Development and experiments of a novel multifunctional underwater microrobot

Underwater microrobots are in urgent demand for applications such as pollution detection and video mapping in limited space. Compact structure, multi-functionality, flexibility, and position precision are normally considered incompatible characteristics for underwater microrobots. To accomplish our objectives, we developed several novel bio-inspired biomimetic locomotions with ionic polymer metal composite (IPMC) actuators. IPMC actuator could implement a fast response and high bending deformation, which could be used as artificial muscles to propel robots backwards and forwards with a compact structure. To implement the position precision of IPMC actuator, we proposed an electromechanical model and analyzed the deformation and actuating force of the IPMC equivalent cantilever beam, which were used for the biomimetic locomotion. Then a conventional PID controller for IPMC actuators was designed from the identified model. Based on the IPMC equivalent cantilever beam model, we developed several kinds of underwater microrobots with the compact structure, multi-functionality, flexibility, and position precision.

A new method to fabricate ionic polymer metal composite (IPMC) actuators with a 3-dimensional preshaped form by a simple thermal treatment process is demonstrated. The effects of the thermal treatment process on the properties of the actuator are analyzed and the characteristics of the actuator, such as stiffness, displacement and resonance, generating force, and repeated motions, are compared with those of unheated IPMC actuators. The experimental results show that thermal-treated IPMC actuators have improved generating force as well as preshaping of the 3-dimensional form.

Identification of an ionic polymer metal composite actuator employing Preisach type fuzzy NARX model and Particle Swarm Optimization

Mechanics and electrochemistry of ionic polymer metal composites

For the first time, the ionic polymer metal composite (IPMC) actuator is integrated with a radio frequency identification (RFID) tag antenna for achieving frequency reconfiguration in the ultrahigh-frequency (UHF) band. Here, the IPMC movable flap serves as an actuator that can effectively tune the tag resonant frequency. By applying a two-layer-crenelated structure and employing a surface patterned electrode for restraining back relaxation, the deflection of the IPMC actuator can be significantly improved. The IPMC actuator can move in two directions, enabling two-degree frequency tuning. Numerical and experimental data confirm that the tip displacement of the IPMC actuator can be enhanced up to 266% with the use of the two-layer-crenelated structure. The IPMC actuator allows the resonant frequency of the tag antenna to be tuned back by as much as 35 MHz, after deviating due to placing on an unintended object. UHF RFID application is also performed using a portable commercial RFID reader. Good frequency reconfiguration and broad tuning range, along with far read distances, have been achieved with our tunable UHF RFID tag antenna.

The ionic polymer metal composite (IPMC) actuator is one of the most promising smart actuators that possesses unique advantages and is suitable for underwater applications. However, there are challenges to employ it directly in such applications for precise tracking. The IPMC suffers from high nonlinearity due to the existence of inherent creep and hysteresis phenomena. Furthermore, the IPMC actuator is always subject to uncertainty and external disturbance due to the working environment. Therefore, to cope with the aforementioned restrictions and to make the IPMC applicable for real-life applications, designing a high-accuracy tracking control technique is an urgent demand. In this article, a new integral nonlinear hyperplane-based sliding mode controller is dedicated for an underwater IPMC actuator. The proposed controller employs an adaptive tuning law in the discontinuous part to overcome any prerequisite for knowing the upper bound of the model uncertainty and external disturbance. Extensive experiments have been carried out to verify practical effectiveness of the proposed controller in comparison with conventional nonsingular terminal sliding mode in terms of fast convergence, accurate tracking, and the robust performance.

Predicting of electro-mechanical behavior of ionic polymer metal composites (IPMCs) is important in many actuator design applications, but a general model for such predictions has not been successfully developed yet. A simple but versatile modeling method based on the concentrated ion boundary layer model was developed to advance the modeling of the bending behavior of IPMCs of different sizes. IPMC beams with different thicknesses and sizes were fabricated by stacking and hot-pressing method, and their mechanical bending characteristics were measured. Finite element analysis of the beams was performed using a concentrated ion boundary layer model that uses a thermal analogy. The calculated deformation and tip blocking force agreed well with the measured values for specimens of different sizes. This study shows that the proposed modeling method is simple but general enough to simulate the deformation characteristics of IPMC actuators of various sizes.

