Correction of ASCAT, ESA–CCI, and SMAP Soil Moisture Products Using the Multi-Source Long Short-Term Memory (MLSTM)

Using dense soil moisture (SM) measurements in the upper Huai River basin of China, this study evaluated the spatial patterns of L-band satellite-based SM products, including Soil Moisture Active Passive (SMAP) L3, Soil Moisture and Ocean Salinity (SMOS) L3 and the European Space Agency’s Climate Change Initiative (ESA CCI) SM products. The mean difference (MD), root mean squared error (RMSE), unbiased root mean square error (ubRMSE) and Pearson correlation coefficient (R), were used in the evaluation. The evaluation results presented that SMAP and ESA CCI products can well capture the temporal variation of SM at single points quite well, with average R values of 0.51 and 0.46, respectively. And SMAP had the highest overall accuracy among the three satellite-based products in study area. We also analyzed the correlations between the four accuracy indexes and six environmental factors including the proportions of five land use/land cover types (i.e. water bodies, paddy fields, construction land, dryland and forest) and the average NDVI (Normalized Difference Vegetation Index) in 2016 in each grid. Analysis showed that the proportions of paddy fields and water bodies in each grid had significant positive correlations with MD, RMSE and ubRMSE, while NDVI, and the proportions of dryland and construction land had significant negative correlations with these three indexes. The significant correlations between the accuracy of SMAP, SMOS and ESA CCI SM products and environmental factors indicate that there exist systematic biases in these products, which can provide valuable insights into algorithm improvements.

<p>Merging data from different instruments is required to construct long time data records of soil moisture (SM). This is the goal of projects such as the ESA Climate Change Initiative (CCI) for SM (Gruber et al., 2019), which uses both active and passive microwave sensors. Currently, the GLDAS v2.1 model is used as reference to re-scale active and passive time series by matching their Cumulative Density Function (CDF) to that of the model. Removing the dependency on models is important, in particular for data assimilation applications into hydrological or climate models, and it has been proposed (Van der Schalie et al., 2018) to use L-band data from one of the two instruments specifically designed to measure SM, ESA Soil Moisture and Ocean Salinity (SMOS) and NASA Soil Moisture Active Passive (SMAP) satellites, as reference to re-scale other time series.<br>To investigate this approach, AMSR-2 SM time series obtained from C1-, C2- and X-band observations using LPRM (Land Parameter Retrieval Model) were re-scaled by CDF-matching (Brocca et al., 2011) using different SMAP and SMOS official (SMAP L2 V005, SMOS L3 V300, SMOS NRT V100&V200) and research (SMOS IC V103) SM products as well as the SMAP and SMOS LPRM v6 SM data used by the ESA CCI. The time series re-scaled using L-band remote sensing data were compared to those re-scaled using GLDAS and were evaluated against in situ measurements at several hundred sites retrieved from the International Soil Moisture Network (Dorigo et al., 2011). The results were analyzed as a function of the land cover class and the Koppen-Geiger climate classification.<br>Overall, AMSR-2 time series re-scaled using SMAP L2, SMAP LPRM and SMOS IC data sets as reference gave the best correlations with respect to in situ measurements, similar to those obtained by the time series re-scaled using GLDAS and slightly better than those of the original AMSR-2 time series. These results imply that different SMAP and SMOS products could actually be used to replace GLDAS as reference for the re-scaling of other sensors time series within the ESA CCI. However, one must bear in mind that this study is limited to the re-scaling of AMSR-2 data at a few hundred sites.<br>For a more detailed assessment of the L-band data set to be used for a global re-scaling, it is necessary to investigate other effects such as the spatial coverage or the time series length. SMAP spatial coverage is better than that of SMOS in regions affected by radio frequency interference. In contrast, the length of SMAP time series can be too short to capture the long term SM variability for climate applications in some regions. The CDF of SMOS time series computed from the date of SMAP launch is significantly different to those of the full length SMOS time series in some regions of the Globe. Possible ways of using a coherent SMAP/SMOS L-band data set will be discussed.</p>

