Data Augmentation Using Deep Convolutional Generative Adversarial Network (DCGAN) for Urdu Numerals

One of the major challenges in medical imaging is the limited availability of high-quality datasets. To address this, Generative Artificial Intelligence (Generative AI) offers a promising solution by generating synthetic medical images to augment existing datasets. This study explores the application of Deep Convolutional Generative Adversarial Networks (DCGAN) for data augmentation in CIN imaging. Two training scenarios were implemented: DCGAN with manual data augmentation and another without manual augmentation. The image quality was evaluated using the Fréchet Inception Distance (FID). The results indicate that incorporating data augmentation improves the stability of training and enhances the quality of generated images FID scores of 2.21. In contrast, training DCGAN without manual augmentation resulted in a higher FID score of 2.52, indicating lower image quality. These findings highlight the effectiveness of DCGAN in medical image augmentation and its potential to enhance deep learning-based diagnostic models for cervical cancer detection or classification.

Convolutional Neural Network (CNN) tend to have better results on large data sets and poor performance on small data sets, so the data augmentation is crucial for a CNN to get better performance based on the dataset with limited size. In this paper, Deep Convolution Generative Adversarial Network (DCGAN) was used to augment data to make the AlexNet perform better on an image classification task with small data sets. AlexNet was trained on a small anime face training set with only 160 samples to determine whether the anime face was male or female, and then tested its accuracy on a test set with 240 sample. Then, a pre-trained DCGAN was transferred to train on the male and female training sets respectively. And 2 DCGANs were obtained, one could generate male cartoon faces and another could generate female cartoon faces. The images generated by DCGANs were put in train set, which was used to train AlexNet again and the result was recorded. Other data augmentation methods such as cutout, cutmix and Noise Injection were compared as well. Finally, it is found that AlexNet has the best performance when using the DCGAN augmentation method, which can significantly improve the verification accuracy of the model.

Generative models have been applied in many fields and can be evaluated with many methods. In the evaluation of generative models, the proper evaluation metric varies with the application field. Therefore, the evaluation of generative adversarial networks is inherently challenging. In this study, conditional deep convolutional generative adversarial networks were applied in mechanical fault diagnosis and then evaluated. We proposed three evaluation metrics of conditional deep convolutional generative adversarial networks: Jensen-Shannon divergence, kernel maximum mean discrepancy, and the 1-nearest neighbor classifier which were used to distinguish generated samples from real samples, test mode collapsing and detect overfitting based on the dataset of Electronic Engineering Laboratory of Case Western Reserve University and the planetary gearbox dataset measured in the laboratory. The Jensen-Shannon divergence could not well distinguish generated samples from real samples. However, the two metrics (maximum mean discrepancy and 1-nearest neighbor classifier) well-distinguished generated samples from real samples, thus verifying the applicability of conditional deep convolutional generative adversarial networks in the field of mechanical diagnosis.

Real-time smoke detection is of great significance for early warning of fire, which can avoid the serious loss caused by fire. Detecting smoke in actual scenes is still a challenging task due to large variance of smoke color, texture, and shapes. Moreover, the smoke detection in the actual scene is faced with the difficulties in data collection and insufficient smoke datasets, and the smoke morphology is susceptible to environmental influences. To improve the performance of smoke detection and solve the problem of too few datasets in real scenes, this paper proposes a model that combines a deep convolutional generative adversarial network and a convolutional neural network (DCG-CNN) to extract smoke features and detection. The vibe algorithm was used to collect smoke and nonsmoke images in the dynamic scene and deep convolutional generative adversarial network (DCGAN) used these images to generate images that are as realistic as possible. Besides, we designed an improved convolutional neural network (CNN) model for extracting smoke features and smoke detection. The experimental results show that the method has a good detection performance on the smoke generated in the actual scenes and effectively reduces the false alarm rate.

Accurately identifying and discriminating between different brain states is a major emphasis of functional brain imaging research. Various machine learning techniques play an important role in this regard. However, when working with a small number of study participants, the lack of sufficient data and achieving meaningful classification results remain a challenge. In this study, we employ a classification strategy to explore stress and its impact on spatial activation patterns and brain connectivity caused by the Stroop color-word task (SCWT). To improve our results and increase our dataset, we use data augmentation with a deep convolutional generative adversarial network (DCGAN). The study is carried out at two separate times of day (morning and evening) and involves 21 healthy participants. Additionally, we introduce binaural beats (BBs) stimulation to investigate its potential for stress reduction. The morning session includes a control phase with 10 SCWT trials, whereas the afternoon session is divided into three phases: stress, mitigation (with 16 Hz BB stimulation), and post-mitigation, each with 10 SCWT trials. For a comprehensive evaluation, the acquired fNIRS data are classified using a variety of machine-learning approaches. Linear discriminant analysis (LDA) showed a maximum accuracy of 60%, whereas non-augmented data classified by a convolutional neural network (CNN) provided the highest classification accuracy of 73%. Notably, after augmenting the data with DCGAN, the classification accuracy increases dramatically to 96%. In the time series data, statistically significant differences were noticed in the data before and after BB stimulation, which showed an improvement in the brain state, in line with the classification results. These findings illustrate the ability to detect changes in brain states with high accuracy using fNIRS, underline the need for larger datasets, and demonstrate that data augmentation can significantly help when data are scarce in the case of brain signals.

