Convergence analysis of hyperparameter-free MCC-based channel estimation for mmWave MIMO systems

In this work we consider the problem of M-ary signal detection over a single-input-multiple-output channel affected by time- and/or frequency-dispersive Rayleigh-distributed fading and in the presence of non-Gaussian noise, modeled as a spherically invariant random process (SIRP). We derive the optimum (minimum error-probability) detector, and show that its structure is canonical, i.e. it is independent of the actual noise statistics. Finally, the performance analysis of the receiver highlights that the adoption of diversity represents a suitable means to restore performance also in the presence of dispersive fading and impulsive non-Gaussian noise.

Recently, technological developments have enhanced, the use of Millimeter-wave (mm-Wave) Multiple Input Multiple Output (MIMO) system in various communication applications and wireless sensor networks as channel estimation efficiency can be immensely improved with the help of this technological developments in Millimeter-wave MIMO system and wireless sensor network as well. Moreover, they can improve quality of communication services to a great extent. However, cell interference in Millimeter-wave (mm-Wave) MIMO system can produce a massive impact on spectral efficiency. Therefore, a Routing Enabled Channel Estimation (RECE) technique is presented in this article to minimize interference between cells. The proposed Channel Estimation technique improves channel capacity as well as spectral efficiency. Moreover, Normalized Mean Square Error (NMSE) is minimized heavily using proposed RECE technique. Here, main aim of this article is to reduce cell interference and channel estimation inside a cell by using route selection, beam selection, and spatial frequency estimation. Here, different scenarios and parameters are considered to evaluate performance efficiency of proposed RECE technique in terms of spectral efficiency, NMSE and SNR and compared against varied traditional channel estimation techniques. Moreover, it is clearly evident from performance results that the proposed channel estimation technique performs better than the other two methods.

The fifth generation cellular communication is all about high speed internet access with devices consuming less amount of power. Millimeter wave Multiple Input Multiple Output (MIMO) systems is a promising technology that offers high data rates due to a large bandwidth. These systems are compact with minimal antenna heights which allows us to deploy these systems more widely. The mm-Wave Massive MIMO systems enhances the data rates to a large extent. But due to the increasing number of antennas to support high data rates, the power consumption of the system goes high. In this paper, a limited channel state information (CSI) based precoding technique has been used to optimize the power consumption and to reduce the computational complexity of the system. The use of Hybrid Precoder architecture with sub array of precoding blocks helps in reducing the computational complexity by many folds. The conditional switching between two stages minimizes the number of computations required. The estimation of Angle of arrival (AoA) enables the precoder to steer the beam at the transmitter for higher throughput. The smart antenna selection algorithm optimizes the power consumption of the system. The two – staged precoding algorithm proposed employs all these techniques to optimize the performance of mm-Wave MIMO systems.

Many IN mitigation techniques have been proposed to mitigate impulsive noise (IN) over powerlines, the most common of which is the blanking technique. The conventional way to implement this technique however requires prior knowledge about the IN characteristics to identify the optimal blanking threshold (OBT). When such knowledge cannot be obtained the performance deteriorates rapidly. To alleviate this, a look-up table (LUT) based algorithm with uniform quantization is deployed to utilize estimates of the peak to average power ratio at the receiver to determine the OBT. In this paper, we investigate the impact of quantization bits on the system performance as well as the performance loss due to the impact of IN on the side information. Two aspects of the achievable performance are considered namely, output signal-to-noise ratio (SNR) and symbol error rate under various IN scenarios. The results reveal that a 5 bit LUT is sufficient to achieve a gain of up to 3dB SNR improvement relative to the conventional blanking method. Furthermore, it will be shown that the loss due to the practical impact of IN on the side information is insignificant.

Most of the analyses of multiple-input multiple-output (MIMO) systems so far have been based on the ideal Gaussian noise model. In this paper, performance analysis of MIMO systems is performed in a mixture of Gaussian noise and impulsive noise modeled as a symmetric alpha stable process. Three typical MIMO systems are considered: 1) zero-forcing (ZF) system, 2) maximum likelihood (ML) system and 3) space time block coding (STBC) system. The symbol-error-rates (SER) or the upper bound of SER of each system is derived. Simulations are performed in the mixed noise with different impulsive intensity and impulsive level and the results show that the performances of all the systems are degraded greatly in the mixed noise and STBC has no performance gain over ZF and ML when high impulsive noise appears.

