DEPTH-3 ADJACENCY CLUSTER BASED ROUTING PROTOCOL

Mobile Ad-hoc Network (MANET) has emerged as the self organized wire less interconnection for the various applications in random topology. As most of the multimedia applications require strict QoS guarantee during the communication between a single source and multiple destinations. How ever, achieving reliable multicast transmission in MANET is crucial due to the dynamic network topology caused by the node mobility. This gives rise to the need for an efficient multicast routing strategy. This paper proposes a novel scheme PBMRP-BR (position-based Multicast Routing Protocol for Ad-hoc Network Using Backpressure Restoration) for efficient transmission of multimedia applications in Ad-hoc Network, which provides priorities for routing based on Distance of path, Load at the node (ie, traffic) and queue length at the node(ie, bandwidth). It also keeps the path information including bandwidth resources of each node for routing decisions. The problem of the link failure in the channel during the call in progress thus lead in the degradation of the QoS (Quality of Service).To deal this we are using a Backpressure Technique The simulation results shows that the proposed algorithm is able to find a better solution, fast convergence speed and high reliability. The simulation results shows the proposed PBMRP-BR protocol achieve the above objectives and gives the batter results than previous schemes like DSR for the maintenance of overheads and the path reliability. Our proposed scheme will improve the bandwidth utilization by reducing the congestion in the Adhoc wireless network.

Routing protocol is the primary strategy to design any wireless network. In Mobile AdHoc Network many routing protocols are present for sending packets from source to destination. Routing protocols in Mobile AdHoc Networks (MANETs) are reactive routing protocols, proactive routing protocols, hybrid routing protocols. Performance analysis of different routing protocols is the major step before selecting the routing protocol. Routing protocols perform different under different traffic conditions in different environments. In this paper, the TCP and UDP based performance analysis is carried out in reactive routing protocols and proactive routing protocols with different packet size using NS2 simulator under different traffic conditions. The delay, throughput and packet delivery ratio are common measures parameters used for the comparison of performance of reactive protocols and proactive protocols.

An adhoc network is a collection of mobile nodes connected by a wireless link, where each node acts as a router. In order to facilitate the communication within the network, a routing protocol is needed. Due to bandwidth constraint and dynamic topology of the mobile adhoc Networks supporting Quality of Service (QoS) is challenging task. The aim of this work is to present QoS enabled routing protocol in adhoc networks and compare it with normal routing protocol. The Optimized Link State Routing (OLSR) protocol is an optimization of the classical link state protocol, which is used for implement the QoS. Such protocol is adopted for the reason that it reduces the size of control messages and minimizes the overhead from the flooding of control traffic. The performance of both routing and QoS routing protocols are evaluated using Network simulator Ns-2.QoS enabled routing protocol shows a significant improvement in protocol performance metrics applied in our measurements, such as packet delivery ratio, packet loss and delay.

Ad-hoc networking allows users to form temporary wireless networks without existing infrastructure. Each node acts both as host and router and must therefore be willing to forward packets for other nodes. This is done using a mobile ad-hoc network (MANET) routing protocol. Frequent topology changes make such routing challenging. Existing protocols include dynamic source routing (DSR), the cluster-based routing protocol (CBRP), and the ad hoc on-demand distance vector (AODV) protocol, among others. Using existing protocols, however, some nodes may be unduly loaded and end-to-end delay may be high. Further, existing protocols are hard to upgrade once they are in use. To address these problems, a new routing protocol, MARP, using mobile agents is presented. Mobile agents are software entities that can move between network nodes and execute programs they carry with them wherever they are running. Our agent-based algorithm implements a demand-based protocol that provides efficient routing at the application layer. A proof of concept implementation has been developed using Aglets and simulated to evaluate its performance. The details of the protocol and its performance are reported in this paper.

