Double Lock Label Based on Thermosensitive Polymer Hydrogels for Information Camouflage and Multilevel Encryption.

Developing extra safety encryption technologies to prevent information leakage and combat fakes is in high demand but is challenging. Herein, we propose a “double lock” strategy based on both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) polymer hydrogels for information camouflage and multilevel encryption. Two types of hydrogels were synthesized by the method of random copolymerization. The number of −CO−NH2 groups in the network structure of the hydrogels changed the enthalpic or entropic thermo‐responsive hydrogels, and ultimately precisely controlled their phase transition temperature. The crosslink density of the polymer hydrogels governs the diffusion kinetics, resulting in a difference in the time for their color change. The combination of multiple LCST and UCST hydrogels in one label realized information encryption and dynamic information identification in the dimensions of both time and temperature. This work is highly interesting for the fields of information encryption, anti‐counterfeiting, and smart responsive materials.

Smart windows are effective in reducing the energy consumption of air conditioning and lighting systems, while contributing to maintaining the comfort zone of temperature in the indoor environment. Currently used smart windows mainly rely on traditional single-phase thermochromic material in which only one abrupt optical change occurs during temperature changes, and their inherent characteristics may not be suited for a practical balance of energy saving and privacy protection. Here, we developed a novel bidirectional optically responsive smart window (BSW) with unique bidirectional optical response features by introducing sodium dodecyl sulfate (SDS)/potassium tartrate (PTH) micelles into PNIPAM hydrogel to form a composite hydrogel, which was encapsulated in two glass panels. The upper critical solution temperature (UCST) and lowest critical solution temperature (LCST) of the material can be individually adjusted and are capable of matching the human comfort zone of temperature. In addition, the smart window exhibits remarkable transparency (92.5%), visible light transmission ratio (Tlum = 91.31%), and excellent solar modulation (ΔTsol,UCST = 76.34%, ΔTsol,LCST = 76.75%). Moreover, it possesses selectivity in transmitting light in the infrared band of solar radiation and can complete the "transparent-opaque" transition in a very narrow temperature range (<1 °C). When at comfortable temperatures, the highly transparent smart windows facilitate interior light and appreciation of the view. At low temperatures, SDS/PTH micelles aggregate to form large micelles, blocking the transmission of light and protecting customer privacy. At high temperatures, PNIPAM can undergo a "sol-gel" transition, thus blocking incident solar radiation. Taken together, these proposed materials with bidirectional optical response characteristics would be harnessed as a promising platform for building energy conservation, anti-counterfeiting, information encryption, and temperature monitoring.

Core-shell microgels were synthesized via a free radical emulsion polymerization of thermoresponsive poly-(N-isopropyl acrylamide), pNipam, on the surface of silica nanoparticles. Pure pNipam microgels have a lower critical solution temperature (LCST) of about 32 °C. The LCST varies slightly with the crosslinker density used to stabilize the gel network. Including a silica core enhances the mechanical robustness. Here we show that by varying the concentration gradient of the crosslinker, the thermoresponsive behaviour of the core-shell microgels can be tuned. Three different temperature scenarios have been detected. First, the usual behaviour with a decrease in microgel size with increasing temperature exhibiting an LCST; second, an increase in microgel size with increasing temperature that resembles an upper critical solution temperature (UCST), and; third, a decrease with a subsequent increase of size reminiscent of the presence of both an LCST, and a UCST. However, since the chemical structure has not been changed, the LCST should only change slightly. Therefore we demonstrate how to tune the particle size independently of the LCST.

Development of high flux ultrafiltration polyphenylsulfone membranes applying the systems with upper and lower critical solution temperatures: Effect of polyethylene glycol molecular weight and coagulation bath temperature

We rationally designed a monomer that when polymerized formed a well-defined nonionic polymer [poly(2-(methacryloyloxy) ethylureido glycinamide), PMEGA] by reversible addition fragmentation chain transfer with a flat and tunable upper critical solution temperature (UCST) in water. The monomer was made in one pot from commercially available compounds and with ease of purification. Strong hydrogen-bonding side groups on the polymer produced sharp coil-to-globule transitions upon cooling below its UCST. Ideal random copolymers produced with butyl methacrylate also showed flat UCST profiles, in which the UCST increased with a greater butyl methacrylate copolymer composition from 7 to 65 °C. In the presence of NaCl, the UCST decreased linearly with NaCl concentration due to the "salting-in" effect, and it was found that the slopes from the linear decrease of UCST were nearly identical for all copolymer compositions. This new polymer and its copolymers support the hypothesis that strong hydrogen bonding between the side groups allowed the flat UCST to be readily tuned with a high level of predictability. We postulate that this polymer system may provide wide biological applicability similar to that found for the well-used flat lower critical solution temperature (LCST) of poly(N-isopropylacrylamide).

