E-navigation Services for Non-SOLAS Ships

The purpose of this study is to propose an approach to fuse multiscale charts into three-dimensional (3D) electronic navigational chart (ENC) systems based on underwater topography and remote sensing image. This is the first time that the fusion of multiscale standard ENCs in the 3D ENC system has been studied. First, a view-dependent visualization technology is presented for the determination of the display condition of a chart. Second, a map sheet processing method is described for dealing with the map sheet splice problem. A process order called “3D order” is designed to adapt to the characteristics of the chart. A map sheet clipping process is described to deal with the overlap between the adjacent map sheets. And our strategy for map sheet splice is proposed. Third, the rendering method for ENC objects in the 3D ENC system is introduced. Fourth, our picking-up method for ENC objects is proposed. Finally, we implement the above methods in our system: automotive intelligent chart (AIC) 3D electronic chart display and information systems (ECDIS). And our method can handle the fusion problem well.

This article presents technology for the production of electronic navigational charts (ENC) in the Hydrographie Institute of the Republic of Croatia (HIRC); current conditions of producing ENC cells and comparison with international experiences. ENC database together with GPS and onboard sensors make up -electronic chart display and information system (ECDIS) navigational GIS. The purpose of ENC and ECDIS is improvement of navigational safety and protection of marine environment. HIRC is participant of the international pilot project "North Adriatic virtual regional electronic nautical chart" (VRENC), deals with standardization in production and distribution of ENCs covering the area of the North Adriatic Sea. In international relations HIRC has a rather satisfying ENC production

The three-dimensional (3D) visualization of the electronic navigation chart (ENC) can reflect the marine environment and various marine features truly, accurately, and directly, to reduce misoperation during chart use and improve the convenience of using the chart. Due to a large amount of ENC data, complex data structure, and uneven distribution in 3D space, the construction and real-time rendering of 3D ENCs depend on the retrieval speed of 3D spatial data. Improving the spatial retrieval efficiency of 3D ENC data is helpful for the rapid rendering of a 3D scene. In this paper, based on the S-100 universal hydrological data model (S-100) and the 3D characteristics to classify the ENC features and create the 3D ENC data set, a hybrid spatial index structure is proposed based on quadtree and R-tree and ENC features data structure, using the smallest minimum bounding box (SMBB) and classification retrieval methods to optimize the spatial index structure. All the ENC features are rendered in a 3D marine scene. By analyzing the overlap of ENC features and testing the efficiency of spatial index structure, the results show that this method can effectively reduce the overlap rate of index nodes and improve the efficiency of data retrieval, realize the effective management of 3D ENC data, and improve the drawing speed of 3D ENCs.

It is seen that high technology and its products work to meet every stage and need of human life and navigational safety in the maritime sector. Electronic systems have been developed and are used today as a result of the search for alternatives to the well-known and approved classical methods used in safe navigation on the world's seas. Electronic systems are susceptible and more accurate than classical methods and significantly benefit maritime transport. Bridge electronic systems and infrastructures supporting its components also work with advanced technology products. In this context, electronic navigational charts - ENC, Electronic Chart Display Information systems - ECDIS and Automatic Information systems - AIS are undoubtedly the best examples. These and similar bridge and auxiliary devices ensure the safety of navigation on both national and international seas and oceans and cause a decrease in human error rates. This study mentions the positive effects of high-tech bridge navigation systems developed in the maritime sector on maritime transportation.

This study introduces an assessment concerning the use of Electronic Chart Display and Information System (ECDIS) in the safe navigation of vessels by considering the case studies whether the device played a role in grounding accidents. A total 80 investigation reports of grounding accidents from 2008 to 2018 were analysed. In 22 cases, one or more findings related to ECDIS and Electronic Navigational Charts (ENC) were identified. Twenty two accidents related to ECDIS or ENCs were re-analysed with 4M Overturned Pyramid (MOP) model to determine the characteristics and causes of accidents. Causative factors that related ECDIS in the cases have been listed and explained. Results indicate that ECDIS-related procedures and lack of training have led to incorrect settings of the device, especially alarm settings. The recommendations have been arranged that ECDIS devices, which offer much considerable information for the safe navigation of ships, are able to work more efficiently.

