Early Software Reliability Prediction with Wavelet Networks Models

Role of nitric oxide in the rat hippocampal CA1 in morphine antinociception

Management technologies for improving software reliability are very important for software TQM (Total Quality Management). The quality characteristics of software reliability is that computer systems can continue to operate regularly without the occurrence of failures on software systems. In this chapter, we describe several recent developments in software reliability modeling and its applications as quantitative techniques for software quality/reliability measurement and assessment. That is, a quality engineering analysis of human factors affecting software reliability during the design-review phase, which is the upper stream of software development, and software reliability growth models based on stochastic differential equations and discrete calculus during the testing phase, which is the lower one, are discussed. And, we discuss quality-oriented software management analysis by applying the multivariate analysis method and the existing software reliability growth models to actual process monitoring data. Finally, we investigate an operational performability evaluation model for the software-based system, introducing the concept of systemability which is defined as the reliability characteristic subject to the uncertainty of the field environment.KeywordsHuman factor analysisDesign-review experimentOSS reliabilityStochastic differential equationDiscrete modelingDifference equationSoftware managementSoftware project assessmentSoftware performability modelingSystemability assessment

Non-homogeneous Poisson process (NHPP) model with typical reliability growth patterns is an important technology about evaluating software reliability. Two parameters which affect software reliability are original failures number and failure-detected rate. The paper firstly defines the software failure distributed and discusses a few kinds' software reliability models. Non-homogeneous Poisson process model is presented. The models with different parameters are discussed and analyzed. The model's restrict condition and some of parameters, original failures number and failure-detected ratio, are extrapolated. Assessment methodology about key parameters is given.

In the software industry, two software engineering development best practices coexist: open-source and closed-source software. The former has a shared code that anyone can contribute, whereas the latter has a proprietary code that only the owner can access. Software reliability is crucial in the industry when a new product or update is released. Applying meta-heuristic optimization algorithms for closed-source software reliability prediction has produced significant and accurate results. Now, open-source software dominates the landscape of cloud-based systems. Therefore, providing results on open- source software reliability - as a quality indicator - would greatly help solve the open-source software reliability growth- modelling problem. The reliability is predicted by estimating the parameters of the software reliability models. As software reliability models are inherently nonlinear, traditional approaches make estimating the appropriate parameters difficult and ineffective. Consequently, software reliability models necessitate a high- quality parameter estimation technique. These objectives dictate the exploration of potential applications of meta- heuristic swarm intelligence optimization algorithms for optimizing the parameter estimation of nonhomogeneous Poisson process-based open-source software reliability modelling. The optimization algorithms are firefly, social spider, artificial bee colony, grey wolf, particle swarm, moth flame, and whale. The applicability and performance evaluation of the optimization modelling approach is demonstrated through two real open-source software reliability datasets. The results are promising

Accurate streamflow forecasting is of great importance for the effective management of water resources systems. In this study, an improved streamflow forecasting approach using the optimal rain gauge network-based input to artificial neural network (ANN) models is proposed and demonstrated through a case study (the Middle Yarra River catchment in Victoria, Australia). First, the optimal rain gauge network is established based on the current rain gauge network in the catchment. Rainfall data from the optimal and current rain gauge networks together with streamflow observations are used as the input to train the ANN. Then, the best subset of significant input variables relating to streamflow at the catchment outlet is identified by the trained ANN. Finally, one-day-ahead streamflow forecasting is carried out using ANN models formulated based on the selected input variables for each rain gauge network. The results indicate that the optimal rain gauge network-based input to ANN models gives the best streamflow forecasting results for the training, validation and testing phases in terms of various performance evaluation measures. Overall, the study concludes that the proposed approach is highly effective to achieve the enhanced streamflow forecasting and could be a viable option for streamflow forecasting in other catchments.

In reality, the fault detection (or correction) phenomenon and software reliability estimation in the operational phase are different from that in the testing phase. The fault removal continues at a slower rate during the operational phase. In this paper, we will investigate some techniques for software reliability prediction and measurement in the operational phase. We first review how some software reliability growth models (SRGMs) based on non-homogeneous Poisson processes (NHPPs) can be readily derived based on a unified theory for NHPP models. Under this general framework, we can not only verify some conventional SRGMs but also derive some new SRGMs that can be used for software reliability measurement in the operational phase. That is, based on the unified theory, we can incorporate the concept of multiple changepoints into software reliability modeling. We can formularize and simulate the fault detection process in the operational phase. Some numerical illustrations based on real software failure data are also presented. The experimental results show that the proposed models can easily reflect the possible changes of fault detection process and offer quantitative analysis on software failure behavior in field operation.

