Descendant adaptive filter to remove different noises from ECG signals

This paper introduces an effective hybrid scheme for the denoising of electrocardiogram (ECG) signals corrupted by non-stationary noises using genetic algorithm (GA) and wavelet transform (WT). We first applied a wavelet denoising in noise reduction of multi-channel high resolution ECG signals. In particular, the influence of the selection of wavelet function and the choice of decomposition level on efficiency of denoising process was considered. Selection of a suitable wavelet denoising parameters is critical for the success of ECG signal filtration in wavelet domain. Therefore, in our noise elimination method the genetic algorithm has been used to select the optimal wavelet denoising parameters which lead to maximize the filtration performance. The efficiency performance of our scheme is evaluated using percentage root mean square difference (PRD) and signal to noise ratio (SNR). The experimental results show that the introduced hybrid scheme using GA has obtain better performance than the other reported wavelet thresholding algorithms as well as the quality of the denoising ECG signal is more suitable for the clinical diagnosis.

Electrocardiogram (ECG) signals are crucial for monitoring cardiac activity and diagnosing various cardiovascular conditions. However, these signals are often contaminated by different types of noise, such as baseline wander, muscle artifacts, and power line interference, which can obscure critical information and hinder accurate diagnosis. This study used a 1-Dimensional Convolutional Neural Network (1D CNN) architecture with seven convolutional layers for denoising ECG signals. The model utilizes a fully convolutional autoencoder approach, comprising an encoder that transforms noisy input signals into compact feature representations and a decoder that reconstructs the cleaned signals. The proposed architecture was tested using the MIT-BIH Noise Stress Test Database, which includes ECG recordings with simulated noise conditions. Performance evaluation metrics such as Mean Squared Error (MSE), Signal-to-Noise Ratio (SNR), and Mean Absolute Deviation (MAD) were used to assess the model's effectiveness. Results showed a low MSE of 0.034, a high SNR of 15.8 dB, and a MAD of 0.754, indicating significant noise reduction and high-quality signal reconstruction. These findings demonstrate that the 1D CNN architecture effectively reduces various types of noise in ECG signals, thereby enhancing signal quality and facilitating more accurate analysis and diagnosis. The model's ability to maintain the integrity of crucial ECG features while removing noise suggests its potential utility in clinical applications for improving cardiovascular disease diagnosis

PO-04-175 RECONSTRUCTING TWELVE-LEAD ELECTROCARDIOGRAM SIGNALS FROM A SINGLE-LEAD SIGNAL USING GENERATIVE ADVERSARIAL NETWORKS

An electrocardiogram (ECG) signal is an important diagnostic tool for cardiologists to detect the abnormality. In continuous monitoring, an ambulatory huge amount of ECG data is involved. This leads to high storage requirements and transmission costs. Hence, to reduce the storage and transmission cost, there is a requirement for an efficient compression or coding technique. One of the most promising compression techniques is Compressive Sensing (CS) which makes efficient compression of signals. By this methodology, a signal can easily be reconstructed if it has a sparse representation. This paper presents the Block Sparse Bayesian Learning (BSBL)-based multiscale compressed sensing (MCS) method for the compression of ECG signals. The main focus of the proposed technique is to achieve a reconstructed signal with less error and more energy efficiency. The ECG signal is sparsely represented by wavelet transform. MIT-BIH Arrhythmia database is used for testing purposes. The Huffman technique is used for encoding and decoding. The signal recovery is appropriate up to 75% of compression. The quality of the signal is ascertained using the standard performance measures such as signal-to-noise ratio (SNR) and Percent root mean square difference (PRD). The quality of the reconstructed ECG signal is also validated through the visual method. This method is most suitable for telemedicine applications.

Electrocardiogram (ECG) signal recording is a challenging task in the field of biomedical engineering. ECG is the cardiac recording of systematic electrical activity arising from the electro-physiological rhythm of the heart muscle. But, during processing, the ECG signal is contaminated with different types of noise in the medical environment. An immense task is the separation of the preferred signal from noises caused by artifacts like muscle noise, power line interference (PLI), baseline wandering (BW), and motion artifacts (MA). Hence, our paper focuses on 50 Hz PLI which is a major artifact/noise affecting the recorded ECG signal. This paper comprehensively reviews fundamental concepts of different denoising techniques. Some of the pioneers’ works are also concisely explained in the paper. Further, in this work, comparative analysis is carried out using notch filter, adaptive filter, discrete wavelet transform (DWT) and empirical mode decomposition (EMD) for filtering 50 Hz PLI noise. A considerable improvement in signal-to-noise ratio (SNR) can be observed from the results when compared with SNR input and SNR output values. Performance comparisons of all the four techniques are also analyzed based on variations in noise frequency. The simulations were carried out in the environment of MATLAB 2019b®. This work epitomizes the significance of our quantitative evaluation, in which adaptive filters are found to perform better with respect to the SNR, whereas DWT performs better with assessment of mean square error (MSE).

