DrsNet: Dual-resolution Semantic Segmentation with Rare Class-Oriented Superpixel Prior.

In this paper, the Convolutional Neural Network (CNN) architecture, which is one of the deep learning architectures, is used to classify the basic circuit components drawn by hand. During the training and testing stages of the model, a new dataset containing images of 863 circuit components manually drawn by different people is created. The data set contains images of four different classes of circuit components such as resistor, inductor, capacitor and voltage source. All images have been fixed to the same size and converted to grayscale to increase recognition performance and reduce process complexity. In the study, training for four classes is performed with CNN architecture. Based on the CNN architecture, four new CNN models are employed with different the number of layers. The training and validation results of these models are compared separately, the model with the highest training and validation performance is observed with four layer CNN model (CNN-4). This model obtained 84.41% accuracy rate at classification task.

The Part 1 prequel to this review evaluated the evolution of modelling techniques used in evaluation of fruit quality over the past three decades and noted a progression towards the use of artificial neural networks (ANNs) and convolutional neural networks (CNNs). In this review, Part 2, the use of CNNs for NIR fruit quality evaluation is explored, given the success of CNNs in various other fields, such as image, video, speech, and audio processing, and the availability of large (open source) datasets of fruit spectra and reference quality attribute, which is required for the training of CNN models. The review provides an overview of deep learning and the CNN architectures and techniques used in NIR spectroscopy for regression modelling, with advantages and disadvantages identified. Studies using CNN for NIR based fruit quality evaluation are then critically examined. Eight publications have presented on models using the same open-source mango dry matter calibration and test set, enabling inter-method comparisons. CNN models have been demonstrated to be accurate, precise and robust. Techniques of transfer learning for CNN models offer an alternative solution to model updating and calibration transfer methods applied in traditional chemometrics. The review has highlighted crucial areas that require resolution and exploration in this application through future research, including, (i) data requirements for training a CNN (ii) optimal spectral pre-processing for CNN (iii) CNN architecture and hyper-parameter selection and tuning for fruit quality evaluation (iv) CNN model interpretability and explainability. Future studies must conduct clearer comparison to partial least squares (PLS) regression and shallow ANNs to better assess the prospective benefit of using CNN, a more complex model. The potential for visualisation of spectra relevance to the CNN model using techniques such as GradCam, currently employed in visualising 2D-CNN models, remains to be explored.

Retrieval and classification of disaster scenes under complex environmental conditions remain challenging tasks for UAV-based emergency response systems due to large-scale variations, cluttered backgrounds, and heterogeneous damage patterns. To address these challenges, this paper proposes a hybrid late-fusion framework that integrates global and local Convolutional Neural Network (CNN) models for UAV-based disaster image classification. The global CNN is designed to capture scene-level contextual information from entire UAV images, while the local CNN focuses on extracting fine-grained spatial details related to localized damage patterns. The outputs of both models are fused at the decision level to enhance classification robustness. Experiments conducted on a real-world UAV dataset demonstrate that the proposed hybrid framework achieves an F1-score of 0.85, outperforming individual CNN models in terms of balanced precision and recall. The results confirm that integrating global contextual features with local structural details provides a robust and effective solution for UAV-based disaster image classification, particularly for post-disaster analysis and decision-support systems.

Empirical-statistical Downscaling (SD) techniques are valuable tools able to generate high-resolution climate information needed to carry out impact studies. In this regard, Convolutional Neural Networks (CNNs) are promising SD techniques capable of handling large amounts of data and extracting relevant predictor information for each particular site. These characteristics of the CNN represent a major advantage over traditional SD methods, which typically rely on human-guided predictor selection. Notwithstanding, an adequate tuning of the CNN is key for optimising their potential.In southern South America (SSA), CNNs has proven to be skilful in representing daily extreme temperatures and extrapolating into future scenarios. Although the selection of the activation function introduces a source of uncertainty in the future projections. In this context, this study aims to explore the use of CNNs as a statistical downscaling tool to simulate the wet bulb temperature (Tw) over SSA, a multivariate heat-stress index estimated from temperature and humidity. Tw has been widely used as a heat-stress proxy in different parts of the world, however, its characterisation and modelling in SSA remain as a pending task. To this end, four different CNN architectures regarding the activation function (ReLU or linear), domain size and configuration of the CNN layers were tested. All CNN models were trained during summer days using a cross-validation (CV) scheme in the period 1991-2020 and then evaluated in four unseen summers between 2021 and 2024. For comparison purposes, CNN models were similarly trained and validated to simulate maximum temperature (Tx). Overall, CNN models well represented all the features evaluated, including the heat-waves that took place in the summers evaluated independently. In particular, CNN models presents a better performance in simulating Tw than Tx with smaller errors in terms of mean and extremes aspects. Regarding the domain size, for both temperatures, the configuration with the smaller domain yields the best results. Also in this latter case, the reduction of the number of filter size in the last layer slightly improves the representation of Tx. When considering the large domain, the differences between the CNNs based on different activation functions increase, and CNN models with linear configuration outperform the ones with ReLu. The findings of this work reinforces the potential of CNNs for climate downscaling in SSA, especially for its use to simulate multivariate impact indices.

