous networks only use single type of filtered residuals in steganalysis, varied high-pass filtered residuals can offer stronger features for CNN in this paper. After filtering, the residuals are superposed into a multi-channels residual map before training, this measure can involve a joint optimization of CNN’s parameters. But single residual map has no such effect. The experiment results prove that it’s an efficient way to provide a better detection performance, achieving an accuracy of 82.02% on Cropped-BOSSBase-1.01 dataset.

Classification performance based on ImageNet is the de-facto standard metric for CNN development. In this work we challenge the notion that CNN architecture design solely based on ImageNet leads to generally effective convolutional neural network (CNN) architectures that perform well on a diverse set of datasets and application domains. To this end, we investigate and ultimately improve ImageNet as a basis for deriving such architectures. We conduct an extensive empirical study for which we train 500 CNN architectures, sampled from the broad AnyNetX design space, on ImageNet as well as 8 additional well-known image classification benchmark datasets from a diverse array of application domains. We observe that the performances of the architectures are highlydataset dependent. Some datasets even exhibit a negative error correlation with ImageNet across all architectures. We show how to significantly increase these correlations byutilizing ImageNet subsets restricted to fewer classes. These contributions can have a profound impact on the way we design future CNN architectures and help alleviate the tilt we see currently in our community with respect to over-reliance on one dataset.

Advanced driver assistance systems (ADASs) and autonomous vehicles are expected to increase safety, lower energy and fuel consumption, and lower pollutants from road traffic. The advanced driver assistance system’s major features include lane detection and tracking. Finding color line marks on the road is the technique of lane detection. The process of lane tracking aims to help the vehicle continue traveling along a predetermined course. Hence, automatic detection of lanes using convolutional neural networks (CNNs) models has gained popularity in the current economic development. This paper also aims at detecting various objects using convolutional neural networks. In this work, we offer object classification and detection, a demanding topic in computer vision and image processing. As a result, we deployed convolutional neural networks on the Keras platform with TensorFlow support. The experimental results illustrate the amount of time needed to train, test, and generate the model using a constrained computing environment. Here, we trained the system for about 80 images which have taken a couple of seconds to detect with better accuracy. Traffic sign recognition is carried out, which is a significant area of research in ADAS. It is crucial for driverless vehicles and is frequently used to read stationary or moving road signs along the side of the road. A comprehensive recognition system is made up of traffic sign detection (TSD) and categorization (TSC). The paper also aimed at traffic sign recognition, which is crucial to consider, because traffic sign recognition is typically applied to portable devices. The model’s detection accuracy is ensured as long as the speed is maintained. The model developed in this study is 99.89% accurate.

Image recognition focused on convolution neural networks (CNN) in various areas of computer vision and image processing has recently proved to deliver state of the art output. Nonetheless, applying deep CNN to an NR-IQA remains a long-standing challenge owing to crucial challenges, i.e. the absence of a testing framework. The CNN test has not yet been performed. In this paper suggested a NR-IQA system focused on CNN which can solve the problem effectively. The approach suggested the DIQA divides the NR-IQA into two stages: 1 analytical portion of the illusion, and 2 one subjective component of the visual system. In the first step, the CNN learns to forecast the objective error map and then in the second phase the algorithm is able to predict subjective values. In addition, we are introducing a reliability chart to supplement the inaccuracy of the objective error map in the homogenous area. To further improve the accuracy, two simple handmade features were used. Therefore, we suggest a way to show graphs of perception errors and examine what the deep CNN model has experienced. The DIQA received the most sophisticated precision on the different databases in the experiments.