Deep learning assisted continuous wavelet transform-based spectrogram for the detection of chlorophyll content in potato leaves

Emotions expressed by humans can be identified from facial expressions, speech signals, or physiological signals. Among them, the use of physiological signals for emotion classification is a notable emerging area of research. In emotion recognition, a person’s electrocardiogram (ECG) and galvanic skin response (GSR) signals cannot be manipulated, unlike facial and voice signals. Moreover, wearables such as smartwatches and wristbands enable the detection of emotions in people’s naturalistic environment. During the COVID-19 pandemic, it was necessary to detect people’s emotions in order to ensure that appropriate actions were taken according to the prevailing situation and achieve societal balance. Experimentally, the duration of the emotion stimulus period and the social and non-social contexts of participants influence the emotion classification process. Hence, classification of emotions when participants are exposed to the elicitation process for a longer duration and taking into consideration the social context needs to be explored. This work explores the classification of emotions using five pretrained convolutional neural network (CNN) models: MobileNet, NASNetMobile, DenseNet 201, InceptionResnetV2, and EfficientNetB7. The continuous wavelet transform (CWT) coefficients were detected from ECG and GSR recordings from the AMIGOS database with suitable filtering. Scalograms of the sum of frequency coefficients versus time were obtained and converted into images. Emotions were classified using the pre-trained CNN models. The valence and arousal emotion classification accuracy obtained using ECG and GSR data were, respectively, 91.27% and 91.45% using the InceptionResnetV2 CNN classifier and 99.19% and 98.39% using the MobileNet CNN classifier. Other studies have not explored the use of scalograms to represent ECG and GSR CWT features for emotion classification using deep learning models. Additionally, this study provides a novel classification of emotions built on individual and group settings using ECG data. When the participants watched long-duration emotion elicitation videos individually and in groups, the accuracy was around 99.8%. MobileNet had the highest accuracy and shortest execution time. These subject-independent classification methods enable emotion classification independent of varying human behavior.

Distinguishing pericarpium citri reticulatae of different origins using terahertz time-domain spectroscopy combined with convolutional neural networks

Understanding the learning mechanism of convolutional neural networks in spectral analysis

The aeroengine control system is a piece of complex thermal machinery which works under high-speed, high-load, and high-temperature environmental conditions over lengthy periods of time; it must be designed for the utmost reliability and safety to function effectively. The consequences of sensor faults are often extremely serious. The inherent complexity of the engine structure creates difficulty in establishing accurate mathematical models for the model-based sensor fault diagnosis. This paper proposes an intelligent fault diagnosis method for aeroengine sensors combining a deep learning algorithm with time-frequency analysis wherein the signal recognition problem is transformed into an image recognition problem. The continuous wavelet transform (CWT) is first applied to seven common health condition signals in an engine control system sensor in order to generate scalograms that capture the characteristics of the signal. A convolutional neural network (CNN) model trained with preprocessed and labeled datasets is then used to extract the features of a time-frequency graph based on which faults can be identified and isolated. This method does not require modeling and design thresholds, so it has strong robustness and accuracy rate of over 97%. The trained model effectively reveals faults in sensor signals and allows for accurate identification of fault types.

Cardiovascular Diseases (CVD) requires precise and efficient diagnostic tools. The manual analysis of Electrocardiograms (ECGs) is labor-intensive, necessitating the development of automated methods to enhance diagnostic accuracy and efficiency. This research aimed to develop an automated ECG classification using Continuous Wavelet Transform (CWT) and Deep Convolutional Neural Network (DCNN), and transform 1D ECG signals into 2D spectrograms using CWT and train a DCNN to accurately detect abnormalities associated with CVD. The DCNN is trained on datasets from PhysioNet and the MIT-BIH and the MIT-BIH arrhythmia dataset. The integrated CWT and DCNN enable simultaneous classification of multiple ECG abnormalities alongside normal signals. This analytical observational research employed CWT to generate spectrograms from 1D ECG signals, as input to a DCNN trained on diverse datasets. The model is evaluated using performance metrics, such as precision, specificity, recall, overall accuracy, and F1-score. The proposed algorithm demonstrates remarkable performance metrics with a precision of 100% for normal signals, an average specificity of 100%, an average recall of 97.65%, an average overall accuracy of 98.67%, and an average F1-score of 98.81%. This model achieves an approximate average overall accuracy of 98.67%, highlighting its effectiveness in detecting CVD. The integration of CWT and DCNN in ECG classification improves accuracy and classification capabilities, addressing the challenges with manual analysis. This algorithm can reduce misdiagnoses in primary care and enhance efficiency in larger medical institutions. By contributing to automated diagnostic tools for cardiovascular disorders, it can significantly improve healthcare practices in the field of CVD detection.

