Dynamic Multiple Junction Selection Based Routing Protocol for VANETs in City Environment

Vehicular Ad Hoc Networks (VANETs) are based on network technology where cars act as mobile nodes to form a communication network. In VANETs, routing protocols have a significance regarding the overall network performance since they determine the way of sending and receiving packets between mobile nodes. Most of the protocols proposed for VANETs are adapted from Mobile ad hoc networks (MANETs) routing protocols. However, due to the specific characteristics of VANETs, especially high mobility, and dynamic topology, the routing protocols in ad hoc networks do not adapt immediately to VANETs. Therefore, secure routing of Vehicular ad hoc networks (VANETs) against attacks, which are of various types, is still a challenging issue. This paper is going to present a synthesis of the most relevant protocols that have addressed the secure routing issue in VANETs. It also establishes a comparison regarding the offered features and the studied performance aspects through which it is notified that a security mechanism depends not only on the level of efficiency but also on the network constraints.

Kinetic mobility management applied to vehicular ad hoc network protocols

Vehicular Ad-hoc NETwork (VANET) is a subcategory of Mobile Ad-hoc NETwork (MANET) which is one of the popular emerging research areas. On one side increase in the number of vehicles, and on the other side due to the presence of communication unit i.e. On Board Unit (OBU) in vehicles helped in the creation of a new network called as VANET. VANET is becoming so popular that it is widely used for different applications that may be safety or non-safety applications. An effective routing protocol is required for the efficient use of VANET for different applications which can optimize different generic parameters of VANET like end-to-end delay, number of hops, etc. Altough multiple paths exist between a source and a destination but the routing protocols evaluate a single path for the transmission of information packets based on parameters like shortest distance towards the destination, density of vehicles, number of hops, etc. Different swarm intelligence techniques like Ant Colony Optimization (ACO), Particle Swarm Optimization (PSO), etc. can be used in VANET to optimize the parameters used in the routing protocol. In this chapter, Ant Colony Optimization (ACO) is used to establish multiple routes between nodes which is vital in the network where network connectivity is random and is frequently changing. This also helps in the parallel transmission of packets in multi-path which reduces end-to-end delay. For this proposed work, a variation of end-to-end delay with respect to transmission distance and a number of vehicles is compared with the existing VANET routing protocol i.e. Geographic Source Routing (GSR), Anchor based Street Traffic Aware Routing (A-STAR). The comparison shows that the proposed work performs better as compared to GSR and A-STAR. To implement multi-path routes MongoDB—an open source distributed database is used and the corresponding operation on the database is implemented using node-red. Selection of effective route and intermediate hop for the transmission of emergency information is essential. The optimized route in VANET not only saves the overall transmission time but also reduces the end-to-end delay. For the optimization of route and number of hops in VANET, another swarm intelligence technique i.e. Particle Swarm Intelligence (PSO) can be used through which the transmission of emergency information with optimum delay is proposed.

Vehicular communication ad hoc routing protocols: A survey

The swift improvement of wireless communication technology has aided the creation of vehicular ad hoc networks (VANETs) as a revolutionary option for the realization of intelligent transportation systems (ITSs). VANETs facilitate seamless communication between vehicles and infrastructure (V2I) and among the vehicles themselves (V2V). These networks can enhance safety and traffic control while providing various infotainment options. To ensure stable and efficient communication in highly dynamic and quickly changing vehicular contexts, effective data packet routing is a crucial component of VANETs. This survey delves further into the VANET routing algorithms for ITS. The study aims to evaluate the effectiveness and acceptability of various routing protocols suggested for VANETs while considering their unique requirements and difficulties. The review covers ad hoc on‐demand distance vector (AODV) and dynamic source routing (DSR), as well as more current strategies designed specifically for VANETs, such as geographic routing, cluster‐based routing, and hybrid routing protocols. The review assesses the routing algorithms based on several vital parameters, including packet delivery ratio (PDR), end‐to‐end delay, throughput, network overhead, scalability, and robustness. This detailed assessment supports aspiring researchers in acquiring a better knowledge of the benefits and drawbacks of the routing algorithms currently used in VANETs.