Bangla handwritten character recognition is a popular research topic as its difficulty is higher than the recognition of other languages because of multiple formats of compound characters. State of the art Convolutional neural network (CNN) architectures are very much useful in computer vision applications. Some works have been carried out in Bangla handwritten character recognition but most of them either not very efficient or they can not classify a lot of characters. In this work, state of art pre-trained CNN architectures is used to classify 231 different Bangla handwritten characters using CMATERdb dataset. The images were first converted to B&W form with white as the foreground color. The size of the images is reduced to 28 × 28 form. These images are used as input to the CNN architectures. The weights of the state-of-the-art CNN models are kept as it was. The training learning rate was set to 0.001 and categorical cross-entropy as the error function. After 50 epochs, InceptionResNetV2 achieved the best accuracy (96.99%). DenseNet121 and InceptionNetV3 also provided remarkable recognition accuracy (96.55 and 96.20%, respectively). We also considered combination of trained InceptionResNetV2, InceptionNetV3 and DenseNet121 architectures which provided better recognition accuracy (97.69%) than other single CNN architectures but it is not feasible for using as it requires a lot of computation power and memory. The models were tested in the cases where characters look confusing to humans, but all the architectures showed equal capability in recognizing these images. Considering computational complexity, memory and capability of recognizing confused characters, InceptionResNetV2 can be said as the best performing model.

Text recognition in natural scene images is a challenging problem in computer vision. Different than the optical character recognition (OCR), text recognition in natural scene images is more complex due to variations in text size, colors, fonts, orientations, complex backgrounds, occlusion, illuminations and uneven lighting conditions. In this paper, we propose a segmentation-free method based on a deep convolutional recurrent neural network to solve the problem of cursive text recognition, particularly focusing on Urdu text in natural scenes. Compared to the non-cursive scripts, Urdu text recognition is more complex due to variations in the writing styles, several shapes of the same character, connected text, ligature overlapping, stretched, diagonal and condensed text. The proposed model gets a whole word image as an input without pre-segmenting into individual characters, and then transforms into the sequence of the relevant features. Our model is based on three components: a deep convolutional neural network (CNN) with shortcut connections to extract and encode the features, a recurrent neural network (RNN) to decode the convolutional features, and a connectionist temporal classification (CTC) to map the predicted sequences into the target labels. To increase the text recognition accuracy further, we explore deeper CNN architectures like VGG-16, VGG-19, ResNet-18 and ResNet-34 to extract more appropriate Urdu text features, and compare the recognition results. To conduct the experiments, a new large-scale benchmark dataset of cropped Urdu word images in natural scenes is developed. The experimental results show that the proposed deep CRNN network with shortcut connections outperform than other network architectures. The dataset is publicly available and can be downloaded from <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://data.mendeley.com/datasets/k5fz57zd9z/1</uri> .

