EasyAug: An Automatic Textual Data Augmentation Platform for Classification Tasks

This paper presents an Attention-based Data Augmentation (ADA) approach that extracts keywords from minority class data points using a vector similarity-based mechanism, uses the extracted keywords to extract significant contextual words from minority class documents using an attention mechanism, and uses the significant contextual words to enrich the minority class dataset. By creating new documents based on significant contextual words and adding them to the minority class dataset, we oversample the dataset for the minority class. On the classification job, we compare the original and oversampled versions of the datasets. We also compare ADA over the augmented datasets with two popular state-of-the-art text data augmentation methods. According to the experimental findings, classification algorithms perform better when used to augmented datasets produced by any data augmentation technique than when applied to the datasets’ original versions. Additionally, the classifiers trained over the augmented datasets generated by ADA are more effective than those generated by state-of-the-art data augmentation techniques.

Text-to-speech synthesis (TTS) has been used as a data augmentation approach for automatic speech recognition (ASR), leveraging additional texts for ASR training. However, in low resource tasks, usually only a limited number of speakers are available, leading to the lack of speaker variations in synthetic speech. In this paper, we propose a novel speaker augmentation approach which can synthesize data with sufficient speaker and text diversity. Here, an end-to-end TTS system is trained with speaker representations from a variational auto-encoder (VAE), which enables TTS to synthesize speech from unseen new speakers via sampling from the trained latent distribution. As a new type of data augmentation approach, speaker augmentation can be combined with traditional feature augmentation approaches, such as SpecAugment. Experiments on a switchboard task show that, given 50 hours of data, the proposed speaker augmentation with SpecAugment significantly reduces word error rate (WER) by 30% relative compared to the system without any data augmentation, and about 18% relative compared to the system with SpecAugment.

Improving the prediction of extreme wind speed events with generative data augmentation techniques

Most Facial Expression Recognition (FER) systems rely on machine learning approaches that require large databases for an effective training. As these are not easily available, a good solution is to augment the databases with appropriate data augmentation (DA) techniques, which are typically based on either geometric transformation or oversampling augmentations (e.g., generative adversarial networks (GANs)). However, it is not always easy to understand which DA technique may be more convenient for FER systems because most state-of-the-art experiments use different settings which makes the impact of DA techniques not comparable. To advance in this respect, in this paper, we evaluate and compare the impact of using well-established DA techniques on the emotion recognition accuracy of a FER system based on the well-known VGG16 convolutional neural network (CNN). In particular, we consider both geometric transformations and GAN to increase the amount of training images. We performed cross-database evaluations: training with the "augmented" KDEF database and testing with two different databases (CK+ and ExpW). The best results were obtained combining horizontal reflection, translation and GAN, bringing an accuracy increase of approximately 30%. This outperforms alternative approaches, except for the one technique that could however rely on a quite bigger database.

Cyber-physical systems have recently been used in several areas (such as connected and autonomous vehicles) due to their high maneuverability. On the other hand, they are susceptible to cyber-attacks. Radio frequency (RF) fingerprinting emerges as a promising approach. This work aims to analyze the impact of decoupling tapped delay line and clustered delay line (TDL+CDL) augmentation-driven deep learning (DL) on transmitter-specific fingerprints to discriminate malicious users from legitimate ones. This work also considers 5G-only-CDL, WiFi-only-TDL augmentation approaches. RF fingerprinting models are sensitive to changing channels and environmental conditions. For this reason, they should be considered during the deployment of a DL model. Data acquisition can be another option. Nonetheless, gathering samples under various conditions for a train set formation may be quite hard. Consequently, data acquisition may not be feasible. This work uses a dataset that includes 5G, 4G, and WiFi samples, and it empowers a CDL+TDL based augmentation technique in order to boost the learning performance of the DL model. Numerical results show that CDL+TDL, 5G-only-CDL, and WiFi-only-TDL augmentation approaches achieve 87.59%, 81.63%, 79.21% accuracy on unobserved data while TDL/CDL augmentation technique and no augmentation approach result in 77.81% and 74.84% accuracy on unobserved data, respectively.

