- Research Article
19
- 10.1016/s0165-0270(01)00334-x
Optimal filtering of whole nerve signals
- Mar 01, 2001
- Journal of Neuroscience Methods
- Sašo Jezernik + 1 more +1
Optimal filtering of whole nerve signals
The hypothesis that the visual system detects, under certain conditions, stimulus patterns by means of filters matched to these patterns (Hauske et al. 1976) may be challenged by the argument that other coding mechanisms like spatial frequency channels, Gabor or Hermite filters mimic the behaviour of matched filters, a view supported by the finding of non-linear contrast-interrelationship functions (CIFs), as determined in superposition experiments. In this paper we argue that an overall non-linear CIF does not contradict the hypothesis of detection by a single matched filter: we find that the sensitivity functions determined in our experiments can be separated into two components reflecting (i) a bandpass filter and (ii) a filter characterized by the spectrum of the test-pattern.
Optimal filtering of whole nerve signals
Optimal filtering of whole nerve signals
Monocular blur alters the tuning characteristics of stereopsis for spatial frequency and size
Our sense of depth perception is mediated by spatial filters at different scales in the visual brain; low spatial frequency channels provide the basis for coarse stereopsis, whereas high spatial frequency channels provide for fine stereopsis. It is well established that monocular blurring of vision results in decreased stereoacuity. However, previous studies have used tests that are broadband in their spatial frequency content. It is not yet entirely clear how the processing of stereopsis in different spatial frequency channels is altered in response to binocular input imbalance. Here, we applied a new stereoacuity test based on narrow-band Gabor stimuli. By manipulating the carrier spatial frequency, we were able to reveal the spatial frequency tuning of stereopsis, spanning from coarse to fine, under blurred conditions. Our findings show that increasing monocular blur elevates stereoacuity thresholds ‘selectively’ at high spatial frequencies, gradually shifting the optimum frequency to lower spatial frequencies. Surprisingly, stereopsis for low frequency targets was only mildly affected even with an acuity difference of eight lines on a standard letter chart. Furthermore, we examined the effect of monocular blur on the size tuning function of stereopsis. The clinical implications of these findings are discussed.
Read morePattern and flicker detection analysed by subthreshold summation.
1. We confirm Keesey's (1972) observation that, when a flickering line is viewed, there are distinct thresholds for detecting flicker (or movement) and for detecting a well localized line (pattern detection). Our measurements of the temporal sensitivity of these two mechanisms are similar to Keesey's. 2. The flicker and pattern detection mechanism have been analysed using subthreshold summation, i.e. by observing the effect of subthreshold flickering stimuli (lines and gratings) on the contrast threshold for a flickering test line. 3. The pattern detector shows linear spatial summation of contrast while the flicker detector is non-linear in this respect. 4. The receptive field of the (most sensitive) flicker detector is about two to four times broader than that of the pattern detector. 5. The flicker detector has relatively weak surround inhibition and so, unlike the pattern detector, it is sensitive to a uniform flickering field. 6. The spatial arrangement of the pattern detector is the same at all temporal frequencies (including steady presentation); for flicker detection, the width of the receptive field increases with temporal frequency and the strength of lateral inhibition decreases at high frequencies. 7. Flicker detectors of various widths were demonstrated by using different test stimuli (for 12 Hz modulation); surround ingibition was relatively weak for the broadest detector. 8. There is a delay of surround inhibition of about 3 ms for both flicker and pattern detection. 9. By using a broad test stimulus modulated at a high frequency, a detector can be found with no significant surround inhibition. At threshold, this stimulus produces a sensation of flicker without the appearance of lateral motion observed for finer test lines at lower frequencies. 10. The characteristics of pattern and flicker (movement) detection are compared to electrophysiological studies on X (sustained) and Y (transient) neurones respectively, and correlations are described for studies of temporal frequency response, non-linearity, width of receptive field, strength of the inhibitory surround and motion sensitivity.
