Detecting Cryptomining Malware: a Deep Learning Approach for Static and Dynamic Analysis

Since it is one of the world's most significant financial markets, the foreign exchange (Forex) market has attracted a large number of investors. Accurately anticipating the forex trend has remained a popular but difficult issue to aid Forex traders' trading decisions. It is always a question of how precise a Forex prediction can be because of the market's tremendous complexity. The fast advancement of machine learning in recent decades has allowed artificial neural networks to be effectively adapted to several areas, including the Forex market. As a result, a slew of research articles aimed at improving the accuracy of currency forecasting has been released. The Long Short-Term Memory (LSTM) neural network, which is a special kind of artificial neural network developed exclusively for time series data analysis, is frequently used. Due to its high learning capacity, the LSTM neural network is increasingly being utilized to predict advanced Forex trading based on previous data. This model, on the other hand, can be improved by stacking it. The goal of this study is to choose a dataset using the Hurst exponent, then use a two-layer stacked Long Short-Term Memory (TLS-LSTM) neural network to forecast the trend and conduct a correlation analysis. The Hurst exponent (h) was used to determine the predictability of the Australian Dollar and United States Dollar (AUD/USD) dataset. TLS-LSTM algorithm is presented to improve the accuracy of Forex trend prediction of Australian Dollar and United States Dollar (AUD/USD). A correlation study was performed between the AUD/USD, the Euro and the Australian Dollar (EUR/AUD), and the Australian Dollar and the Japanese Yen (AUD/JPY) to see how AUD/USD movement affects EUR/AUD and AUD/JPY. The model was compared with Single-Layer Long Short-Term (SL-LSTM), Multilayer Perceptron (MLP), and Complete Ensemble Empirical Mode Decomposition with Adaptive Noise–Improved Firefly Algorithm Long Short-Term Memory. Based on the evaluation metrics Mean Square Error (MSE), Root Mean Square Error, and Mean Absolute Error, the suggested TLS-LSTM, whose data selection is based on the Hurst exponent (h) value of 0.6026, outperforms SL-LSTM, MLP, and CEEMDAN-IFALSTM. The correlation analysis conducted shows both positive and negative relations between AUD/USD, EUR/AUD, and AUD/JPY which means that a change in AUD/USD will affect EUR/AUD and AUD/JPY as recorded depending on the magnitude of the correlation coefficient (r).

This study evaluates the performance of traditional statistical methods, specifically the Seasonal Autoregressive Integrated Moving Average (SARIMA), in comparison to advanced deep learning models—Long Short-Term Memory (LSTM), Bidirectional LSTM (BiLSTM), and Convolutional Neural Network (CNN)—for wind speed forecasting across various regions in Saudi Arabia: Al-Jouf, Abha, Al-Ahsa, and Al-Dawadami. The historical wind speed dataset covering the year 2018 was utilized, with data preprocessing conducted using the Exploratory Data Analysis (EDA) method to ensure consistency and quality. The models were assessed based on three primary error metrics: Mean Absolute Error (MAE), Mean Squared Error (MSE), and Root Mean Square Error (RMSE). Results show that CNN consistently outperforms SARIMA and the other deep learning models, particularly when forecasting stable wind speed patterns. LSTM demonstrates an ability to handle fluctuating wind speeds effectively, while BiLSTM offers advantages in capturing complex bidirectional temporal dependencies. On the other hand, SARIMA generally exhibits lower performance compared to deep learning approaches. The superior performance of CNN is likely attributed to its strength in local feature extraction and handling spatial patterns effectively, which are beneficial for short-term forecasting. These findings provide valuable insights into model selection for wind energy forecasting and can contribute to optimizing renewable energy integration and planning strategies. Future work may explore hybrid model approaches to further enhance forecasting accuracy.

This study constructs a model suitable for studying the performance of a Japanese speech recognition translation system based on a long short-term memory (LSTM) neural network. The impact of the matrix on the accuracy and recognition ratio of the speech recognition system is considered. This study provides a general introduction to the LSTM neural network, gives an overview of a Japanese speech recognition translation system, and presents experimental data to evaluate its performance. Then, the LSTM neural network is recommended for studying the Japanese speech translation recognition system, and a suitable model is established to conduct experiments on the system. By comparing example analyses, the experimental results show that the optimized PLSTM (Part-Aware Long Short-Term Memory) achieved an 8.09% improvement over an unoptimized LSTM network while maintaining recognition accuracy.

