Data-oriented description of texture-dependent anisotropic material behavior

Aim: The majority of machine learning (ML) models in healthcare are built on retrospective data, much of which is collected without explicit patient consent for use in artificial intelligence (AI) and ML applications. The primary aim of this study was to evaluate whether clinicians and scientific researchers themselves consent to provide their own data for the training of ML models. Materials and Methods: This survey was conducted through an anonymous online survey, utilizing platforms such as Telegram, LinkedIn, and Viber. The target audience comprised specific international groups, primarily Russian, German, and English-speaking, of clinicians and scientific researchers. These participants ranged in their levels of expertise and experience, from beginners to veterans. The survey centered on a singular, pivotal question: “Do You Consent to the Use of Your Biological and Private Data for Training Machine Learning and AI Models?” Respondents had the option to choose from three responses: “Yes” and “No”. Results: The survey was conducted in January 2024. A total of 119 unique and verified individuals participated in the survey. The results revealed that only 50% of respondents (63 persons) expressed consent to provide their own data for the training of ML and AI models. Conclusion: In the development of ML and AI models, particularly open-source ones, it is crucial to ascertain whether participants are willing to provide their private data. While ML algorithms can transform the nature of data, it is important to remember that the primary owner of this data is the individual. Our findings show that in 50% of the cases, even participants from scientific research and clinical backgrounds – individuals typically accountable for ensuring data quality in AI and ML model development – do not consent to the use of their data in AI and ML settings. This highlights the need for more stringent consent processes and ethical considerations in the utilization of personal data in AI and ML research.

Accurate estimation of reference evapotranspiration (ETo) plays a vital role in irrigation and water resource planning. The Penman–Monteith method recommended by the Food and Agriculture Organization (FAO PM56) is widely used and considered a standard to calculate ETo. However, FAO PM56 cannot be used with limited meteorological variables, so it is compulsory to choose an alternative model for ETo estimation, which requires fewer variables. This study built ten machine learning (ML) models based on multi-function, neural network, and tree-based structure against the FAO PM56 method. For this purpose, time series temperature data on a monthly scale are only used to train ML models. The developed ML models were applied to estimate ETo at different test stations and the obtained results were compared with the FAO PM56 method to verify and validate their performance in ETo estimation for the selected stations. In addition, multiple statistical indicators, including root-mean-square error (RMSE), coefficient of determination (R2), mean absolute error (MAE), Nash–Sutcliffe efficiency (NSE), and correlation coefficient (r) were calculated to compare the performance of each ML model on ETo estimation. Among the applied ML models, the ETo tree boost (TB) ML model outperformed the other ML models in estimating ETo in diverse climatic conditions based on statistical indicators (R2, NSE, r, RMSE, and MAE). Moreover, the observed R2, NSE, and r were the highest for the TB ML model, while RMSE and MAE were found to be the lowest at the study sites compared to other applied ML models. Lastly, ETo point data yielded from the TB ML model was used in an interpolation process to create monthly and annual ETo maps. Based on the ETo maps, this study suggests mainly a focus on areas with high ETo values and proper irrigation scheduling of crops to ensure water sustainability.

This paper analyzes the optimization features of machine learning (ML) model training procedures using multi-GPU systems to enhance cyber security in telecommunication networks. A key aspect of the study is the use of data parallelism, which allows the distribution of the training load across multiple GPUs, significantly reducing training time and improving model accuracy-critical factors for rapid threat detection in cyberspace. A novel approach for optimizing data batch size using Mutual Information (MI) is proposed, which harmonizes the utilization of computational resources with the information content of the training data. MI helps to determine the optimal data batch size that minimizes training errors and improves model accuracy without a significant increase in training time. Experimental results demonstrate the substantial advantages of multi-GPU configurations compared to single-GPU setups, providing faster training and improved model accuracy. It was particularly emphasized that MI-guided batch size tuning significantly outperforms traditional manual tuning methods, ensuring higher validation accuracy and reducing training time. The study showed that the MI-based approach is an effective tool for addressing the problem of optimizing ML model training processes in real-world scenarios where cyber security is critical. The proposed methods allow ML models to train faster and more accurately identify potential threats, making them particularly relevant for telecommunication networks where a rapid response to new threats in real time is required. The implementation of modern computational technologies such as multi-GPU systems and MI-optimized training enhances the efficiency and accuracy of machine learning models. This, in turn, improves cyber security measures and ensures a more reliable defence of telecommunication networks against malicious attacks. It is noted that the proposed approaches can be adapted not only for cyber security but also for other areas where high model accuracy and fast training are important. Future research prospects include the development of new machine learning methods, particularly deep neural networks, the exploration of alternative computational architectures such as quantum computing or distributed systems, and their integration into real-time systems. Special attention should be paid to the ethical aspects of implementing automated cyber security systems, particularly in preventing bias in algorithms and ensuring fairness in their application.