Laser-induced breakdown spectroscopy (LIBS) has been applied to many fields for the quantitative analysis of diverse materials. Improving the prediction accuracy of LIBS regression models is still of great significance for the Mars exploration in the near future. In this study, we explored the quantitative analysis of LIBS for the one-dimensional ChemCam (an instrument containing a LIBS spectrometer and a Remote Micro-Imager) spectral data whose spectra are produced by the ChemCam team using LIBS under the Mars-like atmospheric conditions. We constructed a convolutional neural network (CNN) regression model with unified parameters for all oxides, which is efficient and concise. CNN that has the excellent capability of feature extraction can effectively overcome the chemical matrix effects that impede the prediction accuracy of regression models. Firstly, we explored the effects of four activation functions on the performance of the CNN model. The results show that the CNN model with the hyperbolic tangent (tanh) function outperforms the CNN models with the other activation functions (the rectified linear unit function, the linear function and the Sigmoid function). Secondly, we compared the performance among the CNN models using different optimization methods. The CNN model with the stochastic gradient descent optimization and the initial learning rate = 0.0005 achieves satisfactory performance compared to the other CNN models. Finally, we compared the performance of the CNN model, the model based on support vector regression (SVR) and the model based on partial least square regression (PLSR). The results exhibit the CNN model is superior to the SVR model and the PLSR model for all oxides. Based on the above analysis, we conclude the CNN regression model can effectively improve the prediction accuracy of LIBS.

Among the many deep learning methods, the convolutional neural network (CNN) model has an excellent performance in image recognition. Research on identifying and classifying image datasets using CNN is ongoing. Animal species recognition and classification with CNN is expected to be helpful for various applications. However, sophisticated feature recognition is essential to classify quasi-species with similar features, such as the quasi-species of parrots that have a high color similarity. The purpose of this study is to develop a vision-based mobile application to classify endangered parrot species using an advanced CNN model based on transfer learning (some parrots have quite similar colors and shapes). We acquired the images in two ways: collecting them directly from the Seoul Grand Park Zoo and crawling them using the Google search. Subsequently, we have built advanced CNN models with transfer learning and trained them using the data. Next, we converted one of the fully trained models into a file for execution on mobile devices and created the Android package files. The accuracy was measured for each of the eight CNN models. The overall accuracy for the camera of the mobile device was 94.125%. For certain species, the accuracy of recognition was 100%, with the required time of only 455 ms. Our approach helps to recognize the species in real time using the camera of the mobile device. Applications will be helpful for the prevention of smuggling of endangered species in the customs clearance area.

Accurately identifying epileptogenic zone (EZ) using high-frequency oscillations (HFOs) is a challenge that must be mastered to transfer HFOs into clinical use. We analyzed the ability of a convolutional neural network (CNN) model to distinguish EZ and non-EZ HFOs. Nineteen medically intractable epilepsy patients with good surgical outcomes 2 years after surgery were studied. Five-minute interictal intracranial electroencephalogram epochs of slow-wave sleep were selected randomly. Then 5 s segments of ripples (80–200 Hz) and fast ripples (FRs, 200–500 Hz) were detected automatically. The EZs and non-EZs were identified using the surgery resection range. We innovatively converted all epochs into four types of images using two scales: original waveforms, filtered waveforms, wavelet spectrum images, and smoothed pseudo Wigner–Ville distribution (SPWVD) spectrum images. Two scales were fixed and fitted scales. We then used a CNN model to classify the HFOs into EZ and non-EZ categories. As a result, 7,000 epochs of ripples and 2,000 epochs of FRs were randomly selected from the EZ and non-EZ data for analysis. Our CNN model can distinguish EZ and non-EZ HFOs successfully. Except for original ripple waveforms, the results from CNN models that are trained using fixed-scale images are significantly better than those from models trained using fitted-scale images (p < 0.05). Of the four fixed-scale transformations, the CNN based on the adjusted SPWVD (ASPWVD) produced the best accuracies (80.89 ± 1.43% and 77.85 ± 1.61% for ripples and FRs, respectively, p < 0.05). The CNN using ASPWVD transformation images is an effective deep learning method that can be used to classify EZ and non-EZ HFOs.

