Direct Optimal Vibration Control of a Piezoelastic Plate

1 A Survey on Computational Optimal Control.- Issues in the Direct Transcription of Optimal Control Problems to Sparse Nonlinear Programs.- Optimization in Control of Robots.- Large-scale SQP Methods and their Application in Trajectory Optimization.- Solving Optimal Control and Pursuit-Evasion Game Problems of High Complexity.- 2 Theoretical Aspects of Optimal Control and Nonlinear Programming.- Continuation Methods In Boundary Value Problems.- Second Order Optimality Conditions for Singular Extremals.- Synthesis of Adaptive Optimal Controls for Linear Dynamic Systems.- Control Applications of Reduced SQP Methods.- Time Optimal Control of Mechanical Systems.- 3 Algorithms for Optimal Control Calculations.- Second Order Algorithm for Time Optimal Control of a Linear System.- An SQP-type Solution Method for Constrained Discrete-Time Optimal Control Problems.- Numerical Methods for Solving Differential Games, Prospective Applications to Technical Problems.- Construction of the Optimal Feedback Controller for Constrained Optimal Control Problems with Unknown Disturbances.- Repetitive Optimization for Predictive Control of Dynamic Systems under Uncertainty.- Optimal Control of Multistage Systems Described by High-Index Differential-Algebraic Equations.- A New Class of a High Order Interior Point Method for the Solution of Convex Semiinfinite Optimization Problems.- A Structured Interior Point SQP Method for Nonlinear Optimal Control Problems.- 4 Software for Optimal Control Calculations.- Automated Approach for Optimizing Dynamic Systems.- ANDECS: A Computation Environment for Control Applications of Optimization.- Application of Automatic Differentiation to Optimal Control Problems.- OCCAL: A mixed symbolic-numeric Optimal Control CALculator.- 5 Applications of Optimal Control.- A Robotic Satellite with Simplified Design.- Nonlinear Control under Constraints of a Biological System.- An Object-Oriented Approach to Optimally Describe and Specify a SCADA System Applied to a Power Network.- Near-Optimal Flight Trajectories Generated by Neural Networks.- Performance of a Feedback Method with Respect to Changes in the Air-Density during the Ascent of a Two-Stage-To-Orbit Vehicle.- Linear Optimal Control for Reentry Flight.- Steady-State Modelling of Turbine Engine with Controllers.- Shortest Paths for Satellite Mounted Robot Manipulators.- Optimal Control of the Industrial Robot Manutec r3.

In this paper, we study the optimal control problem for Takagi–Sugeno (T-S) fuzzy systems with disturbances. Due to the presence of disturbances in the T-S fuzzy systems, a fuzzy optimal state feedback control approach is presented by employing a two-player zero-sum game. Since the analytical optimal control solutions and the worst-case disturbance policies of T-S fuzzy systems can be boiled down to solving the algebraic Riccati equations (AREs), which are difficult to be obtained directly, a model-free policy iteration (PI) learning algorithm is proposed to obtain their approximation solutions. It is proved that the developed fuzzy optimal state feedback controller can ensure the fuzzy systems to be asymptotically stable and satisfy the disturbance attenuation condition simultaneously. Also, the designed PI learning algorithm can converge to their optimal solutions. Finally, we apply the developed fuzzy optimal state feedback control method to the truck-trailer system and the simulation results demonstrated the effectiveness of the developed scheme.

SummaryThis paper proposes an optimal control method of an unmanned aerial helicopter (UAH) with unknown disturbances. Solving the Hamilton‐Jacobi‐Bellman (HJB) equation is considered as the common approach to design an optimal controller under a meaningful cost function when facing the nonlinear optimal control problem. However, the HJB equation is hard to solve even for a simple problem. The inverse optimal control method that avoids the difficulties of solving the HJB equation has been adopted. In this inverse optimal control approach, a stabilizing optimal control law and a particular cost function that are obtained by a control Lyapunov function are required. An integrator backstepping method is used in designing the optimal control law of the UAH. Furthermore, a disturbance‐observer–based control (DOBC) approach has been adopted in the optimal control law for dealing with the unknown disturbances of the UAH system. Simulation results have been given to certify the stability of the nonlinear UAH system and the validity of this developed control method.

