Data_Sheet_1.pdf

Spiking Neural Networks (SNNs) have emerged as an attractive alternative to traditional deep learning frameworks, since they provide higher computational efficiency in event driven neuromorphic hardware. However, the state-of-the-art (SOTA) SNNs suffer from high inference latency, resulting from inefficient input encoding and training techniques. The most widely used input coding schemes, such as Poisson based rate-coding, do not leverage the temporal learning capabilities of SNNs. This paper presents a training framework for low-latency energy-efficient SNNs that uses a hybrid encoding scheme at the input layer in which the analog pixel values of an image are directly applied during the first timestep and a novel variant of spike temporal coding is used during subsequent timesteps. In particular, neurons in every hidden layer are restricted to fire at most once per image which increases activation sparsity. To train these hybrid-encoded SNNs, we propose a variant of the gradient descent based spike timing dependent backpropagation (STDB) mechanism using a novel cross entropy loss function based on both the output neurons' spike time and membrane potential. The resulting SNNs have reduced latency and high activation sparsity, yielding significant improvements in computational efficiency. In particular, we evaluate our proposed training scheme on image classification tasks from CIFAR-10 and CIFAR-100 datasets on several VGG architectures. We achieve top-l accuracy of 66.46% with 5 timesteps on the CIFAR-100 dataset with ~125x less compute energy than an equivalent standard ANN. Additionally, our proposed SNN performs 5–300 x faster inference compared to other state-of-the-art rate or temporally coded SNN models.

Bio-inspired Active Learning method in spiking neural network

Spiking Neural Networks (SNNs), widely known as the third generation of neural networks, encode input information temporally using sparse spiking events, which can be harnessed to achieve higher computational efficiency for cognitive tasks. However, considering the rapid strides in accuracy enabled by state-of-the-art Analog Neural Networks (ANNs), SNN training algorithms are much less mature, leading to accuracy gap between SNNs and ANNs. In this paper, we propose different SNN training methodologies, varying in degrees of biofidelity, and evaluate their efficacy on complex image recognition datasets. First, we present biologically plausible Spike Timing Dependent Plasticity (STDP) based deterministic and stochastic algorithms for unsupervised representation learning in SNNs. Our analysis on the CIFAR-10 dataset indicates that STDP-based learning rules enable the convolutional layers to self-learn low-level input features using fewer training examples. However, STDP-based learning is limited in applicability to shallow SNNs (≤4 layers) while yielding considerably lower than state-of-the-art accuracy. In order to scale the SNNs deeper and improve the accuracy further, we propose conversion methodology to map off-the-shelf trained ANN to SNN for energy-efficient inference. We demonstrate 69.96% accuracy for VGG16-SNN on ImageNet. However, ANN-to-SNN conversion leads to high inference latency for achieving the best accuracy. In order to minimize the inference latency, we propose spike-based error backpropagation algorithm using differentiable approximation for the spiking neuron. Our preliminary experiments on CIFAR-10 show that spike-based error backpropagation effectively captures temporal statistics to reduce the inference latency by up to 8× compared to converted SNNs while yielding comparable accuracy

Machine learning applications that are implemented with spike-based computation model, e.g., Spiking Neural Network (SNN), have a great potential to lower the energy consumption when they are executed on a neuromorphic hardware. However, compiling and mapping an SNN to the hardware is challenging, especially when compute and storage resources of the hardware (viz. crossbar) need to be shared among the neurons and synapses of the SNN. We propose an approach to analyze and compile SNNs on a resource-constrained neuromorphic hardware, providing guarantee on key performance metrics such as execution time and throughput. Our approach makes the following three key contributions. First, we propose a greedy technique to partition an SNN into clusters of neurons and synapses such that each cluster can fit on to the resources of a crossbar. Second, we exploit the rich semantics and expressiveness of Synchronous Dataflow Graphs (SDFGs) to represent a clustered SNN and analyze its performance using Max-Plus Algebra, considering the available compute and storage capacities, buffer sizes, and communication bandwidth. Third, we propose a self-timed execution-based fast technique to compile and admit SNN-based applications to a neuromorphic hardware at run-time, adapting dynamically to the available resources on the hardware. We evaluate our approach with standard SNN-based applications and demonstrate a significant performance improvement compared to current practices.

