Data recovery in wireless sensor networks using Markov random field model

A Technique of Filtering Dirty Data Based on Temporal- Spatial Correlation in Wireless Sensor Network

Data collection plays an important role in wireless sensor networks. Recovery of spatio-temporal data from incomplete sensing data is vital to the network lifetime. Many works have utilized the spatial and temporal correlations to achieve satisfactory data recovery results. However, these methods introduce large computational overhead at the fusion center. In this paper, we develop an ADMM-Net framework for correlated spatio-temporal data recovery. Both the spatial correlation and temporal correlation of sensing data are considered in a convex optimization problem, which is solved by the alternating direction method of multipliers (ADMM) algorithm. We then unfold the ADMM algorithm into a fixed-length neural network that reduces the iterations dramatically and does not require additional location information of nodes. Experimental results on a realworld dataset demonstrate that the proposed method can achieve faster convergence speed than the baseline ADMM algorithm with slight accuracy loss.

For the purpose of saving the resources of wireless sensor networks, it is necessary to fuse the existing data in wireless sensor networks. When using the current method to fuse data in wireless sensor networks, the fusing time is too long to remove the noise signal in wireless sensor networks effectively. In the process of fusing, data packet loss is easy to occur. There are some problems such as low fusion efficiency, poor denoising performance and high packet loss rate. A multi-path data hierarchical fusion method based on routing algorithm is proposed in this paper. The redundant node decision method based on mesh partitioning is combined with the grid algorithm and EECRS protocol to establish a routing protocol based on redundant node elimination, and the redundant data existing in the redundant nodes of the wireless sensor network is removed. Based on the statistical data of the data, the probability density function is deduced and analyzed, and the noise filtering matrix is constructed to optimize the measurement matrix and remove the noise existing in the wireless sensor network. The multi-path scheduling technology is used to synthesize the pheromone table and the data forwarding flow table, and the ant is used to actively monitor the link QOS real-time information in the path finding process to update the pheromone table and the flow table, and calculate the link idle rate according to the update result. According to the calculation result, the data transmission path is selected, and the multi-path data layer fusion is completed. The experimental results show that the proposed method has high fusion efficiency, good denoising performance and low packet loss rate.

In wireless sensor network, the storage amount of information is high, and the transmission and scheduling of control information is reasonable. The node communication model, network structure model, and energy consumption model are constructed. On this basis, the high-density data in wireless sensor network are scheduled to optimize the time for nodes to perform tasks. The nodes in the network are fully scheduled to control the generation time of packets in the network and the generation time of packets in the network. Experimental results show that in different iterations, the proposed method has lower node delay and node energy consumption, with values less than 0.2 and 2, respectively, and the maximum data fusion quality can reach 98, with high fusion benefits, so as to improve the transmission and scheduling efficiency and quality of high-density data in wireless sensor network.

Classification of sensory data is a major research problem in wireless sensor networks and it can be widely used in reducing the data transmission in wireless sensor networks effectively and also in process monitoring. In order to examine the huge size of data set in stream model generated by sensor network, it will be analyzed different sensor's output signal, topology of sensors network, number of sensor parameters and number of acquisition data. In our wind energy monitoring, sensor node monitors six attributes: speed, direction, temperature, pressure, humidity, and battery voltage. Every attribute value is set as four measures: average, instantaneous, minimum, and maximum. This paper presents several data mining techniques applied on the wireless sensor network's data considered: Naïve Bayes, k-nearest neighbor, decision trees, IF-THEN rules, and neural networks. Before classification, the data was clustered in order to be labeled. A similarity based algorithm, k-means, was selected in the clustering process for its simplicity and efficiency. A conclusion that decision trees are a suitable method to classify the large amount of data considered is made finally according to the mining result and its reasonable explanation.

In this paper propose an several concepts for optimal algorithm of aggregation of data in wireless sensor network. Given analysis of problems for information aggregation in wireless sensor network. Proposed optimise of structure the node and given basic concepts for reducing energy consumption. Also proposed network partitioning into piconet with next clustering. In final proposed are two modifications for ant algorithms to optimize data collection in wireless sensor network.