A novel monomer, N‐(2‐((3‐morpholine‐3‐isopropyl)thio)ethyl)methacrylamide (MTMA), is synthesized and polymerized by reversible addition‐fragmentation chain transfer (RAFT) polymerization to give a thermoresponsive polymer poly[N‐(2‐((3‐morpholino‐3‐oxopropyl)thio)ethyl)methacrylamide] (PMTMA). PMTMA exhibits reversible thermoresponsive phase transitions of the lower critical solution temperature (LCST) type in water and the upper critical solution temperature (UCST) type in ethanol and methanol. The degree of polymerization and concentration of PMTMA, and solvent type have a significant influence on the transition temperature. PMTMA shows complicated thermoresponse in water–alcohol mixtures. In water–ethanol mixtures, the phase diagram of PMTMA can be divided into three regions according to ethanol volume percentages, φ: 0 ≤ φ &lt; 15% for an LCST region; 15% ≤ φ &lt; 91.5% for a complete dissolution region; 91.5% ≤ φ ≤ 100% for a UCST region. At high water content, the LCST increases with increasing ethanol content; and at high ethanol content, the UCST decreases with increasing water content. In water–methanol mixtures, PMTMA shows more complex thermoresponse. In the range of 0–50 °C, the phase diagram can be divided into five regions, depending on the methanol volume percentages φ: 0 ≤ φ &lt; 15% for LCST region; 15% ≤ φ &lt; 25% for immiscible region; 25% ≤ φ &lt; 85% for UCST region; 85% ≤ φ &lt; 95% for fully dissolved region; 95% ≤ φ ≤ 100% for another UCST region.

ABSTRACTHydrophilic biocompatible surfaces can be obtained by grafting stimuli‐sensitive polymers onto commercially available medical devices. Thermo and pH‐responsive polymers are two of the most studied materials due to their potential application as drug delivery systems. Poly(N‐vinylcaprolactam) has a lower critical solution temperature (LCST) near to physiological temperature. However, when it is grafted with pH‐sensitive moieties its LCST it is affected undergoing remarkable displacements. We studied the effect of acrylic acid (AAc), 4‐vinylpyridine (4VP), and 1‐vinylimidazole (Vim) on the LCST of N‐vinylcaprolactam (NVCL) grafted onto silicone rubber (SR), and SR‐g‐NVCL (32.5 °C). The binary graft copolymers were obtained by ionizing grafting radiation using the simultaneous technique; the samples were characterized by Fourier transform infrared attenuated total reflectance (FTIR‐ATR), cross‐polarization magic angle spinning nuclear magnetic resonance (CP/MAS 13C‐NMR), and thermogravimetrical analysis (TGA). LCST value was dramatically affected by the comonomer content; even it was observed the switching from LCST to upper critical solution temperature (UCST) for (SR‐g‐NVCL)‐g‐AAc and (SR‐g‐NVCL)‐g‐4VP samples. The observed behavior is rarely reported for binary graft copolymers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48170.

The kinetics of water transfer between the lower critical solution temperature (LCST) and upper critical solution temperature (UCST) thermoresponsive blocks in about 10 nm thin films of a diblock copolymer is monitored by in situ neutron reflectivity. The UCST‐exhibiting block in the copolymer consists of the zwitterionic poly(4‐((3‐methacrylamidopropyl)dimethylammonio)butane‐1‐sulfonate), abbreviated as PSBP. The LCST‐exhibiting block consists of the nonionic poly(N‐isopropylacrylamide), abbreviated as PNIPAM. The as‐prepared PSBP80‐b‐PNIPAM400 films feature a three‐layer structure, i.e., PNIPAM, mixed PNIPAM and PSBP, and PSBP. Both blocks have similar transition temperatures (TTs), namely around 32 °C for PNIPAM, and around 35 °C for PSBP, and with a two‐step heating protocol (20 °C to 40 °C and 40 °C to 80 °C), both TTs are passed. The response to such a thermal stimulus turns out to be complex. Besides a three‐step process (shrinkage, rearrangement, and reswelling), a continuous transfer of D2O from the PNIPAM to the PSBP block is observed. Due to the existence of both, LCST and UCST blocks in the PSBP80‐b‐PNIPAM400 film, the water transfer from the contracting PNIPAM, and mixed layers to the expanding PSBP layer occurs. Thus, the hydration kinetics and thermal response differ markedly from a thermoresponsive polymer film with a single LCST transition.

A new family of the thermo-responsive polymers based on poly[N-(4-vinylbenzyl)-N,N-dialkylamine] with the pendent amine group as well as the doubly thermo-responsive triblock copolymer were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization. These polymers showed the lower critical solution temperature (LCST) and/or the upper critical solution temperature (UCST) in alcohol and in the alcohol/water mixture. The polymer molecular weight, the polymer concentration, the cosolvent/nonsolvent and the deuterated solvent affecting the LCST and/or UCST were investigated, and their great influence on the LCST/UCST was demonstrated. The origin of the phase transition of poly[N-(4-vinylbenzyl)-N,N-dialkylamine] at LCST upon heating was investigated and the possible reason was proposed. The doubly thermo-responsive triblock copolymer of PVMA53-b-PVEA108-b-PVMA53 underwent phase transition at two LCST temperatures. The PVEA108 block underwent the initial phase transition at the first LCST of 32.5 °C to form core–corona micelles, and then the subsequent phase transition of the PVMA53 block took place at the second LCST of 54.5 °C to produce corona-collapsed micelles. The proposed polymers based on poly[N-(4-vinylbenzyl)-N,N-dialkylamine] are anticipated to broaden the thermo-responsive polymer range and will be useful in polymer science.

