Composite Kernels for Support Vector Classification of Hyper-Spectral Data

Cancer is a threatening disease for the human race affecting most people around the world. The topmost reason for cancer demise across the globe is lung cancer and therefore there were many algorithms applied in predicting the survival rate of lung cancer patients. As a result of which the survival rate of lung cancer patients is increasing gradually. Support Vector Machine (SVM) technique have high accuracy than other technique in prediction. The performance of the SVM algorithm depends on the kernel function. In this paper, a comparison of three different kernel functions predicting the survival rate of a lung cancer patient with an efficient normalization technique is studied. Experiments are conducted in the dataset obtained from Cancer Imaging Archive (TCIA). Along with SVM kernel functions, five machine learning techniques were also used in predicting the survival rate of lung cancer. RBF_SVM with normalized data produced high accuracy of 97.72% compared to another algorithm. Various performance metrics such as accuracy, precision, recall, F1 score are used to evaluate the performance of the SVM kernel function.

ABSTRACTIn this article, an innovative classification framework for hyperspectral image data, based on both spectral and spatial information, is proposed. The main objective of this method is to improve the accuracy and efficiency of high-resolution land-cover mapping in urban areas. The spatial information is obtained by an enhanced marker-based minimum spanning forest (MMSF) algorithm. A pixel-based support vector machine (SVM) algorithm is first used to classify the hyperspectral image data, then the enhanced MMSF algorithm is applied in order to increase the accuracy of less accurately classified land-cover types. The enhanced MMSF algorithm is used as a binary classifier. These two classes are the low-accuracy class and remaining classes. Finally, the SVM algorithm is trained for classes with acceptable accuracy. In the proposed approach, namely MSF-SVM, the markers are extracted from the classification maps obtained by both SVM and watershed segmentation algorithms, and are then used to build the MSF. Three benchmark hyperspectral data sets are used for the assessment: Berlin, Washington DC Mall, and Quebec City. Experimental results demonstrate the superiority of the proposed approach compared with SVM and the original MMSF algorithms. It achieves approximately 5, 6, and 7% higher rates in kappa coefficients of agreement in comparison with the original MMSF algorithm for the Berlin, Washington DC Mall, and Quebec City data sets, respectively.

This study developed a methodology that can use real-time strain data for the assessment of scaffolding safety conditions. The researchers identified 23 safety cases of individual member failure with generic global failure for a four-bay, three-story scaffold model and used scaffold member strain values to identify potential failure cases. A computer simulation on the scaffold model generated the strain datasets required for classification with a support vector machine (SVM). The SVM classification demonstrated a stable prediction accuracy after training with a certain number of strain datasets. Furthermore, the 2nd order polynomial kernel function resulted in better prediction compared to other SVM kernel functions. These results imply that the real-time assessment of scaffolding structures is possible with a limited number of training data for machine-learning classification.

Health monitoring and prognostics of axial piston pump is very helpful for the safety of aerial hydraulic system. Directing to the difficulties of measuring the wear loss between the valve plate and cylinder barrel, this paper presents a hybrid prediction method based on EMD (Empirical Mode Decomposition) and SVM (Support Vector Machine), in which EMD is used to get the pump's health state and PSO (Particle Swarm Optimization)-SVM is used to make a prediction for the pump's remaining useful lifetime. Oil-return flow was selected to indicate the wear condition of pump with several IMFs. SVM was trained by these IMFs, and then be used to predict the oil-return flow one-step ahead or multi-step ahead. In the SVM's training process, PSO was used to search the optimal parameter of SVM's kernel function. Applications show that hybrid prediction method has higher prediction precision and could be applied for the remaining useful lifetime prognostics.

According to statistics from the Global Burden of Cancer Study (Globocon) of the World Health Organization (WHO), cancer, particularly breast cancer, is a severe health issue in Indonesia with 68,858 new cases and 22,000 deaths recorded in 2020. Ultrasonography (USG) technology is acknowledged as one of the potentials to support early detection, which is vital in reducing mortality from breast cancer. This study focuses on classifying ultrasound images using the Support Vector Machine (SVM) algorithm, GLCM feature extraction, Min-Max normalization, and Mutual Information with SelectKBest Feature Selection. From several experiments using the SVM algorithm with various combinations of parameter values that have been set and different Tests, namely using a Train/Test Split with a proportion of 80/20 and K-Fold Cross Validation, it shows that the SVM algorithm is capable of classifying ultrasound images of breast cancer. into two categories (Benign Tumor and Malignant Tumor) with the same maximum accuracy of 79% after applying the SMOTE Balancing Data technique or without using the Balancing Data technique. As a result, the Support Vector Machine (SVM) algorithm has the potential to be an effective model for identifying breast cancer ultrasound images, both on data from the original set that has not been balanced and data from the set that has been balanced.

