DEEP LEARNING FRAMEWORK FOR WOVEN COMPOSITE ANALYSIS

The application of the Generative Adversarial Networks (GANs) model has increased rapidly in the past few years. This paper will demonstrate the training results of different GANs models in different epochs. Since GANs is a structure, they can be applied to different neural network layers such as Convolutional Neural Network (CNN) and multilayer perceptron (MLP). Different neural network layers are constructed and trained separately to compare their performance and efficiency in this experiment. To achieve this goal, all models perform the same task, generating handwritten numbers. In the experiment, three GANs models are tested. Two of them are based on MLP. They use the same structure and the same number of units. The only difference is the activation function. One uses the sigmoid function, and the other uses the LeakyRelu function. The last model is based on CNN. Specifically, the GANs model using Convolutional layers is called DCGAN. All models are constructed using TensorFlow, each of them was trained for 10, 20, 40, 80, 120, and 160 epochs. The generated images and loss value are recorded in all cases of the previously mentioned epochs of training. The experimental results demonstrated that Compared with the GANs model based on MLP, DCGAN has higher training efficiency and better image quality. Different activation functions can also affect the efficiency of the GANs model.

Brain tumors are formed due to the abnormal growth of the cells that get multiplied and become in uncontrollable perspective. Tumors can damage brain cells by pressing down the skull, which consociate begins in, which negatively affects human health. In advanced stages, a brain tumor is a more dangerous infection that cannot be relieved. Brain tumor detection and early prevention are necessary in today's world. An extreme learning machine (ELM) is a widely adopted algorithm in machine learning. It is proposed to use classification models in brain tumor imaging. This classification is based on the techniques implemented: Convolutional Neural Networks(CNN) and Generative Adversarial Networks(GAN). CNN efficiently solves the convex optimization problem and is faster, requiring less human effort. The algorithmic architecture of GAN uses two neural networks, pocking one against the other. These networks are implemented in various fields to classify brain Tumor images. The present study mainly aims to introduce a new proposed classification system of preschool children brain imaging with Hybrid Convolutional Neural Networks and with the techniques of GAN. The proposed technique is compared with the existing hybrid-CNN and hybrid-GAN techniques. The outcomes are encouraging because the loss is deduced, and the accuracy facet increases. The proposed system achieved a training accuracy of 97.8% and a validation accuracy of 89%. The outcomes of the studies show that ELM in the platform of GAN for preschool children brain imaging classification has achieved higher predictive performance than the traditional classification mechanisms in increasingly complex scenarios. Time elapsed for training brain images samples finds inference value for training samples and time elapsed value increased by 28.9855%. Approximation ratio for cost based on probability, finding Approximation ratio for low probability range is increased by 88.1%. The combination of CNN, GAN and hybrid-CNN, hybrid-GAN, and hybrid CNN + GAN, compared with the proposed hybrid system, increased Detection latency for low range learning rate by 3.31%.

Background/Objectives: Accurate preoperative characterization of ovarian masses is essential for appropriate clinical management, particularly for borderline ovarian tumors (BOTs), which are less common and often difficult to distinguish from benign or malignant lesions on ultrasound. Although expert subjective ultrasound assessment achieves high diagnostic accuracy, limited availability of highly trained sonologists restricts its widespread application. Artificial intelligence-based approaches offer a potential solution; however, the low prevalence of BOTs restricts the development of robust deep learning models due to severe class imbalance. This study aimed to develop a Convolutional Neural Network (CNN)-based classifier enhanced with Generative Adversarial Networks (GANs) to improve the discrimination of ovarian masses as benign, malignant, or BOT using ultrasound images. Methods: A total of 3816 ultrasound images from 636 ovarian masses were retrospectively analyzed, including 390 benign lesions, 202 malignant tumors, and 44 BOTs. To address class imbalance, a Deep Convolutional GAN (DCGAN) was used to generate 2000 synthetic BOT images for data augmentation. A three-class ensemble CNN model integrating VGG16, ResNet50, and InceptionNetV3 architectures was developed. Performance was assessed on an independent test set and compared with a baseline model trained without DCGAN augmentation. Results: The incorporation of DCGAN-generated BOT images significantly enhanced classification performance. The BOT F1-score increased from 68.4% to 86.5%, while overall accuracy improved from 84.7% to 91.5%. For BOT identification, the final model achieved a sensitivity of 88.2% and specificity of 85.1%. Class-specific AUCs were 0.96 for benign lesions, 0.94 for malignant tumors, and 0.91 for BOTs. Conclusions: DCGAN-based augmentation effectively expands limited ultrasound datasets and improves CNN performance, particularly for BOT detection. This approach demonstrates potential as a decision support tool for preoperative assessment of ovarian masses.

