ConVGPU: GPU Management Middleware in Container Based Virtualized Environment

There are two inherent obstacles to effectively using Graphics Processing Units (GPUs) for query processing in search engines: (a) the highly restricted GPU memory space, and (b) the CPU-GPU transfer latency. Previously, Ao et al. presented a GPU method for lists intersection, an essential component in AND-based query processing. However, this work assumes the whole inverted index can be stored in GPU memory and does not address document ranking. In this paper, we describe and analyze a GPU query processing method which incorporates both lists intersection and top-k ranking. We introduce a parameterized pruned posting list GPU caching method where the parameter determines how much GPU memory is used for caching. This method allows list caching for large inverted indexes using the limited GPU memory, thereby making a qualitative improvement over previous work. We also give a mathematical model which can identify an approximately optimal choice of the parameter. Experimental results indicate that this GPU approach under the pruned list caching policy achieves better query throughput than its CPU counterpart, even when the inverted index size is much larger than the GPU memory space.

The graphics processing unit (GPU) is extensively used in diverse domains, such as finance, machine learning, and image processing. The GPU can be underutilized as multiple applications may not share the same GPU concurrently owing to a memory oversubscription issue. For example, when applications that require fewer computational resources but a larger GPU memory are running instantaneously, the GPU memory may be insufficient; consequently, the number of GPU applications running simultaneously is restricted, decreasing GPU utilization. Further, it can even stop the execution of applications that are running on the GPU. To this end, we propose FlexGPU, which schedules the kernels of the GPU applications that run on the same GPU according to their features. This framework 1) schedules the kernel at the launching time according to its features to improve GPU utilization and 2) temporarily checkpoints and restores non-dependent content in the GPU memory to/from the host memory, which avoids oversubscription of the GPU when out-of-memory failure occurs and allows more kernels to run concurrently on the GPU. The experimental results show that compared to existing methods, our approach demonstrates a 7 times improvement in performance in terms of execution time and enables a 2.5 times increase in the concurrent execution of applications.

Feedback control has become a crucial tool in the research on magnetic confinement of plasmas for achieving controlled nuclear fusion. This thesis presents a novel plasma feedback control system that, for the first time, employs a Graphics Processing Unit (GPU) for microsecond-latency, real-time control computations. This novel application area for GPU computing is opened up by a new system architecture that is optimized for low-latency computations on less than kilobyte sized data samples as they occur in typical plasma control algorithms. In contrast to traditional GPU computing approaches that target complex, high-throughput computations with massive amounts of data, the architecture presented in this thesis uses the GPU as the primary processing unit rather than as an auxiliary of the CPU, and data is transferred from A-D/D-A converters directly into GPU memory using peer-to-peer PCI Express transfers. The described design has been implemented in a new, GPU-based control system for the High-Beta Tokamak – Extended Pulse (HBT-EP) device. The system is built from commodity hardware and uses an NVIDIA GeForce GPU and D-TACQ A-D/D-A converters providing a total of 96 input and 64 output channels. The system is able to run with sampling periods down to 4 μs and latencies down to 8 μs. The GPU provides a total processing power of 1.5 x 1012 floating point operations per second. To illustrate the performance and versatility of both the general architecture and concrete implementation, a new control algorithm has been developed. The algorithm is designed for the control of multiple rotating magnetic perturbations in situations where the plasma equilibrium is not known exactly and features an adaptive system model: instead of requiring the rotation frequencies and growth rates embedded in the system model to be set a priori, the adaptive algorithm derives these parameters from the evolution of the perturbation amplitudes themselves. This results in non-linear control computations with high computational demands, but is handled easily by the GPU based system. Both digital processing latency and an arbitrary multi-pole response of amplifiers and control coils is fully taken into account for the generation of control signals. To separate sensor signals into perturbed and equilibrium components without knowledge of the equilibrium fields, a new separation method based on biorthogonal decomposition is introduced and used to derive a filter that performs the separation in real-time. The control algorithm has been implemented and tested on the new, GPU-based feedback control system of the HBT-EP tokamak. In this instance, the algorithm was set up to control four rotating n = 1 perturbations at different poloidal angles. The perturbations were treated as coupled in frequency but independent in amplitude and phase, so that the system effectively controls a helical n = 1 perturbation with unknown poloidal spectrum. Depending on the plasma's edge safety factor and rotation frequency, the control system is shown to be able to suppress the amplitude of the dominant 8 kHz mode by up to 60% or amplify the saturated amplitude by a factor of up to two. Intermediate feedback phases combine suppression and amplification with a speed up or slow down of the mode rotation frequency. Increasing feedback gain results in the excitation of an additional, slowly rotating 1.4 kHz mode without further effects on the 8 kHz mode. The feedback performance is found to exceed previous results obtained with an FPGA- and Kalman-filter based control system without requiring any tuning of system model parameters. Experimental results are compared with simulations based on a combination of the Boozer surface current model and the Fitzpatrick-Aydemir model. Within the subset of phenomena that can be represented by the model as well as determined experimentally, qualitative agreement is found.