Spiking neural network (SNN) has drawn research interests as it mimics dynamic activities of human brain and has the potential to perform real-time cognitive tasks. However, latency, throughput and flexibility of existing hardware implemented SNNs are limited. The conventional rate coding is inefficient in terms of accuracy and latency. Oversimplified SNN models adopted by neuromorphic hardware discard characteristics such as neuron dynamics and filter effects etc., which are critical for neural information processing. Recent research advancements show that the potential of SNN can be better utilized by moving beyond rate-based model and considering temporal information embedded in the spike sequences. However, these works employ complex biologically realistic SNN models, posing challenges to hardware complexity. Furthermore, most existing neuromorphic hardware are developed for specific SNN models, or aiming at replicating biological behaviors. There is a lack of general methodology for SNN design optimization. Novel hardware architecture and systematic optimization techniques are required for efficient FPGA implementation and support flexible SNN models. To address above issues, in this work we proposed a holistic optimization framework for encoder, model, and architecture design of FPGA based neuromorphic hardware. We present an efficient neural coding scheme and training algorithm, which can optimize encoder parameters to enable fast inference. A flexible and hardware-friendly model is proposed, in which SNNs are represented as a network of Infinite Impulse Response (IIR) filters. Finally, an end-to-end framework is developed to optimize and deploy FPGA implementation. Experimental results show our work achieves state-of-the-art accuracy in various classification tasks, and outperforms various platforms including CPU, GPU and dedicated neuromorphic processors in terms of latency and throughput.

As the desire for biologically realistic spiking neural networks (SNNs) increases, tuning the enormous number of open parameters in these models becomes a difficult challenge. SNNs have been used to successfully model complex neural circuits that explore various neural phenomena such as neural plasticity, vision systems, auditory systems, neural oscillations, and many other important topics of neural function. Additionally, SNNs are particularly well-adapted to run on neuromorphic hardware that will support biological brain-scale architectures. Although the inclusion of realistic plasticity equations, neural dynamics, and recurrent topologies has increased the descriptive power of SNNs, it has also made the task of tuning these biologically realistic SNNs difficult. To meet this challenge, we present an automated parameter tuning framework capable of tuning SNNs quickly and efficiently using evolutionary algorithms (EA) and inexpensive, readily accessible graphics processing units (GPUs). A sample SNN with 4104 neurons was tuned to give V1 simple cell-like tuning curve responses and produce self-organizing receptive fields (SORFs) when presented with a random sequence of counterphase sinusoidal grating stimuli. A performance analysis comparing the GPU-accelerated implementation to a single-threaded central processing unit (CPU) implementation was carried out and showed a speedup of 65× of the GPU implementation over the CPU implementation, or 0.35 h per generation for GPU vs. 23.5 h per generation for CPU. Additionally, the parameter value solutions found in the tuned SNN were studied and found to be stable and repeatable. The automated parameter tuning framework presented here will be of use to both the computational neuroscience and neuromorphic engineering communities, making the process of constructing and tuning large-scale SNNs much quicker and easier.

Recent advancements in spiking neural networks (SNNs) have highlighted their advantages, including energy efficiency, real-time processing, and compatibility with neuromorphic hardware. These features make SNNs particularly well-suited for human-robot interaction (HRI) in rehabilitative wearable robotics, where real-time adaptability and low power consumption are essential. However, there is still a lack of comprehensive reviews on SNNs’ application to HRI. This paper addresses this gap by providing a detailed overview of the latest advancements in SNNs from the perspective of embodied intelligence in rehabilitative wearable robots. We systematically examine recent progress in SNNs, including spiking neuron models, encoding methods, and learning mechanisms. These advancements are then analyzed with a focus on HRI, addressing specific challenges in rehabilitative wearable robots from three key perspectives: human motion decoding, robotic control, and neuromorphic implementation for embedded systems. By reviewing current research, this paper highlights the potential benefits and limitations of SNNs in achieving embodied intelligence and identifies crucial areas for further investigation, offering new insights and directions for their future applications in rehabilitative wearable robotics.

