Designing secure networks with q-composite key predistribution under different link constraints

Wireless industrial sensor networks are wireless sensor networks which have been adapted to industrial applications. Most techniques for wireless sensor networks can be applied to wireless industrial sensor networks. However, for industrial applications of wireless industrial sensor networks, new requirements such as real-time, reliable delivery need to be considered. In this paper, we propose EARQ, which is a novel routing protocol for wireless industrial sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In EARQ, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that EARQ is suitable for industrial applications, due to its capability for energy efficient, real-time, reliable communications.

The wireless sensor network is an emerging technology, which is used to sense and monitor the environment. As the nodes are deployed in an open environment, the security is one of the essential factors. The cryptography techniques can ensure confidentiality, integrity and authentication. However, wireless sensor network also needs to deal with inside and outside attackers. To deal with outside attackers, attacks by compromised or malicious nodes, trust management system is suggested by many researchers in the area of wireless sensor network. Trust management system can be implemented in various applications for security management such as secure data aggregation, secure cluster head selection, trusted routing, access control, etc. Many researchers provide different kind of solutions for these secure applications based on trust management. However, to incorporate, all such applications on a single sensor node in the network, it is essential to design and develop a trust management system, which considers various aspects and applications of wireless sensor network. As a result, in this paper, we would like to propose a parameter and trust factor based secure communication framework and design a trust management system for wireless sensor networks. Our main contribution is to identify various parameters and trust factors which influences on trust in wireless sensor network and developing a framework for a trust management system based on various parameters and trust factors. The working of the proposed model is shown by simulation experiments conducted in MATLAB for the application of secure communication, data aggregation and intrusion detection in wireless sensor networks.

Directional antennas in wireless sensor networks (WSNs) have several advantages including the enhanced capacity of the network, longer range of transmission, better spatial reuse and lower interference. By enhancing the alleviating contention and the range of communication, the directional antennas improve the performance of WSNs. In common, various methods like localisation, power management, data aggregation and optimisation obtain these advantages in WSNs; however, the reliability requirements and the energy concerns make the antenna technology more advantageous. When compared with methods, in which the directional antennas provide advantages like the extended range of transmission, energy savings, better prevention of wormhole attack, long coverage and high interference tolerance. This review provides a detailed study of recent improvements and open research problems on directional antennas in WSN applications. First, the introduction and the background of directional antennas briefly based on their classification radiation patterns and advantages in directional communication in WSNs. During the past years, a number of directional antennas are designed for the applications of WSNs. In this study, recently developed directional antennas and their applications in WSNs are reviewed. The applications of directional antenna in WSNs are classified into security benefits, localisation, convergecast, contention reduction and energy efficiency.

Wireless sensor networks consist of a large number of low-cost, low-power, and multifunctional sensor nodes that communicate over short distances through wireless links. Such sensor networks are ideal candidates for a wide range of applications such as monitoring of critical infrastructures, data acquisition in hazardous environments, industry control systems, vehicular networks, and military operations. Wireless sensor networks introduce new security challenges due to their dynamic topology, severe resource constraints, and absence of a trusted infrastructure. The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances of wireless sensor network security. In this special issue, we will explore the topic of security challenges and solutions for the wide application of wireless sensor networks in different areas, such as RFID and smart grid. RFID has been widely used in logistics and internet of things. Smart grid leverages sensor networks to better balance the load of the power grid. Both of them have great impact on the daily life and areweak points of thewhole economy,which attract the attention of terrorists. The feasible attacks and defense solutions are still not clear.The papers in this volume also cover several important foundational security services for wireless sensor networks, such as key management, key distribution, secure cluster formation, secure architecture for multihop communication, intrusion prediction, and secure localization. All these foundational security services are critical bases for application of wireless sensor networks. We hope that the papers in this volume engender further thinking about new security challenges for wireless sensor networks and even further “out-of-the-box” ideas about how to solve new security problems for wireless sensor networks.

Monitoring and automatic control of building environment is a crucial application of Wireless Sensor Network (WSN) in which maximizing network lifetime is a key challenge. Previous research into the performance of a network in a building environment has been concerned with radio propagation within a single floor. We investigate the link quality distribution to obtain full coverage of signal strength in a four-storey building environment, experimentally. Our results indicate that the transitional region is of particular concern in wireless sensor network since it accommodates high variance unreliable links. The transitional region in a multi-storey building is mainly due to the presence of reinforced concrete slabs at each storey and the fac┬©ade which obstructs the radio signal and introduces an additional absorption term to the path loss.

