Dominant color and texture feature extraction for banknote discrimination

Inspection of paddy seed varietal purity using machine vision and multivariate analysis

This paper introduces a HVS Weighted color features’ extract method. Firstly, we split the image into sub-blocks and draw the color feature consists of dominant colors in each sub-block. Then weighting the gained color features by making use of Human Visual System. So we can obtain the weighted dominant color feature. Comparing with traditional histogram method and split blocks dominant color method, the experiment results show that the proposed algorithm based on weighted dominant color feature has better retrieval precision.

Content-Based Image Retrieval (CBIR) allows to automatically extracting target images according to objective visual contents of the image itself. Representation of visual features and similarity match are important issues in CBIR. Color, texture and shape information have been the primitive image descriptors in content-based image retrieval systems. This paper presents a fast and efficient image indexing and search system based on color and texture features. The color features are represented by combines 2-D histogram and statistical moments and texture features are represented by combines the direction measure and a gray level co-occurrence matrix (GLCM). The detailed experimental analysis is carried out using precision and recall ondataset Wang. The time analysis is also performed to compare processing speeds of the proposed method with the existing similar best. The experimental results demonstrated that proposed method achieved a better image recognition, and the accuracy of classification based on this method has been significantly improved. The performance is measured in terms of recall and precision; also the obtained performances are compared with several state-of-the-art algorithms and showed that our algorithm is simple, fast, and efficient in terms of results and memory. Keywords: Co-occurrence Matrix, Direction Measure, 2-D Histogram, Statistical Moments, CBIR, GLCM

Radiomics has shown potential in disease diagnosis, but its feasibility for non-small cell lung carcinoma (NSCLC) subtype classification is unclear. This study aims to explore the diagnosis value of texture and colour features from positron emission tomography computed tomography (PET-CT) images in differentiation of NSCLC subtypes: adenocarcinoma (ADC) and squamous cell carcinoma (SqCC). Two patient cohorts were retrospectively collected into a dataset of 341 18F-labeled 2-deoxy-2fluoro-d-glucose ([18F] FDG) PET-CT images of NSCLC tumours (125 ADC, 174 SqCC, and 42 cases with unknown subtype). Quantification of texture and colour features was performed using freehand regions of interest. The relation between extracted features and commonly used parameters such as age, gender, tumour size, and standard uptake value (SUVmax) was explored. To classify NSCLC subtypes, support vector machine algorithm was applied on these features and the classification performance was evaluated by receiver operating characteristic curve analysis. There was a significant difference between ADC and SqCC subtypes in texture and colour features (P < 0.05); this showed that imaging features were significantly correlated to both SUVmax and tumour diameter (P < 0.05). When evaluating classification performance, features combining texture and colour showed an AUC of 0.89 (95% CI, 0.78–1.00), colour features showed an AUC of 0.85 (95% CI, 0.71–0.99), and texture features showed an AUC of 0.68 (95% CI, 0.48–0.88). DeLong’s test showed that AUC was higher for features combining texture and colour than that for texture features only (P = 0.010), but not significantly different from that for colour features only (P = 0.328). HSV colour features showed a similar performance to RGB colour features (P = 0.473). The colour features are promising in the refinement of NSCLC subtype differentiation, and features combining texture and colour of PET-CT images could result in better classification performance.

Image retrieval is the process of finding images in the database that are similar to the query image by measuring how close the feature values of the query image are to other images. Image retrieval is currently dominated by approaches that combine several different representations or features. The optimal weight of each feature is needed in combining the image features such as color features, texture features, and shape features. In this study, we use a multi-layer perceptron artificial neural network (MLP) method to obtain feature weights automatically and simultaneously look for optimal weights. The color moment is used to find nine color features, Gray Level Co-occurrence Matrix (GLCM) to find four texture features, and Hu Moment to find seven shape features totaling 20 neurons and all of these features become the input layer in our MLP network. Three neurons in output layers become the automatic weight of each feature. These weights are used to combine each feature's role in obtaining the relevant image. Euclidean Distance is used to measure similarity. The average precision values obtained using automatic feature weights are 93.94% for the synthetic dataset, 91.19% for the Coil-100 dataset, and 54.31% for the Wang dataset. These results have an average difference of 5.06% with the target so automatic feature weighting works well. This value is obtained at a hidden layer size of 11 and a learning rate of 0.1. In addition, the use of automatic feature weighting gives more accurate results compared to manual feature weighting.

