- Research Article
205
- 10.1016/j.ffa.2013.08.005
A class of three-weight cyclic codes
- Sep 17, 2013
- Finite Fields and Their Applications
- Zhengchun Zhou + 1 more +1
A class of three-weight cyclic codes
Cyclic codes are a subclass of linear codes and have wide applications in consumer electronics, data storage systems, and communication systems as they have efficient encoding and decoding algorithms. In this paper, the two-prime sequence is employed to construct several classes of cyclic codes over GF( <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">q</i> ). Lower bounds on the minimum weight of these cyclic codes are developed. Some of the codes obtained are optimal or almost optimal. The <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">p</i> -ranks of the twin-prime difference sets and a class of almost difference sets are computed.
A class of three-weight cyclic codes
A class of three-weight cyclic codes
On the Ding and Helleseth's 7th open problem about optimal ternary cyclic codes
On the Ding and Helleseth's 7th open problem about optimal ternary cyclic codes
Cyclic codes from cyclotomic sequences of order four
Cyclic codes from cyclotomic sequences of order four
Linear Codes From Some 2-Designs
A classical method of constructing a linear code over $\gf(q)$ with a $t$-design is to use the incidence matrix of the $t$-design as a generator matrix over $\gf(q)$ of the code. This approach has been extensively investigated in the literature. In this paper, a different method of constructing linear codes using specific classes of $2$-designs is studied, and linear codes with a few weights are obtained from almost difference sets, difference sets, and a type of $2$-designs associated to semibent functions. Two families of the codes obtained in this paper are optimal. The linear codes presented in this paper have applications in secret sharing and authentication schemes, in addition to their applications in consumer electronics, communication and data storage systems. A coding-theory approach to the characterisation of highly nonlinear Boolean functions is presented.
Read moreIterative decoding of a class of cyclic codes
Among the classes of LDPC codes that have been constructed and designed, the only class of LDPC codes that are cyclic is the class of codes constructed based on the incidence vectors of lines of finite geometries, called finite geometry LDPC codes. Cyclic finite geometry LDPC codes are known to have large minimum distances and can provide good error performance with very low error-floors using iterative decoding based on belief propagation. Their cyclic structure allows them to be efficiently and systematically encoded with simple shift-registers in linear time with linear complexity. An obvious question is whether, besides cyclic finite geometry LDPC codes, there are other cyclic codes with large minimum distances that can be efficiently decoded iteratively using channel soft information. In this paper, we present one such class of cyclic codes. Codes in this class are two-step majority-logic decodable and they are also constructed based on finite geometries. Two iterative decoding algorithms are devised for this class of cyclic codes and they provide significant coding gain over the two-step majority-logic decoding of codes in this class.
Read moreP-Adic Codes
The p-adic numbers were first considered by Hensel in the 19th century. He observed that the primes play an analogous role in the integers as linear polynomials do in \({\mathbb C}[X]\). The Laurent expansion of a rational function led him to consider the p-adic expansion of a rational number. In this chapter, for a fixed prime p, we will construct block codes over the rings \({\mathbb Z}/p^h{\mathbb Z}\) simultaneously, by constructing codes over the p-adic numbers and then considering the coordinates modulo ph. These codes will be linear over the ring but when mapped to codes over \({\mathbb Z}/p{\mathbb Z}\) will result in codes which are not equivalent to linear codes. We start with a brief introduction to p-adic numbers, which will cover enough background for our purposes. The classical cyclic codes, that we constructed in Chapter 5, lift to cyclic codes over the p-adic numbers. In the case of the cyclic Hamming code, this lift extends to a code over \({\mathbb Z}/4{\mathbb Z}\) which, when mapped to a binary code, gives a non-linear code with a set of parameters for which no linear code exists.
Read moreTernary Linear Codes with Few Weights from Functions with Two Variables
How to construct good linear codes is an important problem in coding theory. This paper considers the construction of linear codes from functions with two variables, presents a class of two-weight and three-weight ternary linear codes and employs the Gauss sums and exponential sums to determine the parameters and weight distribution of these codes. Linear codes with few weights have applications in consumer electronics, communication and date storage systems. Linear codes with two weights have applications in strongly regular graphs and linear codes with three weights can be applied in association schemes.
Read moreON THE SYSTEMATIC ENCODING OF P-ARY REED-SOLOMON CODES WITH AN ARBITRARY PRIME P
The Reed-Solomon (RS) codes, which are a subset of error-correcting codes, are currently employed in a number of significant applications. The most notable of these are data recovery in storage systems, barcodes in management and advertising systems, and communication systems and networks. In the present technological era, RS codes over Galois fields GF(2m) are frequently employed in the aforementioned applications, with GF(28) being the most prevalent. This enables the representation of all 256 values of a byte as a polynomial with eight binary coefficients over GF(28). The motivation for verifying and generalizing the idea of systematic encoding of RS codes in a field with a base p other than 2 stems from the fact that the mathematical dependencies in arbitrary field GF(pm) are not only valid for GF(2m), but also have wider applicability. Consequently, the article establishes the specific features of the systematic encoding of p-ary Reed-Solomon codes and LFSR-based systematic encoder, conceptualizing them as a class of cyclic codes over any field GF(pm) whose base is a prime p other than 2.
