- Research Article
66
- 10.2514/1.62308
Collision Probability with Gaussian Mixture Orbit Uncertainty
- Feb 12, 2014
- Journal of Guidance, Control, and Dynamics
- Kyle J Demars + 2 more +2
Collision Probability with Gaussian Mixture Orbit Uncertainty
References 1Nicolaides, J. D., “On the Free FlightMotion of Missiles Having Slight Con gurational Asymmetries,” U.S. Army Ballistics Research Lab., Rept. R858, Aberdeen Proving Ground,MD, June 1953. 2Nicolaides, J. D., “Two Nonlinear Problems in the Flight Mechanics of Modern Ballistic Missiles,” Inst. of Aeronautical Sciences, Rept. 59-11, Univ. of Toronto, ON, Canada, Jan. 1959. 3Murphy, C. H., “Responses of an Asymmetric Missile to Spin Varying Through Resonance,” AIAA Journal, Vol. 9, No. 11, 1971, pp. 2197–2201. 4Nayfeh, A. H., and Saric, W. S., “An Analysis of Asymmetric Rolling Bodies with Nonlinear Aerodynamics,” AIAA Journal, Vol. 10, No. 8, 1972, pp. 1004–1011. 5Murphy, C. H., “Some Special Cases of Spin-Yaw Lock In,” Journal of Guidance, Control, and Dynamics, Vol. 12, No. 6, 1989, pp. 771–776. 6Ananthkrishnan, N., and Raisinghani, S. C., “Steady and Quasisteady Resonant Lock-In of Finned Projectiles,” Journal of Spacecraft and Rockets, Vol. 29, No. 5, 1992, pp. 692–696. 7Ashley, H., Engineering Analysis of Flight Vehicles, Addison–Wesley, Reading, MA, 1974, pp. 173–202. 8Gollub, J. P., and Swinney, H. L., “Onset of Turbulence in a Rotating Fluid,” Physical Review Letters, Vol. 35, Dec. 1975, pp. 927–930.
Collision Probability with Gaussian Mixture Orbit Uncertainty
Collision Probability with Gaussian Mixture Orbit Uncertainty
Approximation of Optimal Impulsive Flyby Transfer with Terminal Inspection Constraints
Approximation of Optimal Impulsive Flyby Transfer with Terminal Inspection Constraints
Large deformation, deep penetration theory for a compressible strain-hardening target material
1 lorillo, A. J., Damping Dynamics of Axisymmetric Rotor Stabilized Satellites, ASME Winter Meeting, Chicago, 111., Nov. 1959. 2 Likins, P. W., Criteria for Dual Spin Journal of Spacecraft and Rockets, Vol. 4, No. 12, Dec. 1967, pp. 1638-1643. 3 Mingori, D. L., Effects of Energy Dissipation on the Attitude of Dual-Spin Satellites, AIAA Journal, Vol. 7, No. 1, Jan. 1969, pp. 20-27. 4 Pringle, R., Jr., Stability of the Force-Free Motions of a Dual-Spin AIAA Journal, Vol. 7, No. 6, June 1969, pp. 1054-1063. 5 Velman, J. R., Simulation Results for a Dual-Spin Proceedings of the Symposium on Attitude Stabilization and Control of Dual-Spin Spacecraft, Aug. 1-2, 1967, Rept. SAMSOTR-68-191, Nov. 1967, U. S. Air Force. 6 Johnson, C. R., Tacasat I Nutation Dynamics, to be published in AIAA Progress in Astronautics and Aeronautics: Communications Satellite Technology for the 70' s, Vol. 25, edited by N. E. Feldman and C. M. Kelly, MIT Press, Cambridge, 1971.