Electronic navigational charts (ENCs) are geospatial databases compiled in strict accordance with the technical specifications of the International Hydrographic Organization (IHO). Electronic Chart Display and Information System (ECDIS) is a Geographic Information System (GIS) operated by ENCs for real-time navigation at sea, which is one of the key technologies for intelligent ships to realize autonomous navigation, intelligent decision-making, and other functions. Facing the urgent demand for high-precision and real-time nautical chart products for polar navigation under the new situation, the projection of ENCs for polar navigation is systematically analyzed in this paper. Based on the theory of complex functions, we derive direct transformations of Mercator projection, polar Gauss-Krüger projection, and polar stereographic projection. A rational set of dynamic projection options oriented towards polar navigation is proposed with reference to existing specifications for the compilation of the ENCs. From the perspective of nautical users, rather than the GIS expert or professional cartographer, an ENCs visualization idea based on multithread-double buffering is integrated into Polar Region Electronic Navigational Charts software, which effectively solves the problem of large projection distortion in polar navigation applications. Taking the CGCS2000 reference ellipsoid as an example, the numerical analysis shows that the length distortion of the Mercator projection is less than 10% in the region up to 74°, but it is more than 80% at very high latitudes. The maximum distortion of the polar Gauss-Krüger projection does not exceed 10%. The degree of distortion of the polar stereographic projection is less than 1% above 79°. In addition, the computational errors of the direct conversion formulas do not exceed 10−9 m throughout the Arctic range. From the point of view of the computational efficiency of the direct conversion model, it takes no more than 0.1 s to compute nearly 8 million points at 1′×1′ resolution, which fully meets the demand for real-time nautical chart products under information technology conditions.

Nautical cartography competences and their effect to the realisation of a worldwide Electronic Navigational Charts database, the performance of ECDIS and the fulfilment of IMO chart carriage requirements

Cartographic sounding selection is a constraint-based bathymetric generalization process for identifying navigationally relevant soundings for nautical chart display. Electronic Navigational Charts (ENCs) are the premier maritime navigation medium and are produced according to international standards and distributed around the world. Cartographic generalization for ENCs is a major bottleneck in the chart creation and update process, where high volumes of data collected from constantly changing seafloor topographies require tedious examination. Moreover, these data are provided by multiple sources from various collection platforms at different levels of quality, further complicating the generalization process. Therefore, in this work, a comprehensive sounding selection algorithm is presented that focuses on safe navigation, leveraging both the Digital Surface Model (DSM) of multi-source bathymetry and the cartographic portrayal of the ENC. A taxonomy and hierarchy of soundings found on ENCs are defined and methods to identify these soundings are employed. Furthermore, the significant impact of depth contour generalization on sounding selection distribution is explored. Incorporating additional ENC bathymetric features (rocks, wrecks, and obstructions) affecting sounding distribution, calculating metrics from current chart products, and introducing procedures to correct cartographic constraint violations ensures a shoal-bias and mariner-readable output. This results in a selection that is near navigationally ready and complementary to the specific waterways of the area, contributing to the complete automation of the ENC creation and update process for safer maritime navigation.

Electronic navigational charts (ENCs) are geospatial databases, compiled for the operational use of Electronic Chart Display and Information systems (ECDIS) according to strict technical specifications of the International Hydrographic Organization (IHO). ECDIS is a GIS system designed for marine navigation according to the relevant standards of the International Maritime Organization (IMO). The international standards for ENCs and ECDIS, issued by the IHO and IMO, cover many aspects of the portrayal of ENCs in ECDIS but do not specify or recommend map projections. Consequently, in some cases, the unjustified employment of map projections by the manufacturers has caused certain functional drawbacks and inadequacies. This article reviews, evaluates and supplements the results of earlier studies on the selection of map projections for the depiction of ENCs in ECDIS and proposes a reasonable set of suitable projections with pertinent selection/implementation rules. These proposals took into consideration that ECDIS users (navigators) are not GIS experts or professional cartographers and consequently, the proposed election/implementation rules have to be simple and straightforward.

The paper presents the problem of determining a safe ship trajectory in real conditions with the use of information comprised in electronic navigational charts (ENC). Ship trajectory optimisation is one of essential functionalities of decision support systems which are part of intelligent transport systems. An ENC data transformation method herein presented is aimed to reduce the time of creating the numerical terrain model for an optimization problem. Trapezoidal meshes are proposed for this purpose. Water area parameters as well as moving targets are considered. The three dimensional ship domain is used as a safety criterion. The implementation of the presented method is discussed.