A stable and reliable routing mechanism for vehicular ad hoc networks (VANETs) is an important step toward the provision of long data transmission applications, such as file sharing and music download. Traditional mobile ad hoc network (MANET) routing protocols are not suitable for VANET because the mobility model and environment of VANET are different from those of traditional MANET. To solve this problem, we proposed a new stable routing algorithm, called stable directional forward routing. The novelty of the proposed routing protocol is its combining direction broadcast and path duration prediction into ad hoc on-demand distance vector routing protocols, which including: (1) Nodes in VANET are grouped based on the position, only nodes in a given direction range participating in the route discovery process to reduce the frequency of flood requests, (2) Route selection is based on the link duration while not the hops or other metrics to increase the path duration, (3) Route discovery is executed before the path expiration in order to decrease the end to end delay. The performance of the new scheme is evaluated through extensive simulations with Qualnet. Simulation results indicate the benefits of the proposed routing strategy in terms of decreasing routing control packet, reducing the number of link-breakage events, improving the packet delivery ratio and decreasing the end-to-end delay.

Vehicular ad hoc network (VANET) is a type of mobile ad hoc network (MANET) that forms vehicles as nodes. Routing is the basic fundamental requirement of VANET applications. Therefore, it is necessary to devise a routing protocol that fits well for rapid topology changes and disconnected network conditions. To address these specific needs of VANET, we present a novel greedy routing protocol for vehicular networks called VRPTA that suite well for both city environment and the high way environment. With the help of localisation system named global positioning system (GPS), the proposed protocol is designed to efficiently relay the data in the network by considering different scenarios like road traffic variation and various environment characteristics. The protocol communicates in between vehicles as well as vehicle to infrastructure whichever is applicable, thereby ensuring reliable transmission. In addition, we also consider the information about vehicles speed, direction and density of a city traffic configuration consisting of double direction roads, multi lanes and highway scenario. The work is implemented using NS2 simulator.

Intelligent Transportation Systems (ITS) is an integrated approach being developed to exchange relevant information to increase the safety and efficiency of the road transportation systems. Vehicular Ad hoc Network (VANET), a variant of mobile ad hoc networks (MANET), is a core component of ITS. Performance of this smart ITS mainly owes to the design of efficient routing protocols in VANETs. Distinct features of VANETs like unsteady connectivity, high mobility and partitioning of the network have made routing of the information in VANETs difficult and challenging, hence dictating the development of efficient routing protocols. The computation of the best route measures the performance of communication whereas routing protocols takes care of communication & routing of the data. Provision of smart communication, necessitates the analysis of routing protocols in VANET. Accordingly in this paper we have reviewed various types of existing routing protocols in VANET, listing their advantages and disadvantages. Lastly possible inclinations of forthcoming research linked to VANET routing are discussed.

Vehicular Ad Hoc Networks (VANETs), a subclass of Mobile Ad Hoc Networks (MANETs), rely on efficient routing protocols to maintain reliable communication in highly dynamic and decentralized environments. While numerous routing strategies have been proposed, their performance varies significantly with the choice of underlying mobility models that simulate real vehicular movement. This study presents a two-phase evaluation of five widely used routing protocols—Ad hoc On-Demand Distance Vector (AODV), Dynamic Source Routing (DSR), Destination-Sequenced Distance Vector (DSDV), Optimized Link State Routing (OLSR), and Geographic Routing Protocol (GRP)—across fourteen realistic mobility models, including the Intelligent Driver Model (IDM), Car-Following Model (CFM), and Lighthill–Whitham–Richards (LWR) model. Simulations are executed using Simulation of Urban Mobility (SUMO), Network Simulator 3 (NS-3), and the Veins framework. The performance is assessed using eight key metrics: Packet Delivery Ratio (PDR), End-to-End Delay (E2ED), Throughput, Jitter, Energy Consumption, Packet Loss Ratio (PLR), Normalized Routing Load (NRL), and Link Breakage Rate (LBR). Among the evaluated protocol–mobility combinations, AODV paired with the CFM model demonstrated comparatively favorable performance under the considered simulation configuration: 93% PDR, 79.4 ms E2ED, 332 kbps throughput, 3.4 ms jitter, 3.48 J energy consumption, 7% PLR, 0.3 NRL, and 5 link breakages per simulation. This study provides a systematic and unified comparative evaluation of five widely used routing protocols across fourteen simulation-based vehicular mobility models. The findings provide scenario-specific comparative insights for simulation-based VANET performance evaluation and offer practical, simulation-based guidance for selecting suitable protocol–mobility model combinations under the evaluated experimental conditions.