This research clearly demonstrates the comparative performance study of Least Mean Square (LMS) adaptive and fixed Notch filter in terms of simulation results and different performance parameters (mean square error, signal to noise ratio and percentage root mean square difference) for removing structured noise (50 Hz line interference and its harmonics) and baseline wandering from electrocardiogram (ECG) signal. The ECG samples collected from the PhysioNet ECG-ID database are corrupted by adding structured noise and base line wandering noise. The simulation results and numerical performance analysis of this research clearly show that LMS adaptive filter can remove noise efficiently from ECG signal than fixed notch filter

Electrocardiogram (ECG) is the graphical illustration of the heart’s electrical activity and it is acquired through linking electrodes to body surface. It is useful in determining cardiac diseases non-invasively. The general concerns in ECG signal processing is the restrain of noise. This paper has been encouraged by the necessary to recognize the ability of Savitzky-Golay (SG) filter for denoising the ST segment of ECG signals. It essentially implicates the extraction of essential cardiac components by refusing the background noise with the aid of filtering technique. The simulation is carried out using MATLAB and the experiments are performed on physionet database. Peak Signal-to-Noise Ratio (PSNR), Signal-to-Noise Ratio (SNR), Mean Square Error (MSE) and Percentage Root mean square Difference (PRD) are used as performance evaluation metrics. This work uses SG filter to denoise the ECG signal and comparison is provided for SG filter with Median, Butterworth and SOS filters. The comparison results states the performance of the SG filter is better than that of the other filters.

In this paper, a transform based methodology is presented for compression of electrocardiogram (ECG) signal. The methodology employs different transforms such as Discrete Wavelet Transform (DWT), Fast Fourier Transform (FFT) and Discrete Cosine Transform (DCT). A comparative study of performance of different transforms for ECG signal is made in terms of Compression ratio (CR), Percent root mean square difference (PRD), Mean square error (MSE), Maximum error (ME) and Signal-to-noise ratio (SNR). The simulation results included illustrate the effectiveness of these transforms in biomedical signal processing. When compared, Discrete Cosine Transform and Fast Fourier Transform give better compression ratio, while Discrete Wavelet Transform yields good fidelity parameters with comparable compression ratio.

In recent years, Electrocardiogram (ECG) plays an imperative role in heart disease diagnostics, Human Computer Interface (HCI), stress and emotional states assessment, etc. In general, ECG signals affected by noises such as baseline wandering, power line interference, electromagnetic interference, and high frequency noises during data acquisition. In order to retain the ECG signal morphology, several researches have adopted using different preprocessing methods. In this work, the stroop color word test based mental stress inducement have done and ECG signals are acquired from 10 female subjects in the age range of 20 years to 25 years. We have considered the Discrete Wavelet Transform (DWT) based wavelet denoising have incorporated using different thresholding techniques to remove three major sources of noises from the acquired ECG signals namely, power line interference, baseline wandering, and high frequency noises. Three wavelet functions (db4, coif5 and sym7) and four different thresholding methods are used to denoise the noise in ECG signals. The experimental result shows the significant reduction of above considered noises and it retains the ECG signal morphology effectively. Four different performance measures were considered to select the appropriate wavelet function and thresholding rule for efficient noise removal methods such as, Signal to Interference Ratio (SIR), noise power, Percentage Root Mean Square Difference (PRD) and finally periodogramof Power Spectral Density (PSD). The experimental result shows the coif5 wavelet andrigrsurethresholding rule is optimal for unknown Signal to Noise Ratio (SNR) in the real time ECG signals.

Baseline wander and power line interference removal from ECG signals using eigenvalue decomposition

Electrocardiogram (ECG) signal quality indices (SQIs) are essential for improving diagnostic accuracy and reliability of ECG analysis systems. In various practical applications, the ECG signals are corrupted by different types of noise. These corrupted ECG signals often provide insufficient and incorrect information regarding a patient’s health. To solve this problem, signal quality measurements should be made before an ECG signal is used for decision-making. This paper investigates the robustness of existing popular statistical signal quality indices (SSQIs): relative power of QRS complex (SQIp), skewness (SQIskew), signal-to-noise ratio (SQIsnr), higher order statistics SQI (SQIhos) and peakedness of kurtosis (SQIkur). We analysed the robustness of these SSQIs against different window sizes across diverse datasets. Results showed that the performance of SSQIs considerably fluctuates against varying datasets, whereas the impact of varying window sizes was minimal. This fluctuation occurred due to the use of a static threshold value for classifying noise-free ECG signals from the raw ECG signals. Another drawback of these SSQIs is the bias towards noise-free ECG signals, that limits their usefulness in clinical settings. In summary, the fixed threshold-based SSQIs cannot be used as a robust noise detection system. In order to solve this fixed threshold problem, other techniques can be developed using adaptive thresholds and machine-learning mechanisms.

