Congestion avoidance and fault detection in WSNs using data science techniques

Wireless Sensor Networks (WSNs) are essential for real-time monitoring and control, but sensor faults can compromise data integrity and reduce the reliability of decisions. Supervised fault detection techniques typically require large amounts of labeled data, which are often unavailable in real-world scenarios. This paper proposes a data-efficient, unsupervised fault detection method that combines an LSTM-Attention Autoencoder with a dynamic thresholding mechanism. The model captures temporal patterns in normal sensor behavior and detects anomalies through context-aware reconstruction error analysis. Unlike conventional static thresholds, the dynamic approach adapts to changing sensor conditions, enhancing robustness in noisy or drifting environments. Experimental results on a synthetic dataset generated from real temperature sensor readings show that the proposed method achieves an F1-score of 98.90% and a recall of 99.24%, outperforming baseline methods including plain autoencoders, LSTM autoencoders, isolation forest, and one-class SVM. These findings demonstrate the model's effectiveness for real-time, label-free fault detection in resource-constrained WSNs.

The emergence of wireless sensor network (WSN) makes the communication between people and things more extensive, and provides a new way for people to obtain information and more accurate real‐time communication. However, the regional distance in WSN is still a big problem. This method can not only optimize the cluster structure, but also reduce the number of member nodes in the cluster, the cluster head receiving energy, and reduce the data transmission distance between nodes. At the same time, the number of packets received by the base station increases, so that more sensing information can be obtained. The simulation results showed that compared with the smart Ethernet protection (SEP) protocol and the low energy adaptive clustering hierarchy (LEACH) protocol, the number of first node deaths (FND) of the grey wolf optimizer (GWO) algorithm was 153 and 233 times different from those of the SEP and LEACH protocols respectively at 100m*100m. In the case of 200m*200m, compared with that of SEP and LEACH, the number of FND of GWO was 152 and 200 times different. Finally, in the case of 300m*300m, compared with that of SEP and LEACH, the number of FND of GWO was 142 and 158 times different. The GWO algorithm has a higher node ARE ratio in a wider region. In the same 1000 rounds, the node ARE of GWO was 61%, while the node ARE of SEP and LEACH protocols were 7% and 3%, respectively. From the above results, it can be found that the GWO algorithm has been greatly improved in terms of network energy efficiency, network lifetime, etc., and can still work normally under larger scale monitoring. The innovation of this article lies in the localization problem of fixed node mobile sensor networks, proposing a mobile sensor network localization method based on mobile error nodes. This can optimize the distance between nodes and improve the positioning accuracy of the algorithm in both distributed and centralized situations. This article is protected by copyright. All rights reserved.

Wireless Sensor Network (WSN) technology has recently moved out of controlled laboratory settings to real-world deployments. Many of these deployments experience high rates of failure. Common types of failure include node failure, link failure, and node reboot. Due to the resource constraints of sensor nodes, existing techniques for fault detection in enterprise networks are not applicable. Previously proposed WSN fault detection algorithms either rely on periodic transmission of node status data or inferring node status based on passive information collection. The former approach significantly reduces network lifetime, while the latter achieves poor accuracy in dynamic or large networks. Herein, we propose Sequence-Based Fault Detection (SBFD), a novel framework for network fault detection in WSNs. The framework exploits in-network packet tagging using the Fletcher checksum and server-side network path analysis to efficiently deduce the path of all packets sent to the sink. The sink monitors the extracted packet paths to detect persistent path changes which are indicative of network failures. When a failure is suspected, the sink uses control messages to check the status of the affected nodes. SBFD was implemented in TinyOS on TelosB motes and its performance was assessed in a testbed network and in TOSSIM simulation. The method was found to achieve a fault detection accuracy of 90.7% to 95.0% for networks of 25 to 400 nodes at the cost of 0.164% to 0.239% additional control packets and a 0.5% reduction in node lifetime due to in-network packet tagging. Finally, a comparative study was conducted with existing solutions.

