- Book Chapter
- 10.4018/978-1-7998-1210-4.ch045
Utilization of SVM, LSSVM and GP for Predicting the Medical Waste Generation
- Jan 01, 2020
- Waste Management
- J Jagan + 2 more +2
Utilization of SVM, LSSVM and GP for Predicting the Medical Waste Generation
The minimal complexity support vector machine is a fusion of the support vector machine (SVM) and the minimal complexity machine (MCM), and results in maximizing the minimum margin and minimizing the maximum margin. It works to improve the generalization ability of the L1 SVM (standard SVM) and LP (Linear Programming) SVM. In this paper, we discuss whether it also works for the LS (Least Squares) SVM. The minimal complexity LS SVM (MLS SVM) is trained by minimizing the sum of squared margin errors and minimizing the maximum margin. This results in solving a set of linear equations and a quadratic program, alternatingly. According to the computer experiments for two-class and multiclass problems, the MLS SVM does not outperform the LS SVM for the test data although it does for the cross-validation data.
Utilization of SVM, LSSVM and GP for Predicting the Medical Waste Generation
Utilization of SVM, LSSVM and GP for Predicting the Medical Waste Generation
Utilization of SVM, LSSVM and GP for Predicting the Medical Waste Generation
The prediction of wastes generated in the hospital will help their management for several activities like storage, transport and disposing. This chapter adopts Support Vector Machine (SVM), Least Square Support Vector Machine (LSSVM) and Genetic Programming (GP) in order to estimate the rate of medical waste generation. In the event of predicting the rate, type of hospital, capacity and bed occupancy has been used as inputs of SVM, LSSVM and GP. SVM is based on statistical learning theory, which provides an elegant tool for nonlinear system modeling. LSSVM is the re-formulation to the general SVM. GP, a best part of evolutionary algorithm and also the specification of Genetic Algorithm (GA). These SVM, LSSVM and GP have been used as the regression techniques. The results show the performance of the developed SVM, LSSVM and GP models were elegant and outstanding.
Read moreUtilization of SVM, LSSVM and GP for Predicting the Medical Waste Generation
The prediction of wastes generated in the hospital will help their management for several activities like storage, transport and disposing. This chapter adopts Support Vector Machine (SVM), Least Square Support Vector Machine (LSSVM) and Genetic Programming (GP) in order to estimate the rate of medical waste generation. In the event of predicting the rate, type of hospital, capacity and bed occupancy has been used as inputs of SVM, LSSVM and GP. SVM is based on statistical learning theory, which provides an elegant tool for nonlinear system modeling. LSSVM is the re-formulation to the general SVM. GP, a best part of evolutionary algorithm and also the specification of Genetic Algorithm (GA). These SVM, LSSVM and GP have been used as the regression techniques. The results show the performance of the developed SVM, LSSVM and GP models were elegant and outstanding.
Read moreError tolerance based support vector machine for regression
Error tolerance based support vector machine for regression
Fault diagnosis of power transformers using multi-class least square support vector machines classifiers with particle swarm optimisation
This study presents a multi-class least square support vector machines (LS-SVM)-based classifier for transformer fault diagnosis. First, the original binary classifier is extended for multi-class classification that is common in fault diagnosis by using combination schemes, that is, the minimal output coding, error correcting output codes, one-against-one and one-against-all schemes. Second, the algorithm of particle swarm optimisation is implemented to select the optimal feature parameters for the multi-class LS-SVM classifiers. Then the effectiveness of the proposed approach is verified on the basis of the experiments on benchmark classification data and real-world transformer data. For comparison purpose, three widely used transformer diagnosis methods such as the IEC criteria, back propagation neural network and standard support vector machines are utilised. The results show the proposed approach has a better performance both in training and testing accuracies.