An ad hoc network is a collection of autonomous mobile nodes to forming an instant multihop radio infrastructure-less network in a dynamic topology. Each node in Ad hoc network, functions as host and router at the same time,where maintaining connectivity in a decentralized manner by distributing the network control among the nodes. A large number of routing protocols for mobile ad-hoc networks are presented since last decade. Topology frequently changing,transmission power and asymmetric links are the main challenge that type of protocols is facing. Therefore, both proactive and reactive routing protocols for mobile ad-hoc networks show incapability, and sometimes prove to be inefficient under these circumstances. We have previously developed and presented a new multipath hybrid routing protocol in name of Multipath Distance Vector Zone Routing Protocol and we refer to it as MDVZRP. The protocol is implemented in the well known network simulator (ns2). In MDVZRP we assume that all the routes in the routing table are active and usable at any time, unless the node received or discovered a broken link. Therefore, no need to update the routing tables periodically to reduce the periodic update messages and hence we reduce the control traffic in the entire network. The protocol guarantees loop freedom, disjoint paths,and alternative paths in case of break the active path by none frequently maintaining topological map of a zone centered on each node. In this paper, the MDVZRPpsilas performance is evaluated and compared with DSDV and AODV standard protocols delivering CBR traffic. Simulation results show that it gives better performance than DSDV in all situations, and better than AODV, when mobility is low.

In this paper we propose a new routing protocol for large scale Mobile Adhoc Networks, named HRAN. The protocol supports large networks, requires few resources from devices and lowers the control message overhead associated with discovering new routes. It works by simulating the paradigm of heat trails in a physical environment through the use of bloom filters. In our protocol each node emits a certain quantity of heat and as the node moves a heat trail is formed. After a node leaves a location the heat from surrounding nodes slowly dissipates. This heat information is then used to guide routing queries from the source to the destination.

In this paper, we investigate two new hybrid protocols obtained by combination of proactive and reactive behaviors of other two well-known multicast routing protocols, namely the ODMRP and the MAODY. Hybrid routing protocols are known to perfonn better then either pure reactive or proactive protocols in the sense that they 1Iy to strike a balance between improved delay perfonnance and lower ovemead activities. In this work we combine the zone routing proactive behavior of the ZRP protocol with the reactive behavior of the ODMRP and MAODV protocols. The new protocols are named ZMAODV and WDMRP. Using Glomosim simulation we evaluate the perfonnance of these protocols and compare them to their original counte1parts as well as to the Multicast Zone Routing Protocol (MZR). The results reveal that the ZODMRP perfonns the best while the MZR exhibits the worst perfonnance.

Owing to the absence of any static support structure, ad-hoc networks are prone to link failures. The 'shortest path seeking' routing protocols may not lead to stable routes. The consequent route failures that ensue, lead to the degradation of system throughput. This paper suggests a routing protocol wherein the route selection is done on the basis of an intelligent residual lifetime assessment of the candidate routes. Schemes for performance enhancement with TCP and non-TCP traffic in ad-hoc networks are proposed. The protocol is backed by simulations in ns that show excellent adaptation to increasing network mobility. We have also introduced new route cache management and power aware data transmission schemes.

The Ad-Hoc networks are autonomous and infrastructure-less networks that provide flexibility to network nodes to connect and disconnect at any time. Routing protocol is a crucial part in the changeable topology network. DSDV, DSR and AODV are the most typical basic protocols for wireless Ad-Hoc networks. In this paper, it interprets and compares these three typical routing protocols using NS-2 simulator. It analyzes these three protocols in several aspects such as packet loss rate, route cost, average end-to-end delay and packet delivery fraction through simulations using Network Simulator in varying network conditions including the number of nodes, maximum moving speed of mobile node, maximum number of connections, node pause time, data rate and node moving range. Performance analysis of simulation results shows that each protocol has its own best suitable scene, so one can choose the optimal protocol under different scenarios according to the simulation results.

The field that is the key issue of wire, wireless environment is security and many routing protocols are studied also at the ad-hoc network. In the mobile ad-hoc network which has no fixed base structure, the weakest point is security. This paper analyzed AODV protocol, which is a routing protocol, the important routing protocol in ad-hoc network, so that it can overcome the problem in security threats. It used the lightest and fastest message authentication code, so was able to design rather safer AODV routing protocol.

In this paper, a new cross layer design of MAC and Routing protocol for OFDMA-based Multi-hop Ad-hoc Networks is proposed. In wireless network, when a route is established, the radio resource allocation problems at MAC layer may decrease the end to end performance proportionally with the length of each route. The contention at MAC layer may causes routing protocol to respond by finding new routes and routing table updates. The cross layer design allows layers to exchange state information in order to solve the problem and obtain higher performance. The proposed cross layer design of MAC and Routing protocol based the dynamic Sub-channel Assignment Algorithm in [4] to ensure the performance of ad-hoc and multi-hop networks is significantly improved.