This paper provides an overview of the following three modeling approaches – Physics-based Modeling, Machine Learning, and Hybrid Modeling (Physics-based Modeling & Machine Learning combined), and addresses their applicability for multiphase flow simulations in specific use-cases. Physics-based modeling builds on well understood concepts in, e.g., thermodynamics, fluid dynamics, fluid modeling and optimization techniques. It requires deep domain knowledge as well as accurate fluid data and may incur significant computational cost. Machine Learning systems are based on learning algorithms, which find relationships between sensor data and output variables in a training dataset. The approach requires a good understanding of the learning algorithms and statistics. Small datasets or changes in operational conditions limit the suitability of this approach. Hybrid Models combine Physics with Machine Learning, and these models are on a sliding scale between pure Physics-based Models and pure Machine Learning Models. The individual use-case defines how the Hybrid Model is configured and where it sits on the sliding scale. Here, we will investigate three different use-cases: Physics supporting Machine Learning: Use physics to generate data to support training of machine learning models when data is sparse. Machine Learning supporting Physics: Use machine learning to provide additional input to physics modeling when available data does not suffice to achieve accurate numerical solutions. True Hybrid: Close the circle and use physics for feature engineering to improve the machine learning models, which then provide synthetic data as input to physics-based simulations. We observe that there is not one universal solution. On the one hand, flow simulations may address situations which are stochastic in nature and not deterministic. Here, a machine learning model based on physics-based simulations fits the purpose well. On the other hand, there are situations when machine learning can deduce relations between parameters such that you can provide additional input into physics-based models. One such example is to address the oil-water split at very high water cuts. By adopting the appropriate combination, the hybrid approach results in superior accuracy and offers the ability to address a broader range of applications than physics or machine learning alone.

<p>Background: The prediction of aneurysm treatment outcomes can help to optimize the treatment strategies. Machine learning (ML) has shown positive results in many clinical areas. However, the development of such models requires expertise in ML, which is not an easy task for surgeons.</p><p>Objectives: The recently emerged automated machine learning (AutoML) has shown promise in making ML more accessible to non-computer experts. We aimed to evaluate the feasibility of applying AutoML to develop the ML models for treatment outcome prediction.</p><p>Methods: The patients with aneurysms treated by endovascular treatment were prospectively recruited from 2016 to 2020. Treatment was considered successful if angiographic complete occlusion was achieved at follow-up. A statistical prediction model was developed using multivariate logistic regression. In addition, two ML models were developed. One was developed manually and the other was developed by AutoML. Three models were compared based on their area under the precision-recall curve (AUPRC) and area under the receiver operating characteristic curve (AUROC).</p><p>Results: The aneurysm size, stent-assisted coiling (SAC), and posterior circulation were the three significant and independent variables associated with treatment outcome. The statistical model showed an AUPRC of 0.432 and AUROC of 0.745. The conventional manually trained ML model showed an improved AUPRC of 0.545 and AUROC of 0.781. The AutoML derived ML model showed the best performance with AUPRC of 0.632 and AUROC of 0.832, significantly better than the other two models.</p><p>Conclusions: This study demonstrated the feasibility of using AutoML to develop a high-quality ML model, which may outperform the statistical model and manually derived ML models. AutoML could be a useful tool that makes ML more accessible to the clinical researchers.</p>

Fatal accidents are a major issue hindering the wide acceptance of safety-critical systems that employ machine learning and deep learning models, such as automated driving vehicles. In order to use machine learning in a safety-critical system, it is necessary to demonstrate the safety and security of the system through engineering processes. However, thus far, no such widely accepted engineering concepts or frameworks have been established for these systems. The key to using a machine learning model in a deductively engineered system is decomposing the data-driven training of machine learning models into requirement, design, and verification, particularly for machine learning models used in safety-critical systems. Simultaneously, open problems and relevant technical fields are not organized in a manner that enables researchers to select a theme and work on it. In this study, we identify, classify, and explore the open problems in engineering (safety-critical) machine learning systems—that is, in terms of requirement, design, and verification of machine learning models and systems—as well as discuss related works and research directions, using automated driving vehicles as an example. Our results show that machine learning models are characterized by a lack of requirements specification, lack of design specification, lack of interpretability, and lack of robustness. We also perform a gap analysis on a conventional system quality standard SQuaRE with the characteristics of machine learning models to study quality models for machine learning systems. We find that a lack of requirements specification and lack of robustness have the greatest impact on conventional quality models.

