Dynamically Self-generated Fuzzy Neural Networks with Industry Applications

Over the last decade, an extensive research has been carried out in the areas of fuzzy logic and neural networks. Fuzzy logic has emerged as a mathematical tool to deal with the uncertainties in human perception and reasoning. It also provides a framework for an inference mechanism that allows for approximate human reasoning capabilities to be applied to knowledge-based systems. On the other hand, artificial neural networks have emerged as fast computation tools with learning and adaptivity capabilities. Recently, these two fields have been integrated into a new emerging technology called fuzzy neural networks which combines the benefits of each field. The objective of the paper is to establish the similarities and differences between fuzzy systems and neural networks and to discuss possible models for fuzzy neural networks which can be applied to system modeling and control.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Attempts are being made to enhance the drive performance by intelligent control using fuzzy logic (FL) and neural network techniques. One of the frequently discussed applications of artificial intelligence in control is the replacement of a standard proportional plus integral (PI) speed controller with an FL or artificial neural network (ANN) speed controller. Regardless of all the work, it appears that a thorough comparison of the drive behavior under PI, FL, and ANN speed control is necessary. This article attempts to compare PI, fuzzy, and ANN controllers that are implemented in an embedded system for closed-loop speed control of DC drive fed by a buck-type DC–DC power converter. The PI controller is designed based on the small signal modeling of the system. The PI-like fuzzy controller structure is considered for comparison. Two ANN controllers are designed. One controller uses training data obtained from the simulation of a fuzzy controller and the other uses training data from the simulation of a PI controller. The performance of the controllers is studied for a variety of operating conditions, such as step change in speed command and step change in load torque. The parameters selected for the comparison are the steady-state error and the rise time of the response. It is shown that ANN speed controllers provide a superior speed response in terms of rise time and the steady-state error compared to PI and FL controllers. This advantage arises from the fact that the neural network has the property of generalization and the control surface of the neural controller is smooth. The designed neural network controller is simple, with three neurons only, and so it is best suited for embedded system implementation. It is also found that the ANN controller trained with the training data from a PI controller has a better response compared to the ANN controller trained with data from a fuzzy controller.

Classification of seven kinds of dyeing defects is proposed using image processing and fuzzy neural network approaches. The defects include filling band in shade, dye and carrier spots, mist, oil stain, tailing, listing, and uneven dyeing on selvage. The fuzzy neural classification system is constructed by a fuzzy expert system with the neural network as a fuzzy inference engine. The neural network is trained to become the inference engine using sample data. This fuzzy neural network system possesses merits of both fuzzy logic and neural networks, and thus is more intelligent in handling pattern recognition and classification problems. Region growing is adopted to directly detect different defect regions in an image. In all, seventy samples, ten samples for each defect, are obtained for training and testing. The results demonstrate that the fuzzy neural network approach can precisely classify these samples by the features selected.

Provides an abstract of the presentation and a brief professional biography of the presenter. The complete presentation was not made available for publication as part of the conference proceedings.

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vi

Retraction notice

Many bridges in Taiwan have been in use from the period that Taiwan was governed by the Japanese, over 50 years ago, which is the average ultimate usable lifetime of such structures. Three-quarters of the bridges on major highways have been in use for more than 20 years and numerous bridges on country roads have also been in use for more than 20 years. In other words, most of the bridges in Taiwan are aging and may require repair or replacement. Ambient vibration tests are utilized to measure the response of old bridges, which are difficult to equip with accelerometers. The Fourier transform method is traditionally used to gain important information about ambient vibration records. However, the development of information technology over the last 20 years has meant that there are more kinds of signal management technologies, including the wavelet and Hilbert—Huang transform (HHT) methods. In this study we investigate the characteristics of aging bridges by comparison with their structural properties. We analyze their ambient vibration, and discuss the possible influence of the frequency function. Long-term environmental impacts create many structural problems, but with traditional methods examination of bridge health is difficult. Therefore, in our HHT management system, we examine destroyed bridges. The characteristics and behavior of bridges subjected to random loading can be understood by analysis with the random decrement technique and the frequency response function method.