High-quality and long time-series soil moisture (SM) data are increasingly required for the Qinghai-Tibet Plateau (QTP) to more accurately and effectively assess climate change. In this study, to evaluate the accuracy and effectiveness of SM data, five passive microwave remotely sensed SM products are collected over the QTP, including those from the soil moisture active passive (SMAP), soil moisture and ocean salinity INRA-CESBIO (SMOS-IC), Fengyun-3B microwave radiation image (FY3B), and two SM products derived from the advanced microwave scanning radiometer 2 (AMSR2). The two AMSR2 products are generated by the land parameter retrieval model (LPRM) and the Japan Aerospace Exploration Agency (JAXA) algorithm, respectively. The SM products are evaluated through a two-stage data comparison method. The first stage is direct validation at the grid scale. Five SM products are compared with corresponding in situ measurements at five in situ networks, including Heihe, Naqu, Pali, Maqu, and Ngari. Another stage is indirect validation at the regional scale, where the uncertainties of the data are quantified by using a three-cornered hat (TCH) method. The results at the regional scale indicate that soil moisture is underestimated by JAXA and overestimated by LPRM, some noise is contained in temporal variations in SMOS-IC, and FY3B has relatively low absolute accuracy. The uncertainty of SMAP is the lowest among the five products over the entire QTP. In the SM map composed by five SM products with the lowest pixel-level uncertainty, 66.64% of the area is covered by SMAP (JAXA: 19.39%, FY3B: 10.83%, LPRM: 2.11%, and SMOS-IC: 1.03%). This study reveals some of the reasons for the different performances of these five SM products, mainly from the perspective of the parameterization schemes of their corresponding retrieval algorithms. Specifically, the parameterization configurations and corresponding input datasets, including the land-surface temperature, the vegetation optical depth, and the soil dielectric mixing model are analyzed and discussed. This study provides quantitative evidence to better understand the uncertainties of SM products and explain errors that originate from the retrieval algorithms.

A spatial downscaling method for SMAP soil moisture through visible and shortwave-infrared remote sensing data

Global-scale evaluation of SMAP, SMOS and ASCAT soil moisture products using triple collocation

Time series of soil moisture (SM) data in the Qinghai–Tibet plateau (QTP) covering a period longer than one decade are important for understanding the dynamics of land surface–atmosphere feedbacks in the global climate system. However, most existing SM products have a relatively short time series or show low performance over the challenging terrain of the QTP. In order to improve the spaceborne monitoring in this area, this study presents a random forest (RF) method to rebuild a high-accuracy SM product over the QTP from 19 June 2002 to 31 March 2015 by adopting the advanced microwave scanning radiometer for earth observing system (AMSR-E), and the advanced microwave scanning radiometer 2 (AMSR2), and tracking brightness temperatures with latitude and longitude using the International Geosphere–Biospheres Programme (IGBP) classification data, the digital elevation model (DEM) and the day of the year (DOY) as spatial predictors. Brightness temperature products (from frequencies 10.7 GHz, 18.7 GHz and 36.5 GHz) of AMSR2 were used to train the random forest model on two years of Soil Moisture Active Passive (SMAP) SM data. The simulated SM values were compared with third year SMAP data and in situ stations. The results show that the RF model has high reliability as compared to SMAP, with a high correlation (R = 0.95) and low values of root mean square error (RMSE = 0.03 m3/m3) and mean absolute percent error (MAPE = 19%). Moreover, the random forest soil moisture (RFSM) results agree well with the data from five in situ networks, with mean values of R = 0.75, RMSE = 0.06 m3/m3, and bias = −0.03 m3/m3 over the whole year and R = 0.70, RMSE = 0.07 m3/m3, and bias = −0.05 m3/m3 during the unfrozen seasons. In order to test its performance throughout the whole region of QTP, the three-cornered hat (TCH) method based on removing common signals from observations and then calculating the uncertainties is applied. The results indicate that RFSM has the smallest relative error in 56% of the region, and it performs best relative to the Japan Aerospace Exploration Agency (JAXA), Global Land Data Assimilation System (GLDAS), and European Space Agency’s Climate Change Initiative (ESA CCI) project. The spatial distribution shows that RFSM has a similar spatial trend as GLDAS and ESA CCI, but RFSM exhibits a more distinct spatial distribution and responds to precipitation more effectively than GLDAS and ESA CCI. Moreover, a trend analysis shows that the temporal variation of RFSM agrees well with precipitation and LST (land surface temperature), with a dry trend in most regions of QTP and a wet trend in few north, southeast and southwest regions of QTP. In conclusion, a spatiotemporally continuous SM product with a high accuracy over the QTP was obtained.