Recognition of human activity based on convolutional neural network has received the interest of researchers in recent years due to its significant improvement in accuracy. A large number of algorithms based on the deep learning approach have been proposed for activity recognition purpose. However, with the increasing advancements in technologies having limited computational resources, it needs to design an efficient deep learning-based approaches with improved utilization of computational resources. This paper presents a simple and efficient 2-Dimensional convolutional neural network (2-D CNN) architecture with very small size convolutional kernel for human activity recognition. The merit of the proposed CNN architecture over standard deep learning architectures is fewer trainable parameters and lesser memory requirement which enables it to train the proposed CNN architecture on low GPU memory-based devices and also works well with smaller as well as larger size datasets. The proposed approach consists of mainly four stages: namely (1) creation of dataset and data augmentation, (2) designing 2-D convolutional neural network (CNN) architecture, (3) the proposed 2-D CNN architecture trained from scratch up to optimum stage, and (4) evaluation of the trained 2-D CNN architecture. To illustrate the effectiveness of the proposed architecture several extensive experiments are conducted on three publicly available datasets, namely IXMAS, YouTube, and UCF101 dataset. The results of the proposed method and its comparison with other state-of-the-art methods [8-12,14,18-26,29-33] demonstrate the usefulness of the proposed method.

In this paper, we study the performance of variants of well-known Convolutional Neural Network (CNN) architectures on different audio tasks. We show that tuning the Receptive Field (RF) of CNNs is crucial to their generalization. An insufficient RF limits the CNN's ability to fit the training data. In contrast, CNNs with an excessive RF tend to over-fit the training data and fail to generalize to unseen testing data. As state-of-the-art CNN architectures - in computer vision and other domains - tend to go deeper in terms of number of layers, their RF size increases and therefore they degrade in performance in several audio classification and tagging tasks. We study well-known CNN architectures and how their building blocks affect their receptive field. We propose several systematic approaches to control the RF of CNNs and systematically test the resulting architectures on different audio classification and tagging tasks and datasets. The experiments show that regularizing the RF of CNNs using our proposed approaches can drastically improve the generalization of models, out-performing complex architectures and pre-trained models on larger datasets. The proposed CNNs achieve state-of-the-art results in multiple tasks, from acoustic scene classification to emotion and theme detection in music to instrument recognition, as demonstrated by top ranks in several pertinent challenges (DCASE, MediaEval).

Every year, new Convolutional Neural Network (CNN) architectures appear to deal with different problems in the activity of image and video recognition. These architectures usually work along the ImageNet dataset for looking for the best performance of the CNNs without taking into account the video task where they are used. This can represent a problem if the task is Human Action Recognition (HAR) in video, since the CNN architectures are pre-trained with an image dataset that can practically contain any object, while HAR problem requires consecutive frames of people doing actions. To prove the idea that using CNNs pre-trained on an image dataset does not always achieve the best performance on a video dataset and that, therefore, it is worth comparing the performance of different CNNs under similar circumstances for the HAR problem, this work proposes an analysis between eight different CNN architectures. Each one of the CNN was exclusively trained with RGB images, which were extracted from the frames of the different classes of videos of HMDB51 dataset. To make the classification of an activity in video, we average the predictions taking into account the successes. We also made some ensembles with the best performance CNNs to measure the improvement in accuracy. Our results suggest that Xception is a strong baseline model that could be used by the community to make their comparisons of their proposals more robust.

Handwritten digit recognition, a task in computer vision, is critical for applications such as postal automation, banking, and digitization of forms. Traditional approaches have leveraged statistical models, but the rise of deep learning, particularly Convolutional Neural Networks (CNN) and Long-Short Term Memory (LSTM), has revolutionized the field. However, a comprehensive performance comparison of CNN and LSTM architectures in the context of handwritten digit classification remains underexplored. This study aimed to address this gap by evaluating and comparing CNN and LSTM models for the classification of handwritten digits. Two machine learning models – Convolutional Neural Network (CNN) and Long-Short Term Memory (LSTM) were trained with the preprocessed handwritten digit dataset. The CNN model was designed with multiple convolutional and pooling layers, along with dropout for regularization. The LSTM model was designed with LSTM layers to capture sequential patterns in the data, followed by a dense layer for classification. The models were implemented in python, evaluated and compared based on accuracy, precision, recall and F1-score. The evaluation and comparison results indicate that CNN achieved 99.31% accuracy, 99.0% precision, 99.0% recall, and a 99.0% F1-score, while LSTM achieved 98.90% accuracy, 99.0% precision, 99.0% recall, and a 99.0% F1-score. The results demonstrated that CNN outperformed LSTM in terms of accuracy and misclassification errors, making it the optimal choice for image-based handwritten digit recognition. This finding underscores the efficiency of CNN in addressing challenges related to digit recognition, contributing to the advancement of automated digit classification systems and improving the accuracy of image-based classification tasks.