현재 육상에서의 GPS는 자동차 항법체계(Car Navigation System)와 개인휴대용 단말기를 이용한 위치정보체계 등이 활발히 활용되고 계속 연구되고 있는 추세에 있지만 해양에서는 그렇지 못한 실정으로 원래 GPS는 선박의 항해용 목적으로 개발된 것이지만, 해상에서 선박의 운항에 정확도는 크게 어려움을 주지 않는다는 이유로 선박의 항로확인을 위한 근사적인 위치의 표현만을 수행해왔다. 최근 항만이 복잡해지고 선박의 증가로 해양에서도 선박의 정밀한 유도가 필요하게 되었다. 본 연구에서는 GPS에서 사용하고 있는 타원체인 WGS84 타원체의 자리좌표를 우리나라에서 사용하고 있는 타원체인 BESSEL 타원체의 지리좌표로 변환하는 요소인 3-parameter에 의한 타원체변환알고리즘 및 육도와 해도에서 사용하고 있는 평면 직교좌표계인 TM투영과 UTM투영의 알고리즘제작 하였다. 또한, 현재 항법용 GPS 센서가 가지고 있는 정확도를 검증하기 위해 GPS의 정적측량, 동적측량에 의한 오차량을 비교검토하였으며, 선박의 항로추적을 위해서 선박에서 수신된 위치 정보의 편차량을 분석하였다. 이렇게 검토된 자료를 기본으로 하여 실시간 선박항로를 추적할 수 있는 저가의 항로추적시스템 개발을 본 연구의 최종목표로 연구를 수행하였다. The most great GPS is working on CNS(Car navigation System) and Personal terminal, but ocean has not been. First studied GPS is sailing to ship but We have been connivance that The ship is not need detail navigation. Lately, harbor facilities and transportation service in harbors are complication. We have need accurate ship navigation system. In this paper, author developed algorithms of ellipsoid conversion between WGS84 and BESSEL and develope algorithms of map projection between ellipsoid coordinate system, and plane cartesian system. Author used 3-parameter in covering ellipsoids and used TM and UTM projection in converting between ellipsoid and plane cartesian coordinate. And author analyzed errors through static surveying and dynamic surveying of GPS for proving accuracy of GPS sensor, Furthermore author analyzed deflection error of received position. Finally author developed real time ship navigation system using cheep GPS sensor.

This study proposes the improvement of maritime traffic management for domestic ships and fishing vessels by introducing the e-navigation environment. This study discusses the development of present Vessel Traffic service (VTS) in a systematic aspect and a fuctional aspect. The concept and architecture of e-navigation operation system based on the General Information Center on Maritime Safety and Security (GICOMS) are proposed as a solution for the improvement of maritime traffic management in Korean coastal waters. Especially, means of data exchange between ships and ship-shore based on the Maritime Cloud and regional e-Data Center are discussed. This study will help to the implementation of the Korean e-navigation project which focuses on the safety of small ships and fishing vessels. In the future, it is needed to study for the development and operation of accident prevention system under the e-navigation environment.

The reliability of collision avoidance systems for Maritime Autonomous Surface Ships is one of the most critical factors for their safety. In particular, since many ship collisions occur in coastal areas, it is crucial to ensure the reliability of collision avoidance algorithms in geographically limited coastal waters. However, studies on maritime autonomous surface ships collision avoidance algorithms mainly focus on the traffic factor despite the importance of the geographic factor. Therefore, this study presents a methodology for establishing a practical collision avoidance system test bed, considering the geographic environment. The proposed methodology is a data-driven approach that objectively categorizes collision risk situations by extracting these risks using Automatic Identification System (AIS) and Electronic Navigational Chart (ENC) data, followed by clustering algorithms. Consequently, the research results present a direction for establishing test beds from the perspective of geographic and traffic factors.

Currently the International Maritime Organization (IMO) is taking the lead in developing e-navigation as an information service framework. E-navigation supports sharing, harmonization and utilization of various marine and marine-related data both shipboard and onshore. Recently, the IMO adopted the International Hydrographic Organization (IHO)'s S-100 as the basis of the Common Maritime Data Structure (CMDS) of e-navigation. Thus, the various data are to be provided to e-navigation services in formats consistent with the S-100 data model. E-navigation services, in order to provide appropriate information to users, utilize and harmonize many kinds of S-100-based data such as Electronic Navigation Chart (ENC) data, bathymetric data, tidal data, meteorology data, radar-image data, and Automatic Identification System (AIS) data. In e-navigation, data management systems dealing with S-100-based data facilitate e-navigation services' harmonization and utilization of the various S-100-based data. In this paper, we present an S-100 data management system that deals with various S-100-based data. We designed the system by generalization of the System ENC (SENC) kernel that manages S-101 ENC data. For development of a data management system that supports the management of various kinds of S-100-based data, we analyzed the characteristics of the S-100 data model and S-100-based data products. The S-100 data management system is designed to store S-100-based feature-oriented geographic data in the form of pairs.

Abstract. Advancements in geospatial technology have benefited the hydrographic and maritime professions in many ways. Yet, compared to hydrographic data collection and processing, chart compilation workflows remain relatively slow, mainly due to limited human resources and the availability of automated algorithms that respect nautical charting constraints and Electronic Navigational Chart (ENC) database requirements. This work presents our research efforts to streamline the nautical chart compilation process through the introduction of automated processes and improving the efficiency and accuracy of existing. Among these processes are fundamental generalization tasks such as those for soundings, islands, and depth contours; ENC product specific requirements, such as those for reducing file size through the removal of collinear vertices forming polylines and polygons; and the updating of dependent features in the ENC database after generalization of one of their shared geometries.