Steady-state mean-square performance analysis of the block-sparse maximum Versoria criterion

This paper reports on investigations into the effects of spatial correlation on channel estimation and capacity of a multiple input multiple output (MIMO) system. Minimum mean square error (MMSE) method is applied for channel estimation under a correlated channel scenario. Simulation results for a 4 times 4 MIMO system with the Jakes model describing a channel between a base station and a mobile station demonstrate a trade-off between the effects of spatial correlation, channel estimation and capacity. For low values of signal to noise ratio (SNR), spatial correlation decreases channel estimation errors and improves capacity. For high values of SNR, spatial correlation has a less pronounced effect on improving channel estimation and thus the MIMO capacity is adversely affected by the decreased channel matrix rank.

In recent years, multiple-input multiple-output (MIMO) systems, which use several transmit and receive antennas, have attracted much attention for high performance radio systems. In MIMO systems, the channel estimation is important to distinguish transmit signals from multiple transmit antennas. While the space-alternating generalized expectation-maximization (SAGE) algorithm is known to offer good channel estimation and data detection. We proposed earlier the minimum mean square error (MMSE)-based SAGE algorithm for MIMO systems where the MMSE estimation is used for channel estimation. We showed that the proposed MMSE-based SAGE algorithm can achieve the better bit error rate (BER) than the maximum likelihood (ML) detection with training symbols. The MMSE channel estimation needs the knowledge of the maximum Doppler frequency F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">d</sub> for deriving the covariance matrix of the channel and the variance sigma <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of additive white Gaussian noise (AWGN). Additionally, the computation of the MMSE channel estimation requires O(L <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> ) operations where L is the transmitted frame length. Thus, its computational complexity is high. In this paper, we propose a zero-forcing (ZF)-based SAGE algorithm for channel estimation and data detection in MIMO systems that does not need the knowledge of Fd and sigma <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Since the computation of the proposed ZF-based SAGE algorithm requires O(N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> ) operations where N is the number of transmit antennas, its computational complexity is low. We show that the proposed ZF-based tracking SAGE algorithm with less computational complexity can achieve almost the same BER as that of the MMSE-based tracking SAGE algorithm

In this paper, we propose a self-learning algorithm with the incremental learning capability, in which correntropy is selected as the cost function. Based on the correntropy concept of information theoretic learning (ITL), the incremental self-learning algorithm is presented for nonlinear system identification and the real world prediction problems against impulsive noises. Correntropy is a measure of information content that represents a similarity measure between two arbitrary random variables and has the advantages of rejecting outliers or impulsive noises. The proposed algorithm combines the neural network structure and fuzzy model, wherein the network hidden node (i.e. rule base) starts with empty and grows online based on the incremental learning method. Moreover, the maximum correntropy criterion (MCC) is applied to update the weight parameters for self-learning during the incremental process. The incremental process under two criteria is validated in detail through a nonlinear identification problem under impulsive environment. The performance evaluation of the proposed algorithm is also carried out on a nonlinear system identification and Time Series Data Library under both noise-free and impulsive noise conditions. The simulation results demonstrate that the proposed algorithm has better identification and prediction accuracy with the least number of rules and training time, and it also owns robustness for handling superior impulsive noise when compared to other algorithms.

In wireless communication systems, the ambient channel noise is known through experimental measurements to be decidedly non-Gaussian, due largely to impulse phenomena. It is known, too, that when data are contaminated by non-Gaussian noise, the conventional MMSE channel estimation method may perform poorly. We develop robust channel estimation algorithms to combat the impulse noise in multiple input multiple output (MIMO) systems. Simulation results show that the robust channel estimation (RCE) method offers significant performance gain with little attendant increase in computational complexity compared with the MMSE channel estimation method in non-Gaussian channels. To implement RCE in practice, we also develop two approximate robust channel estimation (ARCE) methods.

The adaptive algorithms have been widely studied in Gaussian environment. However, the impulsive noise and other non-Gaussian noise may largely deteriorate the performance of algorithm in practical applications. To address this problem, in this paper, we propose two novel adaptive algorithms for system identification problem with mixed noise scenarios. Both proposed algorithms are based on the framework of the affine projection (AP) algorithm. The first proposed algorithm, termed as VS-APMCCA, combines variable step-size (VS) strategy and maximum correntropy criterion (MCC) to obtain improved performance. For further performance improvement, the VC-VS-APMCCA is developed, which is based on the variable center (VC) scheme of MCC. The convergence analysis of the VC-VS-APMCCA is conduced. Finally, simulation results demonstrate the superior performance of the VS-APMCCA and VC-VS-APMCCA.