With the limited resources, it is difficult for wireless sensor network to achieve a long time, continuous, high-speed acquisition of multimedia information and a real-time, reliable transmission of high-volume sampling data. This article proposed the novel data acquisition strategy based on compressed sensing theory, which can perfectly achieve the long time, real-time, reliable transmission of high-volume multimedia data in wireless sensor network. Reasonable experiments were designed to verify the effectiveness of the algorithms, and the experiment results show that: the proposed multimedia signal acquisition strategy is reasonable, practicable, and more suitable for the wireless multimedia sensor networks.

In Wireless Sensor Networks (WSNs), performance and availability are important in providing Quality of Service (QoS). WSNs are prone to failures that may result from software and hardware malfunctions, battery drain, tampering and link failures. In addition, sensors are resource constrained in terms of inadequate processing capacity, limited storage memory and restricted power supply. Alternating sensor operations between sleep and active modes whilst saving energy, has also introduced more challenges to the performance and dependability of WSN systems. This paper therefore seeks to investigate performance and availability concerns resulting from link and node failures in addition to the buffer restrictions and challenges caused by alternating sensor operations between active and sleep states. First, a finite queue capacity analytical model integrating performance and availability in the presence of node and channel failures and repairs is developed. Using the model, we analyse performance and availability of WSNs in terms of network throughput, delays and dependability. Finally, the model is used to evaluate tradeoffs between performance metrics. The analytical solutions using Spectral Expansion and Kolmogorov Forward equations as well as the simulation results are in good agreement.

Wireless Sensor Networks (WSNs) are being used globally in many areas. As the purpose of the WSN is raising at the similar rate the safety intimidation are also rising. Nodes in a WSN are vulnerable to different attacks mainly due to their unguarded communication and nature of exploitation. Therefore, the most important in such networks is to providing security. A vigorous security solution for the networks must also make possible node confirmation. But occasionally it would be an energy utilizing process. So, we require an energy efficient and safe mechanism to protected the entire network. Thus this paper, Energy Aware efficient Cryptographic Approach (EACA) for securing data in WSN is proposed. In this scheme, the dynamic mode and sleep mode of sensor to save the energy consumption in WSN. The sender side and receiver side algorithm provide the data security. Our simulation results demonstrate that improved the residual energy and throughput in WSN.

In this paper, the reliability of data transmission in social networks is thoroughly studied and analyzed using wireless sensor network topology technology. This paper, based on the introduction of sensor network reliability analysis-related technology, combined with the characteristics, and needs of the sensor network itself, focuses on the study of the reliability analysis of the sensor network under the state of perturbation scheme. Based on the idea of making full use of data changes to respond to the sensor state, this paper takes the actual monitoring data of the wireless sensor network as the research object, selects the temporal correlation and spatial correlation of the measured environmental data as the reliability index by extracting the features of the wireless sensor network data, and proposes the Evidential reasoning rule- (ER-) based wireless sensor network data reliability assessment model based on Evidential reasoning rule (ER) is proposed. The data are mined, analyzed, and quantified from the perspective of content popularity, and the interest indicators of nodes on data under content popularity are analyzed to derive stable interest quantification values. Combined with the network properties, i.e., node autoassembly community, we analyze the data dissemination characteristics of social networks in wireless sensor network topology environment and derive the upper and lower bounds of data transmission capacity under node interest-driven and its variation on network performance. Social relationships among nodes affected by social attributes are considered; in turn, the data forwarding behavior of nodes is modeled using data transmission probability and data reception probability; finally, the data forwarding process is analyzed and a closed expression for the average end-to-end transmission capacity is derived in turn.

In this paper, we study two problems of providing reliable data transmission and developing aggregation techniques for correlated data in wireless sensor networks. A system with forward error correction (FEC) can provide an objective reliability while using less transmission power than a system without FEC. Because of the additional parity bits and encoding/decoding energy consumptions, we study the effect of FEC on energy efficiency. We propose to use LDPC codes for FEC. We show that wireless sensor networks using LDPC codes are almost 45% more energy efficient than those that use BCH codes, which were shown to be 15% more energy efficient than the best performing convolutional codes. Then we study the problem of providing aggregation for two and three correlated nodes in wireless sensor networks. We propose to use LDPC codes in wireless sensor networks for source and channel coding to obtain a two-fold energy savings. For two correlated nodes, we study both distributed source coding and joint source-channel coding. While distributed source coding using LDPC codes was studied before, joint source-channel coding using LDPC codes is introduced for the first time. The difference between our work in distributed source coding using LDPC codes and the previous work lies in the LDPC code design procedure. The simulation results show that our proposed design criteria improves the performance of the source coding. The convergence of the non-uniform LDPC code of our design technique is almost 60% closer to the Slepian-Wolf limit. For three correlated nodes, we study distributed source coding using LDPC codes. We simplified the problem of design procedure to randomly punctured LDPC codes. This is a new approach for designing LDPC codes and the simulation results for code of length 1000 shows that the convergence of the LDPC code is achieved at compression rate 0.3174 which is only 0.08 away from the Slepian-Wolf limit.

