Deep Learning-Based Indoor Localization Using Multi-View BLE Signal

With the increasing demand for location-based services, indoor localization technology based on wireless sensor networks (WSNs) has recently received significant attention. Bluetooth low energy (BLE) has become a research hotspot among the numerous WSNs due to its ubiquitous deployment, low-power consumption, and low cost. Many previous BLE-based indoor localization technologies can only use received signal strength indication (RSSI) for localization in the 2-D plane and achieve coarse accuracy. However, high-accuracy location information is required in an increasing number of applications, e.g., elderly fall detection for medical applications, which urgently requires a new BLE-based localization technology in 3-D space. To this end, we propose Spotlight, an angle-based fine-grained indoor localization system in 3-D space using BLE sensors. The critical idea of the Spotlight is to measure the angle-of-arrival (AoA) and elevation-of-angle (EoA) of the signal from the target to the BLE receivers and utilize them to achieve accurate 3-D localization. Specifically, we develop an offset elimination algorithm and data stitching algorithm, utilizing the second-order cone (SoC) programming to obtain accurate angle estimates. Then, the simulated annealing algorithm (SAA) is used to search for the target location in 3-D space. Finally, we develop the prototype system with commercial off-the-shelf (COTS) BLE sensors and conduct extensive experiment measurements in real-world scenarios. The results demonstrate that the proposed system can achieve a median localization error of 36 cm in the 2-D plane and 48 cm in the 3-D space.

Introduction:An important and complicated problem related to the multilateration of Wi-Fi or Bluetooth Low Energy signals as well as Wi-Fi fingerprinting is the procedure of infrastructure adjustment which includes Wi-Fi radio map construction and Wi-Fi or Bluetooth Low Energy radio signal path loss model calibration.Purpose:Developing a method for navigation and Wi-Fi radio map construction, which would provide user’s indoor navigation, Bluetooth Low Energy path loss model calibration and Wi-Fi radio map collaborative semi-automatic construction.Results:The paper presents a collaborative semi-automatic Wi-Fi radio map construction method based on the combination of Bluetooth Low Energy multilateration, Wi-Fi fingerprinting, Wi-Fi radio map collaborative semiautomatic construction procedure and semi-automatic Bluetooth Low Energy path loss model calibration. For the semi-automatic calibration procedure of the Bluetooth Low Energy signal propagation model and for the method of collaborative semi-automatic construction of Wi-Fi radio map and indoor navigation, a calibration algorithm and an algorithm of collaborative semi-automatic construction of Wi-Fi radio map and indoor navigation were proposed, respectively. A mobile application has been developed which implements the proposed algorithms in order to test them and analyze the results.Practical relevance:The proposed method allows you to avoid time-consuming procedures of constructing a map of Wi-Fi radio signals and semi-automatic calibration of Bluetooth Low Energy signal propagation in the offline phase.

Since GPS (Global Positioning System) cannot meet accuracy requirements indoors, indoor Location-Based Services (LBSs) have become increasingly important. BLE (Bluetooth Low Energy) offers cost and accuracy advantages. Typically, the position fingerprinting method is used for indoor positioning. However, due to irregular reflection and absorption, the indoor environment introduces various offsets in Bluetooth RSSI (Received Signal Strength Indicator). This study analyzed the RSSI space and proposed a pre-processing workflow to improve position estimation accuracy by correcting offsets in RSSI space for BLE fingerprinting methods using machine learning. Experiments performed using different position estimation methods showed that the corrected data achieved a 6% improvement over the filter-only result. This study also evaluated the effects of different pre-processing and post-processing filters on positioning accuracy. Experiments were also conducted using a published dataset and showed similar results.

Bluetooth Low Energy (BLE) based Wireless Indoor Localization System (WILS) with high localization accuracy and high localization precision is a key requirement in enabling the Internet of Things (IoT) in today’s applications. In this paper, we investigated the effect of BLE signal variations on indoor localization caused by the change in BLE transmission power levels. This issue is not often discussed as most of the works on localization algorithms use the highest power levels but has important practical implications for energy efficiency, e.g., if a designer would like to trade-off localization performance and node lifetime. To analyze the impact, we used the established trilateration based localization model with two methods i.e., Centroid Approximation (CA) and Minimum Mean Square Error (MMSE). We observed that trilateration based localization with MMSE method outperforms the CA method. We further investigated the use of two filters i.e., Low Pass Filter (LPF) and Kalman Filter (KF) and evaluated their effects in terms of mitigating the random variations from BLE signal. In comparison to non-filter based approach, we observed a great improvement in localization accuracy and localization precision with a filter-based approach. Furthermore, in comparison to LPF based trilateration localization with CA, the performance of a KF based trilateration localization with MMSE is far better. An average of 1 m improvement in localization accuracy and approximately 50% improvement in localization precision is observed by using KF in trilateration based localization model with the MMSE method. In conclusion, with KF in trilateration based localization model with MMSE method effectively eliminates random variations in BLE RSS with multiple transmission power levels and thus results in a BLE based WILS with high accuracy and high precision.