Successful training of convolutional neural networks (CNNs) requires a substantial amount of data. With small datasets, networks generalize poorly. Data Augmentation techniques improve the generalizability of neural networks by using existing training data more effectively. Standard data augmentation methods, however, produce limited plausible alternative data. Generative Adversarial Networks (GANs) have been utilized to generate new data and improve the performance of CNNs. Nevertheless, data augmentation techniques for training GANs are underexplored compared to CNNs. In this work, we propose a new GAN architecture for augmentation of chest X-rays for semi-supervised detection of pneumonia and COVID-19 using generative models. We show that the proposed GAN can be used to effectively augment data and improve classification accuracy of disease in chest X-rays for pneumonia and COVID-19. We compare our augmentation GAN model with Deep Convolutional GAN and traditional augmentation methods (rotate, zoom, etc.) on two different X-ray datasets and show our GAN-based augmentation method surpasses other augmentation methods for training a GAN in detecting anomalies in X-ray images.

In recent years, advances in image restoration have prominently featured Convolutional Neural Networks (CNNs) and Generative Adversarial Networks (GANs).Specifically, in seismic image denoising, the DnCNN model, rooted in CNN, employs residual learning combined with batch normalization for a streamlined approach to denoising.Alternatively, SRGAN, leveraging GAN and super-resolution techniques, trains its generative model using a perceptual loss function, accentuating perceptual disparities between generated and authentic images to boost visual quality.Recognizing the importance of preserving salient seismic data, the Constrained-DnCNN model has been introduced, refining seismic data interpretation.Additionally, the CR-SRGAN model, targeting super-resolution of artifacts and color restoration, deviates from conventional training datasets acquired via high-resolution image interpolation and downsampling.Upon comparative analysis, the DCGAN, amalgamating features of CNN and GAN, stands out for harnessing CNN's robust feature extraction.This bolsters the model's capacity to adeptly fit real data distributions.DCGAN's potential spans aspects like multimodal fusion, model interpretability, trustworthiness, and image restoration quality, marking it a promising research avenue.

Thanks to the availability of large-scale data, deep Convolutional Neural Networks (CNNs) have witnessed success in various applications of computer vision. However, the performance of CNNs on Synthetic Aperture Radar (SAR) image classification is unsatisfactory due to the lack of well-labeled SAR data, as well as the differences in imaging mechanisms between SAR images and optical images. Therefore, this paper addresses the problem of SAR image classification by employing the Generative Adversarial Network (GAN) to produce more labeled SAR data. We propose special GANs for generating SAR images to be used in the training process. First, we incorporate the quadratic operation into the GAN, extending the convolution to make the discriminator better represent the SAR data; second, the statistical characteristics of SAR images are integrated into the GAN to make its value function more reasonable; finally, two types of parallel connected GANs are designed, one of which we call PWGAN, combining the Deep Convolutional GAN (DCGAN) and Wasserstein GAN with Gradient Penalty (WGAN-GP) together in the structure, and the other, which we call CNN-PGAN, applying a pre-trained CNN as a discriminator to the parallel GAN. Both PWGAN and CNN-PGAN consist of a number of discriminators and generators according to the number of target categories. Experimental results on the TerraSAR-X single polarization dataset demonstrate the effectiveness of the proposed method.

