DK-SLAM: Monocular Visual SLAM with Deep Keypoint Learning, Tracking, and Loop Closing

RGB-D cameras have become a popular sensor for Simultaneous Localization and Mapping (SLAM) because they can provide RGB and depth information at the same time. The spatial location of feature points of SLAM is obtained by its corresponding depth information from RGB-D sensors. However, the depth information of the feature at the edge of the object is very noisy, and the measurement is often inaccurate. At the same time, there is poor real-time performance, low accuracy, and much difficulties of dense construction in ORB-based Visual SLAM (visual SLAM, VSLAM). Therefore, an improved ORB features based SLAM framework with corresponding method using RGB-D data is proposed in this paper. We extract and match features with improved ORB. Then the local map is used to perform local optimization for pose estimation, and an efficient key frame screening method is designed. The proposed method effectively reduces errors, enhances robustness, and builds a dense map of the environment.

Current visual simultaneous localization and mapping (SLAM) systems have demonstrated commendable efficacy in static environments. However, the presence of dynamic objects in real-world settings frequently leads to system discrepancies, significantly impairing the accuracy and robustness of SLAM systems. Conventional visual SLAM approaches typically utilize epipolar constraints to mitigate the impact of outliers; nevertheless, they encounter limitations when confronted with a substantial number of dynamic or planar moving objects. To tackle these issues, this paper introduces a novel dynamic visual SLAM system, termed DEG-SLAM. Initially, the system employs the YOLOv5 object detection network to identify dynamic objects, subsequently relaying the semantic information to the tracking module. During the tracking phase, both semantic information and epipolar constraints are leveraged to filter out dynamic feature points. To address the challenges posed by the malfunctioning of epipolar constraints in degenerate scenes, DEG-SLAM incorporates a degenerate constraint mechanism aimed at further eliminating dynamic feature points. Furthermore, a reprojection constraint has been introduced to enhance the filtering of absent dynamic feature points that lie outside the detection boxes. Experimental findings reveal that DEG-SLAM significantly improves accuracy and robustness when compared to traditional ORB-SLAM3 in dynamic environments. The performance benefits of DEG-SLAM are particularly evident in degenerate scenarios, thereby affirming its practicality and reliability in complex settings.

Simultaneous localisation and mapping (SLAM) is crucial in mobile robotics. Most visual SLAM systems assume that the environment is static. However, in real life, there are many dynamic objects, which affect the accuracy and robustness of these systems. To improve the performance of visual SLAM systems, this study proposes a dynamic visual SLAM (SEG-SLAM) system based on the orientated FAST and rotated BRIEF (ORB)-SLAM3 framework and you only look once (YOLO)v5 deep-learning method. First, based on the ORB-SLAM3 framework, the YOLOv5 deep-learning method is used to construct a fusion module for target detection and semantic segmentation. This module can effectively identify and extract prior information for obviously and potentially dynamic objects. Second, differentiated dynamic feature point rejection strategies are developed for different dynamic objects using the prior information, depth information, and epipolar geometry method. Thus, the localisation and mapping accuracy of the SEG-SLAM system is improved. Finally, the rejection results are fused with the depth information, and a static dense 3D mapping without dynamic objects is constructed using the Point Cloud Library. The SEG-SLAM system is evaluated using public TUM datasets and real-world scenarios. The proposed method is more accurate and robust than current dynamic visual SLAM algorithms.

In low-light environments, the scarcity of visual information makes feature extraction and matching challenging for traditional visual simultaneous localization and mapping (SLAM) systems. Changes in ambient lighting can also reduce the accuracy and recall of loop closure detection. Most existing image enhancement methods tend to introduce noise, artifacts, and color distortions when enhancing images. To address these issues, we propose an innovative low-light visual-inertial (LL-VI) SLAM system, named LL-VI SLAM, which integrates an image enhancement network into the front end of the SLAM system. This system consists of a learning-based low-light enhancement network and an improved visual-inertial odometry. Our low-light enhancement network, composed of a Retinex-based enhancer and a U-Net-based denoiser, enhances image brightness while mitigating the adverse effects of noise and artifacts. Additionally, we incorporate a robust Inertial Measurement Unit initialization process at the front end of the system to accurately estimate gyroscope biases and improve rotational estimation accuracy. Experimental results demonstrate that LL-VI SLAM outperforms existing methods on three datasets, namely LOLv1, ETH3D, and TUM VI, as well as in real-world scenarios. Our approach achieves a peak signal-to-noise ratio of 22.08 dB. Moreover, on the TUM VI dataset, our system reduces localization error by 22.05% compared to ORB-SLAM3, proving the accuracy and robustness of the proposed method in low-light environments.

