Distributed autonomous control of modular robot systems using parallel programming

A robot control system has to manage several tasks. In the first part of this paper these tasks are conceptually devided into eight classes. The robot control system has to satisfy all the requirements of these eight classes. However the complexity of the various tasks depends on the robot configuration and on the application. Therefore its necessary to develop a modular robot control system. In the second part of this paper such a modular multi-microprocessor-system is described. Not only hardware modularity is required but a modular software system is indispensable to adapt a robot control system to special applications. High-level languages support the software modularity.

The elements of an open architecture robot control system developed using Matlab/Simulink and a real time system are described. It offers the opportunity to control almost every robotic system (serial or parallel) with up to six axes while commercial robot controls are often designed for serial kinematic systems and can hardly be adapted to control robots with parallel structures. The described open architecture robot control programmed in Matlab/Simulink and ANSI-C is a modular system. To adapt the control to a new robotic structure it is necessary to add the transformation algorithms, position control algorithms, inputs and outputs and machine specific error states to the pre-programmed modules of the system. These modules are programmed by using Simulink elements extended by special functions of the real time system and so called S-Functions that are programmed in C-Code. In the control new functionalities can be implemented easily by adding new modules and connecting them with the present system. A pre-designed graphical user interface provides most of the input buttons and display information needed for a robot control. Graphical buttons or displays can be added and connected with the required signal from Matlab/Simulink by drag and drop. An application example of a parallel robot shows the functionalities of the control.

For almost a decade we have been working at developing and using template-based models for parallel computing. Template-based models separate the specification of the parallel structuring aspects from the application code that is to be parallelized. A user provides the application code and specifies the parallel structure of the application using high-level icons, called templates. The parallel programming system then generates the code necessary for parallelizing the application. The goal here is to provide a mechanism for quick and reliable development of coarse-grain parallel applications that employ frequently occurring parallel structures. Our initial template-based system, FrameWorks, was positively received but had a number of shortcomings. The Enterprise parallel programming environment evolved out of this work. Now, after several years of experience with the system, its shortcomings are becoming evident. Controlled experiments have been conducted to assess the usability of our system in comparison with other systems. The paper outlines our experiences in developing and using these systems. A list of desirable characteristics of template-based models is given. The FrameWorks and Enterprise systems are discussed in the context of these characteristics and the results of our usability experiments. Many of our observations are relevant to other parallel programming systems, even though they may be based on different assumptions. Although template-base models have the potential for simplifying the complexities of parallel programming, they have yet to realize these expectations for high-performance applications. © 1998 John Wiley & Sons, Ltd.

This paper proposes a method to navigate a mobile robot in human environment via an interaction through virtual 3D lines, which are handwritten in the air by a robot user who coexists with the robot. The objective of this navigation is to develop the flexible instruction of the appropriate route for a mobile robot in adaptation of various situations easily by embodied interaction between robots and users. The developed system was also integrated with the aerial 3D drawing interface and control system of robots. Mobile robots and a drawing hand position are measured by 6DOF sensors simultaneously in real time. The 3D drawing interface allows a user not only to draw 3D lines in the air based on the sensed position in the real world, but also to push, grasp and throw a drawn line manually on site. Each mobile robots are distinguished by an association with a color information of each drawn line, and search the own line in real time individually. Therefore, in this method, it was achieved that the user individually sets, and selects a specific route and change the route by drawing or manipulating lines while the robots are moving. We conducted some navigation experiments using two omni-wheel mobile robots and examined the aforementioned navigation function. Additionally, we tried some advanced navigation that can be achieved only by drawing, such as the dog-walking by likening a virtual line to string. As a result this method enables a user to instruct some complex path easily and change the root flexibly with interaction through virtual lines in response to changing environments.

The transportation using wheels is one of the most popular transportation mechanisms for mobile robots because a wheel type mobile system has high energy efficiency, simple mechanism and well investigated control system. However, the wheel type mobile robots have the difficulty in the rough terrain movement. In this research, we propose an environmental adaptive control system for a wheel type mobile robot for the rough terrain movement. This proposal system recognized the traveling environment and switched the adaptable controllers, and showed the better performance than only one controller.

The construction of a smart autonomous mobile robot system that can operate in an anonymous environment can be difficult. Building an autonomous mobile robot requires collecting data from sensors and cameras in order to recognize the surrounding environment, get knowledge of existing landmarks, and figure out its position and orientation. Many research studies have been carried out in recent years providing algorithms for achieving autonomous motion of mobile robot systems and object detection. The most common platform utilized for robot motion design is ROS (Robot Operating System) and for object detection YOLO (You Only Look Once) is a common choice. Additionally, the autonomous system needs motion planning in a systematic way to avoid obstacles by using LIDAR or other sensing methods generating the feedback signals required for control of motion around occupied spaces. One of the most effective and versatile feedback systems for mobile robot control can be constructed using visual feedback, which relies on a high-resolution camera that processes the image in real-time and the result is fed back to the control system for decision making. Visual feedback can be employed alone without sensors for feedback control of autonomous mobile robots, and it can be used for multiple tasks like path planning, obstacle avoidance, object detection, object recognition in addition to motion control. In this research, results of design and construction of an autonomous mobile rescue robot for finding victims through video data are presented. It is aimed to find victims via applying video as a data collection and feedback generation tool in the autonomous mobile robot control system. The visual feedback and YOLO v3 are used not only for finding victims but also for motion control. Our autonomous mobile robot is designed to move smoothly to the victim's direction and avoids obstacles by using ROS Global Planner. The robot is tested in multiple scenarios in different locations, various obstacle and victim numbers, and satisfactory results with good performances are obtained.