One of the common challenges in medical artificial intelligence (AI) applications using echocardiography is the lack of image data harmonization. This study aims to improve the prediction accuracy of left ventricular ejection fraction (LVEF) AI models by incorporating data augmentation (DA) techniques to address the variability in image data across different vendor machines. A database comprising 15,770 echocardiographic videos from 3154 patients across five different centers was utilized, with the data acquired using various vendor machines. We prepared datasets specific to GE healthcare (GE), philips (PH), and canon medical systems (CA) vendors, including 1911, 804, and 427 cohorts, respectively. A three-dimensional convolutional neural network (3D-CNN) was trained to predict LVEF, using videos consisting of 20 images per heartbeat as input, with training performed exclusively on data from GE machines (GE-based model). DA techniques, including gamma correction, scaling, median filtering, unsharp masking, translation, rotation, noise correction, and image conversion using a cycle generative adversarial network, were applied. A regression analysis using five different chamber views was performed on the GE test data. The accuracy of LVEF prediction using the GE-based model with DA—specifically gamma correction, scaling, and translation corrections—was excellent. The mean absolute error (root mean square error) in test cohorts was 4.33 (5.58) for GE, 4.42 (5.57) for PH, and 4.89 (6.57) for CA, which were comparable to the results of a model developed using data from all vendors, demonstrating the effectiveness of DA in harmonizing images. This study demonstrates that echocardiographic videos are transferable across vendors and that DA is highly effective in improving LVEF predictions from data acquired using different vendor machines.Supplementary InformationThe online version contains supplementary material available at 10.1038/s41598-025-21277-y.

The emergent of machine learning (ML) and deep learning (DL) methods have created a substantial window of chance for their use in the industry. Given that both ML and DL algorithms are capable of identifying links between enormous amounts of data, one of the jobs for which these techniques have the most potential is visual inspection. These methods, nevertheless, call for a lot of photographs, which are not always possible to capture. Techniques for data augmentation are used as a remedy for this. Many datasets are created utilizing data augmentation approaches based on geometric transformations, starting from a very unbalanced dataset containing photos of various medical images. Many datasets are created utilizing data augmentation approaches based on geometric transformations, starting from a very unbalanced dataset containing photos of various medical images. The geometric transformation-based data augmentation segments the infected area and the classification process is proposed to highlight the severity of the disease. The proposed suggests an impartial and all-encompassing framework of evaluation for various information augmentation techniques. With this cutting-edge procedure, various augmented techniques are thoroughly and accurately assessed regarding data diversity and classification accurateness utilizing massive public datasets already available. In order to replicate the typical moderate size datasets used in deep learning, a regular-interval sampling strategy constructed on similarity ranking is described that can be used to choice samples from enormous open datasets and produce a subset that can accurately represent the original set. Then, using a variety of data augmentation methods, the augmented datasets are created from the small-sized datasets.

Mammography is the primary procedure for breast cancer screening, attempting to reduce breast cancer mortality risk with early detection. Deep learning methods have shown strong applicability to various medical images datasets. Due to paucity of available labeled medical images, accurate computer assisted diagnosis requires intensive data augmentation (DA) techniques, such as geometric/intensity transformations of original images. This data when used along with the training data helps to address the limited medical image dataset collected from various sources. Generative Adversarial Networks (GANs) is one of the DA techniques. GAN trained on images can generate new images that contain many authentic characteristics and look realistic to human observers. Therefore, this paper focuses on overcoming the problem of limited labeled dataset, using Deep Convolution GANs (DCGANs). To analyze the closeness between the original and synthetic images, a visualization tool ImageJ was used. In order to validate the proposed model, a visual Turing test was conducted with the help of medical experts.

Recent deep neural network models trained on smaller and less diverse datasets use data augmentation to alleviate limitations such as overfitting, reduced robustness, and lower generalization. Methods using 3D datasets are among the most common to use data augmentation techniques such as random point drop, scaling, translation, rotations, and jittering. However, these data augmentation techniques are fixed and are often applied to the entire object, ignoring the object’s local geometry. Different local neighborhoods on the object surface hold a different amount of geometric complexity. Applying the same data augmentation techniques at the object level is less effective in augmenting local neighborhoods with complex structures. This paper presents PatchAugment, a data augmentation framework to apply different augmentation techniques to the local neighborhoods. Our experimental studies on PointNet++ and DGCNN models demonstrate the effectiveness of PatchAugment on the task of 3D Point Cloud Classification. We evaluated our technique against these models using four benchmark datasets, ModelNet40 (synthetic), ModelNetlO (synthetic), SHREC’16 (synthetic) and ScanObjectNN (real-world).