The aim of this study was to assess the aptitude of the recurrent Long Short-Term Memory (LSTM) neural networks for fast and accurate predictions of process dynamics in vertical-gradient-freeze growth of gallium arsenide crystals (VGF-GaAs) using datasets generated by numerical transient simulations. Real time predictions of the temperatures and solid–liquid interface position in GaAs are crucial for control applications and for process visualization, i.e., for generation of digital twins. In the reported study, an LSTM network was trained on 1950 datasets with 2 external inputs and 6 outputs. Based on network performance criteria and training results, LSTMs showed the very accurate predictions of the VGF-GaAs growth process with median root-mean-square-error (RMSE) values of 2 × 10−3. This deep learning method achieved a superior predictive accuracy and timeliness compared with more traditional Nonlinear AutoRegressive eXogenous (NARX) recurrent networks.

The prognostics and health management (PHM) plays the main role to handle the risk of failure before its occurrence. Next, it has a broad spectrum of applications including utility networks, energy storage systems (ESS), etc. However, an accurate capacity estimation of batteries in ESS is mandatory for their safe operations and decision making policy. ESS comprises of different storage mechanisms such as batteries, capacitors, etc. Consequently, the measurement of different charging profiles (CPs) has a strong relation to battery capacity. These profiles include temperature (T), voltage (V), and current (I) where the CPs patterns vary as the battery ages with cycles. Consequently, estimating a battery capacity, the conventional methods practice single channel charging profile (SCCP) and hop multiple channel CPs (MCCPs) that cause incorrect battery health estimation. To tackle these issues, this article proposes MCCPs based battery management system (BMS) to estimate batteries health/capacity through the deep learning (DL) concept where the patterns in these CPs are changed as the battery ages with time and cycles. Thus, we deeply investigate both machine learning (ML) and DL based methods to provide a concrete comparative analysis of our method. The adaptive boosting (AB) and support vector regression (SVR) are widely compared with long short-term memory (LSTM), multi-layer perceptron (MLP), bi-directional LSTM (BiLSTM), and convolutional neural network (CNN) to attain the appropriate approach for battery capacity and state of health (SOH) estimation. These approaches have a high learning capability of inter-relation between the battery capacity and variation in CPs patterns. To validate and verify the proposed technique, we use NASA battery dataset and experimentally prove that BiLSTM outperforms all the approaches and obtains the smallest error values for MAE, MSE, RMSE, and MAPE using MCCPs compared to SCCP.

Electrocardiography (ECG) is a technique for observing and recording the electrical activity of the human heart. The usage of an ECG signal is common among clinical professionals in the collection of time data for the examination of any rhythmic conditions associated with a subject. The investigation was carried out in order to computerize the assignment by exhibiting the issue using encoder-decoder techniques, creating the information that was simply typical of it, and utilising misfortune appropriation to anticipate standard or anomalous information. On a broad variety of applications such as voice recognition and prediction, the long short-term memory (LSTM) fully connected layer (FCL) and the two convolutional neural networks (CNNs) have shown superior performance over deep learning networks (DLNs). DNNs are suitable for making high points for a more divisible region and CNNs are suitable for reducing recurrence types, LSTMs are appropriate for temporary displays, in the same way as CNNs are appropriate for reducing recurrence types. The CNN, LSTM, and DNN algorithms are acceptable for viewing. The complementarity of DNNs, CNNs, and LSTMs was investigated in this research by bringing them all together under the single architectural company. The researchers got the ECG data from the MIT-BIH arrhythmia database as a result of the investigation. Our results demonstrate that the approach proposed may expressively describe ECG series and identify abnormalities via scores that outperform existing supervised and unsupervised methods in both the short term and long term. The LSTM network and FCL additionally demonstrated that the unbalanced datasets associated with the ECG beat detection problem could be consistently resolved and that they were not susceptible to the accuracy of ECG signals. It is recommended that cardiologists employ the unique technique to aid them in performing reliable and impartial interpretation of ECG data in telemedicine settings.