Bio-oil production from rice husk, an abundant agricultural residue, has gained significant attention as a sustainable and renewable energy source. The current research aims to employ artificial neural network (ANN) and support vector machine (SVM) modeling techniques for the optimization of operating parameters for bio-oil extracted from rice husk ash (RHA) through pyrolysis. ANN and SVM methods are employed to model and optimize the operational conditions, including temperature, heating rate, and feedstock particle size, to enhance the yield and quality of bio-oil. Additionally, ANN modeling is utilized to create a predictive model for bio-oil properties, allowing for the efficient optimization of pyrolysis conditions. This research provides valuable insights into the production and properties of bio-oil from RHA. By harnessing the capabilities of ANN and SVM, this research not only aids in understanding the intricate relationships between process variables and bio-oil properties but also provides a means to systematically enhance the production process. The predictive results obtained from the ANN were found to be good when compared with the SVM. Several models with different numbers of neurons have been trained with different transfer functions. R values for the training, validation, and test phases are around 1.0, i.e., 0.9981, 0.9976, and 0.9978, respectively. The overall R-value was 0.9960 for the proposed network. The findings were considered acceptable, as the overall R-value was close to 1.0. The optimized operational parameters contribute to the efficient conversion of RHA into bio-oil, thereby promoting the use of this sustainable resource for renewable energy production. This approach aligns with the growing emphasis on reducing the environmental impact of traditional fossil fuels and advancing the utilization of alternative and environmentally friendly energy sources.

ABSTRACTStatistical methods such as Poisson distribution, negative binomial regression (NB), and zero inflated negative binomial regression (ZINB) have generally been used in road safety studies to establish the complex relationships between variables. Over the last few years, the artificial neural networks (ANN) model has also been used. The ANN model does not have any prior limitations such as the equality condition of mean and variance observed in Poisson regression. However, though the ANN model has been used in the analysis of different accident types, to the best of our knowledge, no study has used the ANN model for establishing this relationship with truck accident data on divided multilane interurban roads. In this study, the road sections D750/07–D750/15 in Ankara–Aksaray–Eregli, Turkey, were considered and truck accident data from 2008 to 2011 were analyzed using NB and ANN. The analysis show that the ANN model has lower errors and higher R2 values than NB and performs slightly better than NB for predicting the number of trucks involved in accidents. Based on a comparison of performances the study concludes, that ANN could be used as an alternative model for analyzing truck accident data on divided multilane interurban roads in Turkey.

Monthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform

Nitric acid production plants emit small amounts of nitrogen oxides (NOx) to the environment. As the regulatory authorities demand the reduction of the resulting air pollution, existing plants are looking for economical ways to comply with this demand. Several Artificial Neural Networks (ANN) models were trained from several months of operating plant data to predict the NOx concentration in the tail gas, and their total amount emitted the environment. The training of the ANN model was done by the Guterman-Boger algorithm set that generates a non-random initial connection weights, suggests a small number of hidden neurons, avoids, and escapes from, local minima encountered during the training. The ANN models gave small errors, 0.6% relative error on the NOx concentration prediction and 0.006 kg/hour on daily emission in the 20-45 kg NOx/hour range. Knowledge extraction from the trained ANN models revealed the underlying relationships between the plant operating variables and the NOx emission rate, especially the beneficial effect of cooling the absorbed gas and reticulating liquids in the absorption towers. Clustering the data by the patterns of the hidden neurons outputs of auto-associative ANN models of the same data revealed interesting insights.

In this paper, we propose an artificial neural- network-based approach for software reliability estimation and modeling. We first explain the network networks from the mathematical viewpoints of software reliability modeling. That is, we will show how to apply neural network to predict software reliability by designing different elements of neural networks. Furthermore, we will use the neural network approach to build a dynamic weighted combinational model. The applicability of proposed model is demonstrated through four real software failure data sets. From experimental results, we can see that the proposed model significantly outperforms the traditional software reliability models.

Purpose – This paper aims to predict the needle penetration force (NPF) in denim fabrics using the artificial neural network (ANN) and multiple linear regression (MLR) models based on the effects of various sewing parameters. Design/methodology/approach – In order to design the ANN and MLR models, four parameters including fabric weight, number of fabric layers, weave pattern, and sewing needle size are taken into account as the input parameters and NPF as the output parameter. According to these parameters, 140 samples of data were resulted. Each sample was tested five times. From these 140 data (input-output data pairs), 112 were used for training the ANN and MLR models and 28 samples were used to test the performance of ANN and MLR. Also, the NPF was measured on the Instron tensile tester to simulate sewing process. Findings – The results indicated that the NPF in denim fabrics can be well predicted in terms of sewing parameters by using ANN and MLR models, in which the ANN model exhibits greater performance than MLR (RANN=0.989> RMLR=0.901). Research limitations/implications – The NPF measurement method is limited at low speed. Originality/value – Using the ANN model for forecasting NPF in denim fabrics can help the garment manufactures to produce high-quality denim products and improve the sewing process through reducing seam damage. The NPF could be also measured in the cycle loading conditions similar to sewing machine process by using a special designed tools mounted on the Instron tensile tester.