Text sentiment analysis is one of the most important tasks in the field of public opinion monitoring, service evaluation and satisfaction analysis under network environments. Compared with the traditional Natural Language Processing analysis tools, convolution neural networks can automatically learn useful features from sentences and improve the performance of the affective analysis model. However, the original convolution neural network model ignores sentence structure information which is very important for text sentiment analysis. In this paper, we add piece-wise pooling to the convolution neural network, which allows the model to obtain the sentence structure. And the main features of different sentences are extracted to analyze the emotional tendencies of the text. At the same time, the user’s feedback involves many different fields, and there is less labeled data. In order to alleviate the sparsity of the data, this paper also uses the generative adversarial network to make common feature extractions, so that the model can obtain the common features associated with emotions in different fields, and improves the model’s Generalization ability with less training data. Experiments on different datasets demonstrate the effectiveness of this method.

Due to the real working conditions, the collected mechanical fault datasets are actually limited and always highly imbalanced, which restricts the diagnosis accuracy and stability. To solve these problems, we present an imbalanced fault diagnosis method based on the generative model of conditional-deep convolutional generative adversarial network (C-DCGAN) and provide a study in detail. Deep convolutional generative adversarial network (DCGAN), based on traditional generative adversarial networks (GAN), introduces convolutional neural network into the training for unsupervised learning to improve the effect of generative networks. Conditional generative adversarial network (CGAN) is a conditional model obtained through introducing conditional extension into GAN. C-DCGAN is a combination of DCGAN and CGAN. In C-DCGAN, based on the feature extraction ability of convolutional networks, through the structural optimization, conditional auxiliary generative samples are used as augmented data and applied in machine fault diagnosis. Two datasets (Bearing dataset and Planetary gear box dataset) are carried out to validate. The simulation experiments showed that the improved performance is mainly due to the generated signals from C-DCGAN to balance the dataset. The proposed method can deal with imbalanced fault classification problem much more effectively. This model could improve the accuracy of fault diagnosis and the generalization ability of the classifier in the case of small samples and display better fault diagnosis performance.

Generative Adversarial Network is the topic of interest in today’s research in the field of image processing and computer vision. A basic GAN model was introduced by Ian Goodfellow et al. in 2014. After that advancement in the field of research in GAN models has been application specific. In computer vision and image to image translation GANs are playing very effective role either in the case of face detection and recognition or in image resolution enhancement and image augmentation. This paper represents a concise overview of various GAN models along with their features and applications. Pix2Pix and conditional GAN models work upon paired datasets while other models like cycle GAN, discover GAN, dual GAN, info GAN, deep convolutional GAN etc. work upon unpaired datasets. Various image datasets which are commonly used for training of generator and discriminator networks are also discussed in this paper. Since partial mode collapse is a common problem to occur during training process for all models, therefore various normalization techniques are also preferred during the training of generator and discriminator networks. As the advancements in GAN models are increasing at a very fast rate, soon these models will also be preferred in commercial applications.

Generative models have been applied in many fields and can be evaluated with many methods. In the evaluation of generative models, the proper evaluation metric varies with the application field. Therefore, the evaluation of generative adversarial networks is inherently challenging. In this study, conditional deep convolutional generative adversarial networks were applied in mechanical fault diagnosis and then evaluated. We proposed three evaluation metrics of conditional deep convolutional generative adversarial networks: Jensen-Shannon divergence, kernel maximum mean discrepancy, and the 1-nearest neighbor classifier which were used to distinguish generated samples from real samples, test mode collapsing and detect overfitting based on the dataset of Electronic Engineering Laboratory of Case Western Reserve University and the planetary gearbox dataset measured in the laboratory. The Jensen-Shannon divergence could not well distinguish generated samples from real samples. However, the two metrics (maximum mean discrepancy and 1-nearest neighbor classifier) well-distinguished generated samples from real samples, thus verifying the applicability of conditional deep convolutional generative adversarial networks in the field of mechanical diagnosis.