Retraction notice

Introduction: This paper presents a novel approach for classifying different types of steel rods using a combination of pre-trained convolutional neural networks (CNNs) and fuzzy logic systems. We utilize VGG16, ResNet50, and InceptionV3 models to extract features from grayscale images of steel rods, which are then classified using Support Vector Machines (SVM). Furthermore, we incorporate a fuzzy logic system to improve the final classification accuracy by combining the individual accuracies of each CNN model. Experimental results demonstrate the effectiveness of our approach in achieving high classification accuracy compared to traditional methods. Objectives: This research presents a novel multi-model approach for steel rod classification utilizing three distinct fuzzy logic systems: Fuzzy Recurrent Neural Network (RNN), Fuzzy Convolutional Neural Network (CNN), and Fuzzy Neural Network. The proposed system addresses the critical challenge of accurate defect detection and classification in steel manufacturing processes. By combining these complementary approaches, we achieve enhanced feature extraction capabilities and improved classification accuracy. Experimental results demonstrate that our multi-model system achieves a classification accuracy of 97.8%, surpassing single-model approaches by an average of 8.2%. The system successfully identifies surface defects, structural anomalies, and dimensional variations with high precision, making it suitable for real-time industrial applications. Methods: This paper introduces a novel approach for the feature extraction and classification of steel rods by integrating multiple models and utilizing fuzzy logic systems. The methodology leverages pre-trained convolutional neural networks (CNNs) for extracting comprehensive feature representations from steel rod images. These extracted features are then combined and integrated using fuzzy logic to enhance classification accuracy and reliability. By addressing the limitations of traditional manual inspection methods and single-model approaches, this integrated multi-model system offers a robust solution for real-time industrial implementation. The proposed system aims to improve the efficiency and effectiveness of quality control processes in steel rod manufacturing, ensuring consistent and accurate classification even under varying conditions and complexities. This innovative approach paves the way for more advanced and adaptable automated inspection systems in the industry. Results: The paper aims to develop an integrated multi-model system that combines three distinct fuzzy logic approaches to enhance feature extraction capabilities through complementary methodologies. By improving the classification accuracy and reliability, the system addresses the limitations of existing methods. The goal is to create a robust and adaptable system that is suitable for real-time industrial implementation for steel rod analysis and classification. This comprehensive approach leverages the strengths of multiple models and fuzzy logic techniques, ensuring accurate and efficient classification processes, even under complex and varying conditions. The proposed multi model system is designed to meet the stringent quality control requirements of industrial applications, ultimately improving productivity and product quality through reliable automated inspection and classification for steel rod with accuracy of 97.80%, precision of 97.30% and recall 97.50%. Conclusions: This paper presents a novel approach for the classification of steel rods using a combination of pre-trained CNN models and fuzzy logic systems. The experimental results demonstrate the effectiveness of our method in achieving high classification accuracy. This research demonstrates the effectiveness of a multi-model fuzzy logic approach for steel rod classification. The system achieves significant improvements over single-model approaches while maintaining real-time processing capabilities. Our approach provides a foundation for further research and development in automated industrial image classification.

On the basis of previous research, This article studies the structure and working principle of recurrent fuzzy neural network. The traditional fuzzy controller is not precise enough, does not have simple algorithm but poor timely traceability. The use of the fuzzy neural network is good for fully integrating the fuzzy control feature and neural network control feature. And we can improve the fuzzy neural network into recurrent fuzzy neural network, and apply this in the power flow control of the power converter. Through simulating and contrasting, the experiments show that it can achieve the UPFC trend of dynamic real-time monitoring, it has better tracking control capability and robustness, and preferable effect of power control.

This paper demonstrates that fuzzy logic systems and feedforward neural networks are equivalent in essence. First, we introduce the concept of interpolation representations of fuzzy logic systems and several important conclusions. We then define mathematical model for rectangular wave neural networks and nonlinear neural networks. With this definition, we prove that nonlinear neural networks can be represented by rectangular wave neural networks. Based on this result, we prove the equivalence between fuzzy logic systems and feedforward neural networks. This result provides us a very useful guideline when we perform theoretical research and applications on fuzzy logic systems, neural networks, or neuro-fuzzy systems.

Implementation of fuzzy logic systems and neural networks in industry

Ambiguity is always present in any realistic process. This ambiguity may arise from the interpretation of the data inputs and in the rules used to describe the relationships between the informative attributes. Fuzzy logic provides an inference structure that enables the human reasoning capabilities to be applied to artificial knowledge-based systems. For efficient working the artificial knowledge-based systems depend upon algorithms which are cumbersome to implement and require extensive computational time. On the other hand, the human brain which performs approximate reasoning employs simple information processing elements called neurons. The paradigm of artificial neural networks, developed to emulate some of the capabilities of the human brain, has demonstrated a great potential in terms of learning and adaptation for various applications such as system identification and control, pattern recognition, prediction, etc. They provide low-level computations and embodies salient features such as learning, fault-tolerance, parallelism and generalization. On the other hand, fuzzy logic provides a means for converting linguistic strategy into control actions and thus offering a high-level computation. Although, fuzzy logic and artificial neural networks are both functionally and structurally different, it is envisaged that the synthesis of these two areas will give rise to a new paradigm called fuzzy neural networks. The latter have the potential to capture the benefits of both the fields, fuzzy logic and neural networks, into a single paradigm. The objective of this paper is to describe the basic concepts of fuzzy neural networks. Towards this goal, a fuzzy neural structure based on the notion of T-norm and T-conorm is developed. A fuzzy cellular neural network as applied to image enhancement is also described in this paper.

The fuzzy logic and neural networks are combined in this paper, setting up the fuzzy neural network (FNN); meanwhile, the distinct differences and connections between the fuzzy logic and neural network are compared. Furthermore, the algorithm and structure of the FNN are introduced. In order to diagnose the faults of nuclear power plant, the FNN is applied to the nuclear power plant, and the intelligence fault diagnostic system of the nuclear power plant is built based on the FNN. The fault symptoms and the possibility of the inverted U-tube break accident of steam generator are discussed. In order to test the system’s validity, the inverted U-tube break accident of steam generator is used as an example and many simulation experiments are performed. The test result shows that the FNN can identify the fault.

This paper overviews four combinations of fuzzy logic, neural networks and genetic algorithms: (1) neural networks to auto-design fuzzy systems, (2) employing fuzzy rule structure to construct structured neural networks, (3) genetic algorithms to auto-design fuzzy systems, and (4) a fuzzy knowledge-based system to control genetic parameter dynamically.© (1993) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.