Congestion Control Scheme for Link Quality Improvement Using Bio‐Inspired Fuzzy Inference System–Based CoAP in IoT

Internet of Things (IoT) has been thriving in recent years, playing an important role in a multitude of various domains, including industry 4.0, smart transportation, home automation, and healthcare. As a result, a massive number of IoT devices are deployed to collect data from our surrounding environment and transfer these data to other systems over the Internet. This may lead to cybersecurity threats, such as denial of service attacks, brute‐force attacks, and unauthorized accesses. Unfortunately, many IoT devices lack solid security mechanisms and hardware security supports because of their limitations in computational capability. In addition, the heterogeneity of devices in IoT networks causes nontrivial challenges in detecting security threats. In this article, we present a collaborative intrusion detection system (IDS), namely, MidSiot, deployed at both Internet gateways and IoT local gateways. Our proposed IDS consists of three stages: (1) classifying the type of each IoT device in the IoT network; (2) differentiating between benign and malicious network traffic; and (3) identifying the type of attacks targeting IoT devices. The last two stages are handled by the Internet gateways, whereas the first stage is on the local gateway to leverage the computational resources from edge devices. The evaluation results on three popular IDS datasets (IoTID20, CIC‐IDS‐2017, and BOT‐IoT) indicate our proposal could detect seven common cyberattacks targeting IoT devices with an average accuracy of 99.68% and outperforms state‐of‐the‐art IDSs. This demonstrates that MidSiot could be an effective and practical IDS to protect IoT networks.

In opportunistic networks the communication opportunities (contacts) are intermittent and there is no need to establish an end-to-end link between the communication nodes. The enormous growth of devices having access to the Internet, along the vast evolution of the Internet and the connectivity of objects and devices, has evolved as Internet of Things (IoT). There are different issues for these networks. One of them is the selection of IoT devices in order to carry out a task in opportunistic networks. In this work, we implement a Fuzzy-Based System for IoT device selection in opportunistic networks. For our system, we use four input parameters: IoT Device’s Number of Past Encounters (IDNPE), IoT Contact Duration (IDCD), IoT Device Storage (IDST) and IoT Device Remaining Energy (IDRE). The output parameter is IoT Device Selection Decision (IDSD). The simulation results show that the proposed system makes a proper selection decision of IoT devices in opportunistic networks. The IoT device selection is increased up to 15% and 27% by increasing IDNPE and IDRE, respectively.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

Internet of things (IoT) devices heavily rely on wireless connectivity. There are intrinsic overlooked limitations such as reach, availability, security and safety vulnerabilities closely associated with wireless solutions. Wired connectivity is the alternative to tackle those issues, and optical fibers directly connecting IoT devices could provide them unique features such as huge bandwidth, long reach, signal integrity and high security grade for the transmitted information. Nevertheless, it can be prohibitive for IoT devices which are power hungry and have costly electrical-to-optical conversions. In this paper, first, a niche is identified for IoT over fiber (IoToF) based on fully passive optical solutions for long reach upstream of low data rate optical connectivity over dark fibers. Then, we proposed, implemented and characterized a prototype physical connectivity (PHY) based on fiber Bragg grating (FBG) low-cost acousto-optic modulation at IoT devices and respective optical edge-filtering as wavelength discriminator at the receiver. Finally, we performed an experimental demonstration of upstream data communication based on simple M-ary frequency-shift keying (FSK), with baud rate of 300 bps transmitted over 30 km range. In terms of data rate and reach for niche applications, IoToF can outperform traditional wireless technologies, such as Sigfox or LoRa. IoToF will enable monitoring urban areas with scarce and polluted spectrum, industrial areas requiring intrinsic safety, and upstreaming data from IoT devices in remote locations with unfavorable wireless propagation but with dark fibers available.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

