Comprehensive approach for scour modelling using artificial intelligence

A simultaneous survey of several types of droughts, such as meteorological, hydrological, agricultural, economic, and social droughts, is possible by using the multivariate standardized precipitation index (MSPI). In this study, the accuracy of four artificial intelligence (AI) methods, including the generalized regression neural network (GRNN), least-square support vector machine (LSSVM), group method of data handling (GMDH), and adaptive neuro-fuzzy inference systems with fuzzy C-means clustering (ANFIS-FCM), were investigated in forecasting the MSPI of three synoptic stations (Jolfa, Kerman, and Tehran) located in the arid-cold climate of Iran. The data used was monthly precipitation and belongs to a 30-year period (1988–2017). MSPI values were calculated in five time windows, including the following: 3–6 (MSPI3–6), 6–12 (MSPI6–12), 3–12 (MSPI3–12), 12–24 (MSPI12–24), and 24–48 (MSPI24–48). The period of 1988–2016 was considered for training (75%) and testing (25%), and 2017 (12 months) was used for long-term forecasting. The methods were evaluated by the root mean square error (RMSE), mean absolute error (MAE), Willmott index (WI), and Taylor diagram. In the short-term forecasting phase, results showed that the methods had their best performances in forecasting multivariate drought types of groundwater hydrology-economic-social (MSPI24–48), agricultural-groundwater hydrology (MSPI12–24), surface hydrology-agricultural (MSPI6–12), soil moisture-surface hydrology-agricultural (MSPI3–12), and soil moisture-surface hydrology (MSPI3–6), respectively. Also, among the mentioned methods, the weakest accuracy was reported for GRNN with an RMSE=0.673, MAE=0.499, and WI=0.750 (related to MSPI3–6 of the Kerman station); the most accurate performance resulted from the GMDH with RMSE=0.097, MAE=0.074, and WI=0.989 (related to MSPI24–48 of the Jolfa station). In spite of the acceptable performance of the models in short-term forecasting, by increasing the forecasting horizons, the models’ errors were increased in the long-term forecasting phase. The models could have acceptable long-term forecasts for just two months (or in some exceptional cases, three months) ahead. Further, according to the investigations, it can be shown that the methods show better performances in mountainous arid-cold regions, compared to desert arid-cold regions. As a theoretical study of multivariate drought forecasting, the AIs have promising results, and this research can be extended for the other regions.

Evaluation of artificial neurocomputing algorithms and their metacognitive robustness in predictive modeling of fuel consumption rates during tillage

The potential of several predictive models including multiple model-artificial neural network (MM-ANN), multivariate adaptive regression spline (MARS), support vector machine (SVM), multi-gene genetic programming (MGGP), and ‘M5Tree’ were assessed to simulate the pan evaporation in monthly scale (EPm) at two stations (e.g. Ranichauri and Pantnagar) in India. Monthly climatological information were used for simulating the pan evaporation. The utmost effective input-variables for the MM-ANN, MGGP, MARS, SVM, and M5Tree were determined using the Gamma test (GT). The predictive models were compared to each other using several statistical criteria (e.g. mean absolute percentage error (MAPE), Willmott's Index of agreement (WI), root mean squared error (RMSE), Nash-Sutcliffe efficiency (NSE), and Legate and McCabe’s Index (LM)) and visual inspection. The results showed that the MM-ANN-1 and MGGP-1 models (NSE, WI, LM, RMSE, MAPE are 0.954, 0.988, 0.801, 0.536 mm/month, 9.988% at Pantnagar station, and 0.911, 0.975, 0.724, and 0.364 mm/month, 12.297% at Ranichauri station, respectively) with input variables equal to six were more successful than the other techniques during testing period to simulate the monthly pan evaporation at both Ranichauri and Pantnagar stations. Thus, the results of proposed MM-ANN-1 and MGGP-1 models will help to the local stakeholders in terms of water resources management.