Fingerprinting approach based on a radio map is one of the well-received methods for indoor localization. However, owing to the radio devices reconfigured or deteriorated, the radio map will be degraded, rendering the positioning outcomes unreliable. We introduce an unsupervised anomaly detection model, termed Radio Map Anomaly Detection for Fingerprint Indoor Positioning with GAN (RAD-GAN), which trains only the normal RSSI (Received Signal Strength Indication) samples to learn the normality distribution of the radio signal in the spatial indoor domain. We exploit an encoder-decoder-encoder neural network for latent feature extraction. Afterward, an adversarial training scheme is employed to minimize the reconstruction error both within RSSI space and latent feature space. The higher reconstruction deviation of the RSSI vector is indicative of an anomaly from a normal distribution. We evaluate RAD-GAN in a BLE (Bluetooth Low Energy) signal environment with the power gain actively modified and the public UJI long-term Wi-Fi fingerprinting dataset. Experimental results show that RAD-GAN is more sensitive and robust than the former state-of-the-art models.

In this paper, we propose an indoor positioning system based on Bluetooth low energy (BLE), and the localization tag is with characteristics of low power, low cost, and high portability. The proposed system consists of BLE tags, BLE/WiFi repeaters, and a fusion server. The BLE tag is a device which broadcasts BLE beacons. The BLE/WiFi repeaters collect the beacons transmitted from the tag and extract the received signal strength (RSS). The RSS values are then transmitted to the fusion server through WiFi, and the server will estimate the position of the BLE tag with RSS-based positioning algorithm. We propose an indoor positioning algorithm which is a hybrid from received signal strength indication (RSSI)-fingerprint and cell of origin (CoO) to estimate the BLE tag's location. Some modifications are made to typical RSSI-fingerprint and CoO algorithm to get better accuracy. The test results show 1.2 m to 1.4 m positioning accuracy. The size of the BLE tag is 1.7 cm in radius and 0.5 cm thick. Each BLE tag costs 3 US dollars. The current consumption of the tag is 50 μA which can be used without charge for 136 days with a CR2025 battery.

Distance estimation and proximity classification techniques are essential for numerous IoT applications and in providing efficient services in smart cities. Bluetooth Low Energy (BLE) is designed for IoT devices, and its received signal strength indicator (RSSI) has been used in distance and proximity estimation, though they are noisy and unreliable. In this study, we leverage the BLE TX power level in BLE models.We adopt a comparative analysis framework that utilizes our extensive data library of measurements. It considers commonly used state-of-the-art model, in addition to our data-driven proposed approach. The RSSI and TX power are integrated into several parametric models such as log shadowing and Android Beacon library models, and machine learning models such as linear regression, decision trees, random forests and neural networks. Specific mobile apps are developed for the study experiment. We have collected more than 1.8 millions of BLE records between encounters with various distances that range from 0.5 to 22 meters in an indoor environment. Interestingly, considering TX power when estimating the distance reduced the mean errors by up to 46% in parametric models and by up to 35% in machine learning models. Also, the proximity classification accuracy increased by up to 103% and 70% in parametric and machine learning models, respectively. This work is one of the first studies (if not the first) that analyze in depth the TX power variations in improving the distance estimation and classification.

Tracking a moving user in indoor environments using Bluetooth low energy beacons.

Received Signal Strength Indicator (RSSI) is used in indoor positioning for measuring object distance to the base station. However, acquiring accurate RSSI values is challenging because wireless interference factors, such as multipath decline interference, make RSSI values of the same object fluctuate over time. Therefore, instead of a single RSSI, RSSI acquisition will collect a set of RSSI values from which the most moderate RSSI is derived. For this purpose, we propose an Enhanced Gaussian Mixture Model (EGMM) to derive a more precise RSSI for improving indoor positioning accuracy. EGMM enhances Gaussian Mixture Model (GMM) by applying Akaike information criterion (AIC) to determine the best K value for GMM to divide RSSI values into K sets representing signals from different paths. Then, EGMM identifies the most appropriate set of RSSI values to derive a more precise RSSI and thus improves the accuracy of indoor positioning. Our EGMM solution performs well in an open indoor space. The experiment is conducted with iBeacon devices, and the average error distance of EGMM is about 64% of those generated by existing Gaussian filtering. The average positioning error of EGMM is about 0.48 meter, which is adequate to indoor positioning accuracy.