Read more<title>Quality classification of wooden surfaces using Gabor filters and genetic feature optimization</title>
We apply a model of texture segmentation using multiple spatially and spectrally localized filters, known as Gabor filters, to the analysis of texture and effect regions found on wooden boards. Specifically we present a method to find an optimal set of parameters for a given 2D object detection method. The method uses banks of Gabor filters to limit the rang of spatial frequencies, where mutually distinct textures differ significantly in their dominant characterizing frequencies. By encoding images into multiple narrow spatial frequency and orientation channels a local classification of texture regions can be achieved. Unlike other methods applying Gabor filters, we do not use a full Gabor transform, but use feature selection techniques to maximize discrimination. The selection method uses a genetic algorithm to optimize various parameters of the system including Gabor weights, and the parameters of morphological pre-processing. We demonstrate the applicability of the method to the task of classifying wooden textures, and report experimental results using the proposed method.
Read moreMindfulness and De-automatization: Effect of Mindfulness-Based Interventions on Emotional Facial Expressions Processing
Past research has suggested that mindfulness training reduces automaticity while processing socio-emotional stimuli. The present study aimed to analyze how mindfulness practice may reduce the use of prior knowledge during the recognition of emotional facial expressions. Based on a predictive brain model, we hypothesized that mindfulness practice would reduce the top-down processing of low spatial frequency information. This experiment compared the performance of a mindfulness group (n = 32) and a waitlist control group (n = 30) in an emotional Stroop task before and after an 8-week training course. The emotional Stroop task comprised two emotional facial expressions (joy or anger) topped with a congruent or incongruent word, and was primed by facial expressions filtered in two spatial frequency bands: high spatial frequency (HSF) or low spatial frequency (LSF). Having measured the reaction time, the results showed a significant interaction between group (mindfulness vs. control) and session (before vs. after training; p = 0.04; R2 = 0.001), irrespective of spatial frequency channels. Breaking down the interaction showed that mindfulness-trained participants responded significantly faster than the controls to any type of information. The interaction Group by Session by Priming was not significant. These results are in line with research underlining the effects of mindfulness-based interventions on global attentional control. More precisely, the global reduced reaction time did not support lower top-down predictive coding abilities specifically driven by low spatial frequency channels, but indicated a better general sensitivity to the perceptual environment.
Read moreTexture contours can facilitate stereopsis by initiating vergence eye movement.
Monitoring the proper operation of heat-supply systems and indoor heating-ventilating systems is discussed. Also discussed is how to monitor the efficiency of fuel and electricity use. The recommendations of Energomashremnaladka PTP (Technical Aid Station) are given.
Read morePerception of differences in naturalistic dynamic scenes, and a V1-based model.
We investigate whether a computational model of V1 can predict how observers rate perceptual differences between paired movie clips of natural scenes. Observers viewed 198 pairs of movies clips, rating how different the two clips appeared to them on a magnitude scale. Sixty-six of the movie pairs were naturalistic and those remaining were low-pass or high-pass spatially filtered versions of those originals. We examined three ways of comparing a movie pair. The Spatial Model compared corresponding frames between each movie pairwise, combining those differences using Minkowski summation. The Temporal Model compared successive frames within each movie, summed those differences for each movie, and then compared the overall differences between the paired movies. The Ordered-Temporal Model combined elements from both models, and yielded the single strongest predictions of observers' ratings. We modeled naturalistic sustained and transient impulse functions and compared frames directly with no temporal filtering. Overall, modeling naturalistic temporal filtering improved the models' performance; in particular, the predictions of the ratings for low-pass spatially filtered movies were much improved by employing a transient impulse function. The correlations between model predictions and observers' ratings rose from 0.507 without temporal filtering to 0.759 (p = 0.01%) when realistic impulses were included. The sustained impulse function and the Spatial Model carried more weight in ratings for normal and high-pass movies, whereas the transient impulse function with the Ordered-Temporal Model was most important for spatially low-pass movies. This is consistent with models in which high spatial frequency channels with sustained responses primarily code for spatial details in movies, while low spatial frequency channels with transient responses code for dynamic events.