Spiking neural networks (SNNs) have attracted many researchers’ interests due to its biological plausibility and event-driven characteristic. In particular, recently, many studies on high-performance SNNs comparable to the conventional analog-valued neural networks (ANNs) have been reported by converting weights trained from ANNs into SNNs. However, unlike ANNs, SNNs have an inherent latency that is required to reach the best performance because of differences in operations of neuron. In SNNs, not only spatial integration but also temporal integration exists, and the information is encoded by spike trains rather than values in ANNs. Therefore, it takes time to achieve a steady-state of the performance in SNNs. The latency is worse in deep networks and required to be reduced for the practical applications. In this work, we propose a pre-charged membrane potential (PCMP) for the latency reduction in SNN. A variety of neural network applications (e.g., classification, autoencoder using MNIST and CIFAR-10 datasets) are trained and converted to SNNs to demonstrate the effect of the proposed approach. The latency of SNNs is successfully reduced without accuracy loss. In addition, we propose a delayed evaluation method (DE), by which the errors during the initial transient are discarded. The error spikes occurring in the initial transient is removed by DE, resulting in the further latency reduction. DE can be used in combination with PCMP for further latency reduction. Finally, we also show the advantages of the proposed methods in improving the number of spikes required to reach a steady-state of the performance in SNNs for energy-efficient computing.

Efficiently solving combinatorial optimization problems (COPs) such as Max-Cut is challenging because the resources required increase exponentially with the problem size. This study proposes a hardware-friendly method for solving the Max-Cut problem by implementing a spiking neural network (SNN)-based Boltzmann machine (BM) in neuromorphic hardware systems. To implement the hardware-oriented version of the spiking Boltzmann machine (sBM), the stochastic dynamics of leaky integrate-and-fire (LIF) neurons with random walk noise are analyzed, and an innovative algorithm based on overlapping time windows is proposed. The simulation results demonstrate the effective convergence and high accuracy of the proposed method for large-scale Max-Cut problems. The proposed method is validated through successful hardware implementation on a 6-transistor/2-resistor (6T2R) neuromorphic chip with phase change memory (PCM) synapses. In addition, as an expansion of the algorithm, several annealing techniques and bias split methods are proposed to improve convergence, along with circuit design ideas for efficient evaluation of sampling convergence using cell arrays and spiking systems. Overall, the results of the proposed methods demonstrate the potential of energy-efficient and hardware-implementable approaches using SNNs to solve COPs. To the best of the author's knowledge, this is the first study to solve the Max-Cut problem using an SNN neuromorphic hardware chip.

Epilepsy is a global chronic disease that brings pain and inconvenience to patients, and an electroencephalogram (EEG) is the main analytical tool. For clinical aid that can be applied to any patient, an automatic cross-patient epilepsy seizure detection algorithm is of great significance. Spiking neural networks (SNNs) are modeled on biological neurons and are energy-efficient on neuromorphic hardware, which can be expected to better handle brain signals and benefit real-world, low-power applications. However, automatic epilepsy seizure detection rarely considers SNNs. In this article, we have explored SNNs for cross-patient seizure detection and discovered that SNNs can achieve comparable state-of-the-art performance or a performance that is even better than artificial neural networks (ANNs). We propose an EEG-based spiking neural network (EESNN) with a recurrent spiking convolution structure, which may better take advantage of temporal and biological characteristics in EEG signals. We extensively evaluate the performance of different SNN structures, training methods, and time settings, which builds a solid basis for understanding and evaluation of SNNs in seizure detection. Moreover, we show that our EESNN model can achieve energy reduction by several orders of magnitude compared with ANNs according to the theoretical estimation. These results show the potential for building high-performance, low-power neuromorphic systems for seizure detection and also broaden real-world application scenarios of SNNs.