Due to the real working conditions, the collected mechanical fault datasets are actually limited and always highly imbalanced, which restricts the diagnosis accuracy and stability. To solve these problems, we present an imbalanced fault diagnosis method based on the generative model of conditional-deep convolutional generative adversarial network (C-DCGAN) and provide a study in detail. Deep convolutional generative adversarial network (DCGAN), based on traditional generative adversarial networks (GAN), introduces convolutional neural network into the training for unsupervised learning to improve the effect of generative networks. Conditional generative adversarial network (CGAN) is a conditional model obtained through introducing conditional extension into GAN. C-DCGAN is a combination of DCGAN and CGAN. In C-DCGAN, based on the feature extraction ability of convolutional networks, through the structural optimization, conditional auxiliary generative samples are used as augmented data and applied in machine fault diagnosis. Two datasets (Bearing dataset and Planetary gear box dataset) are carried out to validate. The simulation experiments showed that the improved performance is mainly due to the generated signals from C-DCGAN to balance the dataset. The proposed method can deal with imbalanced fault classification problem much more effectively. This model could improve the accuracy of fault diagnosis and the generalization ability of the classifier in the case of small samples and display better fault diagnosis performance.

Aiming at the issues of low individual identification accuracy of radiation sources under the condition of little samples, this paper proposes a way of individual identification of radiation source based on strengthening global deep convolutional generative adversarial network (SGDCGAN) and deep convolutional neural network (DCNN) to achieve data augmentation. The method first performs IQ map feature splicing processing on the input signal, and then uses DCNN to automatically obtain the deep essential features of the data. Besides, an adaptive improvement is created to the deep convolutional generative adversarial network, and a self‐attention mechanism is introduced into the discriminator and the generator to reinforce the integrity and authenticity of the generated samples. For the common gradient disappearance during model training, the gradient penalty mechanism and spectral normalization are added to make the training process more stable. Through comparison experiments on the collected ADS‐B signals, the experimental results have demonstrated that when the signal‐to‐noise ratio is 0 dB and the number of original samples in each class is 40, the recognition accuracy is improved by 23.6% after doubling the data. Compared with the DCGAN‐DCNN and GAN‐DCNN methods, the recognition accuracy is improved by 3.5% and 4%.

The generation and propagation of internal waves in the ocean are a common phenomenon that plays a pivotal role in the transport of mass, momentum, and energy, as well as in global climate change. Internal waves serve as a critical component of oceanic processes, contributing to the redistribution of heat and nutrients in the ocean, which, in turn, has implications for global climate regulation. However, the automatic identification of internal waves in oceanic regions from remote sensing images has presented a significant challenge. In this research paper, we address this challenge by designing a data augmentation approach grounded in a modified deep convolutional generative adversarial network (DCGAN) to enrich MODIS remote sensing image data for the automated detection of internal waves in the ocean. Utilizing t-distributed stochastic neighbor embedding (t-SNE) technology, we demonstrate that the feature distribution of the images produced by the modified DCGAN closely resembles that of the original images. By using t-SNE dimensionality reduction technology to map high-dimensional remote sensing data into a two-dimensional space, we can better understand, visualize, and analyze the quality of data generated by the modified DCGAN. The images generated by the modified DCGAN not only expand the dataset’s size but also exhibit diverse characteristics, enhancing the model’s generalization performance. Furthermore, we have developed a deep neural network named “WaveNet,” which incorporates a channel-wise attention mechanism to effectively handle complex remote sensing images, resulting in high classification accuracy and robustness. It is important to note that this study has limitations, such as the reliance on specific remote sensing data sources and the need for further validation across various oceanic regions. These limitations are essential to consider in the broader context of oceanic research and remote sensing applications. We initially pre-train WaveNet using the EuroSAT remote sensing dataset and subsequently employ it to identify internal waves in MODIS remote sensing images. Experiments show the highest average recognition accuracy achieved is an impressive 98.625%. When compared to traditional data augmentation training sets, utilizing the training set generated by the modified DCGAN leads to a 5.437% enhancement in WaveNet’s recognition rate.