Read moreAblative Material Tests under Transient Heating Simulating Ballistic Re-Entry
6 Page, W. A., Compton, D. L., Borucki, W. J., Ciffone, D. L., and Cooper, D. M., Transport in Inviscid Nonadiabatic Stagnation-Region Shock Layers, AIAA Progress in Astronautics and Aeronautics: Thermal Design Principles of Spacecraft and Entry Bodies, Vol. 21, edited by J. T. Bevans, Academic Press, New York, 1969, pp. 75-114. 6 Chin, J. H. and Hearne, L. E., Shock-Layer Radiation for Sphere-Cones With Radiative Decay/' AIAA Journal, Vol. 2, No. 7, July 1964, pp. 1345-1347. 7 Coleman, W. D. et al., of Environmental and Ablator Performance Uncertainties on Heat-Shielding Requirements for Hyperbolic Entry Vehicles, Journal of Spacecraft and Rockets, Vol. 5, No. 11, Nov. 1968, pp. 1260-1270. 8 Wilson, K. H., Point Analysis of Coupled Viscous-Radiating Flow With Blowing, CR-1548, June 1970, NASA. 9 Wilson, K. H., Massive Blowing Effects on Viscous, Radiating Stagnation Point Flow, AIAA Paper 70-203, New York, 1970. 10 Vulliet, W. G., Sand, S. J., and Findley, W. B., Sputter Treatment of Ablation in the Atmosphere of Jupiter, Final Report, JPL Contract 952480, Gulf General Atomics, June 30, 1969. 11 Adams, M. C., Advances in Ablation, ARS Journal, Vol. 29, No. 9, Sept. 1959, pp. 625-632. 12 Canning, T. N., Tauber, M. E., and Wilkins, M. E., Review of Recent Ballistic Range Boundary-Layer Transition Work on Ablating Bodies at Ames, Proceedings—Boundary Layer Transition Study Group, Aerospace Corp., San Bernardino, Calif., July 11 and 12,1967. 13 Moyer, C. B. and Rindal, R. A., An Analysis of the Coupled Chemically Reacting Boundary Layer and Charring Ablator, Rept. 66-7, March 1967, Aerotherni Corp. JANAF Thermochemical Tables, Dow Chemical Co., Aug. 1965. 16 Duff, R. E. and Bauer, S. H., The Equilibrium Composition of the C/H System at Elevated Temperatures, LA-2556, Sept. 1961, Los Alamos Scientific Lab. 16 Alien, H. J. and Eggers, A. J., A Study of the Motion and Aerodynamic Heating of Missiles Entering the Earth's Atmosphere at Supersonic Speeds, TN 4047,1957, NACA.
Read moreAxial compression corner flow with shock impingement
References ^ohen, R. B., Penn, J. P., Janson, S. W., Lichtin, D. A., Zondervan, K. P., Sharp, L. R., Thaller, L. H., and DeVincenzi, D. L., Preliminary Concepts for a Solar Orbit Raising Experiment,''AIAA Paper 89-2373, July 1989. Rosen, S., and Sloan, J., Electric Orbital Transfer Vehicle—A Military Perspective, AIAA Paper 89-2496, July 1989. Jaffe, L. D., Nuclear-Electric Reusable Orbital Transfer Vehicle, Journal of Spacecraft and Rockets, Vol. 25, No. 5, 1988, pp. 375-381. 4 Jones, R. M., Comparison of Potential Systems for Orbit Transfer, Journal of Spacecraft and Rockets, Vol. 21, No. 1, 1984, pp. 88-95. Faulders, C. R., Optimum Thrust Programming of Electrically Powered Rocket Vehicles in a Gravitational Field, American Rocket Society Journal, Vol. 30, No. 10, 1960, pp. 954-960. Faulders, C. R., Optimum Thrust Programming of Electrically Powered Rocket Vehicles for Earth Escape, AIAA Journal, Vol. 1, No. 1, 1963, pp. 233-234. Burton, R. L., and Wassgren, C., Payload Rate Optimization for Low-Thrust, Near-Earth Trajectories, AIAA Paper 90-2620, July 1990. Edelbaum, T. N., Propulsion Requirements for Controllable Satellites, America n Rocket Society Journal, Vol. 31, Aug. 1961, pp. 1079-1089. Free, B. A., Near Earth Transfers with SP 100, AIAA Paper 87-0987, May 1987. Gorski, R. J., A Space Based Orbital Transfer Vehicle Operating from the Space Station, AIAA Paper 86-2325, Sept. 1986. Palaszewski, B., Geosynchronous Earth Orbit Base Propulsion: Options, AIAA Paper 87-0990, May 1987.