Purpose: Endoscopic digital images contain rich information on texture and color. There is increasing interest in differentiating tissue pathology based on the patterns of color and texture features of endoscopic images extracted by digital image analysis (DIA). Objective: In this study, we applied techniques of DIA to endoscopic images of diminutive polyps in order to identify the color and texture features of endoscopic images that may differentiate adenomatous polyps from hyperplastic polyps. Methods: Methods: Our endoscopic image database was searched to retrieve and store digital images of diminutive polyps with diagnosis confirmed by histopathology. Texture analysis was performed on multiple regions of interest (ROIs) digitally selected in these images using the MatLab image processing toolbox; the following texture parameters were extracted: histogram (first order statistics) run-length and co-occurrence matrix (measuring features of runs of pixels and distribution of pairs of pixels), gradient analysis (spatial distribution of pixels), auto-regressive analysis (measurement of local interaction amongst pixels of different grey level values) and also wavelet analysis (which measures parameters of spatial frequency). Principal component analysis (PCA) was used for data reduction, and an artificial neural network (NN) based predictive model was built, trained and validated using the extracted texture features for classification of adenomatous polyps from hyperplastic polyps. Results: Results: A total of 110 and 109 ROIs were selected from endoscopic images of 30 and 28 patients with diminutive adenomatous and hyperplastic polyps, respectively. The sensitivity and specificity of the multilayered perceptron neural network classification model were both 82% with an area under the receiver operating characteristic (ROC) curve of 0.87. Three types of features of pixel distribution had high discriminatory power: Kurtosis (measure of the steepness of the pixel distribution), angular second momentum and horizontal and vertical grey level non-uniformity (parameters estimating the second order joint conditional probability density functions of spatial distribution of two neighboring pixels) Conclusion: Conclusion: Results of this exploratory study suggest that the technique DIA may be a clinically useful adjunct for non-invasive automated diagnosis of diminutive colon polyps, particularly if available as a real-time application.

We address the problem of localizing objects using color, texture and shape. Given a handrawn sketch for querying an object shape, and its color and texture, the algorithm automatically searches the database images for objects which meet the query attributes. The database images do not need to be presegmented or annotated. The proposed algorithm operates in two stages. In the first stage, we use local texture and color features to find a small number of candidate images, and identify regions in the candidate images which share similar texture and color as the query example. To speed up the processing, the texture and color features are directly extracted from the Discrete Cosine Transform (DCT) compressed domain. In the second stage, we use a deformable template matching method to match the query shape to the image edges at the locations which possess the desired texture and color attributes. This algorithm is different from the other content-based image retrieval algorithms in that: (i) no presegmentation of the database images is needed, and (ii) the color and texture features are directly extracted from the compressed images. Experimental results show that substantial computational savings can be achieved utilizing multiple image cues.

Object localization using color, texture and shape

Image recognition is a feature extraction and pattern matching technique to classify various objectives in computer science. In theory, it mainly relies on the images with distinguishable features as a good starting point. Each image has its own unique characteristics, and image features can be categorized into color features, texture features, and shape features etc. Therefore, using modern recognition techniques, we extract the image features through various algorithms to search for images with high similarities. There are many image recognition algorithms, and some of them are with high recognition rate while others are robust. But not all algorithms can be unconditionally implemented without adjusting to the real situation. In this paper, we introduce the classification algorithm based on Support Vector Machine (SVM) and the feature extraction method based on Principal Components Analysis (PCA). We employ the feature extraction algorithm to characterize facial features and recognize faces by comparing them to those stored in the training data set. Finally, we show the applications of feature extraction and classification algorithms in character recognition. The real characters printed on a cord are preprocessed by PCA, and then classified and identified by SVM with a good recognition rate if properly processed.