Deep convolutional generative adversarial networks for the generation of numerous artificial spectrum‐compatible earthquake accelerograms using a limited number of ground motion records

The fault diagnosis of hydrogen sensors is of great significance. However, it is difficult to collect data samples for some modes of hydrogen sensor signals, so the data samples may be unbalanced, which can seriously affect the fault diagnosis results. In this paper, we present a novel convolutional neural network (CNN)-based deep convolutional generative adversarial network (DCG) method (DCG-CNN) for gas sensor fault diagnosis. First, we transform the 1D fault signals of the gas sensor into 2D gray images for end-to-end conversion with no signal data information loss. Second, we use the DCG to enrich the 2D gray images of small fault data samples, which results in balanced sensor fault datasets. Third, we use the CNN method to improve the accuracy of fault diagnosis. In order to understand the internal mechanism of the CNN, we further visualize the learned feature maps of fault data samples in each layer of the CNN and try to analyze the reasons for the method's high performance. The fault diagnosis accuracy of the DCG-CNN is shown to be higher than that of other traditional methods.

As a key safety component of automobiles, automobile steering knuckles must be subjected to strict quality control. Currently, the identification of cracks in finished products primarily relies on manual identification of fluorescent penetrant detection. Owing to the complex shape of the workpiece, the interference of the displayed image and the small sample size, the accuracy of the automatic discrimination result of the fluorescent penetrant detection image is directly reduced. Therefore, this study proposed a data augmentation method based on deep convolutional generative adversarial networks (DCGAN) for crack identification in automotive steering knuckle fluorescent penetration inspection images. An image acquisition platform was built for fluorescence penetration detection of automobile steering knuckles, and fluorescence display images of various parts of the workpiece were collected. Based on the feature analysis of the displayed image, the image was preprocessed to suppress relevant interference and extract crack candidate regions. Further, using the original crack image to train DCGAN, several crack image samples were generated, the ResNet network was trained with the expanded dataset, and the extracted candidate regions were identified. Finally, the experimental results show that the recall rate of the crack recognition method used in this paper is 95.1%, and the accuracy rate is 90.8%, which can better identify the crack defects in the fluorescent penetrant inspection image, compared with the non-generative data enhancement method.

Gastric cancer has a high mortality rate worldwide, but it can be prevented with early detection through regular gastroscopy. Herein, we propose a deep learning-based computer-aided diagnosis (CADx) system applying data augmentation to help doctors classify gastroscopy images as normal or abnormal. To improve the performance of deep learning, a large amount of training data are required. However, the collection of medical data, owing to their nature, is highly expensive and time consuming. Therefore, data were generated through deep convolutional generative adversarial networks (DCGAN), and 25 augmentation policies optimized for the CIFAR-10 dataset were implemented through AutoAugment to augment the data. Accordingly, a gastroscopy image was augmented, only high-quality images were selected through an image quality-measurement method, and gastroscopy images were classified as normal or abnormal through the Xception network. We compared the performances of the original training dataset, which did not improve, the dataset generated through the DCGAN, the dataset augmented through the augmentation policies of CIFAR-10, and the dataset combining the two methods. The dataset combining the two methods delivered the best performance in terms of accuracy (0.851) and achieved an improvement of 0.06 over the original training dataset. We confirmed that augmenting data through the DCGAN and CIFAR-10 augmentation policies is most suitable for the classification model for normal and abnormal gastric endoscopy images. The proposed method not only solves the medical-data problem but also improves the accuracy of gastric disease diagnosis.

Training and testing unmanned vehicles need various real data. However, data of some special or dangerous testing environment may not be accessible, or may only be accessible at certain times. So, using generative adversarial networks to learn the real traffic scene and generate a new scene is an effective way of solving the problem. In this paper, a framework of deep convolutional generative adversarial networks (DCGAN) was used to generate new traffic scene images and videos. Firstly, 300 sets of videos and images of overtaking scenes were selected as training data. A generator with convolutional neural network was used to generate samples. Then the training data and the generated samples were trained in a two-class discriminator that provides the probabilities of the samples that come from the generated sample and the training data respectively. Then the generator was updated by back propagation algorithm. Afterward, a new sample was generated and trained in the discriminator again. Repeated several times, a serial of generated samples were generated, the probability distribution of which is basically the same as the training data. The experiments show that this method can effectively generate realistic traffic scene images and videos.

Fire detection technologies remain a critical component of building automation. With the recent significant advances in computer vision, visual fire detection methods have been developed and integrated into building surveillance systems. Overfitting and accuracy challenges remain in fire detection when training datasets are limited. In this work, we tackle these challenges by developing a deep convolutional generative adversarial network (DCGAN) for highly accurate visual fire detection when training images are limited. Our model addresses three types of errors in visual fire detection with small training datasets: model overfitting, fire probability overestimation, and fire probability underestimation. The DCGAN includes a generator of fake fire images for self-supervised learning (SSL) and a discriminator for image classification. We designed computational experiments with high-quality datasets to test and validate our model against other supervised learning approaches. We also benchmarked the performance of the DCGAN against a best-in-class deep visual fire detection model. The results show that our model significantly outperforms other fire detection models on all performance metrics when trained with the same small dataset. The results demonstrate that the DCGAN effectively mitigates the three types of error when the training dataset is limited.

Reconstruction of the meso-scale concrete model using a deep convolutional generative adversarial network (DCGAN)