Bellman’s discrete dynamic programming is one of the most general approaches to solve optimal control problems. For discrete-time dynamical systems, it is, at least theoretically, capable to determine globally optimal control laws. In most practical cases, both state and control variables are subject to constraints. Due to the necessity for gridding of the range of both state and control variables in numerical implementations of dynamic programming, the computational effort grows exponentially with increasing system dimensions. This fact is well known as the curse of dimensionality. Furthermore, gridding of intervals representing uncertain system parameters is inevitable, if dynamic programming is used for the design of optimal controllers for systems with uncertainties. In this contribution, an interval arithmetic procedure for the design of optimal and robust controllers is presented. This procedure relies on the basic concepts of dynamic programming. Sophisticated techniques for the exclusion of non-optimal control strategies significantly reduce the computational burden. Since interval techniques can be applied to both continuous-time and discrete-time dynamical systems, the interval arithmetic optimization approach presented in this chapter is applicable to both cases. In addition, the inclusion of effects of uncertain parameters in the underlying optimality criteria is demonstrated. For that purpose, interval arithmetic routines for analysis and design of optimal and robust controllers have been developed. Details about computationally efficient implementations of interval arithmetic optimization procedures and numerical results for a mechanical positioning system with statedependent switchings between different dynamical models for viscous and Coulomb friction are summarized.

In this paper, the problem of the robust optimal control (ROC) for a class of nonlinear systems with uncertainties and external disturbances is studied. For this purpose, the State Dependent Riccati Equation (SDRE) is considered as a solution of the ROC. The proposed method is to transform a robust control problem into an optimal control problem, where the uncertainties and disturbances are reflected in the performance index. Hence, the performance index is selected as an energy function and using the proposed constraints in this paper the Lyapunov stability for this class of nonlinear systems is proved and the robust optimal controller is designed. In order to illustrate the high capability of the ROC method in optimal control of complex systems such as Hyper-chaotic system, the time response of state variables in the proposed method and the Global Robust Optimal Sliding Mode Control (GROSMC) method are compared together. The simulation results show that the time response of state variables in the ROC method is more sufficient than the GROSMC method.

In this paper, we present a global optimal and stable fuzzy controller design method for both continuous- and discrete-time fuzzy systems under both finite and infinite horizons. First, a sufficient condition is proposed which indicates that the global optimal effect can be achieved by the fuzzily combined local optimal controllers. Based on this sufficient condition, we derive a local concept approach to designing the optimal fuzzy controller by applying traditional linear optimal control theory. The stability of the entire closed-loop continuous fuzzy system can be ensured by the designed optimal fuzzy controller. The optimal feedback continuous fuzzy system can not only be guaranteed to be exponentially stable, but also be stabilized to any desired degree. Also, the total energy of system output is absolutely finite. Moreover, the resultant feedback continuous fuzzy system possesses an infinite gain margin; that is, its stability is guaranteed no matter how large the feedback gain becomes. Two examples are given to illustrate the proposed optimal fuzzy controller design approach and to demonstrate the proved stability properties.

In this paper, we present an optimal control approach using Linear Matrix Inequalities (LMIs) for trajectory tracking control of a three-wheeled omnidirectional mobile robot in the presence of external disturbances on the robot's actuators and noise in the robot's sensor measurements. First, a state-space representation of the omnidirectional robot dynamics is derived using a point-mass dynamic model. Then, we propose an LMI-based full-state feedback H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller for the tracking problem. The robot's tracking performance with the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller is compared to its performance with a classical full-state feedback tracking controller in simulations with circular and bowtie-shaped reference trajectories. In order to evaluate our proposed controller in practice, we also implement the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal and classical controllers for these reference trajectories on a three-wheeled omnidirectional robot. The H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller guarantees stabilization of the robot motion and attenuates the effects of frictional disturbances and measurement noise on the robot's tracking performance. Using the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller, the robot is able to track the reference trajectories with up to a 47.8% and 45.8% decrease in the maximum pose and twist errors, respectively, over a full cycle of the trajectory compared to the classical controller. The simulation and experimental results show that our LMI-based H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller is robust to undesired effects of disturbances and noise on the dynamic behavior of the robot during trajectory tracking and can outperform the classical controller in attenuating their effects.

