DCSim: Design Analysis on Virtualization Data Center

Dynamic adaptive streaming over HTTP (DASH) technique, the most popular streaming method, requires a large number of hard disk drives (HDDs) to store multiple bitrate versions of many videos, consuming significant energy. A solid-state drive (SSD) can be used to cache popular videos, thus reducing HDD energy consumption by allowing I/O requests to be handled by an SSD, but this requires effective HDD power management due to limited SSD bandwidth. We propose a new SSD cache management scheme to minimize the energy consumption of a video storage system with heterogeneous HDDs. We first present a technique that caches files with the aim of saving more HDD energy as a result of I/O processing on an SSD. Based on this, we propose a new HDD power management algorithm with the goal of increasing the number of HDDs operated in low-power mode while reflecting the heterogeneous HDD power characteristics. For this purpose, it assigns a separate parameter value to each I/O task based on the ratio of HDD energy to bandwidth and greedily selects the I/O tasks handled by the SSD within limits on its bandwidth. Simulation results show that our scheme consumes between 12% and 25% less power than alternative schemes under the same HDD configuration.

Recently, solid state drives (SSDs) are replacing hard disk drives (HDDs) in datacenter storage systems in order to reduce power consumption and improve I/O performance. Additionally, in order to mitigate the performance bottleneck at I/O interface between host and SSD, the PCIe-leveraging NVMe SSD is emerging for datacenter SSDs. The NVMe interface supports the I/O virtualization mechanism called single root I/O virtualization (SR-IOV), which is a device self-virtualization technique for supporting direct paths from virtual machines (VMs) to I/O devices. Multiple virtual machines can share an SR-IOV-supporting physical device without intervention of virtual machine monitor. SR-IOV-supporting SSD should provide a device-level scheduler which can schedule the requests from multiple VMs considering performance isolation and fairness. In this paper, we propose a workload-aware budget compensation scheduling algorithm for the device-level request scheduler. To guarantee the performance isolation, the device-level scheduler estimates the contribution on the garbage collection (GC) cost of each virtual machine in the SSD device. Based on the estimated GC contributions, the budget of each VM is compensated for performance isolation. We experimented the effects of the proposed technique with an SSD simulator. The experiments showed that the scheduler can guarantee the performance isolation when multiple VMs share an NVMe SSD with different workloads.

Log-Structure Merge tree (LSM-tree) has been one of the mainstream indexes in key-value systems supporting a variety of write-intensive Internet applications in today’s data centers. However, the performance of LSM-tree is seriously hampered by constantly occurring compaction procedures, which incur significant write amplification and degrade the write throughput. To alleviate the performance degradation caused by compactions, we introduce a lightweight compaction tree (LWC-tree), a variant of LSM-tree index optimized for minimizing the write amplification and maximizing the system throughput. The lightweight compaction drastically decreases write amplification by appending data in a table and only merging the metadata that have much smaller size. Using our proposed LWC-tree, we have implemented three key-value LWC-stores on different storage mediums including Shingled Magnetic Recording (SMR) drives, Solid State Drives (SSD), and conventional Hard Disk Drives (HDDs). The LWC-store is particularly optimized for SMR drives, as it eliminates the multiplicative I/O amplification from both LSM-trees and SMR drives. Due to the lightweight compaction procedure, LWC-store reduces the write amplification by a factor of up to 5× compared to the popular LevelDB key-value store. Moreover, the random write throughput of the LWC-tree on SMR drives is significantly improved by up to 467% even compared with LevelDB on conventional HDDs. Furthermore, LWC-tree has wide applicability and delivers impressive performance improvement in various conditions, including different storage mediums (i.e., SMR, HDD, SSD) and various value sizes and access patterns (i.e., uniform and Zipfian).

When originally introduced, flash based solid state drives (SSD) exhibited a very high random read throughput with low sub-millisecond latencies. However, in addition to their steep prices, SSDs suffered from slow write rates and reliability concerns related to cell wear. For these reasons, they were relegated to a niche status in the consumer and personal computer market. Since then, several architectural enhancements have been introduced that led to a substantial increase in random write operations as well as a reasonable improvement in reliability. From a purely performance point of view, these high I/O rates and improved reliability make the SSDs an ideal choice for enterprise On-Line Transaction Processing (OLTP) applications. However, from a price/performance point of view, the case for SSDs may not be clear. Enterprise class SSD Price/GB, continues to be at least 10x higher than conventional magnetic hard disk drives (HDD) despite considerable drop in Flash chip prices. We show that a complete replacement of traditional HDDs with SSDs is not cost effective. Further, we demonstrate that the most cost efficient use of SSDs for OLTP workloads is as an intermediate persistent cache that sits between conventional HDDs and memory, thus forming a three-level memory hierarchy. We also discuss two implementations of such cache: hardware or software. For the software approach, we discuss our implementation of such a cache in an inhouse database system. We also describe off-the shelf hardware solutions. We will develop a Total Cost of Ownership (TCO) model for All-SSD and All-HDD configurations. We will also come up with a modified OLTP benchmark that can scale IO density to validate this model. We will also show how such SSD cache implementations could increase the performance of OLTP applications while reducing the overall system cost.