The Essential Climate Variable (ECV) soil moisture (SM) datasets, originated from the European Space Agency, have revealed great potential for application in hydrology and agriculture. Hence, it is essential to continuously enhance the data quality and spatial completeness to satisfy the increasing scientific research requirements. In this study, we explore the potential possibility of Soil Moisture Active Passive (SMAP) datasets in filling the gaps of ECV SM. The comprehensive assessment results show that: (1) The data missing percent of gap-filled ECV decreases 20% on average, which can be one step closer to generate a seamlessly covered global land surface SM product with favorable quality. (2) Compared to the original ECV, the gap-filled ECV products express similar good response to the in-situ measurements, suggesting that the SMAP SM products could be taken to efficiently fill the gaps and consistently maintain favorable accuracy at the same time. (3) Compared to the in-situ measurements, the original ECV SM products demonstrate extremely high probability density peak percentages. Fortunately, this eminent high value could be effectively rectified through gap-filling progress using SMAP. Overall, this study conducts objective and detailed evaluation on the performance of applying SMAP to fill the gaps of ECV, and is expected to act as a valuable reference in ECV SM gap-filling method.

High‐precision soil moisture products play an important role in estimating forest carbon storage and carbon emissions in Genhe, China. In this paper, we evaluated the Soil Moisture and Ocean Salinity (SMOS) L3 product, the Soil Moisture Active Passive (SMAP) L3 product, and four soil moisture products derived from the Advanced Microwave Scanning Radiometer 2 (AMSR‐2), i.e., the Dual Channel Algorithm based on the Qp model (QDCA) product, the Japan Aerospace Exploration Agency (JAXA) L3 product, and the Land Parameter Retrieval Model (LPRM) C band and X band products in the Genhe area of China. The results indicated that the root‐mean‐square error (RMSE) and bias of the QDCA product were lower than those of the other AMSR‐2 products, although the QDCA still fell outside of the acceptable range with a volumetric error of no greater than 6%. The JAXA product underestimated the soil moisture and had a constant bias of 0.089–0.099 m3 m−3. The LPRM C‐band and X‐band products had a constant variable season bias of 0.261–0.576 m3 m−3. The quality of the SMOS was better than that of the AMSR‐2 products; however, the results were noisy and unstable. The SMAP was closest to the ground measurements and presented a low RMSE (0.039–0.063 m3 m−3) and bias (0.022–0.050 m3 m−3). Finally, an assessment was performed on the parameters in these soil moisture algorithms.