Fuzzy quasi-linear SVM classifier: Design and analysis

In this study, a data-driven fault diagnosis method was developed for solid oxide fuel cell (SOFC) systems. First, the complete experimental data was obtained following the design of the SOFC system experiments. Then, principal component analysis (PCA) was performed to reduce the dimensionality of the obtained experimental data. Finally, the fault diagnosis algorithms were designed by support vector machine (SVM) and BP neural network to identify and prevent the reformer carbon deposition and heat exchanger rupture faults, respectively. The research results show that both SVM and BP fault diagnosis algorithms can achieve online fault identification. The PCA + SVM algorithm was compared with the SVM algorithm, BP algorithm, and PCA + BP algorithm, and the results show that the PCA + SVM algorithm is superior in terms of running time and accuracy, the diagnosis accuracy reached more than 99%, and the running time was within 20 s. The corresponding system optimization scheme is also proposed.

Dilihat dari sisi konsumen, ada berbagai aspek yang mempengaruhi konsumen untuk membeli suatu kendaraan bermotor. Hal ini karena masing-masing orang memiliki minat dan kebutuhan yang berbeda. Oleh karena itu, tujuan dari penelitian ini adalah untuk mengetahui kelompok umur dan profesi apa saja yang menjadi pelanggan potensial di SPS Motor Honda Lombok Timur. Metode penelitian yang digunakan adalah metode analitik deskriptif, dimana peneliti mengambil data-data penjualan sepeda motor dari SPS Motor Honda Lombok Timur, yang selanjutnya diolah dan dianalisis menggunakan software Rapidminer 5. Hasil analisis data tersebut selanjutnya dideskripsikan dengan detail mengenai kelompok pelanggan potensial. Berdasarkan analisis yang telah dilakukan, dapat ditarik kesimpulan bahwa kelompok yang termasuk dalam pelanggan potensial dari SPS Motor Honda Lombok Timur adalah kelompok dengan kriteria umur berkisar 33-46 tahun yang berprofesi sebagai wiraswasta dan petani, Hal ini disebabkan karena, pelanggan tersebut memiliki penghasilan dengan usia produktif. Sedangkan kelompok pelanggan yang tidak potensial ada 2 irisan yaitu yang pertama apabila kategori usia produktif tapi tidak memiliki penghasilan dengan rentang umur 17-32 tahun dengan profesi pelajar dan wiraswasta. Kedua yaitu, apabila kategori usia tidak produktif dengan rentang usia 47-73 tahun dan tidak memiliki penghasilan dengan profesi petani dan wiraswata.DOI : 10.29408/jit.v2i2.1447

In order to improve the accuracy of the prediction model of lung tuberculosis, a prediction model of lung tuberculosis based on grayscale mixed nucleus AR-SVM model is proposed in the Thesis. First, early warning model of the incidence trend of lung tuberculosis was constructed by using support vector machine (SVM) algorithm which includes two circumstances. One is that there is no extreme risk preference; the other is that there is extreme risk preference. And the searching was conducted in the optimum sorting process in training set based on SVM algorithm; Secondly, aimed at the problem that early warning of extreme risk preference of SVM model is easily out of order in the prediction of incidence trend of lung tuberculosis, data record of incidence trend of lung tuberculosis was preprocessed by using improved SVM model and SVM algorithm was improved by polynomial kernel SVM, which achieved improvement of prediction performance of autoregression model of sample data; finally, the effectiveness of algorithm is verified by positive analysis.

The excellent generalisation ability of the Support Vector Machine (SVM) algorithm has made it one of the most popular statistical learning theories in supervised machine learning. The classification accuracy and effectiveness of SVM is highly sensitive to the kernel function used during the training process. This paper compares linear, polynomial, and Gaussian kernel functions for evaluating their contribution to SVM for accurately and effectively classifying healthy and faulty status of rotating machinery. A three-phase induction motor and a four-stroke diesel engine were considered as the machinery for this study. Acoustic signals coming from these machines were collected using microphones and Fast Fourier Transform (FFT) was used to extract the magnitudes of the dominant frequency components of the signals. The extracted ominant frequency components are considered as acoustic signatures and their variations are taken as condition monitoring parameters. The results show that with the second-order polynomial kernel function, SVM achieved an accuracy of at least 2.4% greater than the other kernel functions with 1.2% less training time. Furthermore, the third-order polynomial kernel function found to be the second best choice.