In data-parallel computing that uses a graphic processing unit (GPU), processing of large data requires that multiple GPUs be used in the computer to increase its execution performance. Increasing processing performance by using multiple computing resources has been enabled by the development of computing frameworks based on a directed acyclic graph (DAG). However, their performance degrades in out-of-core processing, which often occurs in processing of large data on GPUs with limited memory capacity. The GPU data input/output (I/O) for data swapping between host memory and GPU memory during the execution of a user DAG is usually a performance bottleneck. A computing framework called is proposed to overcome this drawback. It uses a novel scheduler that involves two methods to minimize the total amount of GPU data I/O of data swapping. First, it performs locality-aware scheduling. When it schedules a task, it selects one that requires the minimum amount of data swapping and reuses as much of the data residing in GPU memory as possible. Second, it extends the locality-aware scheduling so that GPUs can execute data prefetching. Prefetching data that are swapped out from a GPU enables efficient use of bottleneck GPU I/O resources. To prefetch the input data of future tasks, it is required to determine the schedule of future tasks. Victream's scheduler (hereafter, the Victream scheduler) extends the locality-aware scheduling so that it can schedule future tasks to enable data prefetching that is executed in the way that minimizes the amount of data I/O of data swapping. Evaluation of a Victream prototype showed that the performance of Victream is better than that of conventional frameworks by up to 117%.

Graphics processing units (GPUs) have been widely adopted to accelerate the training of deep neural networks (DNNs). Although the computational performance of GPUs has been improving steadily, the memory size of modern GPUs is still quite limited, which restricts the sizes of DNNs that can be trained on GPUs, and hence raises serious challenges. This paper introduces a framework, referred to as moDNN (memory optimal DNN training on GPUs), to optimize the memory usage in DNN training. moDNN supports automatic tuning of DNN training code to match any given memory budget (not smaller than the theoretical lower bound). By taking full advantage of overlapping computations and data transfers, we develop new heuristics to judiciously schedule data offloading and prefetching transfers, together with convolution algorithm selection, to optimize memory usage. We further devise a new sub-batch size selection method which also greatly reduces memory usage. moDNN can save memory usage up to 59×, compared with an ideal case which assumes that the GPU memory is sufficient to hold all data. When executing moDNN on a GPU with 12 GB memory, the training time is increased by only 3 percent, which is much shorter than that incurred by the best known approach, vDNN. Furthermore, we propose an optimization strategy for moDNN on multiple GPUs again by utilizing the idea of overlapping data transfers and GPU computations. The results show that 3.7× speedup is attained on four GPUs.

Graphics Processing Units (GPUs) have been successfully used to accelerate scientific applications due to their computation power and the availability of programming languages that make more approachable writing scientific applications for GPUs. However, since the programming model of GPUs requires offloading all the data to the GPU memory, the memory footprint of the application is limited to the size of the GPU memory. Multi-GPU systems can make memory limited problems tractable by parallelizing the computation and data among the available GPUs. Parallelizing applications written for running on single-GPU systems can be done (i) at runtime through an environment that captures the memory operations and kernel calls and distributes among the available GPUs, and (ii) at compile time through a pre-compiler that transforms the application for decomposing the data and computation among the available GPUs. In this paper we propose a framework and implement a tool that transforms an OpenCL application written to run on single-GPU systems into one that runs on multi-GPU systems. Based on data dependencies and data usage analysis, the application is transformed to decompose data and computation among the available GPUs. To reduce the data transfer overhead, computation-communication overlapping techniques are utilized. We tested our tool using two applications with different data transfer requirements, for the application with no data transfer requirements, a linear speedup is achieved, while for the application with data transfers, the computation-communication overlapping reduces the communication overhead by 40%.