Read moreLow spatial frequency channels are more useful than high spatial frequency channels in classifying face emotional expressions, simulation of fMRI data
Vuilleumier, Armony, Driver & Dolan (2003) have shown that amygdala responses to fearful expressions seem to be more activated by intact or low spatial frequency (LSF) faces than high spatial frequency (HSF) faces. The fMRI results suggest that LSF components processed by the magnocellular layers of the lateral geniculate nucleus (LGN) might be conveyed by a subcortical pathway activating the pulvinar, superior colliculus and finally the amygdala. This subcortical pathway was assumed to bypass the striate cortex in order to process LSF components faster than HSF components of visual stimuli. The purpose of the present study is to test the usefulness of LSF information as compared to HSF information and to original stimuli in a visual classification task performed by an artificial neural network. This model links a computational model of visual perception and a back-propagation classifier. The basic idea is i) to compress visual information by means of a perceptual model of vision and ii) to provide a distributed model of cognition with the above mentioned visual inputs. The results show that visual information conveyed by LSF faces, which is processed very fast by the human perceptual system, allows a distributed neural system to correctly categorize fearful or neutral faces. This is not the case for HSF components. These results suggest that high-speed connections from the magnocellular layers to the amygdala might be a fast and efficient way to perform classification of human faces with respect to their emotional expressions.
Read moreBandwidth measurement technique for spatial frequency channels in human visual system
to determine the number of measurements required to obtain stable bandwidth values for spatial frequency channels (SFCs) in the human visual system. Ten untrained, normal vision subjects 18-22 years old were presented with light pulses (flickers) with initial frequency of 10 Hz and then with a higher-than-initial and lower-than-initial frequency alternately at 1-sec intervals. The difference between flickers frequencies was gradually increased until the test subject determined his/her discrimination threshold. This threshold was assumed to represent the SFC bandwidth. Measured values were plotted on a coordinate system «SFC bandwidth - the number of measurement». The described procedure was repeated and a graph resulted showing SFC bandwidth as a function of Ni, where Ni is the number of i-th measurement and i = 1, 2, ..., k (k - the sequence number of measurement at which the transition process was completed and a quasi-stationary state achieved): ΔF=f(Ni). The number of measurements required to obtain stable SFC bandwidth values was determined from the number of measurements made during the transition process. It has been found that to obtain stable bandwidth values for SFCs of the human visual system, 2 to 8 measurements are required (point estimate of the median for the given sample equaled 5). The duration of a transition process to stable SFC bandwidth values is individual and this should be taken into account when assessing the visual system.
Read moreSpatial frequency phase effects in human vision
Spatial frequency phase effects in human vision
Metacontrast masking within and between visual channels: Effects of orientation and spatial frequency contrasts
We measured the strength and optimal target-mask onset asynchrony (SOA(max)) of metacontrast masking using Gabor patches as targets and sinusoidal rings with Gaussian envelopes as masks. We varied spatial frequencies (f) between 0.5 and 8 cpd to manipulate the degree to which spatial frequency channels in the visual system are triggered. By varying spatial frequencies as well as spatial frequency contrast (Δf) between target and mask, we measured the properties of inter- as well as intra-channel inhibition. We found that an increase of the mask's spatial frequency decreased its effectiveness but did not change its SOA(max). When orientation contrast was introduced between targets and masks with the same spatial frequency, SOA(max) increased with orientation contrast. An effect of orientation contrast was not observed with low spatial frequency-on-high spatial frequency masking, indicating that orientation selectivity is a unique feature of within-channel masking. Spatial frequency contrast affects SOA(max) and effectiveness in an asymmetric fashion: low-on-high masking is strong and yields a longer SOA(max), compared to low-on-low and high-on-high masking; high-on-low masking is ineffective.