Wireless Sensor Networks (WSN) utilizes more nodes to forward messages and information from source node to destination node and these nodes are battery-powered devices. Thus, Energy saving is always vital role of Routing Protocols which need to maximize the lifetime of WSN. Mobile ad hoc networks (MANET) are self-starting and self-constructing multichip wireless networks in which, the assembly of the system deviates vigorously. This is mainly due to the mobility of the nodes. The nodes in the network not only act as hosts but also as routers that route data from other nodes in network. MANETs require an efficient routing protocol that achieves the quality of service (QoS) mechanism. They are not considering the mobility as one constraint for those problems. Because, mobility of nodes causes frequent link failures and high error rates, so it makes difficult to maintain the desired QoS in the network. To overcome those problems, we propose mobility aware routing protocol for MANET using hybrid optimization (MARP-HO) algorithm, which maximizes the QoS in data transmission. The proposed routing protocol comprises of two phases. The clustering process consists of cluster formation and cluster head (CH) selection. First, the energy efficient clustering is done by improved animal migration optimization (IAMO) algorithm. Then, we gather multiple constraints are energy consumption, received signal strength, mobility and cooperative rate from each cluster member. The gathered constraints used to compute the node cost of each cluster member, here the highest cost node act as CH of cluster. Second, we compute routing path between source–destination using improved ant colony optimization (IACO) algorithm. The proposed MARP-HO routing protocol is compared with existing state-of-art routing protocols in terms of energy consumption, delivery ratio, loss ratio, link stability, delay, network lifetime, number of dead nodes and throughput.

We introduce WRP-Lite, which is a table-driven routing protocol that uses non-optimal routes, and compare its performance with the performance of the dynamic source routing (DSR) protocol, which is an on-demand routing protocol for wireless ad-hoc networks. We evaluate the performance of WRP-Lite and DSR for varying degree of mobility and traffic in a 20-node network. The performance parameters are end-to-end delay, control overhead, percentage of packets delivered, and hop distribution. We show that WRP-Lite has much better delay and hop performance while having comparable overhead to DSR.

Wireless technology based on the IEEE 802.11 standard is widely deployed. This technology is used to support multiple types of communication services (data, voice, image) with different QoS requirements. MANET (Mobile Adhoc NETwork) does not require a fixed infrastructure. Mobile nodes communicate through multihop paths. The wireless communication medium has variable and unpredictable characteristics. Furthermore, node mobility creates a continuously changing communication topology in which paths break and new one form dynamically. The routing table of each router in an adhoc network must be kept up-to-date. MANET uses Distance Vector or Link State algorithms which insure that the route to every host is always known. However, this approach must take into account the adhoc networks specific characteristics: dynamic topologies, limited bandwidth, energy constraints, limited physical security, ... Two main routing protocols categories are studied in this paper: proactive protocols (e.g. Optimised Link State Routing - OLSR) and reactive protocols (e.g. Ad hoc On Demand Distance Vector - AODV, Dynamic Source Routing - DSR). The proactive protocols are based on periodic exchanges that update the routing tables to all possible destinations, even if no traffic goes through. The reactive protocols are based on on-demand route discoveries that update routing tables only for the destination that has traffic going through. The present paper focuses on study and performance evaluation of these categories using NS2 simulations. We have considered qualitative and quantitative criteria. The first one concerns distributed operation, loop-freedom, security, sleep period operation. The second are used to assess performance of different routing protocols presented in this paper. We can list end-to-end data delay, jitter, packet delivery ratio, routing load, activity distribution. Comparative study will be presented with number of networking context consideration and the results show the appropriate routing protocol for two kinds of communication services (data and voice).

In this paper, a dynamic Sub-channel Assignment Algorithm (DSA) based on orthogonal frequency division multiple access (OFDMA) technology operating in time division duplexing (TDD) and a new routing protocol are proposed. The proposed dynamic Sub-channel Assignment Algorithm solves several drawbacks of existing radio resource allocation techniques in OFDM system used in ad-hoc and multi-hop networks, such as the hidden and exposed node problem, mobility, co-channels interference in frequency (CCI). The proposed routing protocol is jointed with the MAC protocol based the algorithm to ensure the mobility and multi-hop, thus the quality of service in ad-hoc and multi-hop networks is significantly improved.