Read moreFULLY NONLINEAR MODELING AND ANALYSIS OF PRECISION MEMBRANES
International Journal of Computational Engineering ScienceVol. 04, No. 01, pp. 19-65 (2003) No AccessFULLY NONLINEAR MODELING AND ANALYSIS OF PRECISION MEMBRANESP. FRANK PAI and LEYLAND G. YOUNGP. FRANK PAIDepartment of Mechanical and Aerospace Engineering, University of Missouri-Columbia, Columbia, MO 65211, USA Search for more papers by this author and LEYLAND G. YOUNGDepartment of Mechanical and Aerospace Engineering, University of Missouri-Columbia, Columbia, MO 65211, USA Search for more papers by this author https://doi.org/10.1142/S1465876303000788Cited by:4 PreviousNext AboutSectionsPDF/EPUB ToolsAdd to favoritesDownload CitationsTrack CitationsRecommend to Library ShareShare onFacebookTwitterLinked InRedditEmail AbstractHigh precision membranes are used in many current space applications. This paper presents a fully nonlinear membrane theory with forward and inverse analyses of high precision membrane structures. The fully nonlinear membrane theory is derived from Jaumann strains and stresses, exact coordinate transformations, the concept of local relative displacements, and orthogonal virtual rotations. In this theory, energy and Newtonian formulations are fully correlated, and every structural term can be interpreted in terms of vectors. Fully nonlinear ordinary differential equations (ODEs) governing the large static deformations of known axisymmetric membranes under known axisymmetric loading (i.e., forward problems) are presented as first-order ODEs, and a method for obtaining numerically exact solutions using the multiple shooting procedure is shown. A method for obtaining the undeformed geometry of any axisymmetric membrane with a known inflated geometry and a known internal pressure (i.e., inverse problems) is also derived. Numerical results from forward analysis are verified using results in the literature, and results from inverse analysis are verified using known exact solutions and solutions from the forward analysis. Results show that the membrane theory and the proposed numerical methods for solving nonlinear forward and inverse membrane problems are accurate.Keywords:Nonlinear membrane theorynumerically exact analysis References M. Salama , M. Lou and H. Fang , Proceedings of the AIAA Structures, Structural Dynamics and Materials Conference ( 2000 ) . Google Scholar M. S. Smith , R. S. Schallenkamp and L. G. Seely , AIAA International Balloon Technology Conference . Google Scholar D. Gorinevsky , T. Hyde and C. Cabuz , Proceedings of the AIAA Structures, Structural Dynamics and Materials Conference ( 2001 ) . Google Scholar V. Firt , Statics, Formfinding and Dynamics of Air-Supported Membrane Structures ( Martinus Nijhoff Publishers , Boston , 1983 ) . Google Scholar A. L. Palisoc, Inflatable Reflector Development Program, Task 3 Report, L'Garde Technical Report, LTR-94-AP-008, 1994 . Google Scholar S. V. Damle et al. , AIAA International Balloon Technology Conference . Google ScholarP. F. Pai, A. N. Palazotto and J. M. Greer Jr., Comput. Struct. 66, 823 (1998), DOI: 10.1016/S0045-7949(98)00004-2. Crossref, Google Scholar H. Furuya and Y. Kawasaki , Proceedings of the AIAA Structures, Structural Dynamics and Materials Conference . Google Scholar G. Greschik , M. M. Mikulas and A. Palisoc , Proceedings of the AIAA Structures, Structural Dynamics and Materials Conference ( 1998 ) . Google ScholarJ. Ruze, Proceedings of the IEEE 54, 633 (1966), DOI: 10.1109/PROC.1966.4784. Crossref, Google Scholar A. Palisoc et al. , Fifth SPIE Conference on Space Telescopes and Instruments . Google ScholarP. F. Pai and A. H. Nayfeh, Nonlinear Dynamics 6, 459 (1994). Crossref, Google ScholarP. F. Pai and A. N. Palazotto, J. Eng. Mech. 121, 568 (1995), DOI: 10.1061/(ASCE)0733-9399(1995)121:4(568). Crossref, Google ScholarP. F. Pai and A. H. Nayfeh, Nonlinear Dynamics 2, 445 (1991), DOI: 10.1007/BF00045438. Crossref, Google Scholar K. Washizu , Variational Methods in Elasticity & Plasticity , 3rd edn. ( Pergamon Press Inc , New York , 1982 ) . Google ScholarP. F. Pai and A. N. Palazotto, Int. J. Solids Struct. 