This study leveraged Convolutional Neural Network (CNN) models to estimate canopy height in Southeast Australian forests before and after the 2019–2020 bushfire event, using inputs from Sentinel-1, Sentinel-2, spectral indices, and terrain features and GEDI canopy height (rh99) as target variables. Our research consisted of three primary objectives: (1) an evaluation of GEDI rh99 canopy height in relation to an nDSM derived from airborne LiDAR, (2) the development of two CNN models for pre- and post-fire scenarios, and (3) utilizing the trained CNN models to generate pre- and post-fire canopy height maps and canopy height change maps across the continuous landscape. GEDI rh99 accuracy analysis revealed R 2 = 0.85, RMSE = 7.25 m and nRMSE = 0.23 for pre-fire GEDI and R 2 = 0.78, RMSE = 10.1 m and nRMSE = 0.3 for post-fire GEDI. The pre-fire CNN model achieved R 2 = 0.75, RMSE = 7.29 m and nRMSE = 0.22, and post-fire CNN model achieved R 2 = 0.62, RMSE = 11.67 m, and nRMSE = 0.34 when validated against nDSM. Bias analysis was conducted, revealing that GEDI rh99 underestimated nDSM across all canopy height ranges, and slope has no significant impact on GEDI accuracy. Notably, post-fire GEDI rh99 exhibited significant underestimation in high to extreme fire severity. The CNN models’ prediction displayed overestimation in short forests < 20 m and increasing underestimation in taller forests > 20 m and underestimation in high and extreme fire severity. Subsequent investigation indicated that canopy layer thinning in high fire severity conditions resulted in weak GEDI waveform signals and consequent bias. Additionally, the GEDI rh99 bias was propagated to the CNN models, together with insensitivity of spectral band values to canopy height in dense and burnt forests potentially contributed to models’ bias. Finally, we demonstrated CNN models’ ability to monitor forest recovery by generating canopy height maps spanning East Gippsland from 2019 to 2023.

BACKGROUND AND AIM: Outdoor ultrafine particles (UFP; 100 nm) and black carbon (BC) vary greatly within cities and may have adverse impacts on human health such as cardiovascular mortality and brain tumour incidence. Traditional regression methods for estimating spatial distributions of ambient air pollution depend on extensive, curated geospatial information system databases. This has resulted in a disparity wherein little is known about local air pollution in the data-sparse settings of low- and middle- income countries. We used a hybrid approach to develop new models to estimate within-city spatial variations in outdoor UFP and BC concentrations across Bucaramanga, Colombia. METHODS: We conducted a large-scale mobile monitoring campaign over twenty days in 2019. Land use regression (LUR) models were developed using land use parameters from curated and open-source databases. Convolutional Neural Network (CNN) models were developed using Google Maps satellite view and street view images. Combined models were developed by combining predictions from the LUR and CNN models. After training in the training and validation sets, predictions were generated in the test set and compared to measured values. RESULTS:The combined UFP model (R2=0.54) outperformed the CNN (R2=0.47) and land use regression (LUR) models (R2=0.47) on their own. Similarly, the combined BC model also outperformed the CNN and LUR BC models (R2 = 0.51 vs 0.43 and 0.45 respectively). Spatial variations in model performance were more stable for the CNN and combined models compared to the LUR models suggesting that the combined approach may be less likely to contribute to differential exposure measurement error in epidemiological studies. CONCLUSIONS:Estimates from these models can then be applied to population-based cohorts in order to evaluate population health risks. Additionally, our findings demonstrated that satellite and street-level images can be combined with a traditional LUR modelling approach to improve predictions of within-city spatial variations in outdoor UFP and BC concentrations. KEYWORDS: Ultrafine particles, Black Carbon, Deep learning, Images, Land use regression

The advent of intelligent fault diagnosis has advanced condition monitoring in industrial machinery. This study develops and evaluates two lightweight convolutional neural networks (CNNs): a 1-D CNN for time-domain vibration signals and a 2-D CNN for continuous wavelet transform (CWT)–based scalogram images in rolling-element bearing fault diagnosis. A key feature of this work is its dual-modality framework that independently examines temporal and time–frequency representations to assess diagnostic accuracy and computational efficiency. Using the Case Western Reserve University (CWRU) dataset and an in-house experimental dataset, both models demonstrate strong generalization under variable conditions. The 1-D CNN achieves 99.67% mean accuracy with significantly lower computation time and memory usage than AlexNet and GoogLeNet, while the 2-D CNN attains 98.74% accuracy with improved interpretability. Performance remains stable across 10 independent runs, with 95% confidence intervals confirming the robustness of both models for future edge-oriented fault diagnosis applications.