Abstract. Soil moisture (SM) data records longer than 30 years are critical for climate change research and various applications. However, only a few such long-term global SM datasets exist, and they often suffer from large biases, low spatial resolution, or spatiotemporal incompleteness. Here, we generated a consistent and seamless global surface SM product (0–5 cm) spanning 1982–2021 using a deep learning (DL) model. The model was trained with the GLASS-MODIS SM product and was designed to integrate four decades of Advanced Very High Resolution Radiometer (AVHRR)-derived albedo and land surface temperature, the land component of the fifth generation of European ReAnalysis (ERA5-Land) SM, and terrain and soil texture datasets as input features. Considering the temporal autocorrelation of SM, we explored two types of DL models that are adept at processing sequential data, including three long short-term memory (LSTM)-based models, i.e., the basic LSTM, bidirectional LSTM (Bi-LSTM), and attention-based LSTM (AtLSTM), and a transformer model. We also compared the performance of the DL models with the tree-based eXtreme Gradient Boosting (XGBoost) model, known for its high efficiency and accuracy. Our results show that all four DL models outperformed the benchmark XGBoost model, with the AtLSTM model achieving the highest accuracy on the test set, particularly at high SM levels (>0.4m3m-3). These results suggest that under some challenging conditions, utilizing temporal information and adding an attention module can effectively enhance the estimation accuracy of SM. Subsequent analysis of attention weights revealed that the AtLSTM model could automatically learn the necessary temporal information from adjacent positions in the sequence, which is critical for accurate SM estimation. The best-performing AtLSTM model was then adopted to produce a four-decade seamless global SM dataset at 5 km spatial resolution, denoted as the GLASS-AVHRR SM product. Validation of the GLASS-AVHRR SM product using 45 independent International Soil Moisture Network (ISMN) stations prior to 2000 yielded a median correlation coefficient (R) of 0.73 and an unbiased root mean square error (ubRMSE) of 0.041 m3 m−3. When validated against SM datasets from three post-2000 field-scale COsmic-ray Soil Moisture Observing System (COSMOS) networks, the median R values ranged from 0.63 to 0.79, and the median ubRMSE values ranged from 0.044 to 0.065 m3 m−3. Further validation across 22 upscaled 9 km Soil Moisture Active Passive (SMAP) core validation sites indicated that it could well capture the temporal variations in measured SM and remained unaffected by the large wet biases present in the input ERA5-Land SM product. Moreover, characterized by complete spatial coverage and low biases, this four-decade, 5 km GLASS-AVHRR SM product exhibited high spatial and temporal consistency with the 1 km GLASS-MODIS SM product and contained much richer spatial details than both the long-term ERA5-Land SM product (0.1°) and European Space Agency Climate Change Initiative combined SM product (0.25°). The annual average GLASS-AVHRR SM dataset from 1982 to 2021 is available at https://doi.org/10.5281/zenodo.14198201 (Zhang et al., 2024b), and the complete product can be freely downloaded from https://glass.hku.hk/archive/SM/AVHRR/ (last access: 18 September 2025).

South America (SA) features diverse land cover types and varied climate conditions, both of which significantly influence the variability of soil moisture (SMO). Obtaining ground-truth measurements for SMO is often costly and labor-intensive, and the limited number of ground SMO stations in SA further complicates the evaluation of satellite-derived SMO products. In this work, we proposed an approach that integrates some statistical methods to assess the reliability of Soil Moisture Active Passive (SMAP), the H113 dataset from the Advanced Scatterometer (ASCAT), and Soil Moisture and Ocean Salinity (SMOS) satellite-derived SMO products in SA from 14 May 2015 to 31 December 2016. The integrated methods are error metrics (correlation (R), bias, and ubiased root mean square error (ubRMSE)), Triple Collocation Method (TCM), and Hovmöller diagrams. ERA5 and GLDAS-Noah SM products were used as references for validation. The quality of SMO products was assessed by considering environmental variables, including land cover, vegetation density, and precipitation, within the different climate zones of SA. The results presented that SMAP overall outperforms SMOS and ASCAT, with the highest average correlation (0.55 with GLDAS and 0.61 with ERA5), slight average bias (−0.058 with GLDAS and −0.014 with ERA5), and lowest average ubRMSE (0.045 with GLDAS and 0.041 with ERA5). In arid, semi-arid, and moderate vegetation regions, the SMAP satellite outperforms SMOS and ASCAT, achieving better statistics values with GLDAS and ERA5 datasets, and achieving low error variance and high S/N in the TCM analysis. While the ASCAT H113 product showed good performance, which makes it a good alternative to SMAP, it still has limitations in more dense vegetation regions. SMOS showed the lowest performance across SA, especially in the Amazon basin. The Amazon basin emerges as a critical region where all SMO products displayed a significant SMO variability; however, SMAP showed slightly better results than ASCAT and SMOS. In the absence of ground truths, the proposed approach provides a better evaluation of satellite SMO products. Meanwhile, it provides new spatiotemporal statistical insights into satellite SMO retrieval performance evaluation within diverse climate zones of SA. This research provides valuable guidance for improving SMO monitoring and agricultural management in tropical and semi-arid ecosystems.