Aim: prediction of coronary disease using novel support vector machine and comparing its accuracy with logistic regression algorithm. Materials and methods: Two social affairs are proposed for predicting the accuracy (%) of coronary disease. To be explicit, the novel supports vector machine and logistic regression algorithms. Here we take 20 samples each for appraisal and compare. The sample size was calculated using G power with pretest power at 80% and the alpha of 0.05 value. Result: The logistic regression gives better precision (87.82%) than the novel support vector machine (SVM) accuracy (81.30%). Thus the real significance of logistic regression is better than novel support vector machine algorithms. Conclusion: From the result, it might be gathered that logistic regression helps in expecting the coronary sickness with more accuracy to appear differently in relation to novel support vector machine algorithms.

Fusion of diverse data sources for flood extent mapping and risk assessment in Sindh: A comparative study of inundation mapping approaches

The recognition of coal and gangue is the premise and foundation of coal gangue intelligent sorting. Adaptive boosting (AdaBoost) algorithm-based coal gangue identification has not been studied in depth. This paper proposed a coal gangue image recognition algorithm and a strong classifier based on the AdaBoost algorithm with a genetic algorithm (GA)-optimized support vector machine (SVM). One thousand coal gangue images were collected on-site and expanded to five thousand via rotation and exposure adjustment. The 12 gray-level gradient co-occurrence matrix texture features of the images were extracted to construct a feature vector, establishing the training dataset and test dataset. Selection of the SVM kernel function, the GA optimization parameter setting, and the base classifier number was discussed. The coal gangue image recognition effects of the AdaB-GA-SVM classifier and the other strong classifiers with different base SVM classifiers were investigated. The results indicated that the recognition accuracy of GA-SVM was the best when the kernel function of SVM was RBF and the population number, crossover probability, and mutation probability were 80, 0.9, and 0.005, respectively. The AdaB-GA-SVM classifier has excellent identification and effective classification performance with the highest accuracy of 95%, a precision rate of 92.8%, recall rate of 97.3%, and KS values of 0.79.

Government policy regarding the discourse on the use of renewable energy in electricity, this discourse is widely discussed in the community, especially on social media twitter. The public's response to the implementation of the use of renewable energy varies, there are positive, negative and neutral responses to this government policy. Sentiment analysis is part of Machine Learning which aims to identify responses in the form of text. The data used in this study amounted to 1,367 tweets. The purpose of this study is to determine the sentiment analysis of government discourse related to the use of renewable energy using an optimisation-based Support Vector Machine (SVM) algorithm approach. This research involves several stages including data collection, data pre-processing, experiments and modelling and evaluation. The data is divided into 3 classes, 120 positive, 1221 neutral and 26 negative. In this research, there are five optimisation models used namely Forward Selection, Backward Elimination, Optimised Selection, Bagging and AdaBoost. The results obtained are the use of Optimised Selection (OS) optimisation with the Support Vector Machine (SVM) algorithm obtained an increase in accuracy from 93% to 96%. The increase in the use of SVM using selection optimization obtained the highest increase, because other optimization techniques only reached 1% and 2% of the original results using the SVM algorithm, namely the accuracy value of 93% to 96% (high accuracy). From the research that has been done, it is certainly important to understand public sentiment towards renewable energy policies, especially renewable energy electricity, the hope is that this research will become a reference for the government.

For a commodity, in addition to its quality, its external package is also very essential. This paper briefly introduced the intelligent support vector machine (SVM) algorithm for color design of paper packaging. The features were extracted from photos of packages using scale-invariant feature transform (SIFT), and the intelligent algorithm was trained and tested using photos of paper packaging for ceramic products collected at the ceramic crafts market as a sample set. Two paper package schemes designed in this study were used for further test. The SVM algorithm was compared with the back-propagation (BP) algorithm and the convolutional neural network (CNN) algorithm. The results showed that the three intelligent algorithms could evaluate the color design of paper packages, but the SVM algorithm was more accurate than the BP and CNN algorithms in evaluating the imagery of color design, both for the samples collected in the craft market and for the paper packaging scheme designed in this paper.