Read moreRelative saliency in change signals affects perceptual comparison and decision processes in change detection.
Change detection requires perceptual comparison and decision processes on different features of multiattribute objects. How relative salience between two feature-changes influences the processes has not been addressed. This study used the systems factorial technology to investigate the processes when detecting changes in a Gabor patch with visual inputs from orientation and spatial frequency channels. Two feature-changes were equally salient in Experiment 1, but a frequency-change was more salient than an orientation-change in Experiment 2. Results showed that all four observers adopted parallel self-terminating processing with limited- to unlimited-capacity processing in Experiment 1. In Experiment 2, one observer used parallel self-terminating processing with unlimited-capacity processing, and the others adopted serial self-terminating processing with limited- to unlimited-capacity processing to detect changes. Postexperimental interview revealed that subjective utility of feature information underlay the adoption of a decision strategy. These results highlight that observers alter decision strategies in change detection depending on the relative saliency in change signals, with relative saliency being determined by both physical salience and subjective weight of feature information. When relative salience exists, individual differences in the process characteristics emerge.
Read moreElevation of Vernier thresholds during image motion depends on target configuration.
Previously we showed that thresholds for abutting Vernier targets are unaffected by motion, as long as the targets are processed by the same spatial-frequency channel at each velocity and remain equally detectable [Invest. Ophthalmol. Visual Sci. (Suppl.) 37, S734 (1996)]. In this study we compared Vernier thresholds for stationary and moving abutting and nonabutting targets (gaps = 0, 18, and 36 arc min) for velocities of 0-16 deg/s. The Vernier targets were spatially filtered vertical lines (peak spatial frequency = 3.3 or 6.6 c/deg), presented at contrast levels of two, four, and eight times the detection threshold of each component line. Unlike the results for abutting targets, Vernier thresholds for nonabutting targets worsen with velocity as well as gap size. The results for abutting Vernier targets are consistent with the hypothesis that thresholds are mediated by oriented spatial filters, whose responses increase proportionally with the stimulus contrast. The velocity-dependent thresholds found for nonabutting Vernier targets can be explained on the basis of local-sign comparisons if the comparison process is assumed to include a small amount of temporal noise.
Read moreHigh data rate spread spectrum demodulators using low-loss SAW matched filters
Compared with the SAW convolver and the digital correlator, the SAW matched filter (tapped delay line) has many advantages in commercial wireless LAN applications, because of its high efficiency and simple configuration. A new type of SAW device for the spread spectrum (SS) transceiver and a low-loss SAW matched filter for the wireless LAN system is described. Two matched filters which correspond to bi-phase data modulation and bandpass filters for the intermediate frequency (IF) section are combined into one device. This SAW matched filter fabricated on ST cut quartz has been practically used in commercial wireless LAN systems and has good temperature stability. To reduce the conversion loss further we have developed an extremely low loss SAW matched filter. The output correlation peak of the matched filter is 3 dB larger than the input level at a 50 /spl Omega/ input and output impedance. This low loss SAW matched filter is fabricated on 128/spl deg/ Y-X LiNbO/sub 3/ substrate and consists of unidirectional transducers. The phase error caused by the temperature coefficient of delay is compensated by using a temperature dependent change of local frequency in the spread spectrum receiver. Under the critical conditions of a 2.4 GHz wireless LAN (data rate is 1.4 Mbps, C/N>2 dB, that is E/sub b//N/sub 0/>13.6 dB, and operation temperature is from -20/spl deg/C to +60/spl deg/C), good performance is achieved with less than a 10/sup -5/ bit error rate.
Read morePerception of temporal acoustic patterns by the goldfish ( Carassius auratus)
Perception of temporal acoustic patterns by the goldfish ( Carassius auratus)