Graphics processing units (GPUs) are important components of modern computing devices for not only graphics rendering, but also efficient parallel computations. However, their security problems are ignored despite their importance and popularity. In this paper, we first perform an in-depth security analysis on GPUs to detect security vulnerabilities. We observe that contemporary, widely-used GPUs, both NVIDIA's and AMD's, do not initialize newly allocated GPU memory pages which may contain sensitive user data. By exploiting such vulnerabilities, we propose attack methods for revealing a victim program's data kept in GPU memory both during its execution and right after its termination. We further show the high applicability of the proposed attacks by applying them to the Chromium and Firefox web browsers which use GPUs for accelerating webpage rendering. We detect that both browsers leave rendered webpage textures in GPU memory, so that we can infer which web pages a victim user has visited by analyzing the remaining textures. The accuracy of our advanced inference attack that uses both pixel sequence matching and RGB histogram matching is up to 95.4%.

Abstract. Lagrangian models are fundamental tools to study atmospheric transport processes and for practical applications such as dispersion modeling for anthropogenic and natural emission sources. However, conducting large-scale Lagrangian transport simulations with millions of air parcels or more can become rather numerically costly. In this study, we assessed the potential of exploiting graphics processing units (GPUs) to accelerate Lagrangian transport simulations. We ported the Massive-Parallel Trajectory Calculations (MPTRAC) model to GPUs using the open accelerator (OpenACC) programming model. The trajectory calculations conducted within the MPTRAC model were fully ported to GPUs, i.e., except for feeding in the meteorological input data and for extracting the particle output data, the code operates entirely on the GPU devices without frequent data transfers between CPU and GPU memory. Model verification, performance analyses, and scaling tests of the Message Passing Interface (MPI) – Open Multi-Processing (OpenMP) – OpenACC hybrid parallelization of MPTRAC were conducted on the Jülich Wizard for European Leadership Science (JUWELS) Booster supercomputer operated by the Jülich Supercomputing Centre, Germany. The JUWELS Booster comprises 3744 NVIDIA A100 Tensor Core GPUs, providing a peak performance of 71.0 PFlop s−1. As of June 2021, it is the most powerful supercomputer in Europe and listed among the most energy-efficient systems internationally. For large-scale simulations comprising 108 particles driven by the European Centre for Medium-Range Weather Forecasts' fifth-generation reanalysis (ERA5), the performance evaluation showed a maximum speed-up of a factor of 16 due to the utilization of GPUs compared to CPU-only runs on the JUWELS Booster. In the large-scale GPU run, about 67 % of the runtime is spent on the physics calculations, conducted on the GPUs. Another 15 % of the runtime is required for file I/O, mostly to read the large ERA5 data set from disk. Meteorological data preprocessing on the CPUs also requires about 15 % of the runtime. Although this study identified potential for further improvements of the GPU code, we consider the MPTRAC model ready for production runs on the JUWELS Booster in its present form. The GPU code provides a much faster time to solution than the CPU code, which is particularly relevant for near-real-time applications of a Lagrangian transport model.

3D Freehand Ultrasound Reconstruction of the Carotid Artery.

Lagrangian models are fundamental tools to study atmospheric transport processes and for practical applications such as dispersion modeling for anthropogenic and natural emission sources. However, conducting large-scale Lagrangian transport simulations with millions of air parcels or more can become numerically rather costly. In this study, we assessed the potential of exploiting graphics processing units (GPUs) to accelerate Lagrangian transport simulations. We ported the Massive-Parallel Trajectory Calculations (MPTRAC) model to GPUs using the open accelerator (OpenACC) programming model. The trajectory calculations conducted within the MPTRAC model were fully ported to GPUs, i.e., except for feeding in the meteorological input data and for extracting the particle output data, the code operates entirely on the GPU devices without frequent data transfers between CPU and GPU memory. Model verification, performance analyses, and scaling tests of the MPI/OpenMP/OpenACC hybrid parallelization of MPTRAC were conducted on the JUWELS Booster supercomputer operated by the Jülich Supercomputing Centre, Germany. The JUWELS Booster comprises 3744 NVIDIA A100 Tensor Core GPUs, providing a peak performance of 71.0 PFlop/s. As of June 2021, it is the most powerful supercomputer in Europe and listed among the most energy-efficient systems internationally. For large-scale simulations comprising 108 particles driven by the European Centre for Medium-Range Weather Forecasts' ERA5 reanalysis, the performance evaluation showed a maximum speedup of a factor of 16 due to the utilization of GPUs compared to CPU-only runs on the JUWELS Booster. In the large-scale GPU run, about 67 % of the runtime is spent on the physics calculations, conducted on the GPUs. Another 15 % of the runtime is required for file-I/O, mostly to read the large ERA5 data set from disk. Meteorological data preprocessing on the CPUs also requires about 15 % of the runtime. Although this study identified potential for further improvements of the GPU code, we consider the MPTRAC model ready for production runs on the JUWELS Booster in its present form. The GPU code provides a much faster time to solution than the CPU code, which is particularly relevant for near-real-time applications of a Lagrangian transport model.

