• Home
  • Search
  • Diffusion Behavior and Fracture Mechanism at Solid-Liquid Interface of Polycrystalline Al/Mg Bimetallic System: A Molecular Dynamics Simulation.
  • https://doi.org/10.3390/ma19050836Copy DOI Icon

Diffusion Behavior and Fracture Mechanism at Solid-Liquid Interface of Polycrystalline Al/Mg Bimetallic System: A Molecular Dynamics Simulation.

Show More
  • Abstract
  • Literature Map
  • Similar Papers
Abstract

Al/Mg bimetallic composites have drawn considerable attention for their promising lightweight applications in sectors such as the aerospace and automotive industries. In these systems, the interfacial behavior critically governs the overall performance and reliability. In this research, the molecular dynamics (MD) simulation was employed to systematically study the effects of pouring temperatures (923 K, 973 K, and 1023 K) and preheating temperatures (373 K, 473 K, and 573 K) on the interfacial diffusion behavior and fracture mechanism of the polycrystalline Al/Mg bimetallic system. The results indicate that the influencing rule of pouring temperatures and preheating temperatures on the interfacial diffusion behavior is consistent. Specifically, the diffusion coefficient of Mg atoms is higher than that of Al atoms, while the diffusion distance of Al atoms is significantly greater than that of Mg atoms. As the temperature increases, the thickness of the interfacial transition layer correspondingly rises. However, the effects of these two parameters on tensile fracture behavior demonstrate notable discrepancies. Specifically, the fracture mode evolves with pouring temperature, transitioning from being mediated solely by dislocations to being co-mediated by twins and dislocations. In contrast, the fracture mechanism remains solely dislocation-controlled, regardless of the preheating temperature. In addition, all the models fractured at the interface between the diffusion layer and the Mg matrix. The optimal tensile strength of 1.850 GPa was achieved at a pouring temperature of 923 K and a preheating temperature of 473 K, representing an improvement of approximately 52% compared to the lowest value recorded in the study. This research offers significant theoretical insights for the rational optimization of preparation parameters and an in-depth understanding of fracture mechanisms in Al/Mg bimetallic systems.

Similar Papers
  • Research Article
  • Citations4

Interfacial behavior and diffusion mechanisms of BNi-2 brazing on titanium alloy: experimental and molecular dynamics insights.

  • Jun 28, 2025
  • Journal of molecular modeling
  • Tansu Göynük +2
  • PDF
  • Research Article
  • Citations4

Initial Response of Pentaerythritol Tetranitrate (PETN) under the Coupling Effect of Preheating, Shock and Defect via the Molecular Dynamics Simulations with the Multiscale Shock Technique Method

  • Mar 24, 2023
  • Molecules
  • Yaping Zhang +2
  • Research Article
  • Citations10

Investigation on controlling the process parameters for improving the quality of investment cast parts

  • May 30, 2018
  • Journal of the Brazilian Society of Mechanical Sciences and Engineering
  • Sarojrani Pattnaik
  • Research Article
  • Citations36

Interfacial adhesive behaviors between SBS modified bitumen and aggregate using molecular dynamics simulation

  • Jul 28, 2022
  • Surfaces and Interfaces
  • Xiaoguang Yao +2
  • Research Article
  • Citations13

TEM analysis and molecular dynamics simulation of graphene coated Al-Cu micro joints

  • Oct 01, 2022
  • Carbon Trends
  • Omkar Mypati +3
  • Research Article
  • Citations4

The influence of hydrogen content on the Zr-4 alloy diffusion bonding joint: From experiments to molecular dynamics simulations

  • Jun 13, 2024
  • Materials Today Communications
  • Yao Wang +5
  • Research Article
  • Citations18

Investigation of atomic diffusion behavior of Mo/Au interface

  • Sep 18, 2020
  • Materials Chemistry and Physics
  • Kang Wang +5
  • Research Article
  • Citations41

Molecular dynamics simulation and experimental validation on the interfacial diffusion behaviors of rejuvenators in aged bitumen

  • Jan 11, 2023
  • Materials & Design
  • Shisong Ren +6
  • Research Article
  • Citations149

Direct extraction of rate-dependent traction–separation laws for polyurea/steel interfaces

  • Aug 28, 2008
  • International Journal of Solids and Structures
  • Yong Zhu +2
  • Research Article
  • Citations22

Diffusion, Trapping, and Dissociation Behaviours of Helium at the Σ5 Grain Boundary in Tungsten: A Molecular Dynamics Study

  • Oct 17, 2020
  • Journal of Nuclear Materials
  • Baoqin Fu +4
  • Research Article
  • Citations24

Interfacial Bonding Behavior between Silver Nanoparticles and Gold Substrate Using Molecular Dynamics Simulation

  • Jan 01, 2012
  • MATERIALS TRANSACTIONS
  • Tomo Ogura +4
  • Research Article
  • Citations157

Asphaltene Subfractions Responsible for Stabilizing Water-in-Crude Oil Emulsions. Part 2: Molecular Representations and Molecular Dynamics Simulations

  • Aug 11, 2015
  • Energy & Fuels
  • Fan Yang +8
  • PDF
  • Research Article
  • Citations4

Effect of VaryingStiffness and Functionalizationon the Interfacial Failure Behavior of Isotactic Polypropylene onHydroxylated γ-Al2O3 by MD Simulation

  • Jan 20, 2023
  • ACS Applied Materials & Interfaces
  • Yoshitake Suganuma +1
  • Research Article
  • Citations33

Computational Investigation of Antifouling Property of Polyacrylamide Brushes.

  • Mar 02, 2020
  • Langmuir
  • Yonglan Liu +7
  • Research Article
  • Citations56

Influence of surface-modified glass fibers on interfacial properties of GF/PEEK composites using molecular dynamics

  • Dec 25, 2020
  • Computational Materials Science
  • Lei Pan +5
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.