Wireless sensor networks (WSNs) are an important means of collecting data in a variety of situations, such as the monitoring of large or hazardous areas. The retrieval of WSN data can yield better results through the use of unmanned aerial vehicles (UAVs), for example, concerning the increase in the amount of data collected and the decrease in the time between the collection and use of the data. In particular, disaster areas may be left without communication resources and with high residual risk to humans, at which point a WSN can be quickly launched by air to collect relevant data until other measures can be established. The set of rules of each problem’s component (e.g., number of UAVs, UAVs dislocation control, sensors, communication) is considered the approaches to solve the problem. In this meaning, some studies present approaches for the use of UAVs for the collection of WSN data, focusing primarily on optimizing the path to be covered by a single UAV and relying on long-range communication that is always available; these studies do not explore the possibility of using several UAVs or the limitations on the range of communication. This work describes DADCA, a distributed scalable approach capable of coordinating groups of UAVs in WSN data collection with restricted communication range and without the use of optimization techniques. The results reveal that the amount of data collected by DADCA is similar or superior to path optimization approaches by up to 1%. In our proposed approach, the delay in receiving sensor messages is up to 46% shorter than in other approaches, and the required processing onboard UAVs can reach less than 75% of those using optimization-based algorithms. The results indicate that the DADCA can match and even surpass other presented approaches, since the path optimization is not a focus, while also incorporating the advantages of a distributed approach.

Wireless Sensor and Actor Networks (WSANs) have received increased attention from the research community in the recent years. This is mainly because as an extension to Wireless Sensor Networks(WSN), they have the ability to actively participate in the environment trough the actors. However, this introduces new challenges as to how to transfer commands between nodes, actors and central station who may be from different manufacturers and use different communication protocols. Another important aspect is the ability of the WSAN to present the data to the interested party or to receive the command from the operator, and do this with in the simplest and most user friendly way as possible. In this paper we propose architecture for interconnection between different layers of WSANs and the central stations that would allow building a simple interface that would ease the operation with WSANs in view of Control and Data Acquisition.

Data aggregation processes aim to reduce the amount of exchanged data in wireless sensor networks and consequently minimize the packet overhead and optimize energy efficiency. Securing the data aggregation process is a real challenge since the aggregation nodes must access the relayed data to apply the aggregation functions. The data aggregation security problem has been widely addressed in classical homogeneous wireless sensor networks, however, most of the proposed security protocols cannot guarantee a high level of security since the sensor node resources are limited. Heterogeneous wireless sensor networks have recently emerged as a new wireless sensor network category which expands the sensor nodes’ resources and capabilities. These new kinds of WSNs have opened new research opportunities where security represents a most attractive area. Indeed, robust and high security level algorithms can be used to secure the data aggregation at the heterogeneous aggregation nodes which is impossible in classical homogeneous WSNs. Contrary to the homogeneous sensor networks, the data aggregation security problem is still not sufficiently covered and the proposed data aggregation security protocols are numberless. To address this recent research area, this paper describes the data aggregation security problem in heterogeneous wireless sensor networks and surveys a few proposed security protocols. A classification and evaluation of the existing protocols is also introduced based on the adopted data aggregation security approach.

Wireless sensor networks (WSNs) are vulnerable, that is, they can be physically or remotely exposed to destructive effects. In other words, security is critical in many wireless sensor network applications. Sensor readings are used to locate events such as fires, floods, etc. Because wireless sensor networks are vulnerable, there is a need to protect the network by detecting the introduction of false data. We have developed an algorithm to identify and fix malicious data in the network. The developed optimized swarm intelligence algorithm is applied to different datasets to analyze its performance. A simulator is used to test the algorithm. The analysis and simulation results show the detection and correction of malicious data in wireless sensor networks. In this paper we test simulation of data injection attack in WSN and reach the accuracy of 95% using Matlab.