Wireless Sensor Network (WSN) deployment experiences show that data collected is prone to be imprecise and faulty due to internal and external influences, such as battery drain, environmental interference, sensor aging. An early detection of such faults is necessary for the effective operation of the sensor network. In this preliminary work, we propose a hybrid approach to the detection of faults and we illustrate its performance on data coming from a real sensor deployment. The proposal is a first step to have a hybrid method towards automated on-line fault detection and classification in context-aware WSNs middleware framework.

Generally, fault detection approaches pursue high detection accuracy, but neglect energy consumption due to the high volume of messages exchanged. Therefore, in this work we propose a reactive distributed scheme for detecting faulty nodes. The scheme is able to detect transient and permanent faulty nodes accurately by exchanging fewer messages. In existing fault detection schemes, nodes exchange too many messages after every specific interval to detect suspicious node. However, in the proposed scheme comparatively much less messages are exchanged within a limited geographical area around the suspicious node only and that too when the node suspects its own readings. In the proposed scheme, each node exploits the temporal correlation in its own readings to detect any suspicious behavior. In order to confirm its status, the suspicious node communicates with its immediate neighbors who may be locally good or possible faulty with a certain level of confidence. Thus, the scheme utilizes the strength of both spatial and temporal correlation to find faulty nodes. Also, a confidence level is assigned to each correlated neighbor of suspicious node in order to enhance the detection accuracy. The ns-2 based simulation results show that our scheme performs better by reducing communication overhead and by detecting faulty nodes with high accuracy as compared to existing approaches.

A multi-modal Parkinson’s disease diagnosis system from EEG signals and online handwritten tasks using grey wolf optimization based deep learning model

Optimal design of mixed dielectric coaxial-annular TSV using GWO algorithm based on artificial neural network

Summary Congestion in WSN increases the energy dissipation rates of sensor nodes as well as the loss of packets and thereby hinders fair and reliable event detection. We find that one of the key reasons of congestion in WSN is allowing sensing nodes to transfer as many packets as possible. This is due to the use of CSMA/CA that gives opportunistic medium access control. In this paper, we propose an energy efficient congestion avoidance protocol that includes source count based hierarchical and load adaptive medium access control and weighted round robin packet forwarding. We also propose in-node fair packet scheduling to achieve fair event detection. The results of simulation show our scheme exhibits more than 90% delivery ratio even under bursty traffic condition which is good enough for reliable event perception. Key words: Sensor Network, Congestion Avoidance, Hierarchical Medium Access, Fair Event Detection. 1. Introduction Wireless Sensor Networks (WSNs) are densely deployed for a wide range of applications in the military, health, environment, agriculture and smart office domain. These networks deliver numerous types of traffic, from simple periodic reports to unpredictable bursts of packets triggered by sensed events. Therefore, congestion happens due to contention caused by concurrent transmissions, buffer overflows and time varying wireless channel condition [1][2][3]. As WSN is a multi-hop network, congestion taking place at a single node may diffuse to the whole network and degrades its performance drastically [4]. Congestion causes many folds of drawbacks: (i) it increases energy dissipation rates of sensor nodes, (ii) it causes a lot of packet loss, which in turn diminish the network throughput, and (iii) it hinders fair event detections and reliable data transmissions. Therefore, congestion avoidance and fair packet delivery become a crucial research issue for the practical realization of WSN based envisioned applications.