Read moreProcessing of spectrophotometric array signals using an artificial intelligence method
This paper addresses processing of spectrophotometric array signals based on genetic algorithms (GA) least square support vector machines (LS-SVM) regression to provide a powerful model for machine learning and data mining. The key to complete LS-SVM regression is to choose its optimal parameters. Due to their outstanding ability in solving global optimization problems in complex multidimensional search space, GA are used in this study to obtain the optimal parameter combination of the LS-SVM model. Experimental results showed the GA-LS-SVM method to be successful for simultaneous multicomponent determination even where severe overlap of spectra was present. KeywordsLeast squares support vector machines; Genetic algorithms; Spectrophotometric array signals; Overlapping spectra; Artificial intelligence Nowadays, with the application of photometric diode array detector and computers, rapid scanning commercial spectrophotometers are capable of quickly generating huge data consisting of hundreds and even thousands of absorbance values per spectrum. The array data named fullspectrum contain sufficient information to be able to determine the contents of various compounds. The main drawback of ultraviolet-visible (UV-VIS) is its poor selectivity because in many cases UV-VIS spectra display strong overlaps, especially some less specific and selective chromagenic reagents often give rise to strongly overlapped spectra in many cases. The combination of artificial intelligence methods with the computer-controlled spectrophotometers was proven to be effective in overcoming this difficulty [1-3]. Artificial neural network (ANN) is a form of artificial intelligence that mathematically simulates biological nervous system [4, 5]. However, ANN often has slow convergence, is prone to the existence of many local minima during training, and has a tendency of overfitting. Recently, a promising technology called support vector machines (SVM) has been used for classification and regression problems. SVM pioneered by Vapnik is a kind of machine learning method based on modern statistical learning theory and has notable properties including absence of local minima and high generalization ability [6, 7]. Suykens and his coworkers [8] introduced a modified version of SVM called least square SVM (LS-SVM) , which requires solving a set of linear equations instead of a quadratic programming problem and is much easier and computationally simpler than SVM. SVM and LS-SVM represent relatively recent artificial intelligence method and have found some applications in image analysis, classification and disease diagnosis etc. [9, 10]. It is worth mentioning that the success of LS-SVM model is highly dependent on the optimum choice of two parameters, the relative weight of regression error γ and the kernel width σ of radial basis function (RBF). Genetic algorithms (GA) [11, 12] introduced by John Holland are probabilistic optimization techniques based on natural evolution and genetics and Darwin’s theory of survival of the best. With their efficient and robust global search ability, GA are used to search two optimal parameters for the LS-SVM model simultaneously and automatically. The LS-SVM model then performs the regression task using these optimal parameters.
Read moreStock Yield Forecast Based on LS-SVM in Bayesian Inference
Stock yield forecast has been an important issue and difficult task for both shareholders and financial professionals. In this paper, we introduce least square support vector machine (LS-SVM), an improved algorithm that regresses faster than standard SVM, and the parameters of model proposed are gained in the three levels of Bayesian inference. The work of this paper is as following: First, forecast daily stock Yield of Shanghai Security Exchanges of China using back propagation neural network (BPNN) and LS-SVM. Secondly, forecast the stock yield using LS-SVM in Bayesian framework. Finally, make a comparative analysis of the three algorithms. We reached conclusion that, in terms of forecast accuracy, LS-SVM outperforms BPNN, and when LS-SVM in Bayesian inference, the best result is achieved.
Read moreStock Return Forecast with LS-SVM and Particle Swarm Optimization
Stock return forecast has been an important issue and difficult task for both shareholders and financial professionals. To tackle this problem, we introduce Least Square Support Vector Machine (LS-SVM), an improved algorithm that regresses faster than standard SVM, and Dynamic Inertia Weight Particle Swarm Optimization (W-PSO), that outperform standard PSO in parameter selection. The work of this paper is as following: First, forecast daily stock Return of Shanghai Security Exchanges of China using Back Propagation Neural Network (BPNN) and LS-SVM. Secondly, forecast the stock return using LS-SVM optimized by W- PSO. Finally, make a comparative analysis of the three algorithms. We reached conclusion that, in terms of forecast accuracy, LS-SVM outperforms BPNN, and when LS-SVM is optimized by W-PSO, the best result is achieved.
Read moreA portable Vis-NIR spectrometer to determine soluble solids content in Gannan navel orange by LS-SVM and EWs selection
The objective of this paper was to determine soluble solids content (SSC) of intact Gannan navel orange by a portable near-infrared (NIR) spectrometer with the optical fiber in the wavelength range of 551~950nm. The effective wavelength regions (EWs) were chosen from the spectra pro-processed by second derivative by interval partial least square (iPLS) and backward interval partial least square (Bipls). Then the partial least square (PLS) and least square support vector machine (LS-SVM) models were developed with EWs. 60 unknown samples were used to evaluate the performance of them. The LS-SVM model was better than others with EWs chosen by Bilps. The correlation coefficient (R) and root mean square error of prediction (RMSEP) for LS-SVM (Bipls) were 0.86 and 0.55°Brix. The results showed that the portable NIR combination with LS-SVM was a feasible method to determine SSC of intact Gannan navel orange nondestructively.
Read moreAnalysis of epimetamorphic rock slopes using soft computing
This article adopts three soft computing techniques including support vector machine (SVM), least square support vector machine (LSSVM) and relevance vector machine (RVM) for prediction of status of epimetemorphic rock slope. The input variables of SVM, LSSVM and RVM are bulk density, height, inclination, cohesion and internal friction angle. There are 53 datasets which have been used to develop the SVM, LSSVM and RVM models. The developed SVM, LSSVM and RVM give equations for prediction of status of epimetemorphic rock slope. The performance of SVM, LSSVM and RVM is 100%. A comparative study has been presented between the developed SVM, LSSVM and RVM. The results confirm that the developed SVM, LSSVM and RVM are effective tools for prediction of status of epimetemorphic rock slope.