Continuous-monitoring (CM) of natural phenomenon is one of the major streams of applications in wireless sensor networks (WSNs), where aggregation and clustering techniques are beneficial as correlation dominates in both spatial and temporal aspects of sensed phenomenon. Conversely, in Event Driven Reporting (EDR), the efficient transmission of sensitive data related to some predefined alarm cases is of major importance. As such, reporting latency is a more important performance parameter. However, in some applications, the transmission of both CM and EDR data is encouraged or even required. For either CM or EDR applications, system performance can be greatly improved when both the number of packets to be transmitted as well as the packet size is reduced. This is especially true for highly dense sensor networks where many nodes detect the same values for the sensed phenomenon. Building on this, this paper focuses on studying and proposing compression techniques to improve the system performance in terms of energy consumption and reporting latency in both CM and EDR applications. Furthermore, we extend our analysis to hybrid networks where CM and EDR are required simultaneously. Specifically, this paper presents a simple aggregation technique named smart aggregation (SAG) for the CM applications and an event driven scheme named compression cluster scheme in spatial correlated region (CC_SCR). The proposed SAG exploits both spatial and temporal correlations where CC_SCR exploits the spatial correlation of such networks by data compression. Rationalizing the developments is attained by simulations that compare energy efficiency of the proposed SAG with k-hop aggregation and CM based event driven reporting (CMEDR) schemes. Results of CC_SCR show that the technique may reduce the energy consumption drastically. In some specific cases the reduction becomes more than 10 times compared to a classical clustering scheme. Two different strategies for the transmission of event reports through the CM infrastructure are incorporated: PER and NPER protocols. Both strategies take advantage of the cluster-based architecture which assigns a TDMA schedule for the CM data transmission while using NP/CSMA for the transmission of the event information. Consequently, no extra energy is consumed for separate event clusters. As such, the number of packets to be transmitted is greatly reduced.

Multicast is essential for wireless sensor network (WSN) applications. Existing multicast protocols in WSNs are often designed in a P2P pattern, assuming small number of destination nodes and frequent changes in network topologies. In order to truly adopt multicast in WSNs, we propose a base-station model-based multicast, SenCast, to meet the general requirements of applications. SenCast is scalable and energy-efficient for large group communications in WSNs. Theoretical analysis shows that SenCast is able to approximate the Minimum Nonleaf Nodes (MNN) problem to a ratio of ln ∣R∣ (R is the set of all destinations), the best known lowest bound. We evaluate our design through comprehensive simulations and prototype implementations on Mica2 motes. Experimental results demonstrate that SenCast outperforms previous multicast protocols including the most recent work uCast.

Wireless network of wearable biomedical sensors by human body shows great potential to enhance the biometrics performance significantly. Meanwhile, it poses prominent characteristics and challenges to physicians and engineers for its particular medical application as compared to other application of wireless sensor networks (WSN). Mobility pattern plays an important role in designing the wireless body sensor networks (WBSN) and will also affect the accuracy of modeling WBSN in health care application. Much of the mobility scenarios generated in current work of wireless body sensor networks has used fairly simple models to generate the mobile topological graph, which bear little resemblance to the actual mobility patterns. This paper is the first attempt to investigate the mobility model in WBSN based on the existing mobility models in wireless data networks and ad hoc networks. We first briefly review the existing mobility models in related research areas such as wireless ad hoc network and cellular networks. Further on, we propose a dedicated and more realistic mobility model named BAMM (Body Area Mobility Model) for wireless body sensor networks by concentrating on the unique characteristics of WBSN and finally study the effects of mobility on the performance of WBSN by simulation experiments.

Resource Management Approach to an Efficient Wireless Sensor Network

Congestion in Wireless Sensor Network (WSN) occurs when traffic load allocated to any sensor node is beyond its capacity. It is necessary to control the congestion traffic to support traditional quality of service (such as packet loss ratios, packet delay, wasting energy and throughput) especially, multimedia application of Wireless Multimedia Sensor Network (WMSN). Congestion control in WSN has been shown to be very effective with respect to extending lifespan of system. Hence to avoid the congestion in WSN, we proposed an efficient protocol called Priority-based Congestion Control Protocol (PCCP) which prevents an upstream congestion in WSN. The PCCP creates priority table based an importance of each node, and then sends this information to all the nodes within the network. Secondly, the major function of PCCP is to measure congestion level in the network using ratio of packet inter-arrival time along over packet service time. PCCP uses to control upstream congestion along with congestion degree and packet table. PCCP is hop-by-hop upstream congestion control protocol for WSN. PCCP provides work for packet-based computation to optimize congestion control. It can work under both single path & multipath routing. PCCP ensures guarantee of packet loss as well as delay, resulting each node can avoid unfairness and achieve flexible throughput. In this paper, we have proposed that PCCP provides better QoS by controlling network recourse management and network traffic to consuming efficient energy.

The Wireless sensor network has a great applied prospect, so the military, academia and industry pay more and more extensive attention. The first, this article introduces the concept of sensor networks and development background; the second, compared with traditional networks, it summarizes the characteristics of sensor networks. In this basis, the application of the sensor network and the direction of the current study are a given brief introduction and a further discussion.