Optimizing the crop cultivation pattern, in order to reduce water consumption, in arid and semi-arid regions such as Iran, due to water scarcity and food intake, is an essential solution for food intakes needs. Optimizing the crop cultivation pattern, in order to reduce water consumption, in arid and semi-arid regions such as Iran, due to water scarcity and food intake, is an essential solution for food intakes needs. In this study, new methods based on the election algorithms (EA) and gray wolf optimizer (GWO) algorithms were used to determine the optimal cultivation pattern in Moghan plain during the statistical years of 2007-2016. The objective function in the agricultural sector was based on each product and its yield, net from each product and the cultivar. Then, maximization of the objective function was performed using GWO and EA algorithm. The results of using GWO algorithm in determining the optimal crop pattern in Moghan plain showed that using economic policies such as changing the cultivar pattern, we can obtain a better result compared to EA algorithm in the agricultural sector. In general, the results of GWO algorithm showed that in the Moghan plain with 0.9, 140 billion rials, that is, about 42 % will have economic growth. In sum, the results showed that GWO algorithm with high values of statistical criteria (R2=0.96, RMSE=0.022 and NSE=0.75) has a higher efficiency in optimizing the crop cultivation pattern of Moghan plain, which can be applied to the correct planning for other cultivation areas to be employed.

Sensors in Wireless Sensor Networks (WSNs) are prone to faults. Since sensor nodes often share parts of their information, it becomes possible to detect inconsistencies between a neighbour's report and what is expected. In this work, such inconsistencies are analysed using the Paraconsistent Annotated Logic with Two Values (PAL2V) to compare the actual decisions of neighbouring nodes with the expected decisions reconstructed from the local, partial information each node possesses. An algorithm is proposed based on majority voting (MV-PAL2V), concluding a set of states describing the contradiction and guiding a specific corrective response to reduce the associated errors. Simulation results demonstrate that using PAL2V enhances the accuracy of majority voting, particularly by reducing false alarm rates and improving the detection of actual events. Moreover, the statistical and interaction analysis of the simulation results emphasised that the number of nodes plays a crucial role in the reliability of the WSNs’ data.

Wireless sensor networks (WSNs) consist of many sensor nodes that are densely deployed throughout a randomized geographical area to monitor, detect, and analyze various physical phenomena. The primary obstacle encountered in WSNs pertains to the significant reliance of sensor nodes on finite battery power for wireless data transfer. Sensors as a crucial element inside Cyber-Physical Systems (CPS) renders them vulnerable to failures arising from intricate surroundings, substandard manufacturing, and the passage of time. Various anomalies can appear within WSNs, mostly attributed to defects such as hardware and software malfunctions and anomalies and assaults initiated by unauthorized individuals. These anomalies significantly impact the overall integrity and completeness of the data gathered by the networks. Therefore, it is imperative to provide a critical mechanism for the early detection of faults, even in the presence of constraints imposed by the sensor nodes. Machine Learning (ML) techniques encompass a range of approaches that may be employed to identify and diagnose sensor node faults inside a network. This paper presents a novel Energy-aware and Context-aware fault detection framework (ECFDF) that utilizes the Extra-Trees algorithm (ETA) for fault detection in WSNs. To assess the effectiveness of the suggested methodology for identifying context-aware faults (CAF), a simulated WSN scenario is created. This scenario consists of data from humidity and temperature sensors and is designed to emulate severe low-intensity problems. This study examines six often-seen categories of sensor fault, including drift, hard-over/bias, spike, erratic/precision, stuck, and data loss. The ECFDF approach utilizes an Energy-Efficient Fuzzy Logic Adaptive Clustering Hierarchy (EE-FLACH) algorithm to select a Super Cluster Head (SCH) within WSNs. The SCH is responsible for achieving optimal energy consumption within the network, and this selection process facilitates the early detection of faults. The results of the simulation indicate that the ECFDF technique has superior performance in terms of Fault Detection Accuracy (FDA), False-Positive Rate (FPR), and Mean Residual Energy (MRE) when compared to other detection and classification methods.

Outlier detection is an important task for intrusion detection and fault diagnosis in wireless sensor networks (WSNs). Outliers in sensed data may be caused due to compromised or malfunctioning sensor nodes. In this paper, we propose a centralized and a distributed approach based on the principal component analysis (PCA) for outlier detection in WSNs. In the distributed approach, we partition the network into multiple groups of sensor nodes. Each group has a group head and several member nodes. Every member node uses a fixed- width clustering algorithm and sends a description of its local sensed data to the group head. The group head then applies a distributed PCA to establish a global normal pattern and detect outliers. This pattern is periodi- cally updated using weighted coefficients. We compare the performance of the centralized and distributed approaches based on the real sensed data collected by 54 Mica2Dot sensors deployed in Intel Berkeley Re- search Lab. The experimental results show that the distributed approach reduces both communication over- head and energy consumption, while achieving comparable accuracy.