In this chapter, a content-based image retrieval technique based on the concept of region-based image retrieval has been described. This technique integrates color, texture, and shape features using local binary patterns (LBPs). In this technique, the image is divided into a fixed number of blocks and from each block LBP-based color, texture, and shape features are computed. The color and texture features are extracted using LBP histograms of quantized color image and gray-level images, respectively. Shape features are computed using the binary edge map obtained using Sobel edge detector from each block. All three features are combined to make a single completed binary region descriptor (CBRD) represented in the LBP way. To support region-based retrieval, an effective region code-based scheme is employed. In this technique, the spatial relative locations of objects are also considered to increase the retrieval accuracy.

In this paper we develop a new image retrieval method based on combined color feature and spatial feature. We introduce an ant colony clustering algorithm, which helps us develop a perceptually dominant color descriptor. The similarity between any two images is measured by combining the dominant color feature with its spatial feature. The optimal matching theory is employed to search the optimal matching pair of dominant color sets of any two images, and the similarity between the query image and the target image is computed by summing up all the distances of every matched pair of dominant colors. The algorithm introduced in this paper is well suited for creating small spatial color descriptors and is efficient. It is also suitable for image representation, matching and retrieval.KeywordsSpatial FeatureColor FeatureOptimal MatchDominant ColorCIELAB Color SpaceThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

With the emerge of multimedia, communication and processing, a typical image database has a large volume of data. It is an essential to build an efficient retrieval system to browse through the entire database. In this paper we proposed precise Relevance Feed Back (RFB) Content Based Image Retrieval (CBIR) using multiple features based on interactive retrieval approach which will extensively reduces the semantic gap between low-level features and high-level semantics. Relevance Feed Back improves the retrieval accuracy of Content Based Image Retrieval(CBIR) by modifying the query based on the user's feedback in which the user can select the most relevant images and provide a weight of preference for each relevant image. In our approach we extracted multiple features by integrating color, texture and shape features with Relevance Feed Back. We extracted color features by cumulative histogram, texture feature are exploited by using Color co-occurrence matrix (CCM) and we describe the shape information contained in an image on the basis of its significant edges. We used Euclidean distance as the similarity measure. In our experiment we used Corel real-world image databases with 1000 images, divided into 10 categories, each category containing 100 images including landscapes, animals, plants, monuments, transport (cars, planes). Our results reflects that integrating color, texture and shape for retrieving similar images improves the retrieval performance with respect to retrieval accuracy and recall rate as compared with the classical color feature. During the experiment we also observed that incorporating Relevance Feed Back (RFB) with multiple features outperforms in comparison with multifeature vector without Relevance Feed Back method.

Rapid development of multimedia technologies made Content Based Image Retrieval (CBIR) an energetic research area for the researchers of multimedia domain. Texture and color features have been the primal descriptors for images in the field of CBIR. This paper proposed a new CBIR system by combining the both color and texture features. Color Layout Descriptor (CLD) from MPEG-7 is used for the color feature extraction while, Mean, variance, skewness, Kurtosis, energy and entropy are used as texture descriptors. Experiments are performed on Coral Database. The results of the proposed method namely CLD-fos are compared with the four well reputed systems (i.e. SIMPLIcity, Histogram based, FIRM, and Variance Segment etc) from the industry. The results of the CLD-fos demonstrated high accuracy rate than the previous systems during the simulations. The proposed CLD-fos achieved significant performance in terms of accuracy.