Soil moisture impacts the biosphere–atmosphere exchange of CO2 and CH4 and plays an important role in the terrestrial carbon cycle. A better representation of soil moisture would improve coupled carbon–water dynamics in terrestrial ecosystem models and could potentially improve model estimates of large-scale carbon fluxes and climate feedbacks. Here, we investigate using soil moisture observations from the Soil Moisture Active Passive (SMAP) satellite mission to inform simulated carbon fluxes in the global terrestrial ecosystem model LPJ-wsl. Results suggest that the direct insertion of SMAP reduces the bias in simulated soil moisture at in situ measurement sites by 40%, with a greater improvement at temperate sites. A wavelet analysis between the model and measurements from 26 FLUXNET sites suggests that the assimilated run modestly reduces the bias of simulated carbon fluxes for boreal and subtropical sites at 1–2-month time scales. At regional scales, SMAP soil moisture can improve the estimated responses of CO2 and CH4 fluxes to extreme events such as the 2018 European drought and the 2019 rainfall event in the Sudd (Southern Sudan) wetlands. The simulated improvements to land–surface carbon fluxes using the direct insertion of SMAP are shown across a variety of timescales, which suggests the potential of SMAP soil moisture in improving the model representation of carbon–water coupling.

• SMAP brightness temperature ( TB ) scanning gaps were compensated. • Daily variation of TB was analyzed in function of influencing factors. • Seamless TB benefits the refinements of SMAP soil moisture products. Soil Moisture Active Passive (SMAP) satellite was used to monitor global soil moisture and freeze–thaw state using surface brightness temperature (TB). However, due to the limitation of scanning width and shifting track, the daily TB observation had stripe gaps in varying degrees, which imped scientific applications of SMAP official product. To solve this issue, we proposed a temporal fitting algorithm to produce daily seamless TB data over Qinghai-Tibet Plateau (QTP) from 2015 to 2021. This method was composed of two steps: (1) overall time trend fitting which used a spline function to fit the overall mean time trend for each pixel from 2015 to 2021; (2) daily variation correction which accounted for several influential factors including surface temperature, precipitation, and vegetation to establish an Ordinary Least Squares (OLS) model for predicting daily variation of TB in numerous time slices. Consequently, the missing TB observation was reconstructed by combining the overall temporal trend and daily variation. A 10-fold cross-validation and product comparison were carried out to validate the robustness of the proposed method. For cross-validation, we randomly removed available SMAP observations in certain periods as unavailable, and then compared the reconstructed values with the removed practical ones. The cross-validation results indicated the reconstructed TB agreed well with actual SMAP TB, with a high overall coefficient of determination (R 2 = 0.94) and low RMSE (RMSE = 3.7 K), implying the desirable performance of our proposed method. By comparison with Soil Moisture and Ocean Salinity (SMOS) TB, the reconstructed data had an approximate performance with actual SMAP TB. Furthermore, the effects of surface temperature and precipitation on TB in different periods (frozen and unfrozen) over QTP were also analyzed. Our method has the potential to generate seamless SMAP products.

<strong class="journal-contentHeaderColor">Abstract.</strong> Earth's drylands are home to more than two billion people, provide key ecosystem services, and exert a large influence on the trends and variability in Earth's carbon cycle. However, modeling dryland carbon and water fluxes with remote sensing suffers from unique challenges not typically encountered in mesic systems, particularly in capturing soil moisture stress. Here, we develop and evaluate an approach for the joint modeling of dryland gross primary production (GPP), net ecosystem exchange (NEE), and evapotranspiration (ET) in the western United States (US) using a suite of AmeriFlux eddy covariance sites spanning major functional types and aridity regimes. We use artificial neural networks (ANNs) to predict dryland ecosystem fluxes by fusing optical vegetation indices, multitemporal thermal observations, and microwave soil moisture and temperature retrievals from the Soil Moisture Active Passive (SMAP) sensor. Our new dryland ANN (DrylANNd) carbon and water flux model explains more than 70 % of monthly variance in GPP and ET, improving upon existing MODIS GPP and ET estimates at most dryland eddy covariance sites. DrylANNd predictions of NEE were considerably worse than its predictions of GPP and ET likely because soil and plant respiratory processes are largely invisible to satellite sensors. Optical vegetation indices, particularly the normalized difference vegetation index (NDVI) and near-infrared reflectance of vegetation (NIR<span class="inline-formula">_v</span>), were generally the most important variables contributing to model skill. However, daytime and nighttime land surface temperatures and SMAP soil moisture and soil temperature also contributed to model skill, with SMAP especially improving model predictions of shrubland, grassland, and savanna fluxes and land surface temperatures improving predictions in evergreen needleleaf forests. Our results show that a combination of optical vegetation indices and thermal infrared and microwave observations can substantially improve estimates of carbon and water fluxes in drylands, potentially providing the means to better monitor vegetation function and ecosystem services in these important regions that are undergoing rapid hydroclimatic change.