Fast network quality analysis in the telecom industry is an important method used to provide quality service. SK Telecom, based in South Korea, built a Hadoop-based analytical system consisting of a hundred nodes, each of which only contains hard disk drives (HDDs). Because the analysis process is a set of parallel I/O intensive jobs, adding solid state drives (SSDs) with appropriate settings is the most cost-efficient way to improve the performance, as shown in previous studies. Therefore, we decided to configure SSDs as a write-through cache instead of increasing the number of HDDs. To improve the cost-per-performance of the SSD cache, we introduced a selective I/O bypass (SIB) method, redirecting the automatically calculated number of read I/O requests from the SSD cache to idle HDDs when the SSDs are I/O over-saturated, which means the disk utilization is greater than 100 percent. To precisely calculate the disk utilization, we also introduced a combinational approach for SSDs because the current method used for HDDs cannot be applied to SSDs because of their internal parallelism. In our experiments, the proposed approach achieved a maximum 2x faster performance than other approaches.

Flash-based Solid State Drive (SSD) has been productively shipped and deployed in large scale storage systems. However, a single flash-based SSD cannot satisfy the capacity, performance and reliability requirements of the modern storage systems that support increasingly demanding data-intensive computing applications. Applying RAID schemes to SSDs to meet these requirements, while a logical and viable solution, faces many challenges. In this article, we propose a Hybrid Parity-based Disk Array architecture (short for HPDA), which combines a group of SSDs and two hard disk drives (HDDs) to improve the performance and reliability of SSD-based storage systems. In HPDA, the SSDs (data disks) and part of one HDD (parity disk) compose a RAID4 disk array. Meanwhile, a second HDD and the free space of the parity disk are mirrored to form a RAID1-style write buffer that temporarily absorbs the small write requests and acts as a surrogate set during recovery when a disk fails. The write data is reclaimed to the data disks during the lightly loaded or idle periods of the system. Reliability analysis shows that the reliability of HPDA, in terms of MTTDL (Mean Time To Data Loss), is better than that of either pure HDD-based or SSD-based disk array. Our prototype implementation of HPDA and the performance evaluations show that HPDA significantly outperforms either HDD-based or SSD-based disk array.

The need for performance has motivated the increasing adoption of solid-state drives (SSD) both in personal computers and data centers. However, the high cost per gigabyte and reduced lifetime hinder the thorough replacement of hard disk drives (HDD) with SSDs. To mitigate these issues, several architectures have been conceived based on hybrid storage systems, but performance and dependability models have not been proposed to better assess such different architectures. This paper presents an approach based on stochastic models for performance and availability modeling of hybrid storage systems, using stochastic Petri nets (SPN) and reliability block diagrams (RBD). A case study based on OpenStack Swift platform is adopted to demonstrate the feasibility of the proposed approach.

Recent advancements in flash-based solid state drive (SSD) make it a highly desirable storage device, especially for data-intensive applications. There are significant more SSDs used in data centers and high performance computing systems. SSDs perform one or two orders better than traditional hard disk drives generally. However, the performance of random writes on SSDs, especially small random writes, is still largely limited due to the garbage collection (GC) process. Existing work tried to utilize the on-device RAM as a write cache to improve the write performance, however directly utilizing it as a normal write cache under utilizes the RAM cache. In this poster, we present our initial study of a cache management scheme that hides the GC latency.

Application launch times can be reduced by using low-capacity solid-state drives (SSDs) in combination with the conventional magnetic hard disk drives (HDDs). We propose a storage tiering scheme for a logically integrated hybrid disk that eliminates the requirement to store a block-mapping table on the SSDs, as well as the need to access this table for every I/O: these characteristics distinguish our scheme from most other SSD caching and driver-level tiering schemes. A heuristic identifies the disk blocks accessed during application launches, which are then moved from HDDs to SSDs by updating file-system pointers. In experiments with eight widely used applications, launch times were reduced by an average of 56 %, and our scheme outperformed the Linux DM-Cache by 6.5% on average. Because it runs as a background process, the block migration overhead is negligible. We also propose edge-block first and shortest sequence and long seek first (SSLSF) strategies for using limited SSD space effectively. Small collections of blocks, which have to be dispatched to the device driver together, are preferentially moved to the SSD especially when those blocks incur long seek times on the HDD. This produces a large reduction in HDD seek time for a small outlay of space on the SSD. In a scenario in which only 10% of launch blocks can be migrated to the SSD, the SSLSF strategy achieves average launch times for Eclipse and LibreOffice, which are 5.8% less than those exhibited by the widely used strategy of migrating short sequences of blocks first.