Intelligent Transportation System (ITS) is a critical factor for Vehicular Ad hoc Networks (VANET). Even though VANET belongs to the class of Mobile Ad hoc Network (MANET), none of the MANET routing protocol applies to VANET. VANET network is dynamic, due to increased vehicle speed and mobility. Vehicle mobility of VANET affects conventional routing algorithm performance, which deals with the dynamicity of the network node. The evaluation of the existing research stated that Ad hoc On-Demand Distance Vector (AODV) is an effective MANET protocol to adopt network changes for significant resource utilization and also provides effective adaptation in the network change. Due to the effective performance of the AODV protocol, it is considered as an effective routing protocol for VANET. This paper proposed an ad hoc TROPHY (TAD-HOC) routing protocol for the VANET network for increasing efficiency and effective resource utilization of the network. To improve the overall performance, ad hoc network is combined with Trustworthy VANET ROuting with grouP autHentication keYs (TROPHY) protocol. The proposed TAD-HOC protocol transmits data based on time demand in the VANET network with the desired authentication. Results of the proposed approach show the increased performance of the VANET network with packet delay, transmission range, and end-to-end delay. The comparative analysis of the proposed approach with I-AODV, AODV-R, and AODV-L shows that the proposed TAD-HOC exhibited effective performance.

Vehicular Ad hoc Networks (VANETs) that are considered as a subset of Mobile Ad hoc Networks (MANETs) can be applied in the field of transportation especially in Intelligent Transportation Systems (ITS). The routing process in these networks is a challenging task due to rapid topology changes, high vehicle mobility and frequent disconnection of links. Therefore, developing an efficient routing protocol that satisfies restriction of delay and minimum overhead is faced with many difficulties and limitations. Also, the detection of malicious vehicles is a significant task in VANETs. To address these issues, using Unmanned Aerial Vehicles (UAVs) can be helpful to cope with these limitations. In this paper, operation of UAVs in ad hoc mode and their cooperation with vehicles in VANETs are studied to help in the process of routing and detection of malicious vehicles. A routing protocol named VRU is proposed that includes two distinct ways of routing of data: (1) delivering packets of data between vehicles with the help of UAVs using a protocol named VRU_vu, and (2) routing packet of data between UAVs using a protocol named VRU_u. The NS-2.35 simulator under Linux Ubuntu 12.04 is utilized in order to appraise the performance of VRU routing components in an urban scenario. Also, VanetMobiSim generator of mobility and MobiSim are used to produce the motions of vehicles and to produce the motions of UAVs, respectively. The performance analysis displays that VRU protocol can improve the packet delivery ratio by 16% and detection ratio by 7% compared to other reviewed routing protocol. Also, VRU protocol decreases end-to-end delay by an average of 13% and overhead by 40%.