Read moreMechanism for Flexible Solar Cells
Flexible photovoltaics are covering the way to low-cost electricity. The build-up of organic, inorganic and organic–inorganic solar cells on flexible substrates by printing technologies is to provide lightweight and economic solar modules that can be incorporated in various surfaces. Progress of flexible and lightweight solar cell is interesting for many terrestrial and space applications that require a very high specific power. Thin-film solar cells on polymer films can produce more than 2KW\\Kg specific power. Flexible solar cells are proposed to open up a numerous of possibilities for enabling new applications in consumer electronics and space satellites. Recent research in thin-film electronics has been concentrated on the replacement of the traditional rigid glass plate substrate with plastic or metallic foils. Organic materials bear the potential to develop a long-term technology that is economically viable for large-scale power generation based on environmentally safe materials with unlimited availability. Organic and organic-inorganic photovoltaics (PVs) (third generation solar cells) continue to attract great attention from the PV community, due to their promising features such as low organic–inorganic cost, flexibility and light weight. In this chapter, many of the possible materials for manufacturing of flexible solar cells are discussed.
Read moreAqueous V2O5/activated carbon zinc-ion hybrid capacitors with high energy density and excellent cycling stability
Hybrid metal-ion capacitors are designed to promote the energy density of supercapacitors with less sacrifice of power density. Zinc-ion hybrid supercapacitor, based on the multivalent ion storage principle, is a kind of energy storage device in which both the high energy density and power density can be achieved. Here, we propose a new configuration of zinc-ion hybrid supercapacitors composed of mild aqueous ZnSO4 electrolyte, activated carbon (AC) anode and V2O5 cathode. The operating voltage of the hybrid supercapacitor can reach to 2 V in the aqueous electrolyte when the mass ratio of AC to V2O5 is 1:1. The maximum energy density of zinc-ion hybrid capacitor is about 3.9 times higher than that of AC symmetric supercapacitor, while its maximum power density is 1.7 times higher than that of zinc-ion battery. The capacity retention of the hybrid supercapacitors is 97.3% over 6000 charge–discharge cycles at 0.5 A g−1. Compared with MnO2 zinc-ion hybrid supercapacitors system, the stable nature of V2O5 allows new zinc-ion hybrid supercapacitors system to achieve a better cycling performance. The unique electrochemical performance, low cost and high safety of the new zinc-ion hybrid supercapacitor endow it with a very wide range of applications in consumer electronics and stationary energy storage.
Read moreTheoretical Research and Scheme Design of Static Polychrome Display Based on Monodisperse Microspheres
Structural colors are produced by precisely designed nanostructures rather than pigments, featuring outstanding energy efficiency, extraordinary vitality and environmental sustainability. This investigation employed monodisperse microspheres for the fabrication of static multi-color displays, leveraging their consistent dimensions and self-assembly capabilities to generate periodic photonic lattices. These structures make controllable Bragg diffraction of dynamically adjustable structural colors possible. Key innovations include: a color control mechanism achieved by precisely modulating the particle diameter (controlling lattice parameters) and comparing the refractive index between the microspheres and the embedding matrix. The pixel visualization strategy, predicated on discrete color regions, is realized through the selective deposition of photonic crystal arrays. This study establishes a theoretical framework via optical diffraction modeling and validates practical methodologies through scalable convective assembly techniques. These advancements provide a powerful platform for the next generation of flexible wearable displays, offering high resolution, mechanical durability and customizable color performance for applications in consumer electronics and biomedical interfaces.
Read moreBlend Performance of LiMn0.7Fe0.3PO4 - LiMn1.9Al0.1O4 Electrodes: Properties Beyond Physical Mixtures?