Remote sensing technology provides an unprecedented tool for the continuous and real-time monitoring of atmospheric SO2 from volcanic eruption and anthropogenic emission. The Global Ozone Monitoring Experiment (GOME), SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY), and Ozone Monitoring Instrument (OMI) have high SO2 monitoring capability. The OMI, which was launched on the EOS/Aura platform in July 2004, has the same hyperspectral measurements as the GOME and SCIAMACHY, but offers the improved spatial resolution at nadir (1324 km2) and daily global coverage for short-lifetime SO2. For OMI operational SO2 planetary boundary layer (PBL) retrieval, the previous band residual difference (BRD) algorithm has been replaced by principal component analysis (PCA) algorithm, which effectively reduces the systematic biases in SO2 column retrievals. However, there are few studies on the evaluations and validations of PCA SO2 retrievals over China, and the long-term comparisons with BRD SO2 retrievals also need to be conducted. In this study, the accuracies of PCA and BRD SO2 retrievals are validated by using ground-based multi axis differential optical absorption spectroscopy (MAX-DOAS) located in Beijing, and regional atmospheric modeling system, community multi-scale air quality (RAMS-CMAQ) modeling system model which can simulate the vertical distribution of atmospheric SO2. Moreover, BRD and PCA SO2 retrievals from oceanic area, eastern China and Reunion volcanic eruption are compared to find the long-term trend and spatiotemporal differences between SO2 columns. Finally, the uncertainty of SO2 retrieval, caused by measurement errors, band selection and input parameter errors in radiative transfer model, are analysed to understand the limitations of BRD and PCA algorithms. Results show that both PCA and BRD SO2 retrievals over Beijing are lower than ground-based MAX-DOAS measurements of SO2. PCA and BRD SO2 retrievals over eastern China are lower than the simulated SO2 columns from RAMS-CMAQ in winter 2008, but in July and August BRD SO2 columns are higher than RAMS-CMAQ simulations. The values of SO2 columns from BRD over China are more consistent with those from ground-based MAX-DOAS and RAMS-CMAQ model than from PCA. Although PCA algorithm effectively reduces the noise in SO2 column retrieval, SO2 columns from PCA over China are lower than those from BRD. For oceanic area where SO2 amount is nearly zero, the standard deviation of PCA results is lower than that of BRD, but the absolute value of averaged PCA SO2 column is larger than that of BRD. In the case of Reunion volcanic eruption with SO2 columns larger than 25 DU, the BRD SO2 columns are lower than PCA retrievals. Meanwhile, with the increase of SO2 column, the difference between BRD and PCA SO2 retrievals increases. Detailed uncertainty analysis shows the influences of measurement errors, band selection and inputs of radiative transfer model on the retrieval results. This study is important for developing the retrieval algorithm, and can also improve the application of OMI SO2 products.

In content based image retrieval (CBIR) process, every image has been represented in a compact set of local visual features i.e. color, texture, and/or shape of images. This set of local visual features is known as feature vector. In the CBIR process, feature vectors of images have been used to represent or to identify similar images in adequate way. As a result, feature vector construction has always been considered as an important issue since it must reflect proper image semantics using minimal amount of data. The proposed CBIR scheme is based on the combination of color and texture features. In this work initially, we have converted the given RGB image into HSV color image. Subsequently, we have considered H (hue), S (saturation), and V (intensity) components for extraction of visual image features. The texture features have been extracted from the V component of the image using 2D dual-tree complex wavelet transform (2D DT-CWT) where it analyzes the textural patterns in six different directions i.e. ±15\(^{\circ }\), ±45\(^{\circ }\), and ±75\(^{\circ }\). At the same time, we have computed the probability histograms of H and S components of the image respectively and subsequently those are divided into non-uniform bins based on cumulative probability for extraction of color based features. So, in this work both the color and texture features have been extracted simultaneously. Finally, the obtained features have been concatenated to attain the final feature vector and same is considered in image retrieval process. We have tested the novelty and performance of the proposed work in two Corel, two objects, and, a texture image datasets. The experimental results reveal the acceptable retrieval performances for different types of datasets.