Comprehensive Outlier Detection in Wireless Sensor Network with Fast Optimization Algorithm of Classification Model

Outlier detection is an important task for intrusion detection and fault diagnosis in wireless sensor networks (WSNs). Outliers in sensed data may be caused due to compromised or malfunctioning sensor nodes. In this paper, we propose a centralized and a distributed approach based on the principal component analysis (PCA) for outlier detection in WSNs. In the distributed approach, we partition the network into multiple groups of sensor nodes. Each group has a group head and several member nodes. Every member node uses a fixed- width clustering algorithm and sends a description of its local sensed data to the group head. The group head then applies a distributed PCA to establish a global normal pattern and detect outliers. This pattern is periodi- cally updated using weighted coefficients. We compare the performance of the centralized and distributed approaches based on the real sensed data collected by 54 Mica2Dot sensors deployed in Intel Berkeley Re- search Lab. The experimental results show that the distributed approach reduces both communication over- head and energy consumption, while achieving comparable accuracy.

A wireless sensor network (WSN) is defined as a set of spatially distributed and interconnected sensor nodes. WSNs allow one to monitor and recognize environmental phenomena such as soil moisture, air pollution, and health data. Because of the very limited resources available in sensors, the collected data from WSNs are often characterized as unreliable or uncertain. However, applications using WSNs demand precise readings, and uncertainty in data reading can cause serious damage (e.g., health monitoring data). Therefore, an efficient local/distributed data processing algorithm is needed to ensure: (1) the extraction of precise and reliable values from noisy readings; (2) the detection of anomalies from data reported by sensors; and (3) the identification of outlier sensors in a WSN. Several works have been conducted to achieve these objectives using several techniques such as machine learning algorithms, mathematical modeling, and clustering. The purpose of this paper is to conduct a systematic literature review to report the available works on outlier and anomaly detection in WSNs. The paper highlights works conducted from January 2004 to October 2018. A total of 3520 papers are reviewed in the initial search process. Later, these papers are filtered by title, abstract, and contents, and a total of 117 papers are selected. These papers are examined to answer the defined research questions. The current paper presents an improved taxonomy of outlier detection techniques. This will help researchers and practitioners to find the most relevant and recent studies related to outlier detection in WSNs. Finally, the paper identifies existing gaps that future studies can fill.

Wireless Sensor Networks (WSNs) are essential for real-time monitoring and control, but sensor faults can compromise data integrity and reduce the reliability of decisions. Supervised fault detection techniques typically require large amounts of labeled data, which are often unavailable in real-world scenarios. This paper proposes a data-efficient, unsupervised fault detection method that combines an LSTM-Attention Autoencoder with a dynamic thresholding mechanism. The model captures temporal patterns in normal sensor behavior and detects anomalies through context-aware reconstruction error analysis. Unlike conventional static thresholds, the dynamic approach adapts to changing sensor conditions, enhancing robustness in noisy or drifting environments. Experimental results on a synthetic dataset generated from real temperature sensor readings show that the proposed method achieves an F1-score of 98.90% and a recall of 99.24%, outperforming baseline methods including plain autoencoders, LSTM autoencoders, isolation forest, and one-class SVM. These findings demonstrate the model's effectiveness for real-time, label-free fault detection in resource-constrained WSNs.

Data reliability in Wireless Sensor Networks (WSNs) has a substantial influence on their smooth functioning and resource limitations. In a WSN, the data aggregated from clustered sensor nodes are forwarded to the base station for analysis. Anomaly Detection (AD) focuses on detecting outlier data to ensure consistency during data aggregation. As WSNs have critical resource limitations concerning energy consumption and sensor node lifetime, AD is supposed to provide data integrity with minimum energy consumption, which has been an active research problem. Hence, researchers are striving for methods to improve the accuracy of data handled with a concern on the constraints of WSNs. This paper introduces a Feed-forward Autoencoder Neural Network (FANN) model to detect abnormal instances with improved accuracy and reduced energy consumption. The proposed model also acts as a False Positive Reducer intending to reduce false alarms. It has been compared with the other dominant unsupervised algorithms over robustness and other significant metrics with real-time datasets. Relatively, our proposed model yields an improved accuracy with fewer false alarms thereby supporting a sustainable WSN.