We present a case study that considers the application of runtime verification technology to a wireless sensor application. The case study is performed using the SURGE TinyOS application for multi-hop routing, which executes on the Avrora TinyOS simulator. We discuss the problems we have encountered in the course of case study. The problems include unclear correctness properties for wireless network applications (indicating ad hoc development process) and inadequate tool support. A wireless sensor network usually comprises of a collection of tiny devices with built-in processors that can gather physical and environment information such as temperature, light, sound, etc., and communicate with one another over radio. Many wireless sensor network applications sit on top of an operating system called TinyOS and are mostly written in nesC, an extension of C that provides a component-based programming paradigm. Most of wireless sensor network applications are developed and tested on a simulator before they are deployed in the environment because testing and debugging directly on physical devices are very difficult, especially when the network consists of many nodes, and may not provide enough information for debugging. A simulator usually produces detailed execution information and can help find errors. However, even with the simulator and nesC, the current state of development tools for wireless sensor network still requires very low-level programming, which makes it hard for the developers to maintain a high-level view of the system operation. During the validation stage, lack of sophisticated debugging tools for sensor networks makes it difficult to make the connection between a high-level functional or performance requirement and a particular aspect of system implementation. This paper investigates a high-level approach to examine execution data from a simulator and analyze it using runtime verification. The technique 1) identifies and formally specifies high-level requirements for the system under development, 2) monitors a distributed wireless sensor network application using data provided by the simulator, and 3) checks for timing and dynamic properties to gain understanding of the relevant behaviors of wireless sensor nodes and to provide a systematic approach in finding bugs and errors. A particular runtime verification used inthis paper is MaC. MaC provides specification languages capable of expressing functional, timing, and probabilistic properties to specify requirements or patterns of errors. Properties can, for example, examine periodic behaviors or identify a faulty node. MaC then monitors and checks a wireless sensor network application against its specification by observing data produced by a simulator. The motivation for applying the monitoring and checking technique to check wireless sensor network applications is threefold: 1) raise the development level for wireless sensor network, 2) provide a mechanism for understanding high-level behaviors of the system in terms of low-level observation, and 3) provide a tool based on the acceptance of the state of the art development tool for sensor networks.

Recently, the use of wireless sensor networks has spread to applications areas that are not viable or costefficient to be run on other types of networks. Due to some critical tasks done in these types of networks, the majority of sensor networks applications should be dependable and should be run continuously and reliably without interruption. Hence, the two more significant dependability factors that should be nowadays taken into account in developing wireless sensor networks applications are ‘availability’ and ‘reliability’ of application services. The specific characteristics and constraints of wireless sensor networks require a different interpretation of these two factors when developing applications for such networks. In this paper, we propose a middleware layer mechanism for satisfying these two factors as more important dependability issues in sensor networks applications. We propose an event-based middleware service that is specifically designed for wireless sensor networks in which a group of sensor nodes forms a cluster and a replicated service is run on each cluster head. The communication model among cluster members and cluster head is based on the publish/subscribe scheme. We show how the replicated services and communication model in cluster nodes satisfy dependability issues and increase the availability and reliability of applications running under the proposed middleware.

Error control coding improves reliability and efficiency of wireless communication systems. This research delves into the latest advancements in error control coding schemes for wireless communication systems, with a specific focus on their application within the domain of Low Power Wide Area Networks (LPWANs) such as Narrowband Internet of Things (NB-IoT) systems, LoRa energy-efficient hardware design, random access control systems, and wireless sensor networks. In the context of LPWANs, particularly NB-IoT systems, we investigate the adaptive coding and modulation (ACM) in NB-IoT systems, which adapts coding rates and modulation techniques to changing channel circumstances. Comprehensive analysis of the literature review shows that the proposed approaches are more energy efficient and less error-prone than fixed coding and modulation schemes. Using Cell Design Methodology (CDM), Single Error Correction (SEC) codes are optimized for energy efficiency. Power and energy efficiency have improved in standard CMOS and CDM logic systems. This impacts IoT devices, memory storage, and security systems. Next, Forward Error Correction (FEC) is examined for ALOHA-based random-access control systems wherein packet loss rate and spectral efficiency metrics are mathematically calculated. FEC is beneficial, especially when time and frequency synchronization diverge. Monte Carlo simulations studied in the literature shows that FEC improves satellite communication systems. This review establishes benefits of FEC, notably in satellite communications systems. In addition, Wireless Sensor Networks (WSNs) error control techniques and network reliability and performance are examined along with Convolutional, Turbo, Low density parity check codes(LDPC), and Polar error correction coding (ECC) methods. We learn about their benefits, drawbacks, and implementation challenges by assessing their efficacy, efficiency, and applicability in wireless sensor networks (WSN) applications. This study further highlights advancements of energy-efficient error control coding when, integrated into network designs alongwith the trade-offs between efficacy and intricacy to help improve wireless communication networks. Finally, this study summarizes current error control coding approaches for wireless communication systems. We provide insights into improving reliability, energy conservation, and efficacy by examining ACM, CDM, FEC, and error correction coding (ECC) across varied domains including LPWAN and IoT technologies with earnest hope to facilitate researchers, engineers, and professionals working in the field of error control coding in wireless communication.

Distributed audio sensing with homeostasis-inspired autonomous communication