Excessive withdrawal of groundwater for agricultural irrigation can cause seawater intrusion into coastal aquifers. Such a case will in turn results in deterioration of irrigation water quality. Determination of irrigation water quality with traditional methods is a time-consuming and costly process. However, machine learning algorithms can be useful tools for modeling and estimating groundwater quality used for irrigation water purposes. In this study, TDS, PS, SAR, and Cl parameters of groundwater were estimated with models based on EC and pH variables. For this purpose, prediction performances of two different deep learning methods (convolutional neural network (CNN) and deep neural network (DNN)) and two different classical machine learning (Random Forest (RF) and extreme gradient boosting (XGBoost)) methods were compared. In addition, predictive uncertainty of the models was determined by quantile regression (QR) analysis. Performance criteria and results of uncertainty analysis revealed that CNN (in testing phase, NSE = 0.95 for TDS, NSE = 0.96 for PS, NSE = 0.67 for SAR and NSE = 0.93 for CI) and DNN (in testing phase, NSE = 0.91 for TDS, NSE = 0.91 for PS, NSE = 0.57 for SAR and NSE = 0.94 for Cl) models had quite a close performance in estimation of TDS, PS, SAR, and Cl parameters and higher than the other two classical machine learning methods. As a result, the CNN model can be considered the best performing model in estimating all quality parameters due to the highest NSE and lowest RMSE values. In addition, the Taylor diagram showed that the values estimated using the CNN model had the highest correlation with the measured data. It was determined that the model with the lowest uncertainty based on the PICP statistics was DNN, followed by the CNN model. However, the CNN model has predicted outliers more accurately. Present findings proved that deep learning models could offer efficient tools for predicting irrigation water quality parameters.

The main goal of this research was to accurately diagnose diseases in pepper plants using convolutional neural network (CNN) models and visual parameters features. Thus, we aimed to build a computing system that can utilise visual cues to identify plant diseases with almost 100% reliability. A total of 2,200 images were trained and tested on a dataset, which was divided into healthy leaves and those with bacterial ailments. The images were preprocessed, resized to 300x300 pixels, and then segmented to extract the relevant traits from them. This CNN model, in a word, is accurate because it detects diseases with 99.65% accuracy. If we want to speak of a high accuracy rate, that's the CNN model. It learns to identify the intricate patterns and features in pepper plants that are associated with diseases. CNN can make revolutionary changes to the identification of plant diseases and help prevent crop damage through timely treatments. Automatic identification of the disease makes life easier for both agriculturists and scientists. The results underscore the importance of image preprocessing, segmentation, and feature extraction in improving the ability of CNN models to locate diseases. Additionally, the performance of the CNN model was compared with other machine learning models such as KNN, Decision Tree, ANN, and Random Forest. It was found that the developed CNN model can predict the response with greater accuracy than the others. Modern high-tech precision farming systems might utilise proposed CNN models for plant disease diagnosis.

Automatic prediction of citrus fruit diseases requires the selection of a suitable classification model among various Convolutional Neural Network (CNN) models. The CNN models are the most effective for image classification. However, more than one CNN model occasionally performs closer to each other. Choosing the best classification model requires considerable effort in this situation. In this study, 17 CNN models were used for citrus fruit disease identification. Citrus fruit diseases include anthracnose, blackspot, canker, scab, and healthy. In this research, the performance of CNN models was analysed, and a two-phase statistical analysis was carried out to determine which CNN model provided the most accurate predictions of citrus crop disease. The 17 CNN models used were AlexNet, Darknet, Densenet, efficientnet, nasnetlarge, googlenet, inceptionresnetv2, inceptionv3, mobilenetv2, nasnetmobile, Xception, squeezenet, resnet18, resnet50, resnet101, vgg16, and vgg19. The two-phase statistical analysis was Duncan's multiple range test, followed by the Wilcoxon signed-rank test is the second one. Again, in order to do a statistical analysis, nine different indicators, including “accuracy, sensitivity, specificity, precision, FPR, F1 Score, MCC, Kappa, and computing time”, were taken into consideration. After the execution of 17 CNN models and twophase statistical analysis, it was revealed that resnet101 is superior among CNN models for citrus fruit disease prediction.

To better understand and improve the prediction of the seasonal surface temperature (TS) across the United States, we employed convolutional neural network (CNN) models trained on the Community Earth System Model Version 2 Large Ensemble (CESM2 LENS). We used lagged sea surface temperatures (SST) over the tropical Pacific region, containing the information of the El Niño Southern Oscillation (ENSO), as input for the CNN models. ENSO is the principal driver of variability in seasonal US surface temperatures (TSUS) and employing CNN models allows for spatiotemporal aspects of ENSO to be analyzed to make seasonal TSUS predictions. For predicting TSUS, the CNN models exhibited significantly improved skill over standard statistical multilinear regression (MLR) models and dynamical forecasts across most regions in the US, for lead times ranging from 1 to 6 months. Furthermore, we employed the CNN models to predict seasonal TSUS during extreme ENSO events. For these events, the CNN models outperformed the MLR models in predicting the effects on seasonal TSUS, suggesting that the CNN models are able to capture the ENSO‐TSUS teleconnection more effectively. Results from a heatmap analysis demonstrate that the CNN models utilize spatial features of ENSO rather than solely the magnitude of the ENSO events, indicating that the improved skill of seasonal TSUS is due to analyzing spatial variation in ENSO events. The proposed CNN model demonstrates a promising improvement in prediction skill compared to existing methods, suggesting a potential path forward for enhancing TSUS forecast skill from subseasonal to seasonal timescales.