The prediction of breeding values and phenotypes is of central importance for both livestock and crop breeding. In this study, we analyze the use of artificial neural networks (ANN) and, in particular, local convolutional neural networks (LCNN) for genomic prediction, as a region-specific filter corresponds much better with our prior genetic knowledge on the genetic architecture of traits than traditional convolutional neural networks. Model performances are evaluated on a simulated maize data panel (n = 10,000; p = 34,595) and real Arabidopsis data (n = 2,039; p = 180,000) for a variety of traits based on their predictive ability. The baseline LCNN, containing one local convolutional layer (kernel size: 10) and two fully connected layers with 64 nodes each, is outperforming commonly proposed ANNs (multi layer perceptrons and convolutional neural networks) for basically all considered traits. For traits with high heritability and large training population as present in the simulated data, LCNN are even outperforming state-of-the-art methods like genomic best linear unbiased prediction (GBLUP), Bayesian models and extended GBLUP, indicated by an increase in predictive ability of up to 24%. However, for small training populations, these state-of-the-art methods outperform all considered ANNs. Nevertheless, the LCNN still outperforms all other considered ANNs by around 10%. Minor improvements to the tested baseline network architecture of the LCNN were obtained by increasing the kernel size and of reducing the stride, whereas the number of subsequent fully connected layers and their node sizes had neglectable impact. Although gains in predictive ability were obtained for large scale data sets by using LCNNs, the practical use of ANNs comes with additional problems, such as the need of genotyping all considered individuals, the lack of estimation of heritability and reliability. Furthermore, breeding values are additive by design, whereas ANN-based estimates are not. However, ANNs also comes with new opportunities, as networks can easily be extended to account for additional inputs (omics, weather etc.) and outputs (multi-trait models), and computing time increases linearly with the number of individuals. With advances in high-throughput phenotyping and cheaper genotyping, ANNs can become a valid alternative for genomic prediction.

With the development of deep learning technology, an enormous number of convolutional neural network (CNN) models have been proposed to address the challenging building extraction task from very high-resolution (VHR) remote sensing images. However, searching for better CNN architectures is time-consuming, and the robustness of a new CNN model cannot be guaranteed. In this paper, an improved boundary-aware perceptual (BP) loss is proposed to enhance the building extraction ability of CNN models. The proposed BP loss consists of a loss network and transfer loss functions. The usage of the boundary-aware perceptual loss has two stages. In the training stage, the loss network learns the structural information from circularly transferring between the building mask and the corresponding building boundary. In the refining stage, the learned structural information is embedded into the building extraction models via the transfer loss functions without additional parameters or postprocessing. We verify the effectiveness and efficiency of the proposed BP loss both on the challenging WHU aerial dataset and the INRIA dataset. Substantial performance improvements are observed within two representative CNN architectures: PSPNet and UNet, which are widely used on pixel-wise labelling tasks. With BP loss, UNet with ResNet101 achieves 90.78% and 76.62% on IoU (intersection over union) scores on the WHU aerial dataset and the INRIA dataset, respectively, which are 1.47% and 1.04% higher than those simply trained with the cross-entropy loss function. Additionally, similar improvements (0.64% on the WHU aerial dataset and 1.69% on the INRIA dataset) are also observed on PSPNet, which strongly supports the robustness of the proposed BP loss.

Covid-19 first occurred in Wuhan, China in December 2019. Subsequently, the virus spread throughout the world and as of June 2020 the total number of confirmed cases are above 4.7 million with over 315,000 deaths. Machine learning algorithms built on radiography images can be used as a decision support mechanism to aid radiologists to speed up the diagnostic process. The aim of this work is to conduct a critical analysis to investigate the applicability of convolutional neural networks (CNNs) for the purpose of COVID-19 detection in chest X-ray images and highlight the issues of using CNN directly on the whole image. To accomplish this task, we use 12-off-the-shelf CNN architectures in transfer learning mode on 3 publicly available chest X-ray databases together with proposing a shallow CNN architecture in which we train it from scratch. Chest X-ray images are fed into CNN models without any preprocessing to replicate researches used chest X-rays in this manner. Then a qualitative investigation performed to inspect the decisions made by CNNs using a technique known as class activation maps (CAM). Using CAMs, one can map the activations contributed to the decision of CNNs back to the original image to visualize the most discriminating region(s) on the input image. We conclude that CNN decisions should not be taken into consideration, despite their high classification accuracy, until clinicians can visually inspect and approve the region(s) of the input image used by CNNs that lead to its prediction.