Eye-tracking technology enables communication for individuals with muscle control difficulties, making it a valuable assistive tool. Traditional systems rely on electrooculography (EOG) or infrared devices, which are accurate but costly and invasive. While vision-based systems offer a more accessible alternative, they have not been extensively explored for eye-writing recognition. Additionally, the natural instability of eye movements and variations in writing styles result in inconsistent signal lengths, which reduces recognition accuracy and limits the practical use of eye-writing systems. To address these challenges, we propose a novel vision-based eye-writing recognition approach that utilizes a webcam-captured dataset. A key contribution of our approach is the introduction of a Discrete Fourier Transform (DFT)-based length normalization method that standardizes the length of each eye-writing sample while preserving essential spectral characteristics. This ensures uniformity in input lengths and improves both efficiency and robustness. Moreover, we integrate a hybrid deep learning model that combines 1D Convolutional Neural Networks (CNN) and Temporal Convolutional Networks (TCN) to jointly capture spatial and temporal features of eye-writing. To further improve model robustness, we incorporate data augmentation and initial-point normalization techniques. The proposed system was evaluated using our new webcam-captured Arabic numbers dataset and two existing benchmark datasets, with leave-one-subject-out (LOSO) cross-validation. The model achieved accuracies of 97.68% on the new dataset, 94.48% on the Japanese Katakana dataset, and 98.70% on the EOG-captured Arabic numbers dataset—outperforming existing systems. This work provides an efficient eye-writing recognition system, featuring robust preprocessing techniques, a hybrid deep learning model, and a new webcam-captured dataset.

Hate speech is a harmful form of expression that promotes discrimination, hostility, and prejudice towards a specific group of individuals or communities. It has become increasingly essential to develop effective methods for detecting hate speech on online platforms to promote inclusivity and protect individuals from the negative effects of such speech. Despite its importance due to the rising use of multilingual social media platforms, hate speech/offensive language (HS/OL) detection in code‐mixed (CM) languages has not gotten the same level of attention from the research community as that of monolingual cases. CM languages pose a challenge due to mixing multiple languages within a single sentence or text, which leads to difficulties in text representation and language modeling. In addition, data imbalance is a common issue in HS/OL detection, as it is often a rare event, and the majority class tends to dominate the dataset. The present study suggests a new method for addressing these challenges by using data augmentation techniques to balance the dataset and leveraging transfer learning to improve model performance. The presented method was assessed in the Malayalam–English Code‐mix language, which poses additional challenges for HS/OL detection due to limited labeled data and lack of resources. The outcomes of the method indicate its effectiveness as the weighted F1 score exceeds 0.98, exceeding the effectiveness of the most advanced and up‐to‐date models. In addition to its effectiveness, the model's explainability is enhanced through a technique showcased in the paper that visualizes each neuron's output in the transfer models' last layer. This technique highlights the disparate firing patterns of the neurons when presented with offensive and non‐offensive inputs.

A problem with convolutional neural networks (CNNs) is that they require large datasets to obtain adequate robustness; on small datasets, they are prone to overfitting. Many methods have been proposed to overcome this shortcoming with CNNs. In cases where additional samples cannot easily be collected, a common approach is to generate more data points from existing data using an augmentation technique. In image classification, many augmentation approaches utilize simple image manipulation algorithms. In this work, we propose some new methods for data augmentation based on several image transformations: the Fourier transform (FT), the Radon transform (RT), and the discrete cosine transform (DCT). These and other data augmentation methods are considered in order to quantify their effectiveness in creating ensembles of neural networks. The novelty of this research is to consider different strategies for data augmentation to generate training sets from which to train several classifiers which are combined into an ensemble. Specifically, the idea is to create an ensemble based on a kind of bagging of the training set, where each model is trained on a different training set obtained by augmenting the original training set with different approaches. We build ensembles on the data level by adding images generated by combining fourteen augmentation approaches, with three based on FT, RT, and DCT, proposed here for the first time. Pretrained ResNet50 networks are finetuned on training sets that include images derived from each augmentation method. These networks and several fusions are evaluated and compared across eleven benchmarks. Results show that building ensembles on the data level by combining different data augmentation methods produce classifiers that not only compete competitively against the state-of-the-art but often surpass the best approaches reported in the literature.