To address the problem of unsupervised outlier detection in wireless sensor networks, we develop an algorithm that (1) is flexible with respect to the outlier definition, (2) works in-network with a communication load proportional to the outcome, and (3) reveals its outcome to all sensors. We examine the algorithm’s performance using simulation with real sensor data streams. Our results demonstrate that the algorithm is accurate and imposes a reasonable communication load and level of power consumption.

One-class support vector machines (OCSVM) have been recently applied to detect anomalies in wireless sensor networks (WSNs). Typically, OCSVM is kernelized by radial bais functions (RBF, or Gausian kernel) whereas selecting Gaussian kernel hyperparameter is based upon availability of anomalies, which is rarely applicable in practice. This article investigates the application of OCSVM to detect anomalies in WSNs with data-driven hyperparameter optimization. Specifically, the information of the farthest and the nearest neighbors of each sample is used to construct the objective cost instead of labeling based metrics such as geometric mean accuracy (G-mean) or area under the receiver operating characteristic (AUROC). The efficiency of this method is illustrated over the IBRL dataset whereas the resulting estimated boundary as well as anomaly detection performance are comparable with existing methods.

How to sense and monitor the environment with high quality is an important research subject in the Internet of Things (IOT). This paper deals with the important issue of the balance between the quality of target detection and lifetime in wireless sensor networks. Two target-monitoring schemes are proposed. One scheme is Target Detection with Sensing Frequency K (TDSFK), which distributes the sensing time that currently is only on a portion of the sensing period into the entire sensing period. That is, the sensing frequency increases from 1 to K. The other scheme is Target Detection with Adjustable Sensing Frequency (TDASF), which adjusts the sensing frequency on those nodes that have residual energy. The simulation results show that the TDASF scheme can improve the network lifetime by more than 17.4% and can reduce the weighted detection delay by more than 101.6%.

Outlier detection (OD) constitutes an important issue for many research areas namely data mining, medicines, and sensor networks. It is helpful mainly in identifying intrusion, fraud, errors, defects, noise and so on. In fact, outlier measurements are essential improvements to quality of information, as they are not conforming to expected normal behaviour. Due to the importance of sensed measurements is collected via wireless sensor networks, a novel OD process dubbed density‐based spatial clustering of applications with noise (DBSCAN)‐OD has been developed based on the algorithm DBSCAN, as a background for OD. With respect to the classic DBSCAN approach, two processes have been jointly combined, the first of computing parameters, while the second concerns class identification in spatial temporal databases. Through both of these modules, one is able to consider real‐time application cases as centralised in the base station for the purpose of separating outliers from normal sensors. For the sake of evaluating the authors proposed solution, a diversity of synthetic databases has been applied as generated from real measurements of Intel Berkeley lab. The reached simulation findings indicate well that their devised method can prove to help effectively in detecting outliers with an accuracy rate of 99%.

The quality of dataset measured and collected by wireless sensor networks (WSN) is often affected by noise and error that are inherent to resource-constrained sensor nodes. The affected data points deviating from the normal pattern are termed as outlier(s). However, detected outlier can be a result of the occurrence of an actual event. Outlier detection techniques developed for WSNs perform binary labelling of the data points and does not indicate the context stating whether the outlier is the result of an actual event or the noise/error. This paper proposes a contextual outlier detection framework specifically designed for WSNs named as in-network contextual outlier detection on edge (INCODE). The proposed framework also estimates the degree of outlierness associated with the detected outlier(s) to provide better insight into the measured data point. Algorithms used in INCODE are designed around the edge computing concept to minimize the communication and computational complexities to make it suitable for resource-constrained WSN. The results suggest an impressive 98% accuracy in identifying the context of the outlier(s). The low communication and computational complexity suggest INCODE’s suitability for resource constrained WSNs.

Wireless sensor networks are gaining more and more attention these days. They gave us the chance of collecting data from noisy environment. So it becomes possible to obtain precise and continuous monitoring of different phenomenons. However wireless Sensor Network (WSN) is affected by many anomalies that occur due to software or hardware problems. So various protocols are developed in order to detect and localize faults then distinguish the faulty node from the right one. In this paper we are concentrated on a specific type of faults in WSN which is the outlier. We are focus on the classification of data (outlier and normal) using three different methods of machine learning then we compare between them. These methods are validated using real data obtained from motes deployed in an actual living lab.

SummaryIn recent years, wireless sensor networks are pervasive and are generating tons of data every second. Performing outlier detection to detect faulty sensors from such a large amount of data becomes a challenging task. Most of the existing techniques for outlier detection in wireless sensor networks concentrate only on contents of the data source without considering correlation among different data attributes. Moreover, these methods are not scalable to big data. To address these 2 limitations, this paper proposes an outlier detection approach based on correlation and dynamic SMO (sequential minimal optimization) regression that is scalable to big data. Initially, correlation is used to find out strongly correlated attributes and then the point anomalous nodes are detected using dynamic SMO regression. For fast processing of big data, Hadoop MapReduce framework is used. The experimental analysis demonstrates that the proposed approach efficiently detects the point and contextual anomalies and reduces the number of false alarms. For experiments, real data of sensors used in body sensor networks are taken from Physionet database.

Outlier detection is a key component for the proper functioning of a wireless sensor network. It helps in identifying malicious events taking place in the field and faulty sensors. This paper presents a distributed outlier detection technique that separates outlying cases from normal data locally at sensors and sends only the summarized information of data to sink nodes to minimize the communication overhead in the resource-constraint wireless sensor network. The proposed solution employs variance of normal data as a measure to identify outliers. The performance of the proposed method has been evaluated on real-world datasets collected by WSN deployment projects. Experimental results prove the effectiveness of the proposed method in terms of higher outlier detection rate, lower false alarm rate and lower communication overhead as compared to the simulated centralized approach.KeywordsData varianceOutlier detectionWireless sensor networks

Data readings from wireless sensor networks (WSNs) may be abnormal due to detection of unusual phenomena, limited battery power, sensor malfunction, or noise from the communication channel. It is thus, important to detect such data anomalies available in WSNs to determine a suitable course of action. This paper proposes an integrated data compression and anomaly detection algorithm in WSNs which can detect anomalies accurately by employing half of sensor data measurement, instead of using all the sensor data measurement. The contribution of this paper centers on data compression by using Discrete Wavelet Transform (DWT) then feeding to anomaly detection by using One-Class Support Vector Machine (OCSVM). We tested our algorithm with several synthetic and real world datasets. The results showed that the proposed algorithm outperformed previous techniques in terms of near 100% detection rate and with marginal increase in false positive rates in presence of short and noise faults.

Event detection in wireless sensor networks is a sophisticated method for processing sampled data directly on the sensor nodes, thereby reducing the need for multihop communication with the base station of the network. In contrast to application-agnostic compression or aggregation techniques, event detection pushes application-level knowledge into the network. In-network event detection - especially the distributed form involving multiple sensor nodes - has thus an exceptional potential to increase energy efficiency, thus prolonging the lifetime of the network. In this article, we summarize recently proposed system architectures and algorithms employed for event detection in wireless sensor networks. On the example of the AVS-Extrem platform, we illustrate how energy-efficient event detection can be implemented through a combination of custom hardware design and distributed event detection algorithms. We then continue to present a brief evaluation of the detection accuracy and the energy consumption that is achievable by current systems.

Due to the major operating restrictions, ensuring security is the fundamental problem of Wireless Sensor Networks (WSNs). Because of their inadequate security mechanisms, WSNs are indeed a simple point for malware (worms, viruses, malicious code, etc.). According to the epidemic nature of worm propagation, it is critical to develop a worm defense mechanism in the network. This concept aims to establish novel malware detection in WSN that consists of several phases: “(i) Preprocessing, (ii) feature extraction, as well as (iii) detection”. At first, the input data is subjected for preprocessing phase. Then, the feature extraction takes place, in which principal component analysis (PCA), improved linear discriminant analysis (LDA), and autoencoder-based characteristics are retrieved. Moreover, the retrieved characteristics are subjected to the detection phase. The detection is performed employing combined shallow learning and DL. Further, the shallow learning includes decision tree (DT), logistic regression (LR), and Naive Bayes (NB); the deep learning (DL) includes deep neural network (DNN), convolutional neural network (CNN), and recurrent neural network (RNN). Here, the DT output is given to the DNN, LR output is subjected to CNN, and the NB output is given to the RNN, respectively. Eventually, the DNN, CNN, and RNN outputs are averaged to generate a successful outcome. The combination can be thought of as an Ensemble classifier. The weight of the RNN is optimally tuned through the Self Improved Shark Smell Optimization with Opposition Learning (SISSOOL) model to improve detection precision and accuracy. Lastly, the outcomes of the suggested approach are computed in terms of different measures.