A variety of microrobots have commonly been used in the fields of biomedical engineering and underwater operations during the last few years. Due to their compact structure, low driving power, and simple control systems, microrobots can complete a variety of underwater monitoring operations, even in restricted underwater environments. Generally speaking, compact structure, multi-functionality, flexibility and precise positioning are considered incompatible characteristics for underwater microrobots. Nevertheless, we have designed several novel types of bio-inspired locomotion, using ionic polymer metal composite (IPMC) and shape memory alloy (SMA) actuators. We reviewed a number of previously developed underwater microrobot prototypes that were constructed to demonstrate the feasibility of these types of biomimetic locomotion. Based on these prototypes, we summarized the implemented techniques and available results for efficient and precise underwater locomotion. In order to combine compact structure, multi-functionality, flexibility and precise positioning, we constructed a prototype of a new lobster-like microrobot and carried out a series of experiments to evaluate its walking, rotating, floating and grasping motions. Diving/surfacing experiments were performed by electrolyzing the water around the surfaces of the actuators. Three proximity sensors were installed on the microrobot to detect an object or avoid an obstacle while walking.

In the present paper, equivalent beam and equivalent bimorph beam models for IPMC(ionic Polymer-Metal Composite) actuators are described. Physical properties of an IPMC, such as Young's modulus and electro-mechanical coupling coefficient. are determined from the rule of mixture, bimorph beam equations, and measured force-displacement data of a cantilevered IPMC actuator. By using a beam equation with estimated physical properties, actuation displacements of a cantilevered IPMC actuator was calculated and a good agreement between the computed tip displacements and the measured data was observed. Finite element analysis(FEA) combined with the estimated physical properties was used to reproduce the force-displacement relationship of an IPMC actuator. Results from the FEA agreed well with the measure data. The proposed models might be used for modeling of IPMC actuators with complicated shapes and boundary conditions.

In this paper, model-based precision force and position control of an ionic polymer metal composite (IPMC) is presented. A 23.8 mm × 3.4 mm × 0.16 mm IPMC strip was used as an actuator in a cantilever configuration. Open-loop force and position responses of an IPMC are not repeatable, and hence closed-loop precision control is of critical importance to ensure proper functioning, repeat-ability and reliability. After feedback controllers were designed and implemented with empirically obtained fourth-order plant transfer functions, the overshoot decreased from 460 to 2.8 per cent and the settling time was reduced from 37.5 to 3.22 s in force control. In position control the overshoot decreased from 333 to 20.3 per cent and the settling time was reduced from 21.5 to 2.56 s. Microscale precision force and position control capabilities of the IPMC actuator were also demonstrated experimentally. An 8 μN force resolution was achieved with a force noise of 0.5μN r.m.s., and the position resolution was 6 μm with a position noise of 2.5 μm r.m.s. The maximum force and tip displacement achieved with the IPMC actuator under closed-loop control were 2 mN and 5 mm respectively. The IPMC actuator could follow various commanded force and position trajectories such as sinusoidal and trapezoidal position profiles, and a velocity profile with a 3 mm/s maximum velocity. A novel hybrid force and position control strategy demonstrated its utility in practical micromanipulalion applications where the actuator force must be limited to prevent damaging micro-objects. High-precision control of the IPMC at low force level proved its potential for micromanufacturing and micromanipulation applications such as robotic and biomedical microgrippers.