How to sense and monitor the environment with high quality is an important research subject in the Internet of Things (IOT). This paper deals with the important issue of the balance between the quality of target detection and lifetime in wireless sensor networks. Two target-monitoring schemes are proposed. One scheme is Target Detection with Sensing Frequency K (TDSFK), which distributes the sensing time that currently is only on a portion of the sensing period into the entire sensing period. That is, the sensing frequency increases from 1 to K. The other scheme is Target Detection with Adjustable Sensing Frequency (TDASF), which adjusts the sensing frequency on those nodes that have residual energy. The simulation results show that the TDASF scheme can improve the network lifetime by more than 17.4% and can reduce the weighted detection delay by more than 101.6%.

Generally, optimization is defined as the process of determining the minimum or maximum value that depends on the function of the goal, even now there are many problems regarding optimization. One of them is the problem regarding the selection of goods to be included in a limited storage medium called Knapsack problem. Knapsack problems have different types and variations. This study will solve the problem of bounded knapsack multiple constraints by implementing the Grey Wolf Optimizer (GWO) algorithm. The problem of bounded knapsack multiple constraints has more than one subject with the items that are inserted into the dimension storage media can be partially or completely inserted, but the number of objects is limited. The aim of this study is to determine the results of using the Grey Wolf Optimizer (GWO) algorithm for solving the problem of multiple constraints bounded knapsack and compare the optimal solutions obtained by the simplex method using the Solver Add-In in Microsoft Excel. The data used in this study is primary data. There are two parameters to be tested, namely population parameters and maximum iteration. The test results of the two parameters show that the population parameters and maximum iterations have the same effect, where the greater the value of the population parameters and the maximum iteration, the results obtained are also getting closer to the optimal value. In addition, based on the results of the final experiment it is known that the comparison of the results of the GWO algorithm and the simplex method has a fairly small percentage deviation which indicates that the GWO algorithm produces results that are close to the optimal value.
 Keywords: GWO algorithm, Knapsack, Multiple Constraints Bounded Knapsack.

The rapid growth of the Internet and information technologies and also the diminution of the price of hardware components like wireless sensors leads to the fast growth in Wireless Sensor Network (WSN). The WSN is a bunch/group of sensors that are located across the area, in order to monitor and determine environmental conditions such as temperature, humidity, vibrations, wind, water levels, pollution levels. WSNs are susceptible to major attacks like Denial of Service (DOS), Wormhole attack, Sinkhole attack, etc. The main threat to the WSN is because of the broadcast nature of the nodes in the network. Therefore, the security of WSNs is the essential part that must be done. Hence, to overcome these problems or threats, we are trying to detect it using AI technology. With the expanding fields of Machine Learning and Deep Learning, we can apply various algorithms in order to classify different types of attacks. Once we detect the attack properly, we can prevent it accordingly. We are using WSN-DS. It has 4 classes of attacks which are Grayhole, Blackhole, TDMA(Scheduling), and Flooding which comes under the category of DOS attacks. In this chapter, we have analysed and compared the accuracies of 5 main machine learning classification algorithms. Also, we have analysed the 1 deep learning algorithm. The ANN (Artificial Neural Network) and 5 machine learning algorithms have been trained on the dataset. Furthermore, we have used K-fold cross-validation to get even more accurate predictions. After analysis of these algorithms, we came to the point that, the Machine Learning algorithms like Random Forest, Support Vector Machines and Deep Learning algorithm, namely, Artificial Neural Network can help us for detecting intrusions in the system or network. This will help researchers in designing their own machine learning model on top of our suggested model.