SummaryThe stencil pattern is important in many scientific and engineering domains, spurring great interest from researchers and industry. In recent years, various optimizations have been proposed for parallel stencil applications running on graphics processing units (GPUs). In particular, tiling is a technique that can significantly enhance application performance by improving data locality and by reducing the volume of communication between host memory and GPU. In addition, tiling enables stencil applications to process inputs that are larger than the physical GPU memory. However, implementing tiling efficiently is complex, time‐consuming, and error‐prone. In this paper, we propose transparently optimized automatic stencil tiling (TOAST), an automatic tiling mechanism for iterative stencil computations running on GPUs; TOAST has 3 main benefits: (1) It incorporates an optimization model that seeks to maximize data reuse within tiles while respecting the amount of dynamically available GPU memory; (2) it offers a virtualized GPU memory for stencil computations, allowing for large input data; and (3) it performs optimal tiling transparently to the developer of the parallel stencil application. The current implementation of TOAST augments the PSkel framework with an internal solver based on genetic algorithms. Our experimental results show that TOAST improves the performance of iterative stencil applications by up to 13 × compared with their multithreaded (central processing unit–based) optimized versions and up to 48 × compared with a naive tiling approach on GPU. The TOAST mechanism is able to automatically achieve a low percentual overhead of data management compared with actual stencil computation.

In this paper, the methods of implementing neighboring filters on newly supplied Graphics Processing Unit (GPU) are described. In general, neighboring filters are always utilized in image processing. Mainly in consideration of memory accesses, four methods implementing neighboring filtering are proposed and compared. The experimental result shows that one of the proposed methods (called “4X-block”) at the block size of 16 is the fastest among them, when loading and processing data in shared memory in GPU. It is also shown that this method is about 1.45X faster than the basic method implemented on GPU.

In this paper, we present a novel approach to compact the representation, called Combined Bit Map (CBM), which compresses the RDF data and allows the search for the specific terms using Graphics Processing Units (GPUs). Since GPUs have limited memory size, using the CBM structure enables us to put more RDF data in the GPU memory. Further, since GPUs contain many processing elements, utilizing them concurrently will speed up the RDF query processing. The experimental results show that the proposed representation can reduce the size of original RDF data by 70 percent. Furthermore, the search time on such a representation using the GPU is 60 times faster compared to the conventional search time.

We present a GPU-accelerated algorithm for plant growth modeling and visualization. In this algorithm, plant topological structures and geometrical structures are represented separately. Plant topological structures are generated by dual-scale automaton, and geometrical structures are dynamically constructed in parallel by the geometry shader of Graphics Processing Unit (GPU). This scheme greatly reduces the amount of transferred data between main memory and GPU memory, and speeds up plant growth modeling and rendering without compromising image quality. An application for cotton growth modeling and visualization is given in detail to confirm the advantages of the proposed algorithm.

Accelerated graphics cards, or Graphics Processing Units (GPUs), have become ubiquitous in recent years. On the right kinds of problems, GPUs greatly surpass CPUs in terms of raw performance. However, because they are difficult to program, GPUs are used only for a narrow class of special-purpose applications; the raw processing power made available by GPUs is unused most of the time.This paper presents an extension to a Java JIT compiler that executes suitable code on the GPU instead of the CPU. Both static and dynamic features are used to decide whether it is feasible and beneficial to off-load a piece of code on the GPU. The paper presents a cost model that balances the speedup available from the GPU against the cost of transferring input and output data between main memory and GPU memory. The cost model is parameterized so that it can be applied to different hardware combinations. The paper also presents ways to overcome several obstacles to parallelization inherent in the design of the Java bytecode language: unstructured control flow, the lack of multi-dimensional arrays, the precise exception semantics, and the proliferation of indirect references.