Soil moisture (SM) is a key variable in hydrological processes, bio-ecological processes, and biogeochemical processes. Long-term observations of soil moisture over large areas are critical to research on flooding and drought monitoring, water resource management, and crop yield forecasts. In this paper, Fengyun (FY3B and FY3C) SM products, Japan Aerospace Exploration Agency (JAXA) SM products from the Advanced Microwave Scanning Radiometer 2 (AMSR2), the Land Parameter Retrieval Model (LPRM) AMSR2 L3 SM products, the Version 2 (v2) global land parameter data record (LPDR) of SM products, Soil Moisture Ocean Salinity (SMOS) Centre Aval de Traitement des Donnees SMOS (CATDS) L3 SM products, the Soil Moisture Active Passive (SMAP) passive L3 SM products and the European Space Agency(ESA) Climate Change Initiative (CCI) SM products were evaluated using the ground-based observations in the Little Washita, Fort Cobb and Yanco networks. Long-time series comparison between measured and satellite products was conducted to evaluate the overall performance of FY3 series satellites SM products. Bias (mean bias), R (correlation coefficient), RMSE (root mean square error) and ubRMSE (unbiased root mean square error) were calculated to explore the agreement between satellite products and in-situ measurements. Taylor diagrams were used to compare the performance of various satellite products. The result showed that (1) FY3B, FY3C and LPRM AMSR2 ascending and descending products had an obvious overestimate with in-situ soil moisture in three networks. (2) JAXA AMSR2 ascending and descending products had considerable underestimation in three networks. (3) The validation result of SMOS ascending and descending products over the three networks was satisfactory, with a rather high correlation than other X-band products. (4) The validation result of SMAP ascending and descending products outperformed the other products over the Little Washita and Fort Cobb networks. (5) The ESA CCI product had the lowest values of RMSE and ubRMSE than the other products in the Yanco network, revealing the effectiveness of merging active and passive soil moisture products. (6)The LPDR descending SM products had better performance than the LPDR ascending SM products in the LW and FC networks.

Soil moisture is a vital parameter for a variety of applications including hydrological modelling and climate change studies, particularly in permafrost regions where freeze–thaw processes and complex terrain pose significant monitoring challenges. This study evaluates the accuracy of seven surface soil moisture (SSM) products (SMOS‐IC, ESA CCI, AMSR2 LPRM, SMAP‐L3, SMAP‐L4, ERA5‐Land, GLDAS‐Noah) and three root‐zone soil moisture (RZSM) products (SMAP‐L4, ERA5‐Land, GLDAS‐Noah) using in situ observations from 19 stations in the permafrost region of the Heihe River Basin, China, from 2012 to 2020. Focusing on the thawing season (July–October), the analysis employs statistical metrics including Pearson correlation coefficient (R), unbiased root mean square error (ubRMSE), bias, and slope. Results indicate that SMAP‐L3 and SMAP‐L4 exhibit the highest SSM accuracy ( R = 0.24 and 0.23, respectively) with low ubRMSE (0.037–0.038), while ERA5‐Land shows the best RZSM correlation ( R = 0.43) but may indicate the presence of systematic biases, nonlinear responses, or limitations in dynamic range, among other issues (slope = 0.01). Environmental factors such as precipitation, land surface temperature, and normalised difference vegetation index significantly influence accuracy. Spatial variability and scale mismatches highlight the need for improved land surface models and data assimilation. This study provides critical insights for selecting and refining soil moisture products to enhance hydrological and climate research in permafrost regions.