32, 3047 (1995), DOI: 10.1016/0020-7683(94)00273-Y. Crossref, Google Scholar H. Golden , T. W. Strganac and R. A. Schapery , AIAA International Balloon Technology Conference ( 1997 ) . Google Scholar J. Stoer and R. Bulirsch , Introduction to Numerical Analysis ( Springer-Verlag , New York , 1980 ) . Crossref, Google Scholar FiguresReferencesRelatedDetailsCited By 4Analytical Investigation of Dynamics of Inflatable Parabolic Membrane ReflectorFushou Liu and Dongping Jin1 Jan 2015 | Journal of Spacecraft and Rockets, Vol. 52, No. 1A point collocation method for geometrically nonlinear membranesKyle F. Kolsti and Donald L. Kunz1 Jan 2013 | International Journal of Solids and Structures, Vol. 50, No. 2Numerical and experimental dynamic characteristics of thin-film membranesLeyland G. Young, Suresh Ramanathan, Jiazhu Hu and P. Frank Pai1 May 2005 | International Journal of Solids and Structures, Vol. 42, No. 9-10Modeling, Analysis and Testing of some Deployable/Inflatable StructuresPerngjin Pai and Leyland Young26 June 2012 Recommended Vol. 04, No. 01 Metrics History Received 26 August 2002 Accepted 4 November 2002 KeywordsNonlinear membrane theorynumerically exact analysisPDF download
Read moreIn Memoriam: Dr. Clive L. Dym (1942–2016)
In Memoriam: Dr. Clive L. Dym (1942–2016)
Finite element analysis of elastoplastic contact problems with friction
Fang, T. and Wang, Z. N., A Generalization of Caughey's Normal Mode Approach to Nonlinear Random Vibration Problems, to be published in AIAA Journal. Caughey, T. K., Equivalent Linearization Techniques, Journal of the Acoustical Society of America, Vol. 35, No. 11, 1963, pp. 1706-1711. that is taken to establish the non-interpenetration conditions between components D and W. The variables X$ X^^ represent the Cartesian coordinates of the material points in contact components D and W. The functional EM can be expressed as
Read moreEffect of the prosthetic mitral valve on vortex dynamics and turbulence of the left ventricular flow
Mechanical heart valves implanted in mitral position have a great effect on the ventricular flow. Changes include alteration of the dynamics of the vortical structures generated during the diastole and the onset of turbulence, possibly affecting the efficiency of the heart pump or causing blood cell damage. Modifications to the hemodynamics in the left ventricle, when the inflow through the mitral orifice is altered, were investigated in vitro using a silicone rubber, flexible ventricle model. Velocity fields were measured in space and time by means of an image analysis technique: feature tracking. Three series of experiments were performed: one with a top hat inflow velocity profile (schematically resembling physiological conditions), and two with mechanical prosthetic valves of different design, mounted in mitral position—one monoleaflet and the other bileaflet. In each series of runs, two different cardiac outputs have been examined by changing the stroke volume. The flow was investigated in terms of phase averaged velocity field and second order moments of turbulent fluctuations. Results show that the modifications in the transmitral flow change deeply the interaction between the coherent structures generated during the first phase of the diastole and the incoming jet during the second diastolic phase. Top hat inflow gives the coherent structures which are optimal, among the compared cases, for the systolic function. The flow generated by the bileaflet valve preserves most of the beneficial features of the top hat inflow, whereas the monoleaflet valve generates a strong jet which discourages the permanence of large coherent structures at the end of the diastole. Moreover, the average shear rate magnitudes induced by the smoother flow pattern of the case of top hat inflow are nearly halved in comparison with the values measured with the mechanical valves. Finally, analysis of the turbulence statistics shows that the monoleaflet valves yield higher turbulence intensity in comparison with the bileaflet and, with top hat inflow, there is not a complete transition to turbulence.