Simultaneous Localization and Mapping (SLAM) is a fundamental problem in mobile robotics. However, the majority of Visual SLAM algorithms assume a static scenario, limiting their applicability in real-world environments. Dealing with dynamic content in Visual SLAM is still an open problem, with solutions usually relying on direct or feature-based methods. Deep learning techniques can improve the SLAM solution in environments with a priori dynamic objects, providing high-level information of the scene. This paper presents a new approach to SLAM in human populated environments using deep learning-based techniques. The system is built on ORB-SLAM2, a state-of-the-art SLAM system. The proposed methodology is evaluated using a benchmark dataset, outperforming other Visual SLAM methods in highly dynamic scenarios.

Visual simultaneous localization and mapping (SLAM) in dynamic environments has received significant attention in recent years, and accurate segmentation of real dynamic objects is the key to enhancing the accuracy of pose estimation in such environments. In this study, we propose a visual SLAM approach based on ORB-SLAM3, namely dynamic multiple object tracking SLAM (DMOT-SLAM), which can accurately estimate the camera’s pose in dynamic environments while tracking the trajectories of moving objects. We introduce a spatial point correlation constraint and combine it with instance segmentation and epipolar constraint to identify dynamic objects. We integrate the proposed motion check method into DeepSort, an object tracking algorithm, to facilitate inter-frame tracking of dynamic objects. This integration not only enhances the stability of dynamic features detection but also enables the estimation of global motion trajectories for dynamic objects and the construction of object-level semi-dense semantic maps. We evaluate our approach on the public TUM, Bonn, and KITTI dataset, and the results show that our approach has a significant improvement over ORB-SLAM3 in dynamic scenes and performs better compared to other state-of-the-art SLAM approaches. Moreover, experiments in real-world scenarios further substantiate the effectiveness of our approach.

Dynamic visual SLAM based on probability screening and weighting for deep features

The current visual simultaneous localization and mapping (SLAM) systems require the use of matched feature point pairs to estimate camera pose and construct environmental maps. Therefore, they suffer from poor performance of the visual feature matchers. To address this problem, a visual SLAM using deep feature matcher is proposed, which is mainly composed of three parallel threads: Visual Odometry, Backend Optimizer and LoopClosing. In the Visual Odometry, the deep feature extractor with convolutional neural networks is utilized for extracting feature points in each image frame. Then, the deep feature matcher is used for obtaining the corresponding feature landmark pairs. Afterwards, a fusion method based on the last and the reference frame is proposed for camera pose estimation. The Backend Optimizer is designed to execute local bundle adjustment for a part of camera poses and landmarks (map points). While LoopClosing, consisting of a lightweight deep loop closure detector and the same matcher as the one used in Visual Odometry is utilized for loop correction based on pose graph. The proposed system has been tested extensively on most of benchmark KITTI odometry dataset. The experimental results show that our system yields better performance than the existing visual SLAM systems. It can not only run in real-time at a speed of 0.08 s per frame, but also reduce estimation error by at least 0.1 m.

PurposeVisual simultaneous localization and mapping (SLAM) has limitations such as sensitivity to lighting changes and lower measurement accuracy. The effective fusion of information from multiple modalities to address these limitations has emerged as a key research focus. This study aims to provide a comprehensive review of the development of vision-based SLAM (including visual SLAM) for navigation and pose estimation, with a specific focus on techniques for integrating multiple modalities.Design/methodology/approachThis paper initially introduces the mathematical models and framework development of visual SLAM. Subsequently, this paper presents various methods for improving accuracy in visual SLAM by fusing different spatial and semantic features. This paper also examines the research advancements in vision-based SLAM with respect to multi-sensor fusion in both loosely coupled and tightly coupled approaches. Finally, this paper analyzes the limitations of current vision-based SLAM and provides predictions for future advancements.FindingsThe combination of vision-based SLAM and deep learning has significant potential for development. There are advantages and disadvantages to both loosely coupled and tightly coupled approaches in multi-sensor fusion, and the most suitable algorithm should be chosen based on the specific application scenario. In the future, vision-based SLAM is evolving toward better addressing challenges such as resource-limited platforms and long-term mapping.Originality/valueThis review introduces the development of vision-based SLAM and focuses on the advancements in multimodal fusion. It allows readers to quickly understand the progress and current status of research in this field.

Simultaneous localization and mapping (SLAM) is one of the cornerstones of autonomous navigation systems in robotics and the automotive industry. Visual SLAM (V-SLAM), which relies on image features, such as keypoints and descriptors to estimate the pose transformation between consecutive frames, is a highly efficient and effective approach for gathering environmental information. With the rise of representation learning, feature detectors based on deep neural networks (DNNs) have emerged as an alternative to handcrafted solutions. This work examines the integration of sparse learned features into a state-of-the-art SLAM framework and benchmarks handcrafted and learning-based approaches by comparing the two methods through in-depth experiments. Specifically, we replace the ORB detector and BRIEF descriptor of the ORBSLAM3 pipeline with those provided by Superpoint, a DNN model that jointly computes keypoints and descriptors. Experiments on three publicly available datasets from different application domains were conducted to evaluate the pose estimation performance and resource usage of both solutions.