Research Article| March 01, 2016 The Internet of Geophysical Things: Raspberry Pi Enhanced REF TEK (RaPiER) System Integration and Evaluation Frank Sepulveda; Frank Sepulveda aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Search for other works by this author on: GSW Google Scholar Jay Pulliam Jay Pulliam aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Search for other works by this author on: GSW Google Scholar Author and Article Information Frank Sepulveda aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Jay Pulliam aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Publisher: Seismological Society of America First Online: 14 Jul 2017 Online Issn: 1938-2057 Print Issn: 0895-0695 © 2016 by the Seismological Society of America Seismological Research Letters (2016) 87 (2A): 345–357. https://doi.org/10.1785/0220150234 Article history First Online: 14 Jul 2017 Cite View This Citation Add to Citation Manager Share Icon Share Facebook Twitter LinkedIn MailTo Tools Icon Tools Get Permissions Search Site Citation Frank Sepulveda, Jay Pulliam; The Internet of Geophysical Things: Raspberry Pi Enhanced REF TEK (RaPiER) System Integration and Evaluation. Seismological Research Letters 2016;; 87 (2A): 345–357. doi: https://doi.org/10.1785/0220150234 Download citation file: Ris (Zotero) Refmanager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex toolbar search Search Dropdown Menu toolbar search search input Search input auto suggest filter your search All ContentBy SocietySeismological Research Letters Search Advanced Search ABSTRACT The proliferation of commercial Internet of Things (IoT) devices is raising consumers’ awareness of the benefits of enhancing everyday objects with the ability to communicate, sense, and process information. Commercial‐off‐the‐shelf (COTS) versions of the embedded technologies responsible for the rise of the IoT are easy‐to‐use, inexpensive, and relatively powerful. IoT Makers, technological do‐it‐yourself enthusiasts, utilize these technologies and the IoT ecosystem to create IoT devices that range from casual hobbyist to entrepreneurial in nature.In an effort to develop a “no‐engineer‐needed” Internet of Geophysical Things (IoGT) device, we integrated a COTS embedded computer with a geoscience‐related COTS data acquisition system (DAS). Using skills common to geoscientists, we integrated the Raspberry Pi System‐On‐Chip with the REF TEK (a Trimble brand) 130‐01 DAS. This Raspberry Pi enhanced REF TEK (RaPiER) provides IoGT Makers a platform for the development of geoscientific sensor node or network enhancements. IoGT Makers can use the RaPiER to tinker with IoT capabilities while simultaneously acquiring research‐quality data. Geoscientific (i.e., seismic) application areas that may benefit from RaPiER, particularly RaPiER nodal processing, include earthquake and engineering seismology.In this article, we discuss the emerging technologies that allow IoGT Makers to build their own IoGT device. We review our selection of the Raspberry Pi and REF TEK 130‐01 for IoGT device integration. We provide a RaPiER system integration guide and REF TEK interface software compiled for the Raspberry Pi ( available in the electronic supplement to this article). We present methods to expand RaPiER capabilities using the Raspberry Pi’s ecosystem. Last, we discuss our evaluation of RaPiER’s performance and its suitability for realistic field deployments. You do not have access to this content, please speak to your institutional administrator if you feel you should have access.

Usually, IoT devices are designed to perform specific tasks, while robots have to adapt to unpredictable situations. Artificial intelligence and machine learning help these robots cope with the emerging unexpected conditions. The Internet of Robotic Things is an evolving concept that brings together all-encompassing sensors and devices with robotic and autonomous systems. Both IoT devices and robots rely on sensors to understand the surrounding environment, to process data quickly, and to decide how to respond. Nevertheless, while most IoT systems can handle only well-defined tasks, robots can handle expected situations as well. The Internet of Robotic Things is a better Internet of Things (IoT) solution due to its ability to bridge the gap between IT and real operations. The IoRT may face several challenges in power consumption and network bandwidth limitation due to the growth in the information dissemination over the Robotic network. The main objective of this paper is to introduce an overview of the concepts and challenges in the Internet of Robotic Things based on Fog Computing technique. Further, a framework of Fog based IoRT is introduced.

Internet of Things (IoT) is an emerging technology that consists of tiny sensors embedded with IoT devices used in e-Health, smart cities and assisted living. IoT devices are equipped with constrained power, memory, and computing capabilities, which creates new security challenges. By integrating sensors and wireless technologies, this cutting-edge technology automates numerous routine tasks in different domains. The main goal of advancing IoT in the existing healthcare system is to automate the monitoring of hospitals and patients’ health by spreading goodwill toward the IoT vision. IoT has gained popularity on practically all platforms that are available. This paper presents a remote patient health monitoring and diagnosis system that uses Message Queuing Telemetry Transport protocol (MQTT) and Internet of Things (IoT) devices with one time pad cryptography. The proposed plan offers end-to-end data secrecy for an IoT system using MQTT that enables e-health and mobility. Patients’ movements inside nursing homes and healthcare facilities are also managed safely without the need for periodic reconfigurations. Prior to communicating through the MQTT protocol, this secure crypto scheme encrypts the message on both the publisher and subscriber ends. According to the results, the proposed scheme is more efficient than delegation-based architecture in terms of security and lightweight communication. The proposed system established communication between patients and medical experts using IoT technologies to alleviate the hospital strain caused by congestion in medical treatment and enable an expressway of medical responses. According to our results the proposed scheme has low computational overhead compared to other solutions that use conventional encryption to guarantee robust protection against most of the IoT security attacks.