A survey of active and passive indoor localisation systems

iBeacon is a new alternative power-based indoor positioning system developed based on Bluetooth low energy (BLE) technology. iBeacon has the advantages of being low-powered and low-cost compared with the other indoor positioning systems. iBeacon is specialised in the detection of proximity and it has been deployed in public areas for information broadcasting purposes. In this paper, iBeacon will be studied for (1) the accuracy of BLE signal and (2) the feasibility of proximity function. Experiments on an iBeacon Unit are carried out to generalise the calibration procedure. It was found that the origin of error comes from a relationship between received signal strength indicator (RSSI) fluctuation and distance, implying that the increasing error with distance is due to signal fluctuation. The determination of effective range can form the basis for iBeacon's proximity function for practical usages. The aim of this paper is to form a basis for a paradigm shift of location-based services (LBS) from Navigation to Proximity when low-energy short-distance technology is involved.

Industry 4.0, often known as the fourth industrial revolution, is the fourth version of the industrial revolution. Through the emergent and disruptive intelligence and information technologies, Industry 4.0 is increasingly being advocated as the way to improve productivity, foster economic growth, and ensure the sustainability of industrial enterprises. The workforce in the Industry 4.0 needs easy indoor navigation. This is inevitable in the case of a large industry. Contribution to this we have developed a smartphone-based system to help the workforce not get lost or waste time by providing them with a total overview of the factory on a digital map. The developed system provides workforce-friendly indoor navigation. In this work, we have developed an android application with a digital map interface for indoor navigation based on Bluetooth low energy (BLE) nodes. The system uses the trilateration technique for position estimation using the received signal strength indicator (RSSI) from BLE nodes. The shortest path from source to destination is calculated using Dijkstra's algorithm. The developed system can be used for the workforce in Industry 4.0 such as logistics, smart buildings, smart healthcare, and even smart urban governance by the various parties involved. The system was developed for the employees in the Muthoot Institute of Science and Technology.

An indoor localization system in wireless sensor networks has become a hot development area. Received signal strength indicator (RSSI)-based localization is a promising technique since it requires a relatively low configuration, battery power and easy control. However, the received signal strength is influenced by channel interference and propagation environments. This characteristic affects channel stability and location accuracy in RSSI-based localization. As a result, we propose a novel indoor localization system consisting of a preprocessing method and a post-processing method. To improve channel stability, the pre-processing method selects an optimal channel in terms of the smallest distance error. The optimal channel is less affected to IEEE 802.11. To develop location accuracy, the post-processing method performs maximum likelihood estimation-based location tracking scheme considering the reliability of the RSSI value measurement. We apply three methods to the existing MLE to improve the reliability of the RSSI value. By using this indoor localization system with preprocessing and post-processing, the location error can be reduced. We also proved the performance of the indoor localization system by conducting experiments in a real indoor environment.

This paper describes how the location of a test object or person can be determined at room resolution using Bluetooth Low Energy (BLE). Therefore, the test object or person is equipped with a BLE node and approximately central in each room a low-cost and low-power BLE sensor is placed. No stringent installation requirements or battery replacement is needed for these sensors. They send advertising packets to the mobile node, where the received data is processed quickly, based on the signal strength of the received messages, characterized by the Received Signal Strength Indicator (RSSI). No fingerprinting, propagation characteristics or trilateral statistics are needed to determine in which room the test object or person is located by use of the measured RSSI values. In this paper, the localization is done by a BLE development kit of Bluegiga. Measuring in a real-life environment, we can locate at room resolution a device during more than 90% of the time, without the need for a difficult installation procedure or battery replacements on a regular basis.

The ability to precisely locate and navigate a partially impaired or a blind person within a building is increasingly important for a wide variety of public safety and localization services. In this paper, we explore indoor localization algorithms using Bluetooth Low Energy (BLE) beacons. We propose using the BLE beacon’s received signal strength indication (RSSI) and the geometric distance from the current beacon to the fingerprint point in the framework of fuzzy logic for calculating the Euclidean distance for the subsequent determination of location. According to our results, the fingerprinting algorithm with fuzzy logic type-2 (hesitant fuzzy sets) is fit for use as an indoor localization method with BLE beacons. The average error of localization is only 0.43 m, and the algorithm obtains a navigation precision of 98.2 ± 1%. This precision confirms that the algorithms provide great aid to a visually impaired person in unknown spaces, especially those designed without physical tactile guides, as confirmed by low Fréchet and Hausdorff distance values and high navigation efficiency index (NEI) scores.