Unmanned mining is one of the most effective methods to solve mine safety and low efficiency. However, it is the key to accurate localization and mapping for underground mining environment. A novel graph simultaneous localization and mapping (SLAM) optimization method is proposed, which is based on Generalized Iterative Closest Point (GICP) three-dimensional (3D) point cloud registration between consecutive frames, between consecutive key frames and between loop frames, and is constrained by roadway plane and loop. GICP-based 3D point cloud registration between consecutive frames and consecutive key frames is first combined to optimize laser odometer constraints without other sensors such as inertial measurement unit (IMU). According to the characteristics of the roadway, the innovative extraction of the roadway plane as the node constraint of pose graph SLAM, in addition to automatic removing the noise point cloud to further improve the consistency of the underground roadway map. A lightweight and efficient loop detection and optimization based on rules and GICP is designed. Finally, the proposed method was evaluated in four scenes (such as the underground mine laboratory), and compared with the existing 3D laser SLAM method (such as Lidar Odometry and Mapping (LOAM)). The results show that the algorithm could realize low drift localization and point cloud map construction. This method provides technical support for localization and navigation of underground mining environment.

This paper proposes an appearance-based method to detect loop closure in visual SLAM (Simultaneous Localization and Mapping). To solve this problem, we make use of omnidirectional images and the internal odometry captured by a robot in a real indoor environment. We build an appearance-based model and, subsequently, two maps of the environment are constructed, one metric and other topological with relationships between them. These relationships are updated in each step of our hybrid approach. The topological map is a graph built from the appearance information in the scenes. A new node is added when the new visual information is different enough from the previous information. At the same time, we check a possible topological loop closure with previous nodes. On the other hand we estimate the metric position of the new pose using a Monte-Carlo approach with the aim of building a metric map. The experimental results demonstrate the reasonable performance of our method.KeywordsAppearance-base descriptorOmnidirectional ImagesMonte-Carlo SLAMHybrid Metric-Topological mappingLoop closure detection

Although tremendous progress has been made in Simultaneous Localization and Mapping (SLAM), the scene rigidity assumption limits wide usage of visual SLAMs in the real-world environment of computer vision, smart robotics and augmented reality. To make SLAM more robust in dynamic environments, outliers on the dynamic objects, including unknown objects, need to be removed from tracking process. To address this challenge, we present a novel real-time visual SLAM system, KMOP-vSLAM, which adds the capability of unsupervised learning segmentation and human detection to reduce the drift error of tracking in indoor dynamic environments. An efficient geometric outlier detection method is proposed, using dynamic information of the previous frames as well as a novel probability model to judge moving objects with the help of geometric constraints and human detection. Outlier features belonging to moving objects are largely detected and removed from tracking. The well-known dataset, TUM, is used to evaluate tracking errors in dynamic scenes where people are walking around. Our approach yields a significantly lower trajectory error compared to state-of-the-art visual SLAMs using an RGB-D camera.

Typical visual simultaneous localization and mapping (SLAM) systems rely on purely geometric elements. Recently semantic SLAM has become popular due to its capability to obtain high-level understanding of the environment. However, most semantic SLAM systems merely aim to produce semantic maps rather than exploiting semantic constraints to boost the accuracy performance. In this paper, we propose a new RGB-D SLAM system for the use in indoor environments. Given that a ground plane represents a significant part of most indoor scenes, our new system exploit a semantic ground plane constraint inferred from a deep neural network along with geometric constraints on the state estimation to improve the performance. More specifically, we introduce a semantically meaningful geometric primitive, namely, a global ground plane to the optimization process of visual SLAM. The global ground model is able to provide an extra constraint on the state estimation through which both frame-to-keyframe and frame-to-model tracking processes are combined, and low-texture ground plane is effectively utilized. Experimental results for the TUM dataset and a real scene have demonstrated the improved performance brought by the semantic constraint in our method.

Simultaneous localization and mapping (SLAM) techniques are widely researched, since they allow the simultaneous creation of a map and the sensors’ pose estimation in an unknown environment. Visual-based SLAM techniques play a significant role in this field, as they are based on a low-cost and small sensor system, which guarantees those advantages compared to other sensor-based SLAM techniques. The literature presents different approaches and methods to implement visual-based SLAM systems. Among this variety of publications, a beginner in this domain may find problems with identifying and analyzing the main algorithms and selecting the most appropriate one according to his or her project constraints. Therefore, we present the three main visual-based SLAM approaches (visual-only, visual-inertial, and RGB-D SLAM), providing a review of the main algorithms of each approach through diagrams and flowcharts, and highlighting the main advantages and disadvantages of each technique. Furthermore, we propose six criteria that ease the SLAM algorithm’s analysis and consider both the software and hardware levels. In addition, we present some major issues and future directions on visual-SLAM field, and provide a general overview of some of the existing benchmark datasets. This work aims to be the first step for those initiating a SLAM project to have a good perspective of SLAM techniques’ main elements and characteristics.