"Schizophrenic" diblock copolymers containing nonionic and zwitterionic blocks were prepared with well-controlled molecular weights via atom-transfer radical polymerization (ATRP). In this work, we report a systematic study of how morphological changes of poly(N-isopropylacrylamide)-block-poly(sulfobetaine methacrylate) (PNIPAAm-b-PSBMA) copolymers affect hemocompatibility in human blood solution. The "schizophrenic" behavior of PNIPAAm-b-PSBMA was observed by (1)H NMR, dynamic light scattering (DLS), and turbidity measurement with double morphological transition, exhibiting both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) in aqueous solution. Below the UCST of PSBMA block, micelles were obtained with a core of insoluble PSBMA association and a shell of soluble PNIPAAm, whereas the opposite micelle structure was observed above the LCST of PNIPAAm block. In between the UCST and LCST, unimers with both soluble blocks were detected. Hydrodynamic size of prepared polymers and copolymers is determined to illustrate the correlations between intermolecular nonionic/zwitterionic associations and blood compatibility of PNIPAAm, PNIPAAm-b-PSBMA, and PSBMA suspension in human blood. Human fibrinogen adsorption onto the PNIPAAm-b-PSBMA copolymers from single-protein solutions was measured by DLS to determine the nonfouling stability of copolymer suspension. The new nonfouling nature of PNIPAAm-b-PSBMA copolymers was demonstrated to show extremely high anticoagulant activity and antihemolytic activity in human blood over a wide range of explored temperatures from 4 to 40 °C. The temperature-independent blood compatibility of nonionic/zwitterionic block copolymer along with their schizophrenic phase behavior in aqueous solution suggests their potential in blood-contacting applications.

Effects of polydispersity on liquid–liquid equilibrium of polymeric fluids

The phase transition temperatures (Tp) of poly(N-isopropylacrylamide-co-2-acrylamidoglycolic acid) (P(NIPAAm-co-AmGc)) and P(NIPAAm-co-AmGc)/poly(dimethylaminoethyl methacrylate) (PDMAEMA) complex were monitored to investigate the effects of pH, comonomer composition, and complex formation. P(NIPAAm-co-AmGc) was synthesized via free radical polymerization with AmGc molar fractions of 0.04, 0.08, 0.16, and 0.25; the corresponding ratios of dimethylaminoethyl methacrylate (DMAEMA) and AmGc in the P(NIPAAm-co-AmGc)-16/PDMAEMA complex were 0.3, 0.7, 1.0, 2.0, and 4.0, respectively. Our results indicated that the Tp of P(NIPAAm-co-AmGc) increased as the mole fraction of AmGc increased and was higher at pH 4 than at pH 3 and pH 7. For the P(NIPAAm-co-AmGc)-16/PDMAEMA complex, the lower critical solution temperature (LCST) was observed from 23 to 48 °C, and the upper critical solution temperature (UCST) was detected above 63 °C at pH values of 3, 4, and 7. The aggregation rate of the polymer chains was determined from the slope of the turbidity change in a plot of LCST versus temperature. As the Tp was lower, aggregation occurred faster in P(NIPAAm-co-AmGc)-16 but slower in the P(NIPAAm-co-AmGc)-16/PDMAEMA complex at pH 7. Aggregation was not observed during the cooling scan or, at least, was less evident than in the heating scan because the hydrophobic attractive interactions during the cooling scan were not sufficient to offset the electrostatic repulsion between ionic groups at high temperatures.

The effects of an electric field on upper critical solution temperature (UCST) phase separation and crystallization behavior in binary blends of poly(vinylidene fluoride) (PVDF) and poly(methyl methacrylate) (PMMA) were investigated by means of time-resolved small-angle light scattering (SALS) and polarizing optical microscopy (POM). The lower critical solution temperature (LCST) phase separation curve of this blend could not be measured experimentally due to thermal decomposition caused by too high LCSTs. However, the UCST-type phase separation curve was observed from SALS measurements to shift toward higher temperatures under the electric field. In the temperature range above the UCST (150 °C ≤ T ≤ 158 °C), the electric field reduces the overall crystallization rate in the neat PVDF and, in contrast, increases the crystallization rate in 95/5, 90/10, and 85/15 PVDF/PMMA blends. In the temperature range below the UCST (130 °C ≤ T ≤ 143 °C), the electric field also increased the overall crystallization rate in the 80/20 and 70/30 PVDF/PMMA blends. POM images were also used to investigate the effect of the electric field on the overall melt-crystallization rate, nucleation rate, and crystalline morphology in PVDF/PMMA blends.

Chapter 2 - Thermoresponsive polymers: Phase behavior, drug delivery, and biomedical applications

Chapter 15 - Thermoresponsive polymers and polymeric composites