As the automotive and telecommunication industries advance, more vehicles are becoming connected, leading to the realization of intelligent transportation systems (ITS). Vehicular ad-hoc network (VANET) supports various ITS services, including safety, convenience, and infotainment services for drivers and passengers. Generally, such services are realized through data sharing among vehicles and nearby infrastructures or vehicles over multi-hop data routing mechanisms. Vehicular data routing faces many challenges caused by vehicle dynamicity, intermittent connectivity, and diverse application requirements. Consequently, the software-defined networking (SDN) paradigm offers unique features such as programmability and flexibility to enhance vehicular network performance and management and meet the quality of services (QoS) requirements of various VANET services. Recently, VANET routing protocols have been improved using the multilevel knowledge and an up-to-date global view of traffic conditions offered by SDN technology. The primary objective of this study is to furnish comprehensive information regarding the current SDN-based VANET routing protocols, encompassing intricate details of their underlying mechanisms, forwarding algorithms, and architectural considerations. Each protocol will be thoroughly examined individually, elucidating its strengths, weaknesses, and proposed enhancements. Also, the software-defined vehicular network (SDVN) architectures are presented according to their operation modes and controlling degree. Then, the potential of SDN-based VANET is explored from the aspect of routing and the design requirements of routing protocols in SDVNs. SDVN routing algorithms are uniquely classified according to various criteria. In addition, a complete comparative analysis will be achieved to analyze the protocols regarding performance, optimization, and simulation results. Finally, the challenges and upcoming research directions for developing such protocols are widely stated here. By presenting such insights, this paper provides a comprehensive overview and inspires researchers to enhance existing protocols and explore novel solutions, thereby paving the way for innovation in this field.

Vehicular ad-hoc network (VANET) plays a significant role in future intelligent transportation systems. The main objective of vehicular ad hoc networks (VANETs) is to improve driver safety and traffic efficiency. Many researchers proposed different schemes to improve communication efficiency. It is quite challenging where vehicles’ speed, Direction, and density of neighbors on the move are not consistent. Although several routing protocols have been introduced to manage data exchange among vehicles in VANETS, they still suffer from many drawbacks such as lost packets or time penalties. This paper introduced a new Fog Based Routing Strategy, which constructs a reliable system of adaptive, stable, and efficient routing networks. FBRS consists of two main phases: System Setup Phase (SSP) and System Operation Phase (SOP). SSP creates a cluster network, collects its nodes’ data, mining routes between them, and ranking paths using Dijkstra’s algorithm into a simplified table. Although, SOP generates a reliable route between the request of any two nodes for a communication channel and maintains the route against any simultaneous crashes. Recent VANET routing protocols have been compared against FBRS. Experimental results have proven the outperforming of the proposed algorithm against recent routing protocols in terms of packet delivery ratio and routing overhead.

A vehicular ad hoc network (VANET) is a special kind of mobile ad hoc networks (MANET) that supports cooperative driving among communicating cars on the roads. There are several technologies involved in implementation of wireless communication in VANETs. These technologies include 3G cellular systems, long-term evolution (LTE), LTE Advanced, IEEE 802.16, and IEEE 802.11. This chapter focuses on 802.11-based wireless communication in VANETs. It reviews some presented methods for vehicle movement path prediction, and explains some algorithms are explained for performance improvement in opportunistic networks based on the predicted vehicle movements. The chapter considers the fact that communication in VANETs can be infrastructure-based or infrastructureless. It also reviews some methods to apply the predicted vehicles' position for improving communication in infrastructure-based and infrastructureless VANETs, respectively. Opportunistic routing algorithms can be classified according to their dependency on roadside infrastructure. The chapter presents the taxonomy of opportunistic routing in VANETs.

Vehicular Ad-hoc Network (VANET) is a subclass of Mobile Ad-hoc Network (MANET) which provides the safety measure and other different applications to the drivers of the vehicles. The goal of VANET is to fulfil the requirements of users on roadside area, which improves the safe and comfortable journey. Secure routing is the main issue in VANET. Dynamic topology and wireless networking makes the VANET vulnerable to numerous sorts of attacks. Wormhole is one of the extreme assaults in VANET. This type of attack disturbs the working of routing protocol such as Ad hoc On demand Distance Vector (AODV) routing protocol. The motivation of this research work is that by using proposed detection and prevention approach the VANET can be made more secure. The results show how the performance of AODV routing protocol is affected by wormhole. In this research paper the impact of wormhole attack is analysed in terms of throughput, packer delivery ratio, and end-to-end delay. An approach is also proposed to detect and prevent wormhole attack in VANET over a real map on different vehicle densities based on multipath concept.