Seeing is not always believing: Insights on IoT manufacturing from firmware composition analysis and vendor survey

With the advancement in science and technology, the demand for electronic Internet of Things (IoT) devices has increased to store and process digital data. With the advancement in IoT technology, we are more reliant on IoT devices to perform our regular tasks. IoT Forensics deals with the investigation of IoT devices such as smartphones, tablets, smart watches, or any device which is connected to the Internet. The data on these devices can still be retrieved via IoT forensics even if they are destroyed, resold, or misplaced. Before discarding any IoT device, we must consider how to secure the data stored on them. We are then going to discuss the several types of personal data that could be retrieved from discarded IoT devices. Finally, we are going to discuss the protection measures for the safe disposal of IoT devices.

The number of Internet of Things (IoT) devices has increased recently and will increase further in the future. IoT devices are vulnerable, so vendors update and distribute firmware. At the time of firmware distribution, a huge number of IoT devices may connect to the firmware server and excessive network traffic may occur. Consequently, a method using a peer-to-peer file sharing system and a blockchain has been proposed. One study proposed an update scheme considering incentives for distributors to help with updating. However, this method requires the IoT devices, which have limited processing power, to decrypt encrypted files, and the distribution nodes to pay the transaction cost. This paper proposes a firmware distribution method that provides incentives for distributors to help with distribution to reduce the gas costs, using a smart contract and access control based on update records. The additional computations performed by IoT devices and distributors key management were reduced compared to those in previous studies by using access control instead of encryption. Further, the proposed approach was implemented and evaluated using a Raspberry Pi and laptop. The evaluation demonstrated that the gas cost per update was successfully lowered compared to the costs in previous studies.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

The deployment of a client–server-based distributed intelligent system involves application development in both the network domain and the device domain. In the network domain, an application server (typically in the cloud) is deployed to execute the network applications. In the device domain, several Internet of Things (IoT) devices may be configured as, for example, wireless sensor networks (WSNs), and interact with each other through the application server. Developing the network and the device applications are tedious tasks that are the major costs for building a distributed intelligent system. To resolve this issue, a low-code or no-code (LCNC) approach has been purposed to automate code generation. As traditional LCNC solutions are highly generic, they tend to generate excess code and instructions, which will lack efficiency in terms of storage and processing. Fortunately, optimization of automated code generation can be achieved for IoT by taking advantage of the IoT characteristics. An IoT-based distributed intelligent system consists of the device domain (IoT devices) and the network domain (IoT server). The software of an IoT device in the device domain consists of the Device Application (DA) and the Sensor Application (SA). Most IoT LCNC approaches provide code generation in the network domain. Very few approaches automatically generate the DA code. To our knowledge, no approach supports the SA code generation. In this paper, we propose DeviceTalk, an LCNC environment for the DA and the SA code development. DeviceTalk automatically generates the code for IoT devices to speed up the software development in the device domain for a distributed intelligent system. We propose the DeviceTalk architecture, design and implementation of the code generation mechanism for the IoT devices. Then, we show how a developer can use the DeviceTalk Graphical User Interface (GUI) to exercise LCNC development of the device software.

This dissertation proposes a solution to the growing concern about the security of Internet of Things (IoT) devices in home or business environments. Entitled MAIOS (Multi Accountability IoT Oriented Switch), the system offers an SDN (Software Defined Networking) switch architecture, which provides effective segmentation for IoT devices, increasing their protection against cyber threats. The research begins by contextualizing the exponential increase in IoT devices and the security challenges associated with them. MAIOS addresses this issue through a centralized control layer, which allows efficient management of IoT devices and the implementation of dynamic security policies, which can be applied from an SDN control plane application layer. The system was designed considering functional, non-functional requirements and deployment scenarios, either in home or business environments. To increase usability, an intuitive interface was developed for users, facilitating the configuration and monitoring of IoT devices. The solution is based on open source technologies such as pfSense proxy/firewall and Home Assistant to provide functionalities such as firewall, IoT control and real-time traffic monitoring. The effectiveness of MAIOS is evaluated through security and performance tests in simulated environments, which demonstrated its ability to identify and mitigate cyber threats, providing robust security for IoT devices. This dissertation offers a contribution to the field of IoT security, presenting a practical, affordable and effective solution to protect devices in residential and business networks. MAIOS represents an important advance in ensuring digital security in an increasingly connected world.