The pooled cohort equations (PCE) predict atherosclerotic cardiovascular disease (ASCVD) risk in patients with characteristics within prespecified ranges and has uncertain performance among Asians or Hispanics. It is unknown if machine learning (ML) models can improve ASCVD risk prediction across broader diverse, real-world populations. We developed ML models for ASCVD risk prediction for multi-ethnic patients using an electronic health record (EHR) database from Northern California. Our cohort included patients aged 18 years or older with no prior CVD and not on statins at baseline (n = 262,923), stratified by PCE-eligible (n = 131,721) or PCE-ineligible patients based on missing or out-of-range variables. We trained ML models [logistic regression with L2 penalty and L1 lasso penalty, random forest, gradient boosting machine (GBM), extreme gradient boosting] and determined 5-year ASCVD risk prediction, including with and without incorporation of additional EHR variables, and in Asian and Hispanic subgroups. A total of 4309 patients had ASCVD events, with 2077 in PCE-ineligible patients. GBM performance in the full cohort, including PCE-ineligible patients (area under receiver-operating characteristic curve (AUC) 0.835, 95% confidence interval (CI): 0.825–0.846), was significantly better than that of the PCE in the PCE-eligible cohort (AUC 0.775, 95% CI: 0.755–0.794). Among patients aged 40–79, GBM performed similarly before (AUC 0.784, 95% CI: 0.759–0.808) and after (AUC 0.790, 95% CI: 0.765–0.814) incorporating additional EHR data. Overall, ML models achieved comparable or improved performance compared to the PCE while allowing risk discrimination in a larger group of patients including PCE-ineligible patients. EHR-trained ML models may help bridge important gaps in ASCVD risk prediction.

A machine learning model exploring creep performance of dental composites.

Reconstructing the emergence of the modern continental crust is crucial to understand the evolution of the crust, the onset of plate tectonics, elemental cycling, and long-term climate. However, it remains highly contentious about when and how the major subaerial continental crust emerged over time. Here, we used a machine learning (ML) model (XGBoost) to reveal the exposed history of continental crust over the last 3.8 billion years ago (Ga). First, we compiled ~10,000 modern subaerial or submarine basalts with major and trace elements to train the ML model. Then, the trained ML model (with resampling) was utilized to predict and calculate the mean proportions of subaerially erupted continental basaltic rocks since 3.8 Ga. The result suggested that the subaerial proportion only reached about 50% at ~2.5 Ga, indicating the exposure of the continental crust was far from the present-day level at the end of the Archean era. On the other hand, since ~1.8 Ga, the subaerial proportion of the continental crust exhibited a dynamic balance between ~60% and 80%, reaching the present-day level.

HADA: An automated tool for hardware dimensioning of AI applications

Federated learning enables privacy-preserving and data-efficient dimension prediction and part qualification across additive manufacturing factories

Real-world data is dirty, which causes serious problems in (supervised) machine learning (ML). The widely used practice in such scenario is to first repair the labeled source (a.k.a. train) data using rule-, statistical- or ML-based methods and then use the "repaired" source to train an ML model. During production, unlabeled target (a.k.a. test) data will also be repaired, and is then fed in the trained ML model for prediction. However, this process often causes a performance degradation when the source and target datasets are dirty with different noise patterns , which is common in practice. In this paper, we propose an adaptive data augmentation approach, for handling missing data in supervised ML. The approach extracts noise patterns from target data, and adapts the source data with the extracted target noise patterns while still preserving supervision signals in the source. Then, it patches the ML model by retraining it on the adapted data, in order to better serve the target. To effectively support adaptive data augmentation, we propose a novel generative adversarial network (GAN) based framework, called DAGAN, which works in an unsupervised fashion. DAGAN consists of two connected GAN networks. The first GAN learns the noise pattern from the target, for target mask generation. The second GAN uses the learned target mask to augment the source data, for source data adaptation. The augmented source data is used to retrain the ML model. Extensive experiments show that our method significantly improves the ML model performance and is more robust than the state-of-the-art missing data imputation solutions for handling datasets with different missing value patterns.