Objective. Event-related potential (ERP) sensitivity to faces is predominantly characterized by an N170 peak that has greater amplitude and shorter latency when elicited by human faces than images of other objects. We aimed to develop a computational model of visual ERP generation to study this phenomenon which consisted of a three-dimensional convolutional neural network (CNN) connected to a recurrent neural network (RNN). Approach. The CNN provided image representation learning, complimenting sequence learning of the RNN for modeling visually-evoked potentials. We used open-access data from ERP Compendium of Open Resources and Experiments (40 subjects) to develop the model, generated synthetic images for simulating experiments with a generative adversarial network, then collected additional data (16 subjects) to validate predictions of these simulations. For modeling, visual stimuli presented during ERP experiments were represented as sequences of images (time x pixels). These were provided as inputs to the model. By filtering and pooling over spatial dimensions, the CNN transformed these inputs into sequences of vectors that were passed to the RNN. The ERP waveforms evoked by visual stimuli were provided to the RNN as labels for supervised learning. The whole model was trained end-to-end using data from the open-access dataset to reproduce ERP waveforms evoked by visual events. Main results. Cross-validation model outputs strongly correlated with open-access (r = 0.98) and validation study data (r = 0.78). Open-access and validation study data correlated similarly (r = 0.81). Some aspects of model behavior were consistent with neural recordings while others were not, suggesting promising albeit limited capacity for modeling the neurophysiology of face-sensitive ERP generation. Significance. The approach developed in this work is potentially of significant value for visual neuroscience research, where it may be adapted for multiple contexts to study computational relationships between visual stimuli and evoked neural activity.

Sugar maple tar spot is caused by the water mold Rhytisma acerinum and is one of the unique systemic leaf pathogens affecting sugar maple (Acer saccharum) in North America and Europe. The exact tar spot of the sugar maple class fraction is paramount to developing effective control practices. As our task, we suggest a new Convolutional Neural Networks (CNN)- Generative Adversarial Networks (GAN)-based framework for increasing the accuracy of severity classification through a convolutional neural network-generative adversarial network architecture. The CNN-GAN infrastructure blends machine intelligence methods to make the process of automation and increase disease classification accuracy. We carried out the multistep process of collecting a comprehensive dataset of sugar maple leaf images representing different levels of degree of tar spot and finally trained the CNN-GAN network using a systematic methodology. Experiments conducted indicate successful implementation of the algorithm based on the CNN-GAN model as the network system has yielded the accuracies of classification of sugar maple tar spot severity being 95.62%. The tabular results with details and analysis as well as an indication of the model's performance among patients with different severity levels of this psychiatric disorder. This aspect expands the field of automated disease detection and management in agriculture and forestry which can be used in earlier screening and suitable interventions. The proposed method of a CNN-GAN framework entails great promise as it enhances the precision in diagnoses and instead provides more efficient disease-fighting strategies such as sugar maple tar sport and other plant diseases.

Crop yield estimation and prediction constitutes a key issue in agricultural management, particularly under the context of demographic pressure and climate change. Currently, the main challenge in estimating crop yields based on remotely sensed data and data-driven methods is how to cope with small datasets and the limited amount of annotated samples. In order to cope with small datasets and the limited amount of annotated samples and improve the accuracy of winter wheat yield estimation in the Guanzhong Plain, PR China, this study proposed a method of combining generative adversarial networks (GANs) and convolutional neural network (CNN) for comprehensive growth monitoring of winter wheat, in which the remotely sensed leaf area index (LAI), vegetation temperature condition index (VTCI) and meteorological data at four growth stages of winter wheat during 2012–2017 were generated as the inputs of multi-layer convolutional neural networks (CNNs), and GAN was employed to artificially increase the number of training samples. Then, a linear regression model between the simulated comprehensive growth monitoring (I) and the measured yields was established to estimate yields of winter wheat in the Guanzhong Plain pixel by pixel. The final results showed when GAN was used to double the size of the training samples, and the simulation values obtained by CNN based on augmented samples using GAN provided a better training (R2 = 0.95, RMSE = 0.05), validation (R2 = 0.54, RMSE = 0.16) and testing (R2 = 0.50, RMSE = 0.14) performance than that just using the original samples. The achieved best pixel-scale yield estimation accuracy of winter wheat (R2 = 0.50, RMSE = 591.46 kg/ha) in the Guanzhong Plain. These results showed that small samples can be enlarged by GAN, thus, more important features for reflecting the growth conditions and yields of winter wheat from the remotely sensed indices and meteorological indices can be extracted, and indicated that CNN accompanied with GAN could contribute a lot to the comprehensive growth monitoring and yield estimation of winter wheat and data augmentation methods are extremely useful for the application of small samples in deep learning.