Simple SummaryThe assistance of computer image analysis that automatically identifies tissue or cell types has greatly improved histopathologic interpretation and diagnosis accuracy. In this paper, the Convolutional Neural Network (CNN) has been adapted to predict and classify lymph node metastasis in breast cancer. We observe that image resolutions of lymph node metastasis datasets in breast cancer usually are quite smaller than the designed model input resolution, which defects the performance of the proposed model. To mitigate this problem, we propose a boosted CNN architecture and a novel data augmentation method called Random Center Cropping (RCC). Different from traditional image cropping methods only suitable for resolution images in large scale, RCC not only enlarges the scale of datasets but also preserves the resolution and the center area of images. In addition, the downsampling scale of the network is diminished to be more suitable for small resolution images. Furthermore, we introduce attention and feature fusion mechanisms to enhance the semantic information of image features extracted by CNN. Experiments illustrate that our methods significantly boost performance of fundamental CNN architectures, where the best-performed method achieves an accuracy of 97.96% ± 0.03% and an Area Under the Curve (AUC) of 99.68% ± 0.01% in Rectified Patch Camelyon (RPCam) datasets, respectively.(1) Purpose: To improve the capability of EfficientNet, including developing a cropping method called Random Center Cropping (RCC) to retain the original image resolution and significant features on the images’ center area, reducing the downsampling scale of EfficientNet to facilitate the small resolution images of RPCam datasets, and integrating attention and Feature Fusion (FF) mechanisms with EfficientNet to obtain features containing rich semantic information. (2) Methods: We adopt the Convolutional Neural Network (CNN) to detect and classify lymph node metastasis in breast cancer. (3) Results: Experiments illustrate that our methods significantly boost performance of basic CNN architectures, where the best-performed method achieves an accuracy of 97.96% ± 0.03% and an Area Under the Curve (AUC) of 99.68% ± 0.01% on RPCam datasets, respectively. (4) Conclusions: (1) To our limited knowledge, we are the only study to explore the power of EfficientNet on Metastatic Breast Cancer (MBC) classification, and elaborate experiments are conducted to compare the performance of EfficientNet with other state-of-the-art CNN models. It might provide inspiration for researchers who are interested in image-based diagnosis using Deep Learning (DL). (2) We design a novel data augmentation method named RCC to promote the data enrichment of small resolution datasets. (3) All of our four technological improvements boost the performance of the original EfficientNet.

Background and objectiveEfficiently capturing the severity of positive valence symptoms could aid in risk stratification for adverse outcomes among patients with psychiatric disorders and identify optimal treatment strategies for patient subgroups. Motivated by the success of convolutional neural networks (CNNs) in classification tasks, we studied the application of various CNN architectures and their performance in predicting the severity of positive valence symptoms in patients with psychiatric disorders based on initial psychiatric evaluation records.MethodsPsychiatric evaluation records contain unstructured text and semi-structured data such as question–answer pairs. For a given record, we tokenise and normalise the semi-structured content. Pre-processed tokenised words are represented as one-hot encoded word vectors. We then apply different configurations of convolutional and max pooling layers to automatically learn important features from various word representations. We conducted a series of experiments to explore the effect of different CNN architectures on the classification of psychiatric records.ResultsOur best CNN model achieved a mean absolute error (MAE) of 0.539 and a normalized MAE of 0.785 on the test dataset, which is comparable to the other well-known text classification algorithms studied in this work. Our results also suggest that the normalisation step has a great impact on the performance of the developed models.ConclusionsWe demonstrate that normalisation of the semi-structured contents can improve the MAE among all CNN configurations. Without advanced feature engineering, CNN-based approaches can provide a comparable solution for classifying positive valence symptom severity in initial psychiatric evaluation records. Although word embedding is well known for its ability to capture relatively low-dimensional similarity between words, our experimental results show that pre-trained embeddings do not improve the classification performance. This phenomenon may be due to the inability of word embeddings to capture problem specific contextual semantic information implying the quality of the employing embedding is critical for obtaining an accurate CNN model.