Deep learning has revolutionized the performance of classification and object detection, but meanwhile demands sufficient labeled data for training. Given insufficient data, while many techniques have been developed to help combat overfitting, the challenge remains if one tries to train deep networks, especially in the ill-posed <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">extremely low data regimes</i> : only a small set of labeled data are available, and nothing – including unlabeled data – else. Such regimes arise from practical situations where not only data labeling but also data collection itself is expensive. We propose a deep adversarial data augmentation (DADA) technique to address the problem, in which we elaborately formulate data augmentation as a problem of training a class-conditional and supervised generative adversarial network (GAN). Specifically, a new discriminator loss is proposed to fit the goal of data augmentation, through which both real and augmented samples are enforced to contribute to and be consistent in finding the decision boundaries. Tailored training techniques are developed accordingly. To quantitatively validate its effectiveness, we first perform extensive simulations to show that DADA substantially outperforms both traditional data augmentation and a few GAN-based options. We then extend experiments to three real-world small labeled classification datasets where existing data augmentation and/or transfer learning strategies are either less effective or infeasible. We also demonstrate that DADA to can be extended to the detection task. We improve the pedestrian synthesis work by substitute for our discriminator and training scheme. Validation experiment shows that DADA can improve the detection mean average precision (mAP) compared with some traditional data augmentation techniques in object detection. Source code is available at <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://github.com/SchafferZhang/DADA</uri> .

The extensive utilization of drones has led to numerous scenarios that encompass both advantageous and perilous outcomes. By using deep learning techniques, this study aimed to reduce the dangerous effects of drone use through early detection of drones. The purpose of this study is the evaluation of deep learning approaches such as pre-trained YOLOv8 drone detection for security issues. This study focuses on the YOLOv8 model to achieve optimal performance in object detection tasks using a publicly available dataset collected by Mehdi Özel for a UAV competition that is sourced from GitHub. These images are labeled using Roboflow, and the model is trained on Google Colab. YOLOv8, known for its advanced architecture, was selected due to its suitability for real-time detection applications and its ability to process complex visual data. Hyperparameter tuning and data augmentation techniques were applied to maximize the performance of the model. Basic hyperparameters such as learning rate, batch size, and optimization settings were optimized through iterative experiments to provide the best performance. In addition to hyperparameter tuning, various data augmentation strategies were used to increase the robustness and generalization ability of the model. Techniques such as rotation, scaling, flipping, and color adjustments were applied to the dataset to simulate different conditions and variations. Among the augmentation techniques applied to the specific dataset in this study, rotation was found to deliver the highest performance. Blurring and cropping methods were observed to follow closely behind. The combination of optimized hyperparameters and strategic data augmentation allowed YOLOv8 to achieve high detection accuracy and reliable performance on the publicly available dataset. This method demonstrates the effectiveness of YOLOv8 in real-world scenarios, while also highlighting the importance of hyperparameter tuning and data augmentation in increasing model capabilities. To enhance model performance, dataset augmentation techniques including rotation and blurring are implemented. Following these steps, a significant precision value of 0.946, a notable recall value of 0.9605, and a considerable precision–recall curve value of 0.978 are achieved, surpassing many popular models such as Mask CNN, CNN, and YOLOv5.

In analysis of data, data augmentation pertains to ways to raise the availability of data yappending slightly tweaked copies of current data or creating new generated information from the collected data. Data augmentation can assist improve the performance and output of machine learning models by producing new and varied cases to train datasets. Data augmentation techniques, which produce deviations that the model could meet in the real world, might make machine learning models more robust. This research study suggest the use of such audio data augmentation to solve the challenges of data scarcity, and further the impact of various part of this approach is also investigated. The suggested model generates cutting-edge findings for system environmental sound prediction. With the aid of the function, we can also use the 4 kinds of data augmentation to improve the data and show the outcome in an effective manner. Data augmentation is well known for combating over fitting and improving the generalization capabilities of both the input and output systems. The proposed system's recognition performance has improved as a result of the experiments done with four augmentation techniques those are Random Sequential, Random Independent, Specified Sequential, Specified Independent.