Lithium-ion battery (LIB) technology is the key enabler of energy storage and electric propulsion. Today´s LIB technology was primarily developed for applications in consumer electronics and is now transferred into automotive applications. These applications demand high specific capacity in order to provide a long driving range as well as high power densities for acceleration, recharging and recuperation. So far, state-of-the-art Lithium-ion batteries do not fully meet the requirements of automotive applications with respect to energy density, power density, extended life time, cost and safety. The commercialized LiFePO4 exhibits good rate capability. Energy density is below that of commercially used layered oxides due to its redox plateau at 3.5 V. A lot of interest is therefore drawn to the isostructural LiMnPO4 due to its higher redox plateau of 4.1 V vs. Li/Li+, which is able to provide higher energy densities [1,2]. Unfortunately, pure LiMnPO4 suffers from low rate capability. On material level, Yamada et al. demonstrated that the partial substitution of manganese in LiMnPO4 with iron, Li(MnxFe1-x)PO4 (LFMP) leads to an improved electrochemical performance and increased energy density [3,4]. On electrode level, a promising strategy to further adjust the electrochemical behavior is to custom-tailor properties by blending complementary types of cathode materials [5-7]. In order to enhance the limited kinetics of manganese based olivine, blending with LiMn2O4-Spinel is expected to result in a promising cathode material for two reasons: a) spinel show fast kinetics, as can be observed from a less pronounced voltage decay at higher C-rates and b) provide a redox plateau in a range comparable to LFMP. Blend electrodes are prepared by mixing the olivine LiFe0.3Mn0.7PO4 (LFMP) and LiMn1.9Al0.1O4 spinel (LMO) in order to obtain a composite electrode, combining the high capacity of LFMP and the rate capability of the spinel. Electrode characteristics are compared with theoretical calculations based on experimental data obtained from electrodes of the single components LFMP and LMO. While tap density of the powders and electrode parameters show a linear dependency on the blend ratio, remarkable synergetic effects can be observed regarding the electrochemical performance at high rates (3C). Potential curves of blend electrodes at rates of 3C reveal a less pronounced voltage decay for the Mn2+/3+plateau than expected from theoretical calculations as depicted in Figure 1a. This buffer effect is also observed for high current pulses (5C) where blend electrodes resemble the behavior of pure spinel electrodes. In terms of power density at high states of charge (SoC), the performance of the investigated blends exceeds even that of pure spinel. In addition, the spinel-related manganese dissolution can be drastically reduced by blending spinel with LFMP. Structural changes in blend electrodes during pulse power discharge of the manganese redox plateau are investigated with in-situ XRD measurements. Shifts in XRD pattern during relaxation (I = 0) gives us indication of particle-to-particle interactions between LFMP and LMO. Figure 1b illustrates a comparison between the battery relevant features of LFMP, spinel and a blend with LFMP:LMO = 50:50 cap%. This study shows the expected and synergetic effects of LFMP/spinel blends and compares the results with theoretical calculations [8]. The complementary properties of the single component materials LFMP and spinel result in a cathode material which can be promising for 48V starter batteries in automotive applications, where high power densities at high states of charge are required in order to start the internal combustion engine.
Read moreA novel DC circuit breaker design using a magnetically coupled-inductor for DC applications
In the attempt to simplify the steps of converting power into its simplest form, new microgrids will be conceptualized in the DC format. Certain power systems and power conversion components are highly available but, as it applies to DC circuit breakers, various designs are currently in the experimental stage. The most significant drawback of such a system is that interrupting current that is without zero crossing causes a sustained power arc. This paper introduces a novel circuit breaker model for DC, which utilizes a coupled inductor circuit breaker, and a mathematical model of insulated gate bipolar transistor (IGBT) has been developed. This Type of DC circuit breaker demonstrates the advantages of its application in consumer electronics.
Read moreApplications of fuzzy sets and approximate reasoning
This paper discusses recent applications of fuzzy sets and the theory of approximate reasoning. The primary focus is on fuzzy logic control (FLC). We begin with a brief history of the key ideas, a survey of recent applications, and a discussion of the genesis of FLC in Japan. We then turn to a study of the general principles of FLC, considering it as a combination of ideas from conventional control theory, artificial intelligence, and fuzzy sets theory. We next provide a detailed analysis of a simple application in consumer electronics, namely, a fuzzy washing machine developed by Hitachi Corporation. In concluding sections we briefly consider other types of applications, including recent work on pilotless helicopters, fuzzy expert systems, and the concept of a fuzzy computer, and we discuss the potential for future developments. It is our opinion that the subject of FLC is still very much in its infancy, and that recent events mark the beginning of an entirely new genre of intelligent control. >
Read moreFoldable Printed Circuit Boards on Paper Substrates
This paper describes several low‐cost methods for fabricating flexible electronic circuits on paper. The circuits comprise i) metallic wires (e.g., tin or zinc) that are deposited on the substrate by evaporation, sputtering, or airbrushing, and ii) discrete surface‐mountable electronic components that are fastened with conductive adhesive directly to the wires. These electronic circuits—like conventional printed circuit boards—can be produced with electronic components that connect on both sides of the substrate. Unlike printed circuit boards made from fiberglass, ceramics, or polyimides, however, paper can be folded and creased (repeatedly), shaped to form three‐dimensional structures, trimmed using scissors, used to wick fluids (e.g., for microfluidic applications) and disposed of by incineration. Paper‐based electronic circuits are thin and lightweight; they should be useful for applications in consumer electronics and packaging, for disposable systems for uses in the military and homeland security, for applications in medical sensing or low‐cost portable diagnostics, for paper‐based microelectromechanical systems, and for applications involving textiles.
Read more