In this study, a finite‐time online optimal controller was designed for a nonlinear wheeled mobile robotic system (WMRS) with inequality constraints, based on reinforcement learning (RL) neural networks. In addition, an extended cost function, obtained by introducing a penalty function to the original long‐time cost function, was proposed to deal with the optimal control problem of the system with inequality constraints. A novel Hamilton‐Jacobi‐Bellman (HJB) equation containing the constraint conditions was defined to determine the optimal control input. Furthermore, two neural networks (NNs), a critic and an actor NN, were established to approximate the extended cost function and the optimal control input, respectively. The adaptation laws of the critic and actor NN were obtained with the gradient descent method. The semi‐global practical finite‐time stability (SGPFS) was proved using Lyapunov's stability theory. The tracking error converges to a small region near zero within the constraints in a finite period. Finally, the effectiveness of the proposed optimal controller was verified by a simulation based on a practical wheeled mobile robot model.

The centralized paradigm of a single controller and a single plant upon which modern control theory is built is no longer applicable to modern cyber-physical systems of interest, such as the power-grid, software defined networks or automated highways systems, as these are all large-scale and spatially distributed. Both the scale and the distributed nature of these systems has motivated the decentralization of control schemes into local sub-controllers that measure, exchange and act on locally available subsets of the globally available system information. This decentralization of control logic leads to different decision makers acting on asymmetric information sets, introduces the need for coordination between them, and perhaps not surprisingly makes the resulting optimal control problem much harder to solve. In fact, shortly after such questions were posed, it was realized that seemingly simple decentralized optimal control problems are computationally intractable to solve, with the Wistenhausen counterexample being a famous instance of this phenomenon. Spurred on by this perhaps discouraging result, a concerted 40 year effort to identify tractable classes of distributed optimal control problems culminated in the notion of quadratic invariance, which loosely states that if sub-controllers can exchange information with each other at least as quickly as the effect of their control actions propagates through the plant, then the resulting distributed optimal control problem admits a convex formulation. The identification of quadratic invariance as an appropriate means of convexifying distributed optimal control problems led to a renewed enthusiasm in the controller synthesis community, resulting in a rich set of results over the past decade. The contributions of this thesis can be seen as being a part of this broader family of results, with a particular focus on closing the gap between theory and practice by relaxing or removing assumptions made in the traditional distributed optimal control framework. Our contributions are to the foundational theory of distributed optimal control, and fall under three broad categories, namely controller synthesis, architecture design and system identification. We begin by providing two novel controller synthesis algorithms. The first is a solution to the distributed H∞ optimal control problem subject to delay constraints, and provides the only known exact characterization of delay-constrained distributed controllers satisfying an H∞ norm bound. The second is an explicit dynamic programming solution to a two player LQR state-feedback problem with varying delays. Accommodating varying delays represents an important first step in combining distributed optimal control theory with the area of Networked Control Systems that considers lossy channels in the feedback loop. Our next set of results are concerned with controller architecture design. When designing controllers for large-scale systems, the architectural aspects of the controller such as the placement of actuators, sensors, and the communication links between them can no longer be taken as given -- indeed the task of designing this architecture is now as important as the design of the control laws themselves. To address this task, we formulate the Regularization for Design (RFD) framework, which is a unifying computationally tractable approach, based on the model matching framework and atomic norm regularization, for the simultaneous co-design of a structured optimal controller and the architecture needed to implement it. Our final result is a contribution to distributed system identification. Traditional system identification techniques such as subspace identification are not computationally scalable, and destroy rather than leverage any a priori information about the system's interconnection structure. We argue that in the context of system identification, an essential building block of any scalable algorithm is the ability to estimate local dynamics within a large interconnected system. To that end we propose a promising heuristic for identifying the dynamics of a subsystem that is still connected to a large system. We exploit the fact that the transfer function of the local dynamics is low-order, but full-rank, while the transfer function of the global dynamics is high-order, but low-rank, to formulate this separation task as a nuclear norm minimization problem. Finally, we conclude with a brief discussion of future research directions, with a particular emphasis on how to incorporate the results of this thesis, and those of optimal control theory in general, into a broader theory of dynamics, control and optimization in layered architectures.

In this study, the problem of finding an optimal controller for nonlinear systems with one input and a reference tracking signal is approached. With the problem's formulation, any desired signal can be tracked instantly with a closed-loop controller without the need for integral terms. Presentation lies at the heart of optimal control. This study, however, does not consider the integral term, allowing tracking and stability to occur naturally. It has a broad scope with a wide range of applications, namely when dealing with affine nonlinear systems, which provide geometric control unification with asymptotic stability in some cases. A common scenario that comes from optimal control involves the minimization of integral cost functionals. Issues like asymptotic stability or even tracking to the desired reference signal have always been the main limitations. In this study, the main theorem allows the solution of optimal control problems with no-integral terms, in other words tracking problems with input/state constraints, providing closed-loop controllers. A DC motor with a pendulum in upright position is an example of an application for which singular optimal control is tested in this study. The results confirm both asymptotic stability and optimal tracking with an accuracy of 95%. The main contributions of this study include an optimal closed-loop controller with no mixed initial/final conditions, input/state constraints, asymptotic stability guarantee, a strong connection with geometric tools and finally the possibility to generalize to systems with multiple inputs. As a conclusion, general nonlinear control systems can be included in the optimal control methodology presented in this study including input/state constraints. Due to the lack of integral terms, the problem can be solved in closed form by using an optimal closed-loop controller.

This paper proposes the optimal control methods for a class of chaotic systems via state feedback. By converting the chaotic systems to the form of uncertain piecewise linear systems, we can obtain the optimal controller minimizing the upper bound on cost function by virtue of the robust optimal control method of piecewise linear systems, which is cast as an optimization problem under constraints of bilinear matrix inequalities (BMIs). In addition, the lower bound on cost function can be achieved by solving a semidefinite programming (SDP). Finally, numerical examples are given to illustrate the results.

A novel multi-objective ADP method is constructed to obtain the optimal controller of a class of nonlinear time-delay systems in this chapter. Using the weighted sum technology, the original multi-objective optimal control problem is transformed to the single one. An ADP method is established for nonlinear time-delay systems to solve the optimal control problem. To demonstrate the presented iterative performance index function sequence is convergent and the closed-loop system is asymptotically stable, the convergence analysis is also given. The neural networks are used to get the approximative control policy and the approximative performance index function, respectively. Two simulation examples are presented to illustrate the performance of the presented optimal control method.

This paper is concerned with the optimal output synchronization control problem for a class of heterogeneous complex dynamical networks (CDNs) with partially unknown system dynamics. By defining a new quadratic performance index including the information of state couplings, an optimal controller consisting of a feedback control and a compensated feedforward control is then designed. A necessary and sufficient condition for the optimal control minimizing the quadratic performance index is established. Especially, an algebraic Riccati equation (ARE) associated with a discount factor is obtained, and a novel online iteration algorithm by iteratively solving the ARE is proposed to compute the optimal controller gain for the case that the CDNs are with partially unknown system dynamics. Moreover, it is proved that the output synchronization errors converge to zero asymptotically by applying the optimal control laws. Finally, two simulation examples are provided to verify the effectiveness of the proposed control method.

Summary form only given. This paper presents a computational approach for an offline measurement based design of an optimal damping controller using adaptive critics for a new type of FACTS device - the gate controlled series capacitor (GCSC). Remote measurements are provided to the controller to damp out system modes. The optimal controller is developed based on the heuristic dynamic programming (HDP) approach. Three multi-layer perceptron (MLP) neural networks are used in the design - the identifier/model network to identify the dynamics of the power system; the critic network to evaluate the performance of the damping controller; and the controller network to provide optimal damping. This measurement based technique provides an alternative to the classical linear model based optimal control design. The eigenvalue analysis of the closed loop system is performed with time domain responses using the Prony method. Analysis of the simulation results show potential of the HDP based optimal damping controller on a GCSC for enhancing the stability of the power system.

The issue of optimal controller design which is based on exact linearization of state feedback in the uncertain and chaotic systems with external disturbances is researched. First, based on the mature quadratic optimal control theory, the nonlinear chaotic system model with disturbance is converted to an equivalent linear system model without disturbance. Second, an optimal controller design method based on quadratic performance index is given which aims at pseudo-linear-system. The optimal control rate is shown after equation solution, and then the nonlinear chaotic system is changed into an equivalent linear system with Lie derivative transformation which makes the project simple and easily realized. With the simulation for parameter uncertainty in Liu chaotic systems, the result shows that the control quality has been greatly improved.