Spiking neural network (SNN) distinguish themselves from artificial neural network (ANN) because of their inherent temporal processing and spike-based computations, enabling a power-efficient implementation in neuromorphic hardware. In this study, we demonstrate that data processing with spiking neurons can be enhanced by co-learning the synaptic weights with two other biologically inspired neuronal features: (1) a set of parameters describing neuronal adaptation processes and (2) synaptic propagation delays. The former allows a spiking neuron to learn how to specifically react to incoming spikes based on its past. The trained adaptation parameters result in neuronal heterogeneity, which leads to a greater variety in available spike patterns and is also found in the brain. The latter enables to learn to explicitly correlate spike trains that are temporally distanced. Synaptic delays reflect the time an action potential requires to travel from one neuron to another. We show that each of the co-learned features separately leads to an improvement over the baseline SNN and that the combination of both leads to state-of-the-art SNN results on all speech recognition datasets investigated with a simple 2-hidden layer feed-forward network. Our SNN outperforms the benchmark ANN on the neuromorphic datasets (Spiking Heidelberg Digits and Spiking Speech Commands), even with fewer trainable parameters. On the 35-class Google Speech Commands dataset, our SNN also outperforms a GRU of similar size. Our study presents brain-inspired improvements in SNN that enable them to excel over an equivalent ANN of similar size on tasks with rich temporal dynamics.

Spiking neural networks (SNNs) have shown great potential as a solution for realizing ultralow-power consumption on neuromorphic hardware, but obtaining deep SNNs is still a challenging problem. Existing network conversion methods can effectively obtain SNNs from the trained convolutional neural networks (CNNs) with little performance loss, however, high-precision weights in the converted SNNs would take up high-storage space nonamicable to limited memory resources. To tackle this problem, we analyze the relationship between weights and thresholds of spiking neurons and propose an efficient weights-threshold balance conversion method to obtain SNNs with binary weights, resulting in a significant memory storage reduction. The experimental results evaluated with various network structures on benchmark data sets show that the binary SNN not only needs much less memory resources compared to its high-precision counterpart but also achieves the high-recognition accuracy comparable to other state-of-the-art SNNs.

Batch Normalization (BN) techniques have been proposed to reduce the so-called Internal Covariate Shift (ICS) by attempting to keep the distributions of layer outputs unchanged. Experiments have shown their effectiveness on training deep neural networks. However, since only the first two moments are controlled in these BN techniques, it seems that a weak constraint is imposed on layer distributions and furthermore whether such constraint can reduce ICS is unknown. Thus this paper proposes a measure for ICS by using the Earth Mover (EM) distance and then derives the upper and lower bounds for the measure to provide a theoretical analysis of BN. The upper bound has shown that BN techniques can control ICS only for the outputs with low dimensions and small noise whereas their control is not effective in other cases. This paper also proves that such control is just a bounding of ICS rather than a reduction of ICS. Meanwhile, the analysis shows that the high-order moments and noise, which BN cannot control, have great impact on the lower bound. Based on such analysis, this paper furthermore proposes an algorithm that unitizes the outputs with an adjustable parameter to further bound ICS in order to cope with the problems of BN. The upper bound for the proposed unitization is noise-free and only dominated by the parameter. Thus, the parameter can be trained to tune the bound and further to control ICS. Besides, the unitization is embedded into the framework of BN to reduce the information loss. The experiments show that this proposed algorithm outperforms existing BN techniques on CIFAR-10, CIFAR-100 and ImageNet datasets.

Spiking Neural Networks (SNNs) mimic the behavior of biological neurons. Unlike traditional Artificial Neural Networks (ANNs) that operate in a continuous time domain and use activation functions to process information, SNNs operate discrete event-driven, where data is encoded and communicated through spikes or discrete events. This unique approach offers several advantages, such as efficient computation and lower power consumption, making SNNs particularly attractive for energy-constrained and neuromorphic applications. However, training SNNs poses significant challenges due to the discrete nature of spikes and the non-differentiable behavior they exhibit. As a result, converting pre-trained ANNs into SNNs has gained attention as a convenient approach. While this approach simplifies the training process, it introduces certain drawbacks, including high latency. The conversion of ANNs to SNNs typically leads to a loss of accuracy, which can be attributed to various factors, including quantization, clipping, and timing errors. Previous studies have proposed techniques to mitigate quantization and clipping errors during the conversion process. However, they do not consider timing errors, degrading SNN accuracies at low latency conditions. This work introduces the MiCE conversion method, which offers a comprehensive joint optimization strategy to simultaneously alleviate quantization, clipping, and timing errors. At a moderate latency of 8 time-steps, our converted ResNet-20 achieves classification accuracies of 79.02% and 95.74% on the CIFAR-100 and CIFAR-10 datasets, respectively.

A forecast-based STDP rule suitable for neuromorphic implementation