Electrocardiogram (ECG) signal enhancement is necessary in telemedicine. In such ECG monitoring systems, noises like muscle artifacts, electrode motion and baseline wander are often embedded in the ECG signals during acquisition and transmission. In this study, a novel method is proposed for the ECG signal enhancement based on the finding that ECG signals extracted over a big data share significant similarities in the morphology for a particular person. We construct a guided filter and reform it by a Butterworth high-pass filter. The Butterworth high-pass filter is utilized to remove the baseline wander. The advantageous edge-preserving guided filter is then applied to remove the rest noise, of which frequencies are between the ECG signals. Very promising results with high accuracy and the edge-preserving features have been achieved in the comparative experiments. We evaluated the proposed denoising method using ECG signals from the MIT-BIH Arrhythmia database and the Noise Stress Test database. The experimental results demonstrate that the proposed method achieves better signal-to-noise ratio (SNR) and lower root mean square error (RMSE) when compared to the wavelet with subband dependent thresholding (WT-Subband), Back Propagation Neural Network and Stockwell transform methods. Using the proposed method, the average output SNR ranges from 8.57 to 19.28 dB, and the average RMSE is less than 0.41.

Electrocardiogram (ECG) compression can significantly reduce the storage and transmission burden in telemedicine applications. In this paper, an improved ECG data compression method using ASCII character encoding is proposed. A QRS detection algorithm firstly applied to separate QRS and non-QRS region. Then, the QRS regions of ECG signal are compressed using lossless method and non-QRS regions are compressed using lossy method, which improves the compression ratio and minimise the reconstruction error between original and reconstructed ECG signal. All tested ECG records are selected from the PTB database. Statistical results show that the compression performance of the proposed method is better than both lossless and lossy ECG data compression technique. The average compression ratio (CR) and percent root mean square difference (PRD) obtained using proposed ECG data compression method are 27.40 and 4.753 respectively, which is better than other existing ECG data compression method.

This work presents a proficient approach of designing an M-band Near Perfect Reconstruction (NPR) Cosine Modulated Filter Bank (CMFB) where the NPR condition is built upon to satisfy the power complementary property and the pass-edge frequency is repetitively varied to adjust the filter-coefficients to reduce the reconstruction error occurred. Using this optimal value of the pass-edge frequency, the prototype filter is designed and the filter bank is considered from that single prototype filter. Thus the primary goal of designing the CMFB comes down to the issue of implementing efficient structure of this prototype filter. Now the prototype filter is designed with Interpolated Finite Impulse Response (IFIR) technique where numbers of hardware multipliers are reduced by cascading model and image suppression filter compared to that of single prototype filter and furthermore the designed filter coefficients are replaced with Canonical Signed Digit (CSD) to get lesser hardware complexity. To make the system practically realizable, an Electrocardiogram (ECG) signal is processed through this system and reconstructed back again. Some quality measurement parameters such as Signal-to-Noise Ratio (SNR), Mean Square Error (MSE) and Percentage Root Mean Square Difference (PRD) are analyzed to see the effectiveness of the CMFB.

<title>Abstract</title> Electrocardiogram (ECG) signals are critical to identify various cardiac abnormalities. However, the accuracy of ECG-based clinical interpretations can be significantly compromised due to contamination from various artifacts. Traditional ECG denoising methods often struggle to maintain the balance between noise suppression and preservation of essential ECG characteristics. This study presents, for the first time, a deep learning (DL)-based autoencoder (AE) for robust ECG denoising and artifact cancellation and automated ECG diagnosis and classification. Unlike traditional methods, AEs are designed to learn efficient data representations, making them well-suited for distinguishing between clean signals and noise without extensive computational demands. The proposed approach leverages the PTB Diagnostic ECG Database (PTBdb) and introduces various types of noise derived from the MIT-BIH Noise Stress Test Database, including muscle artifacts (MA), electrode motion artifacts (EM), baseline wander (BW), and their combinations. The proposed AE model is trained to eliminate these noise components effectively while preserving the critical morphological features of the ECG signals. To assess the performance of the introduced method, comprehensive experiments are performed to compare clean, noisy, and AE denoised ECG signals. The AE's performance is further benchmarked against classical denoising techniques, assessing key metrics such as signal to noise ratio (SNR), mean square error (MSE), root mean square error (RMSE) and a percent root-mean square difference (PRD). The results elucidate that the introduced AE-based denoising framework not only outperforms conventional techniques in noise suppression but also enhances the reliability of ECG signal interpretation, making it an effective solution for implementation in clinical settings.