The relationships between physico-chemical and rheological properties are considered complex nonlinear systems. Thus, the artificial neural network (ANN) and regression models were used for the rheological characterization of Brazilian honeys, based on low-cost measurements of water content and temperature. The steady shear viscosity (η) performed well when measured in the test phase in a 2-12-1 neuron multilayer perceptron (MLP) ANN (model 1) with a root mean square error (RMSE) and correlation coefficient (r) equal to 0.0430 and 0.9681, respectively. The parameter loss modulus (G″), storage modulus (G′) and complex viscosity (η*) were predicted in the temperature sweep test by small amplitude oscillatory shear (SAOS) measurements during heating and cooling, and the MLP ANNs with architectures of 2-9-3 (model 2) and 2-3-3 (model 3) showed RMSE values equal to 0.0261 and 0.0387 in the test phase, respectively. For all the determined parameters, non-linear exponential models showed similar results to models 1, 2 and 3. An ANN with 3-9-3 architecture (model 4) showed RMSE and r for G′ equal to 0.0158 and 0.7301, for G″ equal to 0.0176 and 0.9581, and for η* equal to 0.0407 and 0.9647, respectively, in the test phase for date of the frequency sweep test obtained by SAOS. These results were far superior to those obtained by second-order multiple linear models. The acquisition of all models is an important application for the processing of honey and honey-based products, since these properties are essential in engineering calculations and quality control of products.

The purpose of this study was to validate the use of artificial neural network (ANN) models for predicting quality of life (QOL) after breast cancer surgery and to compare the predictive capability of ANNs with that of linear regression (LR) models. The European Organization for Research and Treatment of Cancer Quality of Life Questionnaire and its supplementary breast cancer measure were completed by 402 breast cancer patients at baseline and at 2 years postoperatively. The accuracy of the system models were evaluated in terms of mean square error (MSE) and mean absolute percentage error (MAPE). A global sensitivity analysis was also performed to assess the relative significance of input parameters in the system model and to rank the variables in order of importance. Compared to the LR model, the ANN model generally had smaller MSE and MAPE values in both the training and testing datasets. Most ANN models had MAPE values ranging from 4.70 to 19.96 %, and most had high prediction accuracy. The ANN model also outperformed the LR model in terms of prediction accuracy. According to global sensitivity analysis, pre-operative functional status was the best predictor of QOL after surgery. Compared with the conventional LR model, the ANN model in the study was more accurate for predicting patient-reported QOL and had higher overall performance indices. Further refinements are expected to obtain sufficient performance improvements for its routine use in clinical practice as an adjunctive decision-making tool.

The present investigation introduces a robust soft computing model by comparing twelve least square support vector machine (LSSVM), six long short-term memory (LSTM), and thirty-six artificial neural network (ANN) models to predict the unconfined compressive strength (UCS) of fine-grained soil. For that purpose, a database of fine content, dry unit weight, porosity, void ratio, degree of saturation, and specific gravity results of 85 soil specimens has been compiled from the literature. 75 and 10 soil specimens were trained and tested for each model. Six training databases have been prepared to analyze the effect of quality and quantity of training database by selecting 50%, 60%, 70%, 80%, 90%, and 100% of 75 soil specimens. The performance comparison demonstrated that the LSTM model (MD 113) requires fewer training datasets (50% of 75) than the LSSVM (MD 102 and MD 108) and ANN (MD 120, MD 127, MD 136, MD139, MD 148, and MD 150) models. Also, it was observed that the nonlinear LSSVM model (MD 108) is unaffected by multicollinearity in training datasets and predicted UCS better than the linear LSSVM model (MD 102). Furthermore, the Levenberg-Marquardt neural network model (MD 120) has outperformed the other ANN models with the root mean square error (RMSE) of 5.1214 N/cm2, the mean absolute error (MAE) of 4.1379 N/cm2, and correlation (R) of 0.9836. The overall performance comparison revealed that the LSTM model is more potent than the LSSVM and ANN models. The LSTM model predicted the UCS of fine-grained soil with the RMSE of 4.7539 N/cm2, the MAE of 4.2461 N/cm2, and R of 0.9880. Conversely, cosine amplitude sensitivity analysis demonstrated that the fine content and dry unit weight influence the prediction of virgin UCS of fine-grained soils.