This paper reports a microreservior-based drug delivery device that is activated by ionic polymer metal composite (IPMC) actuator. The actuator is fabricated with Nafion 117 membrane and plated with silver layer electrodes. To fit with biocompatible properties, the device body, including the drug reservoir, was constructed using polydimethylsiloxane (PDMS) material. Experimental measurement of the fabricated IPMC actuator shows a maximum deflection displacement of 0.076 ~ 0.077 mm at two consecutive actuation cycles. To study the concentration of the drug released from the developed device, fluorescent dye was loaded in the reservoir and the released intensity was measured using well plate reader. An increase of the fluorescent intensity shows that IPMC actuator successfully unseals the microreservoir and achieves the targeted application.

This paper presents dynamic modeling of an innovative contractible ionic polymer-metal composites (IPMC) actuator with a helical configuration. The helical shaped IPMC actuator is fabricated through the thermal treatment of an IPMC strip, which is helically coiled on a glass rod. This type of a soft actuator can be used to realize not only bending motion but also torsional and longitudinal motion. For the first time, an explicit analytical expression is developed for the computation of mode shapes and dynamic responses of a helical IPMC actuator based on the intrinsic equations of the naturally curved and twisted beam. The numerical transfer-matrix method is used to solve the systems of 12 linear ordinary differential equations with boundary conditions. In particular, the effect of the structural parameters on the performance of the helical IPMC actuator is evaluated, using experimental results and an analytical model. The validation of the proposed model is achieved through comparison with computational results using a commercial finite-element (FE) program as well as experimental results. The present experimental and theoretical results show that diameter, among the structural parameters, plays an important role in the actuation performance of a helical IPMC actuator. The proposed modeling is general and can also be used in solving other cylindrical or noncylindrical helical IPMC actuators with different cross-sectional shapes as well as various end conditions.

Bio-inspiration focuses on translating the evolutionary successes of natural species into engineering systems that mimic the geometry, function, and performance of the natural system. In this paper we present a latest comprehensive review of ionic polymer metal composite (IPMC) biomedical and biomimetic applications. IPMC is becoming an increasingly popular material among scholars, engineers and scientists due to its inherent properties of low activation voltage, large bending strain, flexibility, softness, suitable response time which make them a strong candidate to be applied as artificial muscle in biomimetic land and underwater applications. Among the diversity of electro active polymers (EAPs), recently developed IPMCs are good candidates for use in bio-related application because of their biocompatibility. Several recently reported IPMC biomimetic applications have been reported in this paper. The applications of IPMC have been growing due to progression in its manufacturing techniques, development of more accurate response models and control techniques, and recently more sophisticated IPMC actuator applications have been performed. This indicates that the IPMC actuators hold potential for more sophisticated and controlled applications in fields of biomedical and biomimetic. Extensive references are provided for more indepth explanation.

In this work, flapping wings actuated by IPMCs are designed and simulated to mimick birds wing. In order for the wing to generate lift and thrust during flapping motion, the wing must be able to flap and twist at the same time. For design of such wings, shape of the IPMC actuator need to be designed such that the actuator can create bending and twisting motions during wing strokes. To determine the shape of the IPMC actuator, an equivalent bimorph beam model has been proposed based on the measured force-displacement data of an IPMC. The equivalent model and thermal analogy are used for numerical simulation of IPMC actuated wings to determine suitable shape of the IPMC actuator. In this way, we could select a best performing wing that can create the largest twist motion during flapping of the wing.

The control of a flexible beam using ionic polymer metal composites (IPMCs) is investigated in this paper. The mechanical flexible dynamics are modelled as a Timoshenko beam. The electric dynamics of the IPMCs are considered in the model. The port-Hamiltonian framework is used to propose an interconnected control model of the mechanical flexible beam and IPMC actuator. Furthermore, a passive and Hamiltonian structure-preserving linear quadratic Gaussian (LQG) controller is used to achieve the desired configuration of the system, and the asymptotic stability of the closed-loop system is shown using damping injection. An experimental setup is built using a flexible beam actuated by two IPMC patches to validate the proposed model and show the performance of the proposed control law.