Forecasting the short-term metro ridership is an important issue for operation management of metro systems. However, it cannot be solved well by the single long short-term memory (LSTM) neural network alone for the irregular fluctuation caused by various factors. This paper proposes a hybrid algorithm (STL-LSTM) which combines the addition mode of Seasonal-Trend decomposition based on Loess (STL) and the LSTM neural network to mitigate the influences of irregular fluctuation and improve the performance of short-term metro ridership prediction. First, the original series is decomposed into three sub-series by the addition mode of STL. Then, the LSTM neural network is employed to predict each decomposed series. Finally, all the predicted outputs are merged as the overall output. The results show that the STL-LSTM model can achieve higher accuracy than the single LSTM model, support vector regression (SVR), and the EMD-LSTM model which combines the empirical mode decomposition and the LSTM neural network.

The state-of-energy (SOE) and state-of-health (SOH) are two crucial quotas in the battery management systems, whose accurate estimation is facing challenges by electric vehicles’ (EVs) complexity and changeable external environment. Although the machine learning algorithm can significantly improve the accuracy of battery estimation, it cannot be performed on the vehicle control unit as it requires a large amount of data and computing power. This paper proposes a joint SOE and SOH prediction algorithm, which combines long short-term memory (LSTM), Bi-directional LSTM (Bi-LSTM), and convolutional neural networks (CNNs) for EVs based on vehicle-cloud collaboration. Firstly, the indicator of battery performance degradation is extracted for SOH prediction according to the historical data; the Bayesian optimization approach is applied to the SOH prediction combined with Bi-LSTM. Then, the CNN-LSTM is implemented to provide direct and nonlinear mapping models for SOE. These direct mapping models avoid parameter identification and updating, which are applicable in cases with complex operating conditions. Finally, the SOH correction in SOE estimation achieves the joint estimation with different time scales. With the validation of the National Aeronautics and Space Administration battery data set, as well as the established battery platform, the error of the proposed method is kept within 3%. The proposed vehicle-cloud approach performs high-precision joint estimation of battery SOE and SOH. It can not only use the battery historical data of the cloud platform to predict the SOH but also correct the SOE according to the predicted value of the SOH. The feasibility of vehicle-cloud collaboration is promising in future battery management systems.

Recent user recognition technologies have focused on biometric signals to remotely identify users in the access management, medical welfare, and public sectors. The electrocardiogram (ECG) signal is an individual’s unique electrophysiological signal generated within the body and is difficult to forge or change; thus, it can be used to uniquely identify the user. Existing user identification systems based on ECG signals detect R peaks according to morphological features and use a fiducial-based segmentation process for data normalization. However, this process does not detect a distinct R peak due to motion artifacts generated by the movement of the subject, thereby degrading identification accuracy. To address the problem of decreasing peak accuracy of the fiducial-based segmentation data, this study proposes a user identification system based on one-dimensional neural networks using periodic non-fiducial-based segmentation data that do not overlap in the time domain. The proposed system comprises a preprocessing step for data denoising, a non-fiducial-based and non-overlap segmentation step, and a step for classifying users using a one-dimensional shallow neural network. In the experiment, when using self-acquired 10-second ECG signal data that were divided into non-fiducial and non-overlapping segments, the long short-term memory (LSTM), bidirectional LSTM, and one-dimensional convolutional neural network (CNN) models achieved accuracies of 92.01%, 93.13%, and 95.51%, respectively, with the 1D CNN model exhibiting the best accuracy. The proposed system demonstrated a 25.48% improvement in accuracy on non-fiducial segmented data compared to the 1D CNN model, which achieved an accuracy of 70.03% on fiducial segmented data. Moreover, when tested on publicly available ECG datasets, including MIT-BIH, ECG-ID, and PTB-XL, the proposed system exhibited a user identification accuracy of over 94%, confirming its superior performance.

The emission of NOx in thermal power plants would cause serious pollution to the environment, and effective prediction of NOx has important significance. With the development of deep learning, many methods can effectively solve the prediction problem. In this paper, a long short-term memory (LSTM) neural network based on the generalized correntropy (GC) loss function, which is called the GC-LSTM neural network here, is proposed to predict the NOx emission. In order to make the characteristics of high-dimensional data have the same measurement scale, normalization is used to preprocess data firstly. Then, the processed historical data is used as training data to train the GC-LSTM neural network. After that, the emission of the NOx at each time instant can be predicted according to the online measured relevant data based on the established GC-LSTM neural network. Finally, prediction results under the LSTM neural network with GC, mean square error (MSE) and the mean absolute error (MAE) loss functions are given. And according to the simulation results, it can be seen that the loss function curve of the LSTM network based on GC is more stable and has better convergence. It can be seen that the proposed GC-LSTM prediction is more accurate, by comparing the probability density function (PDF) and root mean square error (RMSE) of the error between the actual values and the prediction values.