Machine learning (ML) models based on a large data set of in-cylinder flow fields of an IC engine obtained by high-speed particle image velocimetry allow the identification of relevant flow structures underlying cycle-to-cycle variations of engine performance. To this end, deep feature learning is employed to train ML models that predict cycles of high and low in-cylinder maximum pressure. Deep convolutional autoencoders are self-supervised-trained to encode flow field features in low dimensional latent space. Without the limitations ascribable to manual feature engineering, ML models based on these learned features are able to classify high energy cycles already from the flow field during late intake and the compression stroke as early as 290 crank angle degrees before top dead center ([Formula: see text]) with a mean accuracy above chance level. The prediction accuracy from [Formula: see text] to [Formula: see text] is comparable to baseline ML approaches utilizing an extensive set of engineered features. Relevant flow structures in the compression stroke are revealed by feature analysis of ML models and are interpreted using conditional averaged flow quantities. This analysis unveils the importance of the horizontal velocity component of in-cylinder flows in predicting engine performance. Combining deep learning and conventional flow analysis techniques promises to be a powerful tool for ultimately revealing high-level flow features relevant to the prediction of cycle-to-cycle variations and further engine optimization.

Laser processes have proved to be very successful in many fields of production technology with the exception of forming, as for instance deep drawing or bending of sheet metals, although in the latter case bending around very small angles by inducing thermal tensions with a laser has found some applications. The latter lack of applications in forming is caused by the fact that plastic deformation asks for strong mechanical forces that cannot be generated with lasers. Nevertheless, the necessary forces can be strongly reduced by a selective laser heating of the workpiece in those regions, where the strongest deformations take place - in the case of bending around the bending edge - thus leading to softening of the material in these regions and facilitating deformation, finally reducing the necessary forces.The latter concept of laser assisted forming has been applied to bending and deep drawing of sheet metals with the main result that not only the forces necessary for the forming process are reduced, but that it is also possible to obtain forming without cracks and rupture even in the case of materials that are difficult to form at room temperature due to their brittle nature, as for instance Titanium. Moreover, experiments have shown that considerably stronger deformations can be obtained as in cold working. Compared to hot working, where the whole workpiece is heated, important technological advantages are obtained, as a reduction of processing time and a lack of surface degradation. In view of these advantages laser assisted forming could widen the limits of forming technology and also open new fields for beneficial laser applications.Laser processes have proved to be very successful in many fields of production technology with the exception of forming, as for instance deep drawing or bending of sheet metals, although in the latter case bending around very small angles by inducing thermal tensions with a laser has found some applications. The latter lack of applications in forming is caused by the fact that plastic deformation asks for strong mechanical forces that cannot be generated with lasers. Nevertheless, the necessary forces can be strongly reduced by a selective laser heating of the workpiece in those regions, where the strongest deformations take place - in the case of bending around the bending edge - thus leading to softening of the material in these regions and facilitating deformation, finally reducing the necessary forces.The latter concept of laser assisted forming has been applied to bending and deep drawing of sheet metals with the main result that not only the forces necessary for the forming process are reduced, but ...

Two-dimensional layered electrically conductive metal–organic frameworks (EC MOFs) have emerged as promising materials for electronic and energy applications due to their tunable electronic properties and structural versatility. Here, we employ machine learning (ML) models to predict the thermodynamic stability and electronic properties of EC MOFs, significantly reducing the dependence on costly ab initio calculations. We construct different feature sets by integrating compositional features from generic statistical reduction methods along with structural descriptors curated from the EC-MOF database (termed GD, M-GD, and A-GD features). Various ML models, including linear, tree-based, and ensemble learning approaches, are benchmarked for predicting formation energies of EC MOFs, as one measure of synthesizability, as well as predicting their electrically conductive nature. The density functional theory data pool spans the 536 monolayer systems in the EC-MOF database, divided into 90% training and 10% test sets. Our results demonstrate that ML models treated by proper feature engineering can achieve very high accuracy for formation energy prediction, with the coefficient of determination, R2, being as high as 0.96. Via proper feature engineering, we also report up to 92% accuracy in predicting the metallicity of EC MOFs and 82% in bandgap classification using the extra tree classifier. The trained ML models are further applied to a new class of EC MOFs, which are neither part of the training nor members of the EC-MOF database, showcasing their predictive power and transferability. This work establishes the foundations of a data-driven framework for accelerating the discovery of novel EC MOFs in future research.