Read moreA Survey of Automatic Control Techniques for Large Space Structures
A Survey of Automatic Control Techniques for Large Space Structures
Static Aeroelastic Analysis of Flexible Aircraft with Large Deformations
A method for static aeroelastic trim analysis of a flexible aircraft with large deformations has been presented in this paper, which considers the geometric nonlinearity of the structure and the nonplanar effects of aerodynamics. A nonplanar vortex lattice method is used to compute the nonplanar aerodynamics. The nonlinear finite element method is introduced to consider the structural geometric nonlinearity. Moreover, the surface spline method is used for structure/aerodynamics coupling. Finally, by combining the equilibrium equations of rigid motions of the deformed aircraft, the nonlinear trim problem of the flexible aircraft is solved by iterative solution method. For instance, the longitudinal trim analysis of a flexible aircraft with large-aspect-ratio wings is carried out by both the nonlinear method presented and the linear method of MSC Flightloads. Results obtained by these two methods are compared, and it is indicated that the results agree with each other when the deformation is small. However, because the linear method of static aeroelastic analysis does not consider the nonplanar aerodynamic effects or structural geometric nonlinearity, it is not applicable as the deformations increase. Whereas the nonlinear method presented could solve the trim problem accurately, even the deformations are large, which makes the nonlinear method suitable for rapid and efficient analysis in engineering practice..
Read moreNondestructive construction error detection in large space structures
Continuum modeling of large space structures is extended to the problem of detecting construction errors in large space structures such as the proposed space station. First-order dynamic sensitivity equations for structures involving eigenfrequencies, modal masses, modal stiffnesses, and modal damping are presented. Matrix equations relating changes in element parameters to dynamic sensitivities are summarized. The sensitivity equations for the entire dynamical system are rearranged as a system of algebraic equations with unknowns of stiffness losses at selected locations. The feasibility of the formulation is numerically demonstrated on a simply-supported Euler-Bernouilli beam with simulated construction defects. The method is next extended to large space structures modelled as equivalent continua with simulated construction defects.
Read moreCorrosion damage assessment and monitoring of large steel space structures
Large steel space structures, when exposed to a harsh corrosive environment, are inevitably subjected to atmospheric corrosion and stress corrosion cracking. This paper proposes a framework for assessing the corrosion damage of large steel space structures subjected to both stress corrosion cracking and atmospheric corrosion. The empirical model for estimating atmospheric corrosion based on measured information is briefly introduced. The proposed framework is applied to a real large steel space structure built in the southern coastal area in China to assess its corrosion damage and investigate the effects of atmospheric corrosion on stress corrosion cracking. Based on the results, the conceptual design of the corrosion monitoring system of large steel space structures is finally conducted as the first step for a real corrosion monitoring system.
Read moreThe origin of Holocene shell deposits in the chenier plain facies of Essex (Great Britain)
The origin of Holocene shell deposits in the chenier plain facies of Essex (Great Britain)
Experimental validation of a fuel-efficient robotic maneuver control algorithm for very large flexible space structures
The robotic maneuvering of large space structures is key to a number of future orbital missions. In this paper a large space structure maneuver control algorithm, recently proposed, is extended and experimentally validated. The method uses space robots’ manipulators to control the vibration of the structures being maneuvered and their reaction jets perform the large motion maneuvers. The algorithm quickly damps out the vibrations and requires less fuel than reaction jet-based vibration control methods. The approach is called maneuver decoupled control. Its performance is demonstrated and quantitatively evaluated in simulation and experiments.
Read more