A novel prediction model for ship fuel consumption considering shipping data privacy: An XGBoost-IGWO-LSTM-based personalized federated learning approach

In response to the need for an exoskeleton to quickly identify the wearer’s movement mode in the mixed control mode, this paper studies the impact of different feature parameters of the surface electromyography (sEMG) signal on the accuracy of human motion pattern recognition using multilayer perceptrons and long short-term memory (LSTM) neural networks. The sEMG signals are extracted from the seven common human motion patterns in daily life, and the time domain and frequency domain features are extracted to build a feature parameter dataset for training the classifier. Recognition of human lower extremity movement patterns based on multilayer perceptrons and the LSTM neural network were carried out, and the final recognition accuracy rates of different feature parameters and different classifier model parameters were compared in the process of establishing the dataset. The experimental results show that the best accuracy rate of human motion pattern recognition using multilayer perceptrons is 95.53%, and the best accuracy rate of human motion pattern recognition using the LSTM neural network is 96.57%.

Long Short-term Memory (LSTM) is a sub set of recurrent neural network (RNN) which is specifically used to train to learn long-term temporal dynamics with sequences of arbitrary length. In this paper, long short-term memory (LSTM) architecture is followed for Android malware detection. The data set for evaluation contains real known benign and malware applications from static and dynamic analysis. To achieve acceptable malware detection rates with low computational cost, various LSTM network topologies with several network parameters are used on all extracted features. A stacked LSTM with 32 memory blocks containing one cell each has performed well on detection of all individual behaviors of malicious applications in comparison to other traditional static machine learning classifier. The architecture quantifies experimental results up to 1000 epochs with learning rate 0.1. This is primarily due to the reason that LSTM has the potential to store long-range dependencies across time-steps and to correlate with successive connection sequences information. The experiment achieved the Android malware detection of 0.939 on dynamic analysis and 0.975 on static analysis on well-known datasets.

Malware classification plays an important role in tracing the attack sources of computer security. However, existing static analysis methods are fast in classification, but they are inefficient in some malware using packing and obfuscation techniques; the dynamic analysis methods have better universality for packing and obfuscation, but they will cause excessive classification cost. To overcome these shortcomings, in this paper, we propose a classification system Malscore based on the probability scoring and machine learning, which sets the probability threshold to concatenate static analysis (called Phase 1) and dynamic analysis (called Phase 2). The convolutional neural networks with spatial pyramid pooling were used to analyze the grayscale images (static features) in Phase 1, and the variable n-grams and machine learning were used to analyze the native API call sequences (dynamic features) in Phase 2. Malscore combined static analysis with dynamic analysis not only accelerated the static analysis process by taking advantage of the CNN in image recognition but also appeared to be more resilient to obfuscation by the dynamic analysis. Different from other static and dynamic analysis techniques, when malware is detected, due to the fact that malware will most likely be labeled only by static analysis, we could reduce the overheads by dynamically analyzing a few malware that has less obvious features or greater confusion in static analysis. We performed experiments on 174607 malware samples from 63 malware families. The result showed that Malscore achieved 98.82% accuracy for malware classification. Furthermore, Malscore was compared with the method of using static and dynamic analysis. The preprocessing and test time represented a reduction of 59.58% and 61.70%, respectively.

As solar photovoltaic (PV) generation becomes cost-effective, solar power comes into its own as the alternative energy with the potential to make up a larger share of growing energy needs. Consequently, operations and maintenance cost now have a large impact on the profit of managing power modules, and the energy market participants need to estimate the solar power in short or long terms of future. In this paper, we propose a solar power forecasting technique by utilizing convolutional neural networks and long–short-term memory networks recently developed for analyzing time series data in the deep learning communities. Considering that weather information may not be always available for the location where PV modules are installed and sensors are often damaged, we empirically confirm that the proposed method predicts the solar power well with roughly estimated weather data obtained from national weather centers as well as it works robustly without sophisticatedly preprocessed input to remove outliers.