After a few decades’ evolution of wireless communication systems, to ensure reliable highspeed communication over unreliable wireless channels is still one of the major challenges facing researchers and engineers. The use of multiple antennas at transmitter and receiver, known as multiple-input multiple-output (MIMO) communications, is one promising technology delivering desired wireless services. The main goal of this thesis is to study two important issues in wireless MIMO communication systems: receiver design for coded MIMO systems, and diversity-multiplexing tradeoff analysis in general fading channels. In the first part of this thesis, we decompose the receiver design problem into two subproblems: MIMO channel estimation and MIMO detection. For the MIMO channel estimation, we develop an expectation-maximization (EM) based semi-blind channel and noise covariance matrix estimation algorithm for space-time coding systems under spatially correlated noise. By incorporating the proposed channel estimator into the iterative receiver structure, both the channel estimation and the error-control decoding are improved significantly. We also derive the modified Cramer-Rao bounds (MCRB) for the unknown parameters as the channel estimation performance metric, and demonstrate that the proposed channel estimation algorithm can achieve the MCRB after several iterations. For the MIMO detection, we propose a novel lowcomplexity MIMO detection algorithm, which has only cubic order computational complexity, but with near-optimal performance. For a 4×4 turbo-coded system, we show that the proposed detector had the same performance as the maximum a posteriori (MAP) detector for BPSK modulation, and 0.1 dB advantage over the approximated MAP detector (list sphere decoding algorithm) for 16-QAM modulation at BER = 10−4. In the second part of this thesis, we derive the optimal diversity-multiplexing tradeoff for

Orthogonal frequency division multiplexing (OFDM) is adopted in most wireless communication systems, and the performance of OFDM is affected by impulse noise (IN). Better channel estimation (CE) performance is required to detect the channel information on the receiving side. The OFDM system is considered with the number of subcarriers carrying the data and pilot symbols. In the OFDM modulator, the symbols of the frequency domain are transformed into the signals of the time domain using inverse discrete Fourier transformation (IDFT). Effective impulsive noise mitigation is crucial for improving the effectiveness of OFDM communication systems, and it improves the signal-to-noise ratio (SNR) at the receiver. A cyclic prefix is then appended before transmission through the channel. In the receiver noise, the effect of IN is mitigated jointly with CE using the Bayesian matching pursuit (BMP) and Moth-flame algorithm (MFA). In this approach, the IN and channel information is considered as a sparse vector. Here, the data symbols used are considered an unknown parameter. The approach incorporating all subcarriers has a lower mean square error (MSE) of IN estimate for impulsive noise reduction. The MFA algorithm is used to optimize the sensor matrix in BMP. The sparsity of the channel and the impulse response are observed in the time domain to represent the channel and IN together. It exactly recovers the sparse signal for finding the convex objectives of the sparse minimizer, and the sparse solution is obtained with fixed point updates. The proposed BMP algorithm improves the CE by explicitly considering the existence of IN. The BMP is a greedy algorithm that selects the most correlated residuals at each column. Under mutual incoherence, it recovers the signal with a higher probability. The simulated outcomes proved that the proposed CE and noise mitigation model achieved better performance based on the bit error rate (BER), throughput and MSE.

To date, most linear and nonlinear Kalman filters (KFs) have been developed under the Gaussian assumption and the well-known minimum mean square error (MMSE) criterion. In order to improve the robustness with respect to impulsive (or heavy-tailed) non-Gaussian noises, the maximum correntropy criterion (MCC) has recently been used to replace the MMSE criterion in developing several robust Kalman-type filters. To deal with more complicated non-Gaussian noises such as noises from multimodal distributions, in this article, we develop a new Kalman-type filter, called minimum error entropy KF (MEE-KF), by using the minimum error entropy (MEE) criterion instead of the MMSE or MCC. Similar to the MCC-based KFs, the proposed filter is also an online algorithm with the recursive process, in which the propagation equations are used to give prior estimates of the state and covariance matrix, and a fixed-point algorithm is used to update the posterior estimates. In addition, the MEE extended KF (MEE-EKF) is also developed for performance improvement in the nonlinear situations. The high accuracy and strong robustness of MEE-KF and MEE-EKF are confirmed by experimental results.

In order to realize the high-resolution multipath Time Difference Of Arrival (TDOA) estimation which is not limited by the resolution limit of correlation method under impulsive noise environment, a Correntropy Expectation-Maximum (CEM) high resolution multipath TDOA estimation algorithm is proposed based on the Maximum Correntropy Criterion (MCC). The multipath TDOA is estimated by transforming multi-dimensional optimization problems into multiple one-dimensional optimization problems. The simulation results show that the CEM algorithm has good estimation performance under strong impulsive noise and low SNR environment, and the selection of kernel size in CEM algorithm is not depend on the prior information of the impulsive noise.