In this paper the procedure for automating the photon quantum experiments for mobile robotic applications is presented. Due to the rapid advances of quantum technologies and quantum engineering, the integration of quantum capabilities in robotic and autonomous systems will be inevitable, and therefore the study and investigation of compatibility and adaptability of quantum systems and classical autonomous systems is of great importance. In a quantum-classical hybrid setup, the source of single photon generation is placed on a leader robot which can send correlated single photons to robot followers. In the case of quantum entanglement, spontaneous parametric down-conversion process using nonlinear paired BBO crystals is implemented which sends entangled photons to the single photon counting modules installed on mobile robots. In the case of quantum cryptography, single photons are sent from Alice robot to Bob robot, where Alice has the course of single photon and Bob has a polarizing beamsplitter and two detectors and that can detect the polarization of photons as vertical and horizontal. Bob then can convert the polarizations to a digital signals as zeros and ones and use them as communication information for control purposes through a classical channel. Motorized optics equipment can automatically align the source of photons to detectors on the mobile robots. The automated alignment procedure is one of the key enabling technologies in integrating quantum capabilities with control of mobile robotic systems. In this paper, in particular, the automated alignment is studied while considering the uncertainties in the dynamic of the system which can potentially cause the alignment task very challenging. The uncertainty analysis in the automated alignment is implemented by Optimal Uncertainty Quantification technique to ensure achieving the quantum control of the robotic systems and presented here for the first time.

Off-Line Programming Environment for Robotic Applications

Mobile robot, especially wheeled mobile robot, with its simple mechanical structure and inherent agility, has attracted significant attentions for dynamic environment applications in the last two decades (Pin et al. 1994 and Purwin 2006). A general mobile robot Guidance, Navigation and Control (GNC) system is illustrated in the following figure. The main function of guidance system is to generate a feasible trajectory command, usually in multiple dimension of freedom (DOF) to achieve a robot task. The objective of control system is to drive the mobile robot following the commanded trajectory with acceptable tracking errors and stability margin. The function of robot navigation system is to provide accurate position, velocity and/or orientation information for the control system and guidance system. A stable and accurate navigation system is the bridge between the guidance system and control system of mobile robots, which ultimately determines the robot performance.

This paper describes a remote control system with a virtual force feedback in a mobile robot. In the mobile robot, a laser range finder is utilized to recognize environmental information. By using this environmental information and the specification of the mobile robot, the safety velocity area (SVA) is calculated in real-time. On the other hand, an operator generates the velocity commands for the mobile robot in real time. By using the relation between SVA and the velocity commands, the virtual force is generated. If the velocity commands are out of SVA, the operator can feel the virtual force. In the previous research, the virtual force is generated based on the only velocity differences. Therefore, the chattering of virtual force commands may occur. In order to solve this problem, this paper proposes the virtual force generation method with hysteresis. Therefore, the operability of the remote control system is increased. From experimental results, the validity of the proposed method was confirmed.

The development of robot technology is currently growing rapidly. Mobile robot is one robot with many applications in everyday life. One of the important things in the field of mobile robots is the problem of trajectories or trajectories, in this case how robots can track approved paths. In this study, the mobile robot control system has been tested to track tracks. The path used in this study is the third-order Bezier Order, with control points and end points of the predetermined pathway. Based on the results of simulation tests on the development of mobile robot trajectories, based on the results of simulation tests on mobile robots, it is found that the performance of the track tracking control system is very dependent on the placement of the Bezier curve control points or in other words the actual path formed by the robot is greatly influenced by the shape of the Bezier trajectory that was designed.

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vi

Retraction notice

Many bridges in Taiwan have been in use from the period that Taiwan was governed by the Japanese, over 50 years ago, which is the average ultimate usable lifetime of such structures. Three-quarters of the bridges on major highways have been in use for more than 20 years and numerous bridges on country roads have also been in use for more than 20 years. In other words, most of the bridges in Taiwan are aging and may require repair or replacement. Ambient vibration tests are utilized to measure the response of old bridges, which are difficult to equip with accelerometers. The Fourier transform method is traditionally used to gain important information about ambient vibration records. However, the development of information technology over the last 20 years has meant that there are more kinds of signal management technologies, including the wavelet and Hilbert—Huang transform (HHT) methods. In this study we investigate the characteristics of aging bridges by comparison with their structural properties. We analyze their ambient vibration, and discuss the possible influence of the frequency function. Long-term environmental impacts create many structural problems, but with traditional methods examination of bridge health is difficult. Therefore, in our HHT management system, we examine destroyed bridges. The characteristics and behavior of bridges subjected to random loading can be understood by analysis with the random decrement technique and the frequency response function method.

Retraction notice