Image style transformation techniques are an important research area in the field of computer vision, aiming to combine the content of one image with the artistic style of another image to create new images with the content of the input image and the style of the artistic style image. The development of this field has benefited from the rapid development of deep learning algorithms, especially the application of techniques such as Convolutional Neural Networks (CNN) and Generative Adversarial Networks (GAN). At the heart of image style transformation is how to capture both the content and artistic style of the input image. This is typically achieved by using different levels of activation of the convolutional neural network as content and style representations. The content representation captures the object and structural information in the image, while the style representation captures the texture and colour information of the image. To capture the style of an image, a Gram matrix is typically used to measure the correlation between features at a particular level. This matrix representation allows us to capture texture information and colour distribution, thus enabling style migration. The goal of the image style transformation model is to minimise both content loss and style loss to produce synthetic images. Content loss typically uses Euclidean distance to measure the difference between content representations, while style loss involves the distance between Gram matrices. GANs have become an important tool in image style transformation. The generator network is responsible for generating synthetic images and the discriminator network evaluates the realism of the generated images. Through adversarial training, the generator and discriminator networks constantly compete to improve the quality of the generated images. Finally, this study highlights the potential applications of image style conversion techniques in the fields of art creation, image editing and virtual reality, and proposes directions for future research on deep learning algorithms and underlying principles to further improve the efficiency and quality of image style conversion techniques. The continuous development of this field will bring new opportunities for image processing and creative applications.

The Accurate and the early detection of the neurodegenerative brain disorders such as the Alzheimer’s disease(AD) is crucial today for an effective patient care and prevention of disease progression. Computer Assisted Diagnosis (CAD) based on the neuroimaging data is an active research that was enhanced recent years by the deep learning methods. Brain modalities hold the key to achieve a comprehensive understanding of the brain changes and disorders. Magnetic Resonance Imaging(MRI) is a powerful brain modality and biomarker to capture the brain changes. It has been widely adopted for the AD diagnosis. Most of the recent studies are based on the Convolution Neural Network (CNN)using the MRI modality for the AD detection. However the CNN requires a huge amount of data. Furthermore, current CNN models cannot provide a good feature representation due to the lack of an adaptive channel weighting. The main drawback of the CNN network is its inability to learns the importance of the image features and the main correlations among them. Current methods that are based on the CNN does not ensure a valuable information extraction about which brain regions are related to the AD detection. To deal with these challenges, we proposed 2 contributions. Firstly, we used a Deep Convolution Generative Adversarial neural network(DCGAN) for data augmentation to enhance the training and to tackle the lack of data. We proposed also a new method for AD detection based on the integration of the Efficient Channel Attention(ECA-Net) into the Residual network. The ECA module improve the residual network by an attention mechanism to extract the most relevant features and ensure an adaptive weighting channel mechanism. Our method provide an efficient feature representation and extraction with low computational cost. The proposed method was validated using the ADNI (Alzheimer’s disease neuroimaging initiative) and the Open Access Series of Imaging Studies (OASIS). The experimental results outlines that our proposed method achieved the highest classification accuracy comparing with different methods by reaching an accuracy rate of 95%KeywordsAlzheimer’s diseaseData augmentationAttention mechanismDCGANECA-ResNet101