Read moreThe Contrastive Analysis of Predicting Riveting Pieces of Corrosion Fatigue Based on Multiple Kernel Function
In the process of long-term storage, the equipment would happen storage environment contaminated corrosion, mechanical structure stress corrosion damage. Currently,the corrosion fatigue damage prediction accuracy of method was low. Different kernel functions were adopted by this paper to compare based on least squares support vector machine (LSSVM). Besides, comparison was made among the BP neural network method, Standard Support Vector Machines (SVM), Grey System Prediction model Method and the radial basis function kernel least squares support vector machine (RBF_LSSVM) method by the simulation experiment. The optimal results finally were applied to practical engineering. The results showed that high accuracy and performance could be gained by employing the RBF_LSSVM method for predicting the trends of the mechanical structure rivet corrosion.
Read moreExperimental observations and SVM-based prediction of properties of polypropylene fibres reinforced self-compacting composites incorporating nano-CuO
Experimental observations and SVM-based prediction of properties of polypropylene fibres reinforced self-compacting composites incorporating nano-CuO
Read moreThunderstorm prediction study based on PCA and least square support vector machine
This electronic For the limitations of dependence on previous experience and neural network forecasting model in current thunderstorm prediction. Considering the characteristics of the thunderstorm in Chongqing, the thunderstorm prediction model based on least square support vector machine (LS-SVM) is established. The data are preprocessed by principal component analysis(PCA) firstly. Then, the search space of the penalty parameter and the kernel parameter is defined by analyzing the influence of the two parameters on the performance of LS-SVM classifier and the modeling process and parameters selection are analyzed. Lastly the thunderstorm prediction model based on LS-SVM is constructed and implemented. Comparing with neural network and standard SVM, the results show that the LS-SVM model has better prediction results and faster running speed.
Read moreDesign and implementation of construction cost prediction model based on SVM and LSSVM in industries 4.0
PurposeIn order to improve the accuracy of project cost prediction, considering the limitations of existing models, the construction cost prediction model based on SVM (Standard Support Vector Machine) and LSSVM (Least Squares Support Vector Machine) is put forward.Design/methodology/approachIn the competitive growth and industries 4.0, the prediction in the cost plays a key role.FindingsAt the same time, the original data is dimensionality reduced. The processed data are imported into the SVM and LSSVM models for training and prediction respectively, and the prediction results are compared and analyzed and a more reasonable prediction model is selected.Originality/valueThe prediction result is further optimized by parameter optimization. The relative error of the prediction model is within 7%, and the prediction accuracy is high and the result is stable.
Read moreImprovement of Time Forecasting Models Using Machine Learning for Future Pandemic Applications Based on COVID-19 Data 2020–2022
Improving forecasts, particularly the accuracy, efficiency, and precision of time-series forecasts, is becoming critical for authorities to predict, monitor, and prevent the spread of the Coronavirus disease. However, the results obtained from the predictive models are imprecise and inefficient because the dataset contains linear and non-linear patterns, respectively. Linear models such as autoregressive integrated moving average cannot be used effectively to predict complex time series, so nonlinear approaches are better suited for such a purpose. Therefore, to achieve a more accurate and efficient predictive value of COVID-19 that is closer to the true value of COVID-19, a hybrid approach was implemented. Therefore, the objectives of this study are twofold. The first objective is to propose intelligence-based prediction methods to achieve better prediction results called autoregressive integrated moving average-least-squares support vector machine. The second objective is to investigate the performance of these proposed models by comparing them with the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine. Our investigation is based on three COVID-19 real datasets, i.e., daily new cases data, daily new death cases data, and daily new recovered cases data. Then, statistical measures such as mean square error, root mean square error, mean absolute error, and mean absolute percentage error were performed to verify that the proposed models are better than the autoregressive integrated moving average, support vector machine model, least-squares support vector machine, and autoregressive integrated moving average-support vector machine. Empirical results using three recent datasets of known the Coronavirus Disease-19 cases in Malaysia show that the proposed model generates the smallest mean square error, root mean square error, mean absolute error, and mean absolute percentage error values for training and testing datasets compared to the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine models. This means that the predicted value of the proposed model is closer to the true value. These results demonstrate that the proposed model can generate estimates more accurately and efficiently. Compared to the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine models, our proposed models perform much better in terms of percent error reduction for both training and testing all datasets. Therefore, the proposed model is possibly the most efficient and effective way to improve prediction for future pandemic performance with a higher level of accuracy and efficiency.
Read more