When applications require high I/O performance, solid-state drives (SSDs) are often preferable because they perform better than traditional hard-disk drives (HDDs). Therefore, database system response time can be improved by moving frequently used data to SSDs. However, because capacity is both more limited and more expensive for SSDs than it is for HDDs, there is a need to determine which data are most appropriate to migrate from HDDs to SSDs. In this paper, we propose a priority-based data placement method for databases using SSDs by considering an integrated mechanism and a migration rule for performing migrations between HDDs and SSDs. The proposed method can provide database systems with high I/O performance by properly moving high-priority data to SSDs with fast access capabilities while maintaining the low-priority data on HDDs, which have lower costs. The results of experiments show that the proposed method can achieve the goal while requiring only small amounts of SSD capacity.

Nowadays solid state drives (SSDs) are gaining popularity and are replacing magnetic hard disk drives (HDDs) in enterprise storage systems. As a result, extracting the maximum performance from SSDs is becoming crucial to deal with the increasing storage volume and performance needs. Active disks were introduced as a way to offload data-processing tasks from the host into disks freeing system resources and achieving better performance. In this work, we present an active SSD architecture called Self-Sorting SSD that targets to offload sorting operations which are commonly used in data-intensive and database environments and that require heavy data transfer. Processing sorting operations directly on the SSD reduces data transfer from/to the storage devices, increasing system performance and the lifetime of SSDs. Experiments on a real SSD platform reveal that our proposed architecture outperforms traditional external merge sort by up to 60.75%, reduces energy consumption by up to 58.86%, and eliminates all the data transfer overhead to compute sorted results.

This paper explores the topic of Solid-State Drives (SSDs) and NAND flash memory. Information of this paper is mainly obtained from authoritative academic websites and papers related to SSDs and flash memory. Memory cells are fundamental components in various electronic devices. In the field of data storage, SSDs represent the latest generation of storage devices, offering significantly better performance and functionality than traditional hard disk drives (HDDs). NAND flash memory chips are crucial component of SSDs, particularly 3D NAND, which exhibits exceptional performance and holds significant potential for future advancements. This paper will commence by providing an overview of SSDs and HDDs, followed by a comparison between NAND flash and NOR flash, and ultimately analysing the future of NAND flash memory technology employed in SSDs, with a focus on elucidating the advantages of 2D NAND over 3D NAND. Additionally, this paper explains a few challenges that NAND technology faces currently, as well as some possible solutions.

As the flash-based solid-state drives(SSDs) gradually replace the mechanical hard disk drives(HDDs) as the mainstream storage, unlike the HDDs, SSDs have rich internal parallelism, which makes it have the excellent characteristics that HDDs do not have. External mergesort, as the classical algorithm of external sorting adopted in many systems and algorithms, has an important impact on the overall performance. Therefore, it is of great significance to optimize and improve the efficiency of external mergesort algorithm. The research work on optimizing raw external mergesort algorithm on SSDs is relatively few. Thus, aiming at the external mergesort problem, based on the characteristics of SSDs, this paper proposes the SortDecision algorithm which can calculate its optimal execution scheme, including merging way, read buffer size, and write buffer size which determine the execution process of external mergesort. Exploiting the above optimal execution scheme, external mergesort can obtain better efficiency. In the SortDecision algorithm, external mergesort problem on SSDs is formalized and transformed into a piecewise convex optimization problem. Then, the optimal external mergesort scheme is obtained by enumerating the solutions of each subconvex problem. The experimental results show that the external mergesort proceeds guided by SortDecision algorithm can achieve a speedup of 1 $\sim $ 6.7 compared to the traditional external mergesort algorithm in the case of limited memory provided. The richer the internal parallelism resources inside SSDs, the better the effect of SortDecision’s acceleration.

Flash memory based solid state drives (SSDs) are widely adopted in mobile devices, PCs and data centers, making their reliability critical. Although periodically creating checkpoints is a well-developed technique for traditional hard disk drives, very few work has exploited the unique properties of SSDs to accelerate checkpoint creation and reduce storage cost. More specifically, the remap-on-write property of SSD creates a trail of multiple versions of data, which can be exploited to create multiple checkpoints without engendering extra writes. However, efficiently managing the metadata to support multiple checkpoints is challenging. In this paper, we propose a low storage cost and high performance scheme to support multiple checkpoints in SSDs. Instead of storing a log-based snapshot of the entire Flash Translation Layer (FTL) per checkpoint, we efficiently keep track of the changes to the FTL across multiple checkpoints, thus accelerating the creation, deletion, and activation of checkpoints within minimum storage overhead and minimum impact on regular SSD operations. Experiments on Microsoft real-world benchmarks confirm the advantage of the proposed scheme over a fully snapshot scheme in terms of storage and performance overhead.

Evolution of virtualization in data center is fast and is being widely used in the world. Usage of virtual machine (VM) in data center (DC) cannot be aside from problems such as: Operating System (OS) problem, virtual network, memory and CPU utilizations. Besides of those problems, utilization of VM can be found in cloud computing technology to make more efficient and its performance should be good entirely. Problem in VM is very complex. It can be found in OS, application and physical server. To keep it in good performance, operational engineer should operate VM monitoring system in order to keep VM run well. This research will use several methods, such as: fuzzy Mamdani, holdout validation and naive Bayes. These methods will then create decision making for VM performance condition.