The study uses the comparison of Group Method of Data Handling (GMDH)-type neural network algorithm with Vector error correction model to predict the value of FDI on the basis of accuracy of prediction and to model the determinants of FDI in Pakistan. It was estimated in the times series data during the time period 1971-2013 and the time period 2014-2018 has been utilized to predict FDI. The Augmented Dickey-Fuller (ADF) test suggests that all variables data are of I (1) and Johansen co-integration test proved nexus of the variables FDI and its determinants in the long run. Nonetheless, the error correction-term of the vector error correction model (VECM) indicates that around 3 % of cumulative disequilibrium was expunged in every year in Pakistan. This paper compares two new methods Group Method of Data Handling (GMDH) Neural Network Algorithm and Vector Error Correction Model (VECM) in an attempt to obtain the more useful one based on accuracy of analysis when making predictions. Whereas, the effectiveness of VECM is then compared with a non parametric GMDH-like type neural network. An evaluation of forecasting model accuracies in terms of FDI was done using Root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE) and Diebold Mariano (DM) test. The empirical outcomes are a clear indication that Group Method of Data Handling GMDH-type of neural network algorithm did very well in comparison with the vector error correction model based on forecasting.

Summary Many methods have been developed to determine the solution gas/oil ratio (Rs), starting with experiments, followed by empirical correlations establishments, and recently with machine learning applications receiving much interest due to their ability to produce precise results compared with empirical correlations. In this paper, the group method of data handling (GMDH) and the enhanced GMDH based on discrete differential evolution (GMDH-DDE) are used for the first time to estimate the Rs and to provide a correlation to the laboratory measured Rs from bubblepoint pressure (Pb), oil API gravity (API), gas-specific gravity (γg), and reservoir temperature (T) without crude oil properties. These two methods are compared with backpropagation neural networks (BPNN). The reason for using the hybrid GMDH (GMDH-DDE) is to overcome the drawbacks of the GMDH, such as the method used to calculate neuron weights (i.e., quadratic polynomial transfer function), which seems to have inaccuracies. Also, in selecting model inputs, the GMDH tends to choose the most appropriate inputs for the model; however, the selection criteria are not straightforward and may affect the final results. Furthermore, the GMDH has a multicollinearity problem, affecting model coefficient stability and overfitting problems, etc. A total of 420 data sets from the Mpyo oil field were used, with 70% used for training and 30% used for testing. According to the findings, the GMDH-DDE outperformed both the GMDH and BPNN. In comparison with the GMDH and BPNN, the GMDH-DDE has a higher correlation coefficient (R), lower root-mean-square error (RMSE), and lower mean absolute error (MAE). During training, R, RMSE, and MAE were 0.9849, 0.090, and 0.010, respectively, and during testing, R = 0.9603, RMSE = 0.290, and MAE = 0.017. The second-best technique (GMDH) produces R, RMSE, and MAE values of 0.9611, 0.122, and 0.032 in training, and R = 0.9438, RMSE = 0.349, and MAE = 0.055 in testing. Furthermore, the GMDH-DDE used less computational time (1.32 seconds) compared with the GMDH (2.01 seconds) and BPNN (4.96 seconds), proving that the GMDH-DDE has accurate and fast convergence compared with the GMDH and BPNN. These findings show that the GMDH-DDE and GMDH can be adopted as alternative methods for predicting the Rs.

Oilseeds have been the backbone of India’s agricultural economy since long. Oilseed crops play the second most important role in Indian agricultural economy, next to food grains, in terms of area and production. Oilseeds production in India has increased with time, however, the increasing demand for edible oils necessitated the imports in large quantities, leading to a substantial drain of foreign exchange. The need for addressing this deficit motivated a systematic study of the oilseeds economy to formulate appropriate strategies to bridge the demand-supply gap. In this study, an effort is made to forecast oilseeds production by using Autoregressive Integrated Moving Average (ARIMA) model, which is the most widely used model for forecasting time series. One of the main drawbacks of this model is the presumption of linearity. The Group Method of Data Handling (GMDH) model has also been applied for forecasting the oilseeds production because it contains nonlinear patterns. Both ARIMA and GMDH are mathematical models well-known for time series forecasting. The results obtained by the GMDH are compared with the results of ARIMA model. The comparison of modeling results shows that the GMDH model perform better than the ARIMA model in terms of mean absolute error (MAE), mean absolute percentage error (MAPE), and root mean square error (RMSE). The experimental results of both models indicate that the GMDH model is a powerful tool to handle the time series data and it provides a promising technique in time series forecasting methods.

Uplift capacity prediction of suction caisson in clay using a hybrid intelligence method (GMDH-HS)

Predicting dam inflow is critical for human life safety, water resource management, and hydroelectric power generation. While machine learning (ML) models address complex, nonlinear hydrological problems, quantum machine learning (QML) offers greater potential to overcome classical computational limits. This study compares a hybrid quantum neural network (HQNN) with the following two classical models: bidirectional CNN-LSTM and support vector regression (SVR). These models were evaluated to predict monthly inflow to the Mile Mughan Dam, a transboundary hydroelectric and irrigation dam located on the Aras River between Azerbaijan and Iran, using a 14-year dataset (2010–2023) under two scenarios. In total, 70% of data was used for training and 30% for testing. The first scenario encompassed meteorological variables plus three months of inflow lags, and the second included inflow lags only. Model performance was assessed using Coefficient of Determination (R2), Root Mean Squared Error (RMSE), Nash–Sutcliffe efficiency (NSE), Mean Absolute Percentage Error (MAPE), and graphical plots. HQNN showed superior performance across all metrics. In Scenario 1, HQNN achieved R2 = 0.915, RMSE = 37.318 MCM, NSE = 0.908, MAPE = 8.343%; CNN-BiLSTM had R2 = 0.867, RMSE = 46.506 MCM, NSE = 0.858, MAPE = 10.795%; SVR had R2 = 0.846, RMSE = 52.372 MCM, NSE = 0.821, MAPE = 12.772%. In Scenario 2, HQNN maintained strong performance (R2 = 0.855, RMSE = 48.56 MCM, NSE = 0.845, MAPE = 9.979%) and outperformed CNN-BiLSTM (R2 = 0.810, RMSE = 56.126 MCM, NSE = 0.793, MAPE = 11.456%) and SVR (R2 = 0.801, RMSE = 60.336 MCM, NSE = 0.761, MAPE = 12.901%). In Scenario 1 and Scenario 2, HQNN increased the prediction accuracy by 19.76% and 13.47%, respectively, compared to the CNN-BiLSTM model. These results confirm HQNN’s reliability in both multivariate and univariate modeling.

Globally, wind energy if properly harnessed, could serve as a source of energy generation in Africa. This study compared the performance of two Machine Learning (ML) algorithms (Linear regression and Random Forest) in predicting wind speed in five major cities in Africa (Yaoundé, Pretoria, Nairobi, Cairo and Abuja). Wind data were collected between January 1, 2000, and December 31, 2022, using the Solar Radiation Data Archive. The data preprocessing was carried out with 80% of the data used for training and 20% for validation. The performance of these ML algorithms was evaluated using Mean Square Error (MSE), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2). The result shows that Nairobi (3.814795 m/s) closely followed by Cairo (3.606453 m/s) has the highest mean wind speed while Yaoundé (1.090512 m/s) has the lowest. Based on the performance metrics used, the two Machine Learning algorithms were competitive. Still, the Linear Regression (LR) algorithm outperformed the Random Forest Algorithm in predicting wind speed in all the selected major African cities. In Yaoundé (RMSE = 0.3892, MAE= 0.3001, MAPE =0.5030), Pretoria (RMSE=1.2339, MAE=0.9480, MAPE=0.7450) Nairobi (RMSE= 0.4223, MAE =0.6499, MAPE =0.1872), Nairobi (RMSE=0.6499, MAE=0.5171, MAPE =0.1872), Cairo (RMSE =1.0909, MAE =0.8544, MAPE =0.3541) and Abuja (RMSE = 0.70245, MAE =0.5441, MAPE= 0.4515) the Linear regression algorithms was found to outperformed Random Forest Regression. Therefore, the Linear regression algorithm is more reliable in predicting wind speed compared with the Random Forest regression.

PurposeThe purpose of this paper is to use Group Method of Data Handling (GMDH)-type artificial neural network to model the affecting factors of housing price in Isfahan city housing market.Design/methodology/approachThis paper presents an accurate model based on GMDH approach to describing connection between housing price and considered affecting factors in case study of Isfahan city based on trusted data that have been collected from 1995 to 2017 for every six months. The accuracy of the model has been evaluated by mean absolute percentage error (MAPE), root mean square error (RMSE) and mean absolute error (MAE) in this case.FindingsDue to the obtained value of MAPE, RMSE and MAE and also their interpretation, accuracy of modelling the factors affecting housing price in Isfahan city housing market using GMDH-type artificial neural network that has been conducted in this paper, is acceptable.Research limitations/implicationsDue to limitation of reliable data availability about affecting factors, selected period is from 1995 to 2017. Accessing to longer periods of reliable data can improve the accuracy of the model.Originality/valueThe key point of this research is reaching to a mathematical formula that accurately shows the relationships between housing price in Isfahan city and effective factors. The simplified formula can help users to use it easily for analysing and describing the status of housing market in Isfahan city of Iran.

BackgroundMore than 79.2 million confirmed COVID-19 cases and 1.7 million deaths were caused by SARS-CoV-2; the disease was named COVID-19 by the World Health Organization. Control of the COVID-19 epidemic has become a crucial issue around the globe, but there are limited studies that investigate the global trend of the COVID-19 pandemic together with each country’s policy measures.ObjectiveWe aimed to develop an online artificial intelligence (AI) system to analyze the dynamic trend of the COVID-19 pandemic, facilitate forecasting and predictive modeling, and produce a heat map visualization of policy measures in 171 countries.MethodsThe COVID-19 Pandemic AI System (CPAIS) integrated two data sets: the data set from the Oxford COVID-19 Government Response Tracker from the Blavatnik School of Government, which is maintained by the University of Oxford, and the data set from the COVID-19 Data Repository, which was established by the Johns Hopkins University Center for Systems Science and Engineering. This study utilized four statistical and deep learning techniques for forecasting: autoregressive integrated moving average (ARIMA), feedforward neural network (FNN), multilayer perceptron (MLP) neural network, and long short-term memory (LSTM). With regard to 1-year records (ie, whole time series data), records from the last 14 days served as the validation set to evaluate the performance of the forecast, whereas earlier records served as the training set.ResultsA total of 171 countries that featured in both databases were included in the online system. The CPAIS was developed to explore variations, trends, and forecasts related to the COVID-19 pandemic across several counties. For instance, the number of confirmed monthly cases in the United States reached a local peak in July 2020 and another peak of 6,368,591 in December 2020. A dynamic heat map with policy measures depicts changes in COVID-19 measures for each country. A total of 19 measures were embedded within the three sections presented on the website, and only 4 of the 19 measures were continuous measures related to financial support or investment. Deep learning models were used to enable COVID-19 forecasting; the performances of ARIMA, FNN, and the MLP neural network were not stable because their forecast accuracy was only better than LSTM for a few countries. LSTM demonstrated the best forecast accuracy for Canada, as the root mean square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE) were 2272.551, 1501.248, and 0.2723075, respectively. ARIMA (RMSE=317.53169; MAPE=0.4641688) and FNN (RMSE=181.29894; MAPE=0.2708482) demonstrated better performance for South Korea.ConclusionsThe CPAIS collects and summarizes information about the COVID-19 pandemic and offers data visualization and deep learning–based prediction. It might be a useful reference for predicting a serious outbreak or epidemic. Moreover, the system undergoes daily updates and includes the latest information on vaccination, which may change the dynamics of the pandemic.

Multi-step daily forecasting of reference evapotranspiration for different climates of India: A modern multivariate complementary technique reinforced with ridge regression feature selection

Stock price forecasting provide valuable insight to the investor to facilitate well-informed investment decision making. The aim of this study is to examine the calendar anomalies i.e. DOW in Pakistan stock exchange though Artificial intelligence techniques. For this purpose, Support vector machine (SVM), Decision Tree (DT) and Artificial Neural Network is used to forecast the daily stock prices. The daily stock prices data of KSE100 index ranges from May,1994 to August 2023 is used as out variable while stock open, close, high and low prices are used as features/input variables. The training and testing ratio was 80:20 means 80% of the data was used in training and the 20% values were utilized for forecasting. To evaluate the accuracy of predictions, mean square error (MSE), root mean square error (RMSE), mean absolute error (MAE)/mean absolute deviation (MAD), mean absolute percent error (MAPE), and R-squared (R^2) are taken as decision criteria. The daily forecasted stock prices show the almost zero error on Tuesday, Wednesday and Thursday in SVM. Decision tree show very low error in actual and forecasted stock prices. Therefore, it is concluded that, the DOW anomalies exist in KSE100 index of PSX. Results show that, SVM can better predict the stock prices than DT and ANN. These results conclude that the forecasted stock prices are much closer to actual daily stock price means the daily stock prices can be forecast in KSE100 index. These finding contradicts the Efficient market hypothesis and conclude that the Pakistan stock exchange (PSX) is weak-form inefficient market.

Unemployment is the most important problem that countries need to solve in their economic development plans. The uncontrolled growth and unpredictability of unemployment are some of the biggest obstacles to economic development. Considering the benefits of technology to human life, the use of artificial intelligence is extremely important for a stable economic policy. This study aims to use machine learning methods to forecast unemployment rates in Turkey on a monthly basis. For this purpose, two different models are created. In the first model, monthly unemployment data obtained from TURKSTAT for the period between 2005 and 2023 are trained with Artificial Neural Networks (ANN) and Support Vector Machine (SVM) algorithms. The second model, which includes additional economic parameters such as inflation, exchange rate, and labor force data, is modeled with the XGBoost algorithm in addition to ANN and SVM models. The forecasting performance of both models is evaluated using various performance metrics such as Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Mean Absolute Percentage Error (MAPE). The findings of the study show how successful artificial intelligence methods are in forecasting economic developments and that these methods can be used in macroeconomic studies. They also highlight the effects of economic parameters such as exchange rates, inflation, and labor force on unemployment and reveal the potential of these methods to support economic decisions. As a result, this study shows that modeling and forecasting different parameter values during periods of economic uncertainty are possible with artificial intelligence technology.

The mechanical characteristics of rock are greatly influenced by hydrochemical corrosion. The chemical corrosion impact and deformation properties of the meso-pore structure of rock under the action of different hydrochemical solutions for the stability evaluation of rock mass engineering are of high theoretical relevance and applied value. Based on actual data, a support vector machine (SVM) rock constitutive model based on artificial bee colony algorithm (ABC) optimization is constructed in this article. The impact of porosity (chemical deterioration), confining pressure, and other aspects is thoroughly examined. It is used to mimic the triaxial mechanical behavior of rock under various hydration conditions, with high nonlinear prediction ability. Simultaneously, the statistical damage constitutive model and the ABC-SVM constitutive model are used to forecast the sample’s stress–strain curve and compare it to the experimental data. The two models’ correlation coefficients (R2), root mean square error (RMSE), and mean absolute percentage error (MAPE) are computed and examined. The correlation coefficient between the ABC-SVM constitutive model calculation results and the experimental results is found to be larger (R2 = 0.998), and the error is smaller (RMSE = 0.7730, MAPE = 1.51), indicating that it has better prediction performance on the conventional triaxial